8f2eb564dd
Permit scripts to refer to the addresses of output sections which were
not created.
18 years ago
46132b50a2
*** empty log message ***
18 years ago
b6d8e665bc
daily update
18 years ago
878405a889
Don't warn about redefinitions from a --just-symbols object.
18 years ago
0dfbdef4c4
Support -d/--define-common.
18 years ago
da769d5629
Read input scripts which look like input objects with proper
serialization.
18 years ago
a7dfd0102b
* f-typeprint.c (f_print_type): Handle NULL pointer in VARSTRING
18 years ago
258c00ccb0
* infcmd.c (notice_args_read): Print result of get_inferior_args.
18 years ago
8edfe26932
* infcmd.c (kill_if_already_running): Make static. Use
target_require_runnable.
* target.c (target_require_runnable): New.
* target.h (target_require_runnable): Declare.
* gdb.texinfo (Starting): Mention always-running targets.
(Target Commands): Add an anchor for load.
(Connecting): Explain continue instead of run.
18 years ago
0d6ba1b16e
* frame.c (reinit_frame_cache): Only annotate if frames were
previously valid.
* gdb.base/annota1.exp, gdb.cp/annota2.exp: Update for fewer
frames-invalid annotations.
18 years ago
e691325a9c
2008-02-28 Pierre Muller <muller@ics.u-strasbg.fr>
* gdb.base/assign.exp: avoid same output for different tests.
18 years ago
911f096e1a
* elf32-spu.c (mark_functions_via_relocs): Don't assume that
the "->start" pointer reaches to function origin, so that we
can handle functions split over more than two sections.
(build_call_tree): Likewise.
(pasted_function): Don't attempt to set fun->start back to the
function origin, just go back one section.
18 years ago
6fe305f7fb
ChangeLog:
* regformats/reg-ppc.dat: Rename "ps" to "msr".
* regformats/reg-ppc64.dat: Likewise.
gdbserver/ChangeLog:
* configure.srv [powerpc64-*-linux*]: Add all files mentioned for
powerpc-*-linux* to srv_regobj and reg_xmlfiles.
* linux-ppc-low.c (ppc_get_pc): Support bi-arch operation.
(ppc_set_pc): Likewise.
(ppc_arch_setup): New function.
(ppc_fill_gregset): Call ppc_collect_ptrace_register instead
of collect_register.
(the_low_target): Use ppc_arch_setup as arch_setup initializer.
18 years ago
5b0a002e22
* configure.srv [powerpc64-*-linux*]: Use linux-ppc-low.o
instead of linux-ppc64-low.o.
* linux-ppc64-low.c: Remove file.
* Makefile.in (SFILES): Remove linux-ppc64-low.c.
(linux-ppc64-low.o): Remove rule.
* linux-ppc-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(ppc_regmap): Conditionally define depending on __powerpc64__.
(ppc_cannot_store_register): Do not special-case "fpscr" when
compiled on __powerpc64__.
(ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): New function.
(ppc_breakpoint): Change type to "unsigned int".
(ppc_breakpoint_at): Change type of "insn" to "unsigned int".
(the_low_target): Conditionally provide initializers for the
arch_setup member depending on __powerpc64__. Install
collect_ptrace_register and supply_ptrace_register members.
18 years ago
9b4b61c8db
ChangeLog:
* features/Makefile (%.dat): Emit xmltarget statement.
* regformats/regdat.sh: Support xmltarget and xmlarch statments.
Generate code to set gdbserver_xmltarget in init_registers_${name}.
* regformats/arm-with-iwmmxt.dat: Regenerate.
* regformats/mips64-linux.dat: Regenerate.
* regformats/mips-linux.dat: Regenerate.
* regformats/rs6000/powerpc-32.dat: Regenerate.
* regformats/rs6000/powerpc-64.dat: Regenerate.
* regformats/rs6000/powerpc-e500.dat: Regenerate.
* regformats/reg-arm.dat: Add xmlarch statement.
* regformats/reg-i386.dat: Likewise.
* regformats/reg-i386-linux.dat: Likewise.
* regformats/reg-x86-64-linux.dat: Likewise.
* regformats/reg-spu.dat: Likewise.
gdbserver/ChangeLog:
* regcache.h (gdbserver_xmltarget): Add extern declaration.
* server.c (gdbserver_xmltarget): Define.
(get_features_xml): Use it to replace "target.xml" and arch_string.
* configure.srv: Remove srv_xmltarget. Add XML files that were
mentioned there to srv_xmlfiles instead. Remove conditional tests
on gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe; set
srv_xmlfiles and srv_regobj to include all possible choices.
* configure.ac (srv_xmltarget): Remove.
(srv_xmlfiles): Do not add "target.xml".
(gdb_cv_arm_iwmmxt, gdb_cv_ppc_altivec, gdb_cv_ppc_spe): Remove
checks for supplementary target information.
* configure: Regenerate.
* Makefile.in (XML_TARGET): Remove.
(target.xml): Remove rule.
(clean): Do not clean up target.xml.
(.PRECIOUS): Do not mention target.xml.
* target.h (struct target_ops): Remove arch_string member.
* linux-low.c (linux_arch_string): Remove.
(linux_target_ops): Remove arch_string initializer.
* linux-low.h (struct linux_target_ops): Remove arch_string member.
* linux-i386-low.c (the_low_target): Remove arch_string initializer.
* linux-x86-64-low.c (the_low_target): Remove arch_string initializer.
* spu-low.c (spu_arch_string): Remove.
(spu_target_ops): Remove arch_string initializer.
* win32-low.c (win32_arch_string): Remove.
(win32_target_ops): Remove arch_string initializer.
* win32-low.h (struct win32_target_ops): Remove arch_string member.
* win32-arm-low.c (the_low_target): Remove arch_string initializer.
* win32-i368-low.c (the_low_target): Remove arch_string initializer.
18 years ago
919ed24cbc
Don't check assertions until symbols are finalized. Create an output
section if the script uses a data statement with no input sections.
Don't create a loadable segment for the headers if there is no room.
18 years ago
15cf077ef4
Put input sections with no flags in output sections with the same name.
18 years ago
8851eccaec
From Craig Silverstein: Have Parameters point to General_options.
18 years ago
f960754aee
*** empty log message ***
18 years ago
f85b5eccfe
* gdb.base/sigstep.exp (breakpoint_to_handler): Remove setup_kfail
for bug 1738.
(breakpoint_to_handler_entry): Ditto.
18 years ago
ac9d8ffe1a
daily update
18 years ago
7019cd2565
Implement -q/--emit-relocs.
18 years ago
20b4711e05
* remote.c (remote_wait, remote_async_wait): Stop if we receive
an error.
18 years ago
1843f87b0a
Add changelog entries for last commit.
18 years ago
75feb17dd5
* utils.c (debug_timestamp): New.
(vfprintf_unfiltered): Print timestamps if requested.
(show_debug_timestamp): New.
(initialize_utils): Register "set debug timestamp".
* NEWS: Mention "set debug timestamp". Add GDB 6.8 section.
* gdb.texinfo (Debugging Output): Document "set debug timestamp".
18 years ago
b40e7bf371
* gdb.base/ending-run.exp: Use the first line of code inside
function body to test breakpoints.
* gdb.mi/mi-break.exp, gdb.mi/mi2-break.exp: Adjust the actual
location where the breakpoint is inserted when using the line
where a function is declared. Fix typo in the description of
one of the tests.
* gdb.mi/mi-simplerun.exp, gdb.mi/mi2-simplerun.exp: Likewise.
18 years ago
6a048695b3
* breakpoint.c (skip_prologue_sal): New function.
(resolve_sal_pc): Adjust SAL past prologue if the SAL was
computed from a line number.
18 years ago
0b998f4963
* features/rs6000/power-core.xml, features/rs6000/power64-core.xml
features/rs6000/powerpc-601.xml, features/rs6000/rs6000.xml:
Set PC register type to "code_ptr".
* features/rs6000/powerpc-32.c, features/rs6000/powerpc-403.c,
features/rs6000/powerpc-403gc.c, features/rs6000/powerpc-505.c,
features/rs6000/powerpc-601.c, features/rs6000/powerpc-602.c,
features/rs6000/powerpc-603.c, features/rs6000/powerpc-604.c,
features/rs6000/powerpc-64.c, features/rs6000/powerpc-7400.c,
features/rs6000/powerpc-750.c, features/rs6000/powerpc-860.c,
features/rs6000/powerpc-e500.c, features/rs6000/rs6000.c:
Regenerate.
18 years ago
c8087d4c04
* ld-cris/libdso-10.d: Update expected output for the Dynamic
Section to allow an arbitrary number of spaces.
18 years ago
ad9563d653
* elf.c ( _bfd_elf_print_private_bfd_data): Call
elf_backend_get_target_dtag if defined.
* elf32-mips.c (elf_backend_get_target_dtag): Define.
* elf64-mips.c: Likewise.
* elfn32-mips.c: Likewise.
* elfxx-mips.c (_bfd_mips_elf_get_target_dtag): New.
* elfxx-mips.h (_bfd_mips_elf_get_target_dtag): Declare.
* elf-bfd.h (elf_backend_get_target_dtag): Add prototype.
* elfxx-target.h (elf_backend_get_target_dtag): Add default.
(elf_backend_data): Add elf_backend_get_target_dtag.
18 years ago
2faca73a4e
2008-02-27 Pierre Muller <muller@ics.u-strasbg.fr>
* gdb.arch/i386-sse.exp: avoid same output for two breakpoint setting
tests.
18 years ago
6f439c366a
2008-02-27 Pierre Muller <muller@ics.u-strasbg.fr>
* gdb.base/args.exp: avoid same output for tests
with single quotes.
18 years ago
1890b46591
Fix handling of ENTRY in linker script.
18 years ago
af7329f0ff
PR 3134
* h8300.h (h8_opcodes): Add an encoding for a mov.l instruction
with a 32-bit displacement but without the top bit of the 4th byte
set.
* gas/h8300/pr3134.s: New test.
* gas/h8300/pr3134.d: Expected disassembly
* gas/h8300/h8300.exp: Run the new test.
* gas/h8300/h8300-coff.exp: Fix test for COFF based ports to
accept h8300-rtemscoff not just h8300-rtems.
18 years ago
b14f9da0ae
oops - omitted from previous delta
18 years ago
20c0b65dab
* ar.c (usage): Mention -t command line switch.
* doc/binutils.texi (ranlib): Document -t command line switch.
18 years ago
ee1a7ae440
* linux-low.h (struct linux_target_ops): Replace left_pad_xfer field
by collect_ptrace_register and supply_ptrace_register hooks.
* linux-low.c (fetch_register): Use supply_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.
(usr_store_inferior_registers): Use collect_ptrace_register callback
instead of checking for the_low_target.left_pad_xfer.
* linux-s390-low.c (s390_collect_ptrace_register): New function.
(s390_supply_ptrace_register): Likewise.
(s390_fill_gregset): Call s390_collect_ptrace_register.
(the_low_target): Update.
* linux-ppc64-low.c (ppc_collect_ptrace_register): New function.
(ppc_supply_ptrace_register): Likewise.
(the_low_target): Update.
* linux-i386-low.c (the_low_target): Update.
* linux-x86-64-low.c (the_low_target): Update.
18 years ago
d61ddec435
* configure.srv [s390x-*-linux*]: Set srv_regobj to include both
reg-s390.o and reg-s390x.o.
* linux-low.c (new_inferior): New global variable.
(linux_create_inferior, linux_attach): Set it.
(linux_wait_for_process): Call the_low_target.arch_setup after the
target has stopped for the first time.
(initialize_low): Do not call the_low_target.arch_setup.
* linux-s390-low.c (s390_get_pc): Support bi-arch operation.
(s390_set_pc): Likewise.
(s390_arch_setup): New function.
(the_low_target): Use s390_arch_setup as arch_setup routine.
* regcache.c (realloc_register_cache): New function.
(set_register_cache): Call it for each existing regcache.
18 years ago
d05b4ac3aa
gdb/ChangeLog:
* regformats/regdat.sh: Rename init_registers function in
generated file to init_registers_${name}.
* regformats/reg-crisv32.dat: Set "name" to crisv32.
* regformats/reg-ppc64.dat: Set "name" to ppc64.
* regformats/reg-s390x.dat: Set "name" to s390x.
gdbserver/ChangeLog:
* server.h (init_registers): Remove prototype.
* linux-low.h (struct linux_target_ops): Add arch_setup field.
* linux-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* linux-arm-low.c (init_registers_arm): Add prototype.
(init_registers_arm_with_iwmmxt): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-cris-low.c (init_registers_cris): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-crisv32-low.c (init_registers_crisv32): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-i386-low.c (init_registers_i386_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-ia64-low.c (init_registers_ia64): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m32r-low.c (init_registers_m32r): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-m68k-low.c (init_registers_m68k): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-mips-low.c (init_registers_mips_linux): Add prototype.
(init_registers_mips64_linux): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc-low.c (init_registers_ppc): Add prototype.
(init_registers_powerpc_32, init_registers_powerpc_e500): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-ppc64-low.c (init_registers_ppc64): Add prototype.
(init_registers_powerpc_64): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-s390-low.c (init_registers_s390): Add prototype.
(init_registers_s390x): Likewise.
(the_low_target): Add initializer for arch_setup field.
* linux-sh-low.c (init_registers_sh): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-x86-64-low.c (init_registers_x86_64_linux): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* linux-xtensa-low.c (init_registers_xtensa): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* win32-low.h (struct win32_target_ops): Add arch_setup field.
* win32-low.c (initialize_low): Call the_low_target.arch_setup ()
instead of init_registers ().
* win32-arm-low.c (init_registers_arm): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* win32-i386-low.c (init_registers_i386): Add prototype.
(the_low_target): Add initializer for arch_setup field.
* spu-low.c (init_registers_spu): Add prototype.
(initialize_low): Call initialie_registers_spu () instead of
initialize_registers ().
18 years ago
a5d9d57db1
2008-02-26 Greg Law <glaw@undo-software.com>
* regcache.c (registers_changed): Call reinit_frame_cache.
18 years ago
e25c958c98
* configure.tgt (sh-*-linux*): Match sh*. Add glibc-tdep.o.
* sh-linux-tdep.c (sh_linux_init_abi): Use glibc_skip_solib_resolver
and svr4_fetch_objfile_link_map.
* Makefile.in (sh-linux-tdep.o): Update.
18 years ago
29dccb240b
*** empty log message ***
18 years ago
4bde7761b6
daily update
18 years ago
a5dc070655
From Craig Silverstein: rework handling of Script_options.
18 years ago
5daa78cc6f
* amd64-tdep.c (amd64_classify): Add support for decimal float
types.
* i386-tdep.c (i386_return_value): Make 128-bit decimal float
use the struct return convention.
18 years ago
cd72c29180
From Craig Silverstein: implement -z max-page-size and -z
common-page-size.
18 years ago
45aa233bdc
From Craig Silverstein: rename option functions for future option
handling rewrite.
18 years ago
58abc3ebf6
2008-02-26 H.J. Lu <hongjiu.lu@intel.com>
* gas/i386/jump.d: Updated for COFF.
18 years ago
b67ce46f15
* config/default.exp (gcc_gas_flag, dlltool_gas_flag): Define to
empty for testing an installed toolchain.
18 years ago
3276085244
* objdump.c (objdump_print_addr): If displaying file offsets, show
the offset even if there are no symbols available.
(dump_section): Display nothing if none of the section is going to
be dumped. Display the file offset, if requested, of the location
from where the dump starts.
* doc/binutils.texi (objdump): Mention that dumping via the -s
switch is also affected by the -F option.
18 years ago
Ian Lance Taylor
gdbadmin
Alan Modra
Markus Deuling
Tom Tromey
Daniel Jacobowitz
Pierre Muller
Ulrich Weigand
Doug Evans
Joel Brobecker
Catherine Moore
Nick Clifton
Thiago Jung Bauermann
H.J. Lu
Joseph Myers