binutils-gdb

Commit Graph

Author	SHA1	Message	Date
gerald	a903d6ac5a	Fix up ChangeLog entries (name, e-mail, formatting, otherwise). git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@203992 138bc75d-0d04-0410-961f-82ee72b054a4	13 years ago
sterling	36cff971e2	2013-10-22 Sterling Augustine <saugustine@google.com> * gdb/gdb-index.h: Merge from gdb tree. git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@203931 138bc75d-0d04-0410-961f-82ee72b054a4	13 years ago
H.J. Lu	d56da83e58	Remove CpuNop from CPU_K6_2_FLAGS PR gas/16140 * i386-gen.c (cpu_flag_init): Remove CpuNop from CPU_K6_2_FLAGS. * i386-init.h: Regenerated.	13 years ago
H.J. Lu	94d60ebd79	Remove strayed entry	13 years ago
Tom Tromey	52554a0e32	constify to_detach This patch constifies the target_ops method to_detach. This is a small cleanup, but also, I think, a bug-prevention fix, since gdb already acts as if the "args" argument here was const. In particular, top.c:quit_force calls kill_or_detach via iterate_over_inferiors. kill_or_detach calls target_detach, passing the same argument each time. So, if one of these methods was not const-correct, then kill_or_detach would change its behavior in a strange way. I could not build every target I modified in this patch. I've inspected them all by hand, though. Many targets do not use the "args" parameter; a couple pass it to atoi; and a few pass it on to the to_detach method of the target beneath. The only code that required a real change was in linux-nat.c, and that only needed the introduction of a temporary variable for const-correctness. 2013-11-08 Tom Tromey <tromey@redhat.com> * aix-thread.c (aix_thread_detach): Update. * corelow.c (core_detach): Update. * darwin-nat.c (darwin_detach): Update. * dec-thread.c (dec_thread_detach): Update. * gnu-nat.c (gnu_detach): Update. * go32-nat.c (go32_detach): Update. * inf-ptrace.c (inf_ptrace_detach): Update. * inf-ttrace.c (inf_ttrace_detach): Update. * linux-fork.c (linux_fork_detach): Update. * linux-fork.h (linux_fork_detach): Update. * linux-nat.c (linux_nat_detach): Update. Introduce "tem" local for const-correctness. * linux-thread-db.c (thread_db_detach): Update. * monitor.c (monitor_detach): Update. * nto-procfs.c (procfs_detach): Update. * procfs.c (procfs_detach): Update. * record.c (record_detach): Update. * record.h (record_detach): Update. * remote-m32r-sdi.c (m32r_detach): Update. * remote-mips.c (mips_detach): Update. * remote-sim.c (gdbsim_detach): Update. * remote.c (remote_detach_1, remote_detach) (extended_remote_detach): Update. * sol-thread.c (sol_thread_detach): Update. * target.c (target_detach): Make "args" const. (init_dummy_target): Update. * target.h (struct target_ops) <to_detach>: Make argument const. (target_detach): Likewise. * windows-nat.c (windows_detach): Update.	14 years ago
Doug Evans	79600f4f1b	Fix email address in earlier entry.	13 years ago
Doug Evans	204b53315d	PR 11786 * solib-svr4.c (svr4_exec_displacement): Ignore filesz, memsz, flags and align fields for PT_GNU_RELRO segments. testsuite/ * gdb.base/gcore-relro-pie.c: New file. * gdb.base/gcore-relro-pie.exp: New file.	13 years ago
Doug Evans	459d52c84a	Add pretty-printing of .debug_gnu_pubnames, .debug_gnu_pubtypes. * dwarf.c (get_gdb_index_symbol_kind_name): New function. (display_debug_pubnames_worker): Renamed from display_debug_pubnames. Add support for .debug_gnu_pubnames, .debug_gnu_pubtypes. (display_debug_pubnames, display_debug_pubnames_gnu): New functions. (display_gdb_index): Redo printing of symbol kind. (debug_displays): Add .debug_gnu_pubnames, .debug_gnu_pubtypes. * dwarf.h (dwarf_section_display_enum): Add gnu_pubnames, gnu_pubtypes. * readelf.c (process_section_headers): Add gnu_pubnames, gnu_pubtypes.	13 years ago
Alan Modra	fcb8d9c2f4	daily update	13 years ago
Roland McGrath	64b384e1e8	Set CPU type in BFD backend for x86_64-nacl* and i?86-nacl* targets bfd/ * archures.c (bfd_mach_i386_nacl): Fix definition so it doesn't collide with bfd_mach_l1om. * bfd-in2.h: Regenerate. * elf32-i386.c (elf32_i386_nacl_elf_object_p): New function. (elf_backend_object_p): Use that in elf32-i386-nacl definition. * elf64-x86-64.c (elf64_x86_64_nacl_elf_object_p): New function. (elf_backend_object_p): Use that in elf64-x86-64-nacl definition. (elf32_x86_64_nacl_elf_object_p): New function. (elf_backend_object_p): Use that in elf32-x86-64-nacl definition. binutils/ * objdump.c (dump_dwarf): Grok bfd_mach_x86_64_nacl and bfd_mach_x64_32_nacl as equivalent to bfd_mach_x86_64. ld/testsuite/ * ld-x86-64/x86-64.exp (mixed1, mixed2): Loosen error string match so it accepts "i386:nacl" in place of "i386". * ld-x86-64/ilp32-2.d: Likewise. * ld-x86-64/ilp32-3.d: Likewise. * ld-x86-64/lp64-2.d: Likewise. * ld-x86-64/lp64-3.d: Likewise.	13 years ago
Will Newton	d40af490aa	sim/ChangeLog: Correct bug number in previous commit.	13 years ago
Will Newton	1ed6c797ef	sim/arm: Prevent crash when running sim with no binary. 2013-11-07 Will Newton <will.newton@linaro.org> PR gdb/15508 * arm/wrapper.c (sim_create_inferior): Call init before accessing STATE.	13 years ago
Will Newton	8782aa321e	sim/arm: Prevent NULL pointer dereference in sim_create_inferior. 2013-11-07 Will Newton <will.newton@linaro.org> PR gdb/9195 * arm/wrapper.c (sim_create_inferior): Avoid calling bfd_get_mach with a NULL bfd.	13 years ago
Phil Muldoon	a22bc58c6a	2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * ChangeLog: Fix blank lines between entry and PR.	13 years ago
Phil Muldoon	92e32e33f1	2013-11-07 Phil Muldoon <pmuldoon@redhat.com> PR python/15747 * python/py-cmd.c: Add COMPLETE_EXPRESSION constant. 2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-cmd.exp: Add COMPLETE_EXPRESSION tests. * gdb.python/py-cmd.c: New File. 2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * gdb.texinfo (Commands In Python): Document COMPLETE_EXPRESSION constant.	13 years ago
Phil Muldoon	f76c27b5bd	2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * python/py-breakpoint.c (bppy_get_temporary): New function. (bppy_init): New keyword: temporary. Parse it and set breakpoint to temporary if True. 2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * gdb.python/py-breakpoint.exp: Add temporary breakpoint tests. 2013-11-07 Phil Muldoon <pmuldoon@redhat.com> * gdb.texinfo (Breakpoints In Python): Document temporary option in breakpoint constructor, and add documentation to the temporary attribute.	13 years ago
Jose E. Marchesi	d52cd232cb	2013-11-07 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-tdep.c (sparc_analyze_control_transfer): Assertion removed to allow analyzing unconditional branch instructions with PC-relative offsets of zero.	13 years ago
Yao Qi	fa4d0c4081	Remove varobj_language_string, languages and varobj_languages This patch does some cleanups, removing some language-related stuff. Note that mi_cmd_var_info_expression uses varobj_language_string, which is redundant, because we can get language name from lang->la_natural_name. varobj_language_string doesn't have "Ada", which looks like a bug to me. With this patch applied, this problem doesn't exist, because the language name is got from the same place (field la_natural_name). gdb: 2013-11-07 Yao Qi <yao@codesourcery.com> * mi/mi-cmd-var.c: Include "language.h". (mi_cmd_var_info_expression): Get language name from language_defn. * varobj.c (varobj_language_string): Remove. (variable_language): Remove declaration. (languages): Remove. (varobj_get_language): Change the type of return value. (variable_language): Remove. * varobj.h (enum varobj_languages): Remove. (varobj_language_string): Remove declaration. (varobj_get_language): Update declaration. gdb/doc: 2013-11-07 Yao Qi <yao@codesourcery.com> * gdb.texinfo (GDB/MI Variable Objects): Update doc about the output of "-var-info-expression".	13 years ago
Yao Qi	6abde28fa9	New field 'la_natural_name' in struct language_defn This patch adds "natural name" of each supported languages, which will be used by the next patch. gdb: 2013-11-07 Yao Qi <yao@codesourcery.com> * language.h (struct language_defn) <la_natural_name>: New field. * ada-lang.c (ada_language_defn): Initialize field 'la_natural_name'. * c-lang.c (c_language_defn): Likewise. (cplus_language_defn, asm_language_defn): Likewise. * d-lang.c (d_language_defn): Likewise. * f-lang.c (f_language_defn): Likewise. * go-lang.c (go_language_defn): Likewise. * jv-lang.c (java_language_defn): Likewise. * language.c (unknown_language_defn ): Likewise. (auto_language_defn): Likewise. * m2-lang.c (m2_language_defn): Likewise. * objc-lang.c (objc_language_defn): Likewise. * opencl-lang.c (opencl_language_defn): Likewise. * p-lang.c (pascal_language_defn): Likewise.	13 years ago
Yao Qi	27cd387b7c	Constify 'la_name' in struct language_defn Hi, When I add another name of language, I find field 'la_name' can be 'const char '. This patch is to constify it. gdb: 2013-11-07 Yao Qi <yao@codesourcery.com> language.c (language_str): Return const char . (add_language): Add const to 'language_names' language.h (struct language_defn) <la_name>: Add const. (language_str: Update declaration.	13 years ago
Doug Evans	01e48c0ce1	* gdb.python/py-arch.exp: Tweak test name for bad memory access test.	13 years ago
Alan Modra	20d37e9aab	daily update	13 years ago
Andreas Arnez	6682d9595e	S390: Fix TDB regset recognition When checking for the presence of the TDB regset, the current code interprets ENODATA from PTRACE_GETREGSET as an indication that the TDB regset could occur on this system, but the inferior stopped outside a transaction. However, the Linux kernel actually reports ENODATA even on systems without the transactional execution facility. Thus the logic is now changed to check the TE field in the HWCAP as well. This version also checks the existence of the TDB regset -- just to be on the safe side when running on TE-enabled hardware with a kernel that does not offer the TDB regset for some reason. gdb/ * s390-linux-nat.c (s390_read_description): Consider the TE field in the HWCAP for determining 'have_regset_tdb'. gdbserver/ * linux-s390-low.c (HWCAP_S390_TE): New define. (s390_arch_setup): Consider the TE field in the HWCAP for determining 'have_regset_tdb'.	13 years ago
Cary Coutant	1d946cb356	Fix assert failure with --emit-relocs and .eh_frame sections. gold/ PR gold/15758 * object.cc (Sized_relobj_file::do_layout): Handle .eh_frame sections before reloc sections.	13 years ago
Will Newton	b9502d3fd7	gdb/dwarf2read.c: Sanity check DW_AT_sibling values. When reading objects with corrupt debug information it is possible that the sibling chain can form a loop, which leads to an infinite loop and memory exhaustion. Avoid this situation by disregarding and DW_AT_sibling values that point to a lower address than the current entry. gdb/ChangeLog: 2013-11-06 Will Newton <will.newton@linaro.org> PR gdb/12866 * dwarf2read.c (skip_one_die): Sanity check DW_AT_sibling values. (read_partial_die): Likewise.	13 years ago
Muhammad Bilal	452a569eff	Revert "2013-11-06 Muhammad Bilal <mbilal@codesourcery.com>" This reverts commit `dd99d3d15a`.	13 years ago
Muhammad Bilal	dd99d3d15a	2013-11-06 Muhammad Bilal <mbilal@codesourcery.com> PR cli/15224 * top.c (init_main): 'set history save on' by default.	13 years ago
Pedro Alves	afa332ce95	[DOC] shell startup files, clarifications and fixes. When Bash is started non-interactively, it runs the script pointed by the BASH_ENV environment variable, not .bashrc. While at it, mention Z shell in the warning too, and mention non-interactive mode explicitly. gdb/doc/ 2013-11-06 Pedro Alves <palves@redhat.com> * gdb.texinfo (Starting) <set/show startup-with-shell>: Mention non-interactive mode. (Environment) <shell startup files warning>: Mention non-interactive mode. Mention .zshenv for Z shell, and talk about BASH_ENV instead of .bashrc for BASH.	13 years ago
Muhammad Bilal	840da61ad9	2013-11-06 Muhammad Bilal <mbilal@codesourcery.com> PR cli/16122 * top.c (command_line_input): Unify interactivity tests to use input_from_terminal_p. * event-top.c (command_line_handler): Likewise.	13 years ago
Yao Qi	6dbb67982c	Test on solib load and unload This patch is to add a test case to on the performance of GDB handling load and unload of shared library. In V4: - Handle malloc and dlopen failure, - Document test parameters. In V3, there are some changes, - Adapt to perf test framework changes. - Measure load and unload separately. In V2, there are some changes, - A new proc gdb_produce_source to produce source files. I tried to move all source file generation code out of solib.exp, but compilation step still needs to know the generated file names. I have to hard-code the file names in compilation step, which is not good to me, so I give up on this moving. - SOLIB_NUMBER -> SOLIB_COUNT - New variable SOLIB_DLCLOSE_REVERSED_ORDER to control the order of iterating a list of shared libs to dlclose them. - New variable GDB_PERFORMANCE to enable these perf test cases. - Remove dlsym call in solib.c. - Update solib.py for the updated framework. gdb/testsuite/ * lib/gdb.exp (gdb_produce_source): New procedure. * gdb.perf/solib.c: New. * gdb.perf/solib.exp: New. * gdb.perf/solib.py: New.	13 years ago
Yao Qi	71c0c61595	Mention perf test in testsuite/README gdb/testsuite: 2013-11-06 Yao Qi <yao@codesourcery.com> * README: Mention performance tests.	13 years ago
Yao Qi	f27a123653	Perf test framework This patch adds a basic framework to do performance testing for GDB. perftest.py is about the test case, testresult.py is about test results, and how are they saved. reporter.py is about how results are reported (in what format). measure.py is about measuring the execution of tests by a collection of measurements. In V5: - Simplify perftest.exp. In V4: - Rename MeasurementCPUTime to MeasurementCpuTime, - Add 'pass' in empty method, - Simplify string comparison in perftest.exp. - Rename GDB_PERFORMANCE to GDB_PERFTEST_MODE and rename GDB_PERFORMANCE_TIMEOUT to GDB_PERFTEST_TIMEOUT. In V3, there are some changes, - Add wall time measurement, cpu time measurement and vmsize measurement. - Rename SingleStatisticTestCase to TestCaseWithBasicMeasurements, which measures cpu time, wall time, and memory (vmsize). - GDB_PERFORMANCE=run\|compile\|both to control the mode of perf testing. - New GDB_PERFORMANCE_TIMEOUT to specify the timeout. - Split proc prepare to proc compile and startup. - Disable GC while doing measurements. In V2, there are several changes to address Doug and Sanimir's comments. - Add copyright header and docstring in perftest/__init__.py - Remove config.py. - Fix docstring format. - Rename classes "SingleVariable" to "SingleStatistic". - Don't extend gdb.Function in class TestCase. Add a new method run to run the test case so that we can pass parameters to test. - Allow to customize whether to warm up and to append test log. - Move time measurement into test harness. Add a new class Measurement for a specific measurement and a new class Measure to measure them for a given test case. - A new class ResultFactory to create instances of TestResult. - New file lib/perftest.exp, which is to do some preparations and cleanups to simplify each .exp file. - Skip compilation step if GDB_PERFORMANCE_SKIP_COMPILE is set. gdb/testsuite/ 2013-11-06 Yao Qi <yao@codesourcery.com> lib/perftest.exp: New. * gdb.perf/lib/perftest/__init__.py: New. * gdb.perf/lib/perftest/measure.py: New. * gdb.perf/lib/perftest/perftest.py: New. * gdb.perf/lib/perftest/reporter.py: New. * gdb.perf/lib/perftest/testresult.py: New.	13 years ago
Yao Qi	7636ccf9f2	New make target 'check-perf' and new dir gdb.perf We add a new dir gdb.perf in testsuite for all performance tests. However, current 'make check' logic will either run dejagnu in directory testsuite or iterate all gdb.* directories which has .exp files. Both of them will run tests in gdb.perf. We want to achieve: 1) typical 'make check' should not run performance tests. In each perf test case, GDB_PERFTEST_MODE is checked. If it doesn't exist, return. 2) run perf tests easily. We add a new makefile target 'check-perf'. gdb: 2013-11-06 Yao Qi <yao@codesourcery.com> Makefile.in (check-perf): New target. gdb/testsuite: 2013-11-06 Yao Qi <yao@codesourcery.com> * Makefile.in (check-perf): New target. * configure.ac (AC_OUTPUT): Output Makefile in gdb.perf. * configure: Re-generated. * gdb.perf/Makefile.in: New.	13 years ago
DJ Delorie	2bc56d6613	* elf32-rl78.c (elf32_rl78_relax_delete_bytes): Make sure relocs are loaded before trying to use them.	13 years ago
Alan Modra	a5b5d5ae56	daily update	13 years ago
Yufeng Zhang	49eec19300	gas/ * config/tc-aarch64.c (parse_sys_reg): Update to use aarch64_sys_reg; call aarch64_sys_reg_deprecated_p and warn about the deprecated system registers. gas/testsuite/ * gas/aarch64/deprecated.d: New file. * gas/aarch64/deprecated.l: New file. * gas/aarch64/deprecated.s: New file. * gas/aarch64/sysreg-1.s: Add tests. * gas/aarch64/sysreg-1.d: Add tests. include/opcode/ * aarch64.h (aarch64_sys_reg): New typedef. (aarch64_sys_regs): Change to define with the new type. (aarch64_sys_reg_deprecated_p): Declare. opcodes/ * aarch64-opc.c (F_DEPRECATED): New macro. (aarch64_sys_regs): Update; flag "spsr_svc" and "spsr_hyp" with F_DEPRECATED. (aarch64_print_operand): Call aarch64_sys_reg_deprecated_p on AARCH64_OPND_SYSREG.	13 years ago
Yufeng Zhang	68a6428382	gas/ * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_COND1. gas/testsuite/ * gas/aarch64/alias.s: Add tests. * gas/aarch64/alias.d: Update. * gas/aarch64/no-aliases.d: Update. * gas/aarch64/diagnostic.s: Add tests. * gas/aarch64/diagnostic.l: Update. * gas/aarch64/illegal.s: Add tests. * gas/aarch64/illegal.l: Update. include/opcode/ * aarch64.h (enum aarch64_operand_class): Add AARCH64_OPND_CLASS_COND. (enum aarch64_opnd): Add AARCH64_OPND_COND1. opcodes/ * aarch64-dis.c (convert_ubfm_to_lsl): Check for cond != '111x'. (convert_from_csel): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Handle AARCH64_OPND_CLASS_COND and AARCH64_OPND_COND1. (aarch64_print_operand): Handle AARCH64_OPND_COND1. * aarch64-tbl.h (aarch64_opcode_table): Use COND1 instead of COND for cinc, cset, cinv, csetm and cneg. (AARCH64_OPERANDS): Add entry for AARCH64_OPND_COND1. * aarch64-asm-2.c: Re-generated. * aarch64-dis-2.c: Ditto. * aarch64-opc-2.c: Ditto.	13 years ago
Yufeng Zhang	4e50d5f863	opcodes/ * aarch64-opc.c (set_syntax_error): New function. (operand_general_constraint_met_p): Replace set_other_error with set_syntax_error. gas/testsuite/ * gas/aarch64/diagnostic.s: Add tests of ldp/stp. * gas/aarch64/diagnostic.l: Update.	13 years ago
H.J. Lu	62d887d406	Pass ignored unresolved relocations to ld backend bfd/ PR ld/4409 * elf-bfd.h (RELOC_FOR_GLOBAL_SYMBOL): Add an argument for error ignored. * elf-m10200.c (mn10200_elf_relocate_section): Updated. * elf-m10300.c (mn10300_elf_relocate_section): Likewise. * elf32-arm.c (elf32_arm_relocate_section): Likewise. * elf32-avr.c (elf32_avr_relocate_section): Likewise. * elf32-bfin.c (bfinfdpic_relocate_section): Likewise. (bfin_relocate_section): Likewise. * elf32-cr16.c (elf32_cr16_relocate_section): Likewise. * elf32-cr16c.c (elf32_cr16c_relocate_section): Likewise. * elf32-cris.c (cris_elf_relocate_section): Likewise. * elf32-crx.c (elf32_crx_relocate_section): Likewise. * elf32-d10v.c (elf32_d10v_relocate_section): Likewise. * elf32-epiphany.c (epiphany_elf_relocate_section): Likewise. * elf32-fr30.c (fr30_elf_relocate_section): Likewise. * elf32-frv.c (elf32_frv_relocate_section): Likewise. * elf32-h8300.c (elf32_h8_relocate_section): Likewise. * elf32-hppa.c (elf32_hppa_relocate_section): Likewise. * elf32-i386.c (elf_i386_relocate_section): Likewise. * elf32-i860.c (elf32_i860_relocate_section): Likewise. * elf32-ip2k.c (ip2k_elf_relocate_section): Likewise. * elf32-iq2000.c (iq2000_elf_relocate_section): Likewise. * elf32-lm32.c (lm32_elf_relocate_section): Likewise. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Likewise. * elf32-m68k.c (elf_m68k_relocate_section): Likewise. * elf32-metag.c (elf_metag_relocate_section): Likewise. * elf32-microblaze.c (microblaze_elf_relocate_section): Likewise. * elf32-mcore.c (mcore_elf_relocate_section): Likewise. * elf32-mep.c (mep_elf_relocate_section): Likewise. * elf32-moxie.c (moxie_elf_relocate_section): Likewise. * elf32-msp430.c (elf32_msp430_relocate_section): Likewise. * elf32-mt.c (mt_elf_relocate_section): Likewise. * elf32-nios2.c (nios2_elf32_relocate_section): Likewise. * elf32-openrisc.c (openrisc_elf_relocate_section): Likewise. * elf32-ppc.c (ppc_elf_relocate_section): Likewise. * elf32-rl78.c (rl78_elf_relocate_section): Likewise. * elf32-rx.c (rx_elf_relocate_section): Likewise. * elf32-tic6x.c (elf32_tic6x_relocate_section): Likewise. * elf32-tilepro.c (tilepro_elf_relocate_section): Likewise. * elf32-s390.c (elf_s390_relocate_section): Likewise. * elf32-v850.c (v850_elf_relocate_section): Likewise. * elf32-vax.c (elf_vax_relocate_section): Likewise. * elf32-xc16x.c (elf32_xc16x_relocate_section): Likewise. * elf32-xstormy16.c (xstormy16_elf_relocate_section): Likewise. * elf32-xtensa.c (elf_xtensa_relocate_section): Likewise. * elf64-alpha.c (elf64_alpha_relocate_section): Likewise. * elf64-ia64-vms.c (elf64_ia64_relocate_section): Likewise. * elf64-mmix.c (mmix_elf_relocate_section): Likewise. * elf64-ppc.c (ppc64_elf_relocate_section): Likewise. * elf64-s390.c (elf_s390_relocate_section): Likewise. * elf64-x86-64.c (elf64_x86_64_relocate_section): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_relocate_section): Likewise. * elfxx-tilegx.c (tilegx_elf_relocate_section): Likewise. * elfnn-aarch64.c (elfNN_aarch64_relocate_section): Likewise. * elfnn-ia64.c (elfNN_ia64_relocate_section): Skip if error from RELOC_FOR_GLOBAL_SYMBOL in executable is ignored. ld/testsuite/ PR ld/4409 * ld-ia64/error1.d: New file. * ld-ia64/error1.s: Likewise. * ld-ia64/error2.d: Likewise. * ld-ia64/error3.d: Likewise.	13 years ago
Will Newton	8db49cc2de	config/tc-aarch64.c: Avoid trying to parse a vector mov as immediate. Parsing a vector mov instruction currently leads to a phantom undefined symbol being added to the symbol table. e.g.: .text mov x0, v0.D[0] Produces an undefined symbol called "v0.D". gas/ChangeLog: 2013-11-05 Will Newton <will.newton@linaro.org> PR gas/16103 * config/tc-aarch64.c (parse_operands): Avoid trying to parse a vector register as an immediate. gas/testsuite/ChangeLog: 2013-11-05 Will Newton <will.newton@linaro.org> * gas/aarch64/advsimd-mov-bad.d: New file. * gas/aarch64/advsimd-mov-bad.s: Likewise.	13 years ago
Will Newton	12b272760b	gdb/arm-tdep.c: Use filtered output in arm_print_float_info. gdb/ChangeLog: 2013-11-05 Will Newton <will.newton@linaro.org> PR gdb/7670 * arm-tdep.c (print_fpu_flags): Use filtered output routines. (arm_print_float_info): Likewise.	13 years ago
Alan Modra	dba6fa9bce	Hide ppc64 .TOC. from --export-dynamic I can't see any good reason why anyone would want a dynamic .TOC., so hide it in a way that is respected by _bfd_elf_export_symbol. This also fixes an abort in relocate_section on not finding sreloc for .TOC. * elf64-ppc.c (ppc64_elf_func_desc_adjust): Make .TOC. defined and hidden. (ppc64_elf_set_toc): Adjust.	13 years ago
Alan Modra	33e44f2eb2	Update elf64-ppc.c to use elf_link_hash_table shortcuts. These shortcuts to dynamic sections in ppc_link_hash_table predated their geneneric elf hash table equivalents. * elf64-ppc.c (struct ppc_link_hash_table): Remove got, plt, relplt, iplt, reliplt. Update all references to use elf.sgot, elf.splt, elf.srelplt, elf.iplt and elf.irelplt.	13 years ago
Alan Modra	cf2f8b3bf2	daily update	13 years ago
Tom Tromey	8120838889	switch to fully parallel mode This switches "make check" to fully parallel mode. One primary issue facing full parallelization is the overhead of "runtest". On my machine, if I "touch gdb.base/empty.exp", making a new file, and then "time runtest.exp", it takes 0.08 seconds. Multiply this by the 1008 (in my configuration) tests and you get ~80 seconds. This is the overhead that would theoretically be present if all tests were run in parallel. However, the problem isn't nearly as bad as this, for two reasons. First, you must divide by the number of jobs, assuming perfect parallelization -- reasonably true for small -j numbers, based on the results I see. Second, the current test suite parallelization approach bundles the tests, largely by directory, but also splitting up gdb.base into two halves. I was curious to see how the current bundling played out in practice, so I ran "make -j1 check RUNTEST='/bin/time runtest'". This invokes the parallel mode (thus the bundling) and then shows the time taken by each invocation of runtest. Then, I ran "/bin/time make -j3 check". (See below about -j2.) The time for the entire -j3 test run was the same as the time for "gdb.base1". What this means is that gdb.base1 is currently the time-limiting run, preventing further parallelization gains. So, I reason, whatever overhead we see from full parallelization will only be seen by "-j1" and "-j2". I then tried a -j2 test run. This does take longer than a -j3 build, meaning that the gdb.base1 job finishes and then proceeds to other runtest invocations. Finally I tried a -j2 test run with the appended patch. This was 9% slower than the -j2 run without the patch. I think that is a reasonable slowdown for what is probably a rare case. I believe this patch will yield faster test results for all -j values greater than 2. For -j3 on my machine, the test suite is a few seconds faster; I didn't try any larger -j values. For -j1, I went ahead and changed the Makefile so that, if no -j option is given, then the "check-single" mode is used. You can still use "make -j1 check" to get single-job parallel-mode, though of course there's no good reason to do so. This change is likely to speed up the plain "make check" scenario a little as we will now bypass dg-extract-results.sh. One drawback of this change is that "make -jN check" is now much more verbose. I generally only look at the .sum and .log files, but perhaps this will bother some. Another interesting question is scalability of the result. The slowest test, which limits the scalability, took 80.78 seconds. The mean of the remaining tests is 1.08 seconds. (Note that this is just a rough estimate, since there are still outliers.) This means we can run 80.78 / 1.08 =~ 74 tests in the time available. And, in this data set (slightly older than the above, but materially the same) there were 948 tests. So, I think the current test suite should scale ok up to about -j12. We could improve this number if need be by breaking up the biggest tests. 2013-11-04 Tom Tromey <tromey@redhat.com> * Makefile.in (TEST_DIRS): Remove. (TEST_TARGETS, check-parallel): Rewrite. (check-gdb.%, BASE1_FILES, BASE2_FILES, check-gdb.base%) (subdir_do, subdirs): Remove. (do-check-parallel, check/%): New targets. (clean): Remove outputs, temp, and cache directories. (saw_dash_j): New variable. (CHECK_TARGET): Use it. (check): Depend on all, site.exp. Rewrite. (check-single): Remove dependencies. (slow_tests, all_tests, reordered_tests): New variables.	13 years ago
Tom Tromey	c63ffa1f25	fix some fission tests A couple of Fission tests rely on the current directory layout. This assumption is not valid in parallel mode. This patch fixes the problem by removing the relative directory from the .S files and instead having the tests set debug-file-directory before opening the main file. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.dwarf2/fission-base.S: Remove "gdb.dwarf/". * gdb.dwarf2/fission-base.exp: Set debug-file-directory before loading binfile. * gdb.dwarf2/fission-loclists.S: Remove "gdb.dwarf/". * gdb.dwarf2/fission-loclists.exp: Set debug-file-directory before loading binfile.	13 years ago
Tom Tromey	3fef966c5f	fix some "exec" tests A few tests run an inferior that execs some other program. The name of this exec'd program is compiled in. These tests assume the current test suite directory layout, but fail in parallel mode. This patch fixes these tests by letting the .exp files pass in the directory names at compile time. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.base/foll-exec.c (main): Use BASEDIR. * gdb.base/foll-exec.exp: Define BASEDIR during compilation. * gdb.base/foll-vfork.c (main): Use BASEDIR. * gdb.base/foll-vfork.exp: Define BASEDIR during compilation. * gdb.multi/bkpt-multi-exec.c (main): Use BASEDIR. * gdb.multi/bkpt-multi-exec.exp: Define BASEDIR during compilation.	13 years ago
Tom Tromey	24890efdab	fix argv0-symlink.exp for parallel mode argv0-symlink.exp doesn't work properly if standard_output_file puts files into a per-test subdirectory. That's because it assumes that files appear in $subdir, which is no longer true. This patch fixes the problem by computing the correct directory at runtime. Tested both with and without GDB_PARALLEL on x86-64 Fedora 18. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.base/argv0-symlink.exp: Compute executable's directory dynamically.	13 years ago
Tom Tromey	c59ffcabfe	make gdb.asm parallel-safe This fixes gdb.asm to be parallel-safe. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.asm/asm-source.exp: Use standard_output_file.	13 years ago
Tom Tromey	479c8d686e	fix up gdb.server This fixes gdb.server to be parallel-safe. 2013-11-04 Tom Tromey <tromey@redhat.com> * gdb.server/file-transfer.exp: Use standard_output_file.	13 years ago

1 2 3 4 5 ...

78512 Commits (a903d6ac5a79c1fb390b9b833c891c0544502cfe) All Branches Search

78512 Commits (a903d6ac5a79c1fb390b9b833c891c0544502cfe)

All Branches