binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Kyrylo Tkachov	83f43c8344	[arm][gas] Add support for Neoverse N1 This adds support for the Neoverse N1 CPU [1] to gas. This was previously enabled under the Ares codename, which remains as a valid option for -mcpu for compatibility reasons. make check-gas passes on arm-none-eabi. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-n1-platform-accelerating-the-transformation-to-a-scalable-cloud-to-edge-infrastructure 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-arm.c (arm_cpus): Add neoverse-n1. * doc/c-arm.texi (-mcpu): Document neoverse-n1 value.	7 years ago
Kyrylo Tkachov	516dbc4418	[AArch64][gas] Add support for Neoverse E1 This adds support for the Neoverse E1 CPU [1] to gas. make check-gas passes on aarch64-none-elf. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-e1-platform-empowering-the-infrastructure-to-meet-next-generation-throughput-demands 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add neoverse-e1. * doc/c-aarch64.texi (-mcpu): Document neoverse-e1 value.	7 years ago
Kyrylo Tkachov	38e75bf223	[AArch64][gas] Add support for Neoverse N1 This adds support for the Neoverse N1 [1] CPU to gas. This was previously enabled under the Ares codename, which remains as a valid option for -mcpu for compatibility reasons. make check-gas passes on aarch64-none-elf. [1] https://community.arm.com/processors/b/blog/posts/arm-neoverse-n1-platform-accelerating-the-transformation-to-a-scalable-cloud-to-edge-infrastructure 2019-02-21 Kyrylo Tkachov <kyrylo.tkachov@arm.com> * config/tc-aarch64.c (aarch64_cpus): Add neoverse-n1. * doc/c-aarch64.texi (-mcpu): Document neoverse-n1 value.	7 years ago
Paul Hua	6f2117ba38	Fix a potential deadlock in some older Loongson 3A1000 MIPS processors. * NEWS: Mention -m[no-]fix-loongson3-llsc. * configure.ac: Add --enable-mips-fix-loongson3-llsc. Define DEFAULT_MIPS_FIX_LOONGSON3_LLSC. * config.in: Regenerated. * configure: Likewise. * config/tc-mips.c (sync_insn, mips_fix_loongson3_llsc): New variables. (options): New OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_longopts): Add -m[no-]fix-loongson3-llsc. (md_begin): Initialize sync insn. (fix_loongson3_llsc): New. (append_insn): Call fix_loongson3_llsc. (md_parse_option): Handle OPTION_FIX_LOONGSON3_LLSC, OPTION_NO_FIX_LOONGSON3_LLSC. (md_show_usage): Display -m[no-]fix-loongson3-llsc. * doc/c-mips.texi: Document -m[no-]fix-loongson3-llsc, --enable-mips-fix-loongson3-llsc=[yes\|no].	7 years ago
H.J. Lu	db22231044	gas: Pass max_bytes to TC_FRAG_INIT ommit `3ae729d5a4` Author: H.J. Lu <hjl.tools@gmail.com> Date: Wed Mar 7 04:18:45 2018 -0800 x86: Rewrite NOP generation for fill and alignment increased MAX_MEM_FOR_RS_ALIGN_CODE to 4095 which resulted in increase of assembler time and memory usage by 5 times for inputs with many .p2align directives, which is typical for LTO output. This patch passes max_bytes to TC_FRAG_INIT so that MAX_MEM_FOR_RS_ALIGN_CODE can be set as needed and tracked by backend it so that HANDLE_ALIGN can check the maximum alignment for each rs_align_code frag. Wall time to assemble the same cc1plus.s: before: 423.78user 0.89system 7:05.71elapsed 99%CPU after: 102.35user 0.27system 1:42.89elapsed 99%CPU PR gas/24165 * frags.c (frag_var_init): Pass max_chars to TC_FRAG_INIT as max_bytes. * config/tc-aarch64.h (TC_FRAG_INIT): Add and pass max_bytes to aarch64_init_frag. * /config/tc-arm.h (TC_FRAG_INIT): And and pass max_bytes to arm_init_frag. * config/tc-avr.h (TC_FRAG_INIT): And and ignore max_bytes. * config/tc-ia64.h (TC_FRAG_INIT): Likewise. * config/tc-mmix.h (TC_FRAG_INIT): Likewise. * config/tc-nds32.h (TC_FRAG_INIT): Likewise. * config/tc-ns32k.h (TC_FRAG_INIT): Likewise. * config/tc-rl78.h (TC_FRAG_INIT): Likewise. * config/tc-rx.h (TC_FRAG_INIT): Likewise. * config/tc-score.h (TC_FRAG_INIT): Likewise. * config/tc-tic54x.h (TC_FRAG_INIT): Likewise. * config/tc-tic6x.h (TC_FRAG_INIT): Likewise. * config/tc-xtensa.h (TC_FRAG_INIT): Likewise. * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Set to (alignment ? ((1 << alignment) - 1) : 1) (i386_tc_frag_data): Add max_bytes. (TC_FRAG_INIT): Add and track max_bytes. (HANDLE_ALIGN): Replace MAX_MEM_FOR_RS_ALIGN_CODE with fragP->tc_frag_data.max_bytes. * doc/internals.texi: Update TC_FRAG_TYPE with max_bytes.	7 years ago
Jim Wilson	21820ebe58	Add missing ChangeLog files for previous patch.	7 years ago
Tamar Christina	f7dd2fb2e2	Arm: Backport hlt to all architectures. The software trap instruction HLT that was introduced in Armv8-a is used as the semihosting trap instruction in AArch64. In order to allow systems configured to run AArch64 code to also run AArch32 with semihosting it was decided that AArch32 should also use HLT in the case of the "mixed mode" environment. This requires that HLT also be backported to all earlier architectures. The instruction is in the undefined encoding space earlier architectures but must trigger a semihosting trap [3]. The Arm Architectural Reference Manual [1] doesn't explicitly mention this however this is an explicit requirement in the Semihosting-v2 protocol [2]. [1] https://developer.arm.com/docs/ddi0487/latest/arm-architecture-reference-manual-armv8-for-armv8-a-architecture-profile [2] https://developer.arm.com/docs/100863/latest/the-semihosting-interface [3] `19a6e31c9d` gas/ChangeLog: * config/tc-arm.c (insns): Redefine THUMB_VARIANT and ARM_VARIANT for hlt to armv1. * testsuite/gas/arm/armv8a-automatic-hlt.d: Update TAGs * testsuite/gas/arm/hlt.d: New test. * testsuite/gas/arm/hlt.s: New test. opcodes/ChangeLog: * arm-dis.c (arm_opcodes): Redefine hlt to armv1.	7 years ago
Tamar Christina	bd756351a6	AArch64: Add negative tests for Armv8.3-a complex number instructions instructions. This patch just adds a few negative tests for the Armv8.3-a complex instructions. These already do the right disassembly without needing a verifier, but adding some tests to make sure that stays that way. gas/ChangeLog: * testsuite/gas/aarch64/undefined_advsimd_armv8_3.d: New test. * testsuite/gas/aarch64/undefined_advsimd_armv8_3.s: New test.	7 years ago
Tamar Christina	6456d318aa	AArch64: Add verifier for By elem Single and Double sized instructions. The AArch64 instruction set has cut-outs inside instructions encodings for when a given encoding that would normally fall within the encoding space of an instruction is instead undefined. This updates the first few instructions FMLA, FMLA, FMUL and FMULX in the case where sz:L == 11. gas/ChangeLog: PR binutils/23212 * testsuite/gas/aarch64/undefined_by_elem_sz_l.s: New test. * testsuite/gas/aarch64/undefined_by_elem_sz_l.d: New test. opcodes/ChangeLog: PR binutils/23212 * aarch64-opc.h (enum aarch64_field_kind): Add FLD_sz. * aarch64-opc.c (verify_elem_sd): New. (fields): Add FLD_sz entr. * aarch64-tbl.h (_SIMD_INSN): New. (aarch64_opcode_table): Add elem_sd verifier to fmla, fmls, fmul and fmulx scalar and vector by element isns.	7 years ago
Eric Botcazou	0e7e9601be	Visium: align branch absolute instruction for the GR6 This is done in order to avoid a pipeline hazard on the GR6. gas/ * config/tc-visium.c (md_assemble) <mode_cad>: Align instruction on 64-bit boundaries for the GR6. * testsuite/gas/visium/allinsn_gr6.s: Tweak. * testsuite/gas/visium/allinsn_gr6.d: Likewise. * testsuite/gas/visium/bra-1.d: New test. * testsuite/gas/visium/bra-1.s: Likewise. * testsuite/gas/visium/visium.exp: Run bra-1 test.	7 years ago
John Darrington	c6f14c0d2c	S12Z: GAS: Allow #_symbol operands as mov source mov.l, mov.p and mov.w (but not mov.b) when called with an immediate source operand should be accepted a relocatable expression. This change makes that possible. gas/ * config/tc-s12z.c (lex_imm): Add new argument exp_o. (emit_reloc): New function. (md_apply_fix): [BFD_RELOC_S12Z_OPR] Recognise that it can be either 2 bytes or 3 bytes long. * testsuite/gas/s12z/mov-imm-reloc.d: New file. * testsuite/gas/s12z/mov-imm-reloc.s: New file. * testsuite/gas/s12z/s12z.exp: Add them.	7 years ago
John Darrington	91bae99160	S12Z: GAS: Fix incorrect range test for 16-bit PC relative offsets. The limits for PC relative offsets were incorrect. This change fixes them and adds some tests. gas/ * config/tc-s12z.c (md_apply_fix): Fix incorrect limits. * testsuite/gas/s12z/pc-rel-bad.d: New file. * testsuite/gas/s12z/pc-rel-bad.l: New file. * testsuite/gas/s12z/pc-rel-bad.s: New file. * testsuite/gas/s12z/pc-rel-good.d: New file. * testsuite/gas/s12z/pc-rel-good.s: New file. * testsuite/gas/s12z/s12z.exp: Add them.	7 years ago
John Darrington	1d4d86699f	S12Z: GAS: Issue warning if TFR/EXG have identical source and destination. It is permissible for the source and destination operands of TFR and EXG to be the same register. However it is a pointless instruction and anyone writing it has probably made a mistake. This change emits a warning if such an instruction is encountered. gas/ * config/tc-s12z.c (tfr): Emit warning if operands are the same. * testsuite/gas/s12z/exg.d: New test case. * testsuite/gas/s12z/exg.l: New file.	7 years ago
John Darrington	8b3a46f93c	S12Z: GAS: Disallow immediate destination operands The assembler permitted instructions which attempted to assign to an immediate operand. Bizarrely there is a valid machine code for such operations (although the documentation says it's "inappropriate"). This change causes such attempts to fail with an error message. gas/ * config/tc-s12z.c (lex_opr): Add a parameter to indicate whether immediate mode operands should be permitted. * testsuite/s12z/imm-dest.d: New file. * testsuite/s12z/imm-dest.l: New file. * testsuite/s12z/imm-dest.s: New file. * testsuite/s12z/s12z.exp: Add them.	7 years ago
Andreas Krebbel	fc60b8c806	S/390: Implement instruction set extensions opcodes/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * s390-mkopc.c (main): Accept arch13 as cpu string. * s390-opc.c: Add new instruction formats and instruction opcode masks. * s390-opc.txt: Add new arch13 instructions. include/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * opcode/s390.h (enum s390_opcode_cpu_val): Add S390_OPCODE_ARCH13. gas/ChangeLog: 2019-01-31 Andreas Krebbel <krebbel@linux.ibm.com> * config/tc-s390.c (s390_parse_cpu): New entry for arch13. * doc/c-s390.texi: Document arch13 march option. * testsuite/gas/s390/s390.exp: Run the arch13 related tests. * testsuite/gas/s390/zarch-arch13.d: New test. * testsuite/gas/s390/zarch-arch13.s: New test. * testsuite/gas/s390/zarch-z13.d: Expect the renamed mnemonics also for z13.	7 years ago
Alan Modra	3ca4a8eca7	Assorted warning fixes gcc-9 flagged warnings at the places I'm patching here, all real bugs. * config/tc-alpha.c (md_apply_fix): Correct range checks for BFD_RELOC_ALPHA_NOP, BFD_RELOC_ALPHA_LDA, BFD_RELOC_ALPHA_BSR. * config/tc-arm.c (md_apply_fix): Use llabs rather than abs. * config/tc-csky.c (get_macro_reg_vals): Pass s to csky_show_error.	7 years ago
Max Filippov	75c1c97184	xtensa: gas: don't keep relocations for constants xtensa gas chokes on 8/16 bit data entries representing constant symbols because it leaves BFD_RELOC_8/BFD_RELOC_16 fixups for which xtensa BFD cannot emit relocations. Resolve fixups for constant symbols in md_apply_fix. gas/ 2019-01-28 Max Filippov <jcmvbkbc@gmail.com> * config/tc-xtensa.c (md_apply_fix): Mark fixups for constant symbols as done in md_apply_fix. * testsuite/gas/all/forward.d: Don't XFAIL for xtensa.	7 years ago
Nick Clifton	2d151af719	Updated Russian and French translations for the gas sub-directory	7 years ago
Alan Modra	e044973b0c	Control gas enable-checking default by bfd/development.sh * configure.ac (ac_checking): Set from bfd/development.sh development variable. * configure: Regenerate.	7 years ago
Tamar Christina	e10620d3b9	AArch64: Add missing changelog for Update encodings for stg, st2g, stzg and st2zg	7 years ago
Sudi Das	20a4ca5524	AArch64: Add new STZGM instruction for Armv8.5-A Memory Tagging Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch adds the new STZGM instruction. STGZM Xt, [<Xn\|SP>] Committed on behalf of Sudakshina Das. * gas/ChangeLog * * testsuite/gas/aarch64/armv8_5-a-memtag.d: New tests for stzgm. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * opcodes/ChangeLog * * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. * aarch64-tbl.h (aarch64_opcode): Add new stzgm.	7 years ago
Sudi Das	550fd7bf68	AArch64: Remove ldgv and stgv instructions from Armv8.5-A Memory Tagging Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV instructions. These instructions needed special infrastructure to support [base]! style for addressing mode. That is also removed now. Committed on behalf of Sudakshina Das. * gas/ChangeLog * * config/tc-aarch64.c (parse_address_main): Remove support for [base]! address expression. (parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2. (warn_unpredictable_ldst): Remove support for ldstgv_indexed. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * include/ChangeLog * * opcode/aarch64.h (enum aarch64_opnd): Remove AARCH64_OPND_ADDR_SIMPLE_2. (enum aarch64_insn_class): Remove ldstgv_indexed. * opcodes/ChangeLog * * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. * aarch64-asm.h (ins_addr_simple_2): Likeiwse. * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. * aarch64-dis.h (ext_addr_simple_2): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Remove case for ldstgv_indexed. (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.	7 years ago
Wu Heng	10c172ba93	PR23940, check bounds before using PR gas/23940 * macro.c (getstring): Check array bound before accessing.	7 years ago
Alan Modra	0c56b5cfb6	PR24125, Assertion failure with embedded NULs in string An assertion that can be triggered by user input is wrong, so remove it. I believe the NUL would have been accepted before the PR20902 patch. PR 20902 PR 24125 * read.c (stringer): Delete assertion.	7 years ago
Nick Clifton	375cd4233d	Updated translations for various binutils subdirectories.	7 years ago
Nick Clifton	f48dfe417e	Change version to 2.32.51 and regenerate configure and pot files.	7 years ago
Nick Clifton	f974f26cb1	Add markers for 2.32 branch to NEWS and ChangeLog files.	7 years ago
Tamar Christina	dee3ee2224	Arm: Clean up PE GAS testsuite correct THUMB tests. The PE targets don't support mapping symbols and so the disassembler is unable to correctly output thumb instructions when the input was thumb. So for testcases that only have thumb output, I have copied them and skipped the ones for which auto-detection is supposed to work on PE, and added a new one that will force thumb output. This so that the tests still check the mapping symbols. For the tests that switch between thumb and arm in one file I just skip them entirely on PE targets. This cleans up the PE GAS testsuite. gas/ * testsuite/gas/arm/archv6t2-1-pe.d: New test. * testsuite/gas/arm/archv6t2-1.d: Skip pe. * testsuite/gas/arm/csdb.d: Skip pe. * testsuite/gas/arm/sb-thumb1-pe.d: New test. * testsuite/gas/arm/sb-thumb1.d: Skip pe. * testsuite/gas/arm/sb-thumb2-pe.d: New test. * testsuite/gas/arm/sb-thumb2.d: Skip pe. * testsuite/gas/arm/udf.d: Skip pe.	7 years ago
Jim Wilson	a4bf3d0720	Don't emit vendor attribute section if there is no attribute to emit. 2019-01-16 Kito Cheng <kito@andestech.com> bfd/ * elf-attrs.c (vendor_obj_attr_size): Return 0 if size is 0 even for OBJ_ATTR_PROC. gas/ * testsuite/gas/riscv/attribute-empty.d: New.	7 years ago
Jim Wilson	2dc8dd17cd	RISC-V: Support ELF attribute for gas and readelf. 2019-01-16 Kito Cheng <kito@andestech.com> Nelson Chu <nelson@andestech.com> bfd/ * elfnn-riscv.c (riscv_elf_obj_attrs_arg_type): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section_type): Likewise. (elf_backend_obj_attrs_section): Likewise. (elf_backend_obj_attrs_arg_type): Define as riscv_elf_obj_attrs_arg_type. * elfxx-riscv.c (riscv_estimate_digit): New. (riscv_estimate_arch_strlen1): Likewise. (riscv_estimate_arch_strlen): Likewise. (riscv_arch_str1): Likewise. (riscv_arch_str): Likewise. * elfxx-riscv.h (riscv_arch_str): Declare. binutils/ * readelf.c (get_riscv_section_type_name): New function. (get_section_type_name): Add handler for RISC-V. (riscv_attr_tag_t): Declare. (riscv_attr_tag): New. (display_riscv_attribute): New function. (process_attributes): Add handler for RISC-V. * testsuite/binutils-all/strip-3.d: Remove .riscv.attribute section. gas/ * config/tc-riscv.c (DEFAULT_RISCV_ATTR): Define to 0 if not defined. (riscv_set_options): Add `arch_attr` field. (riscv_opts): Set default value for arch_attr. (riscv_write_out_arch_attr): New. (riscv_set_public_attributes): Likewise. (riscv_md_end): Likewise. (riscv_convert_symbolic_attribute): Likewise. (s_riscv_attribute): Likewise. (explicit_arch_attr): Likewise. (riscv_pseudo_table): Add .attribute to the table. (options): Add OPTION_ARCH_ATTR and OPTION_NO_ARCH_ATTR enumeration constants. (md_longopts): Add `march-attr' and `mno-arch-attr' options. (md_parse_option): Handle the new options. (md_show_usage): Document the `march-attr' option. * config/tc-riscv.h (md_end): Define as riscv_md_end (riscv_md_end): Declare. (CONVERT_SYMBOLIC_ATTRIBUTE): Define as riscv_convert_symbolic_attribute. (riscv_convert_symbolic_attribute): Declare. (start_assemble): Declare. * testsuite/gas/elf/elf.exp: Adjust test case for section2.e. * testsuite/gas/elf/section2.e-riscv: New. * testsuite/gas/riscv/attribute-01.d: New test * testsuite/gas/riscv/attribute-02.d: Likewise. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/attribute-04.d: Likewise. * testsuite/gas/riscv/attribute-04.s: Likewise. * testsuite/gas/riscv/attribute-05.d: Likewise. * testsuite/gas/riscv/attribute-05.s: Likewise. * testsuite/gas/riscv/attribute-06.d: Likewise. * testsuite/gas/riscv/attribute-06.s: Likewise. * testsuite/gas/riscv/attribute-07.d: Likewise. * testsuite/gas/riscv/attribute-07.s: Likewise. * testsuite/gas/riscv/attribute-08.d: Likewise. * testsuite/gas/riscv/attribute-08.s: Likewise. * testsuite/gas/riscv/attribute-unknown.d: Likewise. * testsuite/gas/riscv/attribute-unknown.s: Likewise. * testsuite/gas/riscv/empty.l: Likewise. * doc/c-riscv.texi (.attribute): Add documentation. * configure.ac (--enable-default-riscv-attribute): New options. * configure: Re-generate. * config.in: Re-generate. include/ * elf/riscv.h (SHT_RISCV_ATTRIBUTES): Define. (Tag_RISCV_arch): Likewise. (Tag_RISCV_priv_spec): Likewise. (Tag_RISCV_priv_spec_minor): Likewise. (Tag_RISCV_priv_spec_revision): Likewise. (Tag_RISCV_unaligned_access): Likewise. (Tag_RISCV_stack_align): Likewise.	7 years ago
John Darrington	e7b47f2e68	S12Z: gas: Fix bug when a symbol name was the single letter 'c'. The assembler incorrectly recognised "c" as a register name, and refused to allow it where it expected a symbol/label. gas/ * config/tc-s12z.c (lex_reg_name): Compare the length of the strings before the contents. * testsuite/gas/s12z/labels.d: New file. * testsuite/gas/s12z/labels.s: New file. * testsuite/gas/s12z/s12z.exp: Add them.	7 years ago
John Darrington	77fdb0e00b	S12Z: gas: Permit "extend" instructions which don't actually extend. Other assemblers permit "extending" a register into a register of a smaller size or the same size. It doesn't make much sense to do this but would appear to be a valid instruction. So change the error to a warning. gas/ * config/tc-s12z.c (tfr): Change as_bad to as_warn. Also fix message typo and semantics.	7 years ago
John Darrington	d5dcaf1b59	S12Z: Emit RELOC_S12Z_OPR instead of RELOC_EXT24 where appropriate. When assembling instructions which involve OPR references, emit RELOC_S12Z_OPR instead of RELOC_EXT24. bfd/ * bfd-in2.h [BFD_RELOC_S12Z_OPR]: New reloc. * libbfd.h: regen. * elf32-s12z.c (eld_s12z_howto_table): R_S12Z_OPR takes non zero source field. (md_apply_fix): Apply final fix to BFD_RELOC_S12Z_OPR. * reloc.c[BFD_RELOC_S12Z_OPR]: New reloc. gas/ * config/tc-s12z.c (emit_opr): Emit BFD_RELOC_S12Z_OPR instead of BFD_RELOC_24. * testsuite/gas/s12z/opr-indirect-expr.d: Expect R_S12Z_OPR instead of R_S12Z_EXT24.	7 years ago
Srinath Parvathaneni	55e8aae79a	Implement the assembly instructions yield, wfe, wfi and sev for ARMv6T2 in both ARM mode and Thumb mode. * config/tc-arm.c (arm_ext_v6k_v6t2): Define. (insns) [ARM_VARIANT]: Modified. (insns) [THUMB_VARIANT]: To implement few ARMv6K instructions in ARMv6T2 as well. * testsuite/gas/arm/archv6t2-1.d: New test. * testsuite/gas/arm/archv6t2-1.s: Likewise. * testsuite/gas/arm/archv6t2-2.d: Likewise.	7 years ago
Alan Modra	c7af41ec2c	More fallout from PR 23963 change PR 23963 * testsuite/gas/m68hc11/lbranch-dwarf2.d: Adjust for PR23963 change. * testsuite/gas/m68hc11/opers12-dwarf2.d: Likewise.	7 years ago
Nick Clifton	59aa9b0be1	Correct changelog entry.	7 years ago
Nick Clifton	12add40ee4	Stop objdump from displaying control codes embedded in symbol names. PR 23963 binutils* objdump.c (sanitize_string): New function. Removes control characters from symbol names. (dump_section_header): Use new function. (objdump_print_symname): Likewise. (objdump_print_addr_with_sym): Likewise. (show_line): Likewise. (disassemble_bytes): Likewise. (disassemble_section): Likewise. (load_specific_debug_section): Likewise. (read_section_stabs): Likewise. (print_section_stabs): Likewise. (dump_section): Likewise. (dump_reloc_set): Likewise. (dump_relocs_in_section): Likewise. (dump_bfd): Likewise. (display_any_bfd): Likewise. gas * testsuite/gas/mips/mips16-branch-absolute-1.d: Adjust for the fact that control characters are now displayed as escape sequences. * testsuite/gas/mips/mips16-e.d: Likewise. * testsuite/gas/mips/mips16-pcrel-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-delay-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-delay-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n32-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n32-1.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n64-sym32-0.d: Likewise. * testsuite/gas/mips/mips16-pcrel-n64-sym32-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-delay-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-delay-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n32-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n32-1.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-0.d: Likewise. * testsuite/gas/mips/mips16e2@mips16-pcrel-n64-sym32-1.d: Likewise. * testsuite/gas/mips/mipsel16-e.d: Likewise. * testsuite/gas/mips/mipsr6@msa.d: Likewise. * testsuite/gas/mips/mipsr6@relax-swap3.d: Likewise. * testsuite/gas/mips/r6-64-n32.d: Likewise. * testsuite/gas/mips/r6-64-n64.d: Likewise. * testsuite/gas/mips/r6-n32.d: Likewise. * testsuite/gas/mips/r6-n64.d: Likewise. * testsuite/gas/mips/r6.d: Likewise. * testsuite/gas/mips/tmips16-e.d: Likewise. * testsuite/gas/mips/tmipsel16-e.d: Likewise. * testsuite/gas/mn10300/relax.d: Likewise.	7 years ago
John Darrington	39f286cd58	S12Z: Fix disassembly of indexed OPR operands with zero index. gas/ * testsuite/gas/s12z/jsr.s: New case. * testsuite/gas/s12z/jsr.d: New case. opcodes/ * s12z-dis.c (opr_emit_disassembly): Do not omit an index if it is zero.	7 years ago
Andrew Paprocki	3107326d3d	Adjust bfd/warning.m4 egrep patterns Adjust the `bfd/warning.m4` `egrep` patterns to handle preprocessors that do not define `__GNUC__`, leaving the string in the output. bfd/ * warning.m4: Adjust egrep pattern for non-GNU compilers. * configure: Regenerate. binutils/ * configure: Regenerate. gas/ * configure: Regenerate. gold/ * configure: Regenerate. gprof/ * configure: Regenerate. ld/ * configure: Regenerate. opcodes/ * configure: Regenerate.	7 years ago
Kyrylo Tkachov	c8fcc36012	[AArch64][gas] Add -mcpu support for Arm Ares This adds support for the Arm Ares CPU for AArch64. It implements the Armv8.2-A architecture with the optional features of statistical profiling, dot product and FP16 on by default. Note: Ares is a codename to enable early adopters and in time we will add the final product name once it's announced. * config/tc-aarch64.c (aarch64_cpus): Add ares. * doc/c-aarch64.texi (-mcpu): Document ares value.	7 years ago
Alan Modra	171b8e1957	run_dump_test source in build directory Some existing tests build .s and .d files for run_dump_test, using an absolute #source: line in the .d file. This patch changes that scheme a little to instead use "#source: ./..." in .d files rather than "#source: $objdir/...", which is more useful in cases where the .d file is not generated. This allows RX gas test files to be built in the build directory, rather than in a source directory (which might be read-only). binutils/ * testsuite/lib/binutils-common.exp (run_dump_test): Don't prepend $srcdir/$subdir to source file name if it starts with "./". gas/ * testsuite/gas/rx/rx.exp: Create generated test source in current directory. * testsuite/gas/rx/Xtod.d, * testsuite/gas/rx/abs.d, * testsuite/gas/rx/adc.d, * testsuite/gas/rx/add.d, * testsuite/gas/rx/and.d, * testsuite/gas/rx/bclr.d, * testsuite/gas/rx/bcnd.d, * testsuite/gas/rx/bfmov.d, * testsuite/gas/rx/bmcnd.d, * testsuite/gas/rx/bnot.d, * testsuite/gas/rx/bra.d, * testsuite/gas/rx/brk.d, * testsuite/gas/rx/bset.d, * testsuite/gas/rx/bsr.d, * testsuite/gas/rx/btst.d, * testsuite/gas/rx/clrpsw.d, * testsuite/gas/rx/cmp.d, * testsuite/gas/rx/dabs.d, * testsuite/gas/rx/dadd.d, * testsuite/gas/rx/dbt.d, * testsuite/gas/rx/dcmp.d, * testsuite/gas/rx/ddiv.d, * testsuite/gas/rx/div.d, * testsuite/gas/rx/divu.d, * testsuite/gas/rx/dmov.d, * testsuite/gas/rx/dmul.d, * testsuite/gas/rx/dneg.d, * testsuite/gas/rx/dpopm.d, * testsuite/gas/rx/dpushm.d, * testsuite/gas/rx/dround.d, * testsuite/gas/rx/dsqrt.d, * testsuite/gas/rx/dsub.d, * testsuite/gas/rx/dtoX.d, * testsuite/gas/rx/emaca.d, * testsuite/gas/rx/emsba.d, * testsuite/gas/rx/emul.d, * testsuite/gas/rx/emula.d, * testsuite/gas/rx/emulu.d, * testsuite/gas/rx/fadd.d, * testsuite/gas/rx/fcmp.d, * testsuite/gas/rx/fdiv.d, * testsuite/gas/rx/fmul.d, * testsuite/gas/rx/fsqrt.d, * testsuite/gas/rx/fsub.d, * testsuite/gas/rx/ftoi.d, * testsuite/gas/rx/ftou.d, * testsuite/gas/rx/gprel.d, * testsuite/gas/rx/int.d, * testsuite/gas/rx/itof.d, * testsuite/gas/rx/jmp.d, * testsuite/gas/rx/jsr.d, * testsuite/gas/rx/machi.d, * testsuite/gas/rx/maclh.d, * testsuite/gas/rx/maclo.d, * testsuite/gas/rx/max.d, * testsuite/gas/rx/min.d, * testsuite/gas/rx/mov.d, * testsuite/gas/rx/movco.d, * testsuite/gas/rx/movli.d, * testsuite/gas/rx/movu.d, * testsuite/gas/rx/msbhi.d, * testsuite/gas/rx/msblh.d, * testsuite/gas/rx/msblo.d, * testsuite/gas/rx/mul.d, * testsuite/gas/rx/mulhi.d, * testsuite/gas/rx/mullh.d, * testsuite/gas/rx/mullo.d, * testsuite/gas/rx/mvfacgu.d, * testsuite/gas/rx/mvfachi.d, * testsuite/gas/rx/mvfaclo.d, * testsuite/gas/rx/mvfacmi.d, * testsuite/gas/rx/mvfc.d, * testsuite/gas/rx/mvfcp.d, * testsuite/gas/rx/mvfdc.d, * testsuite/gas/rx/mvfdr.d, * testsuite/gas/rx/mvtacgu.d, * testsuite/gas/rx/mvtachi.d, * testsuite/gas/rx/mvtaclo.d, * testsuite/gas/rx/mvtc.d, * testsuite/gas/rx/mvtcp.d, * testsuite/gas/rx/mvtdc.d, * testsuite/gas/rx/neg.d, * testsuite/gas/rx/nop.d, * testsuite/gas/rx/not.d, * testsuite/gas/rx/opecp.d, * testsuite/gas/rx/or.d, * testsuite/gas/rx/pop.d, * testsuite/gas/rx/popc.d, * testsuite/gas/rx/popm.d, * testsuite/gas/rx/push.d, * testsuite/gas/rx/pushc.d, * testsuite/gas/rx/pushm.d, * testsuite/gas/rx/r-bcc.d, * testsuite/gas/rx/r-bra.d, * testsuite/gas/rx/racl.d, * testsuite/gas/rx/racw.d, * testsuite/gas/rx/rdacl.d, * testsuite/gas/rx/rdacw.d, * testsuite/gas/rx/revl.d, * testsuite/gas/rx/revw.d, * testsuite/gas/rx/rmpa.d, * testsuite/gas/rx/rolc.d, * testsuite/gas/rx/rorc.d, * testsuite/gas/rx/rotl.d, * testsuite/gas/rx/rotr.d, * testsuite/gas/rx/round.d, * testsuite/gas/rx/rstr.d, * testsuite/gas/rx/rte.d, * testsuite/gas/rx/rtfi.d, * testsuite/gas/rx/rts.d, * testsuite/gas/rx/rtsd.d, * testsuite/gas/rx/sat.d, * testsuite/gas/rx/satr.d, * testsuite/gas/rx/save.d, * testsuite/gas/rx/sbb.d, * testsuite/gas/rx/sccnd.d, * testsuite/gas/rx/scmpu.d, * testsuite/gas/rx/setpsw.d, * testsuite/gas/rx/shar.d, * testsuite/gas/rx/shll.d, * testsuite/gas/rx/shlr.d, * testsuite/gas/rx/smovb.d, * testsuite/gas/rx/smovf.d, * testsuite/gas/rx/smovu.d, * testsuite/gas/rx/sstr.d, * testsuite/gas/rx/stnz.d, * testsuite/gas/rx/stz.d, * testsuite/gas/rx/sub.d, * testsuite/gas/rx/suntil.d, * testsuite/gas/rx/swhile.d, * testsuite/gas/rx/tst.d, * testsuite/gas/rx/utof.d, * testsuite/gas/rx/wait.d, * testsuite/gas/rx/xchg.d, * testsuite/gas/rx/xor.d: Add #source line. ld/ * testsuite/ld-elf/sec64k.exp: Use . rather than $objdir in generated source file names. * testsuite/ld-m68k/m68k-got.exp: Likewise.	7 years ago
Kyrylo Tkachov	ef8df4caec	[arm][gas] Add -mcpu support for Arm Ares This adds support for the Arm Ares CPU in the arm port. It implements the Armv8.2-A architecture with the relevant optional features of dot product and FP16 on by default. Note: Ares is a codename to enable early adopters and in time we will add the final product name once it's announced. * config/tc-arm.c (arm_cpus): Add ares. * doc/c-arm.texi (-mcpu): Document ares value.	7 years ago
Yoshinori Sato	6a25bee8d0	RX: gas - Add RXv3 instruction support. Instruction manual. https://www.renesas.com/us/en/doc/products/mpumcu/doc/rx_family/r01us0316ej0100-rxv3sm.pdf * config/rx-defs.h (rx_cpu_types): Add type RXV3 and RXV3FPU. (rx_bfield): Add prototype. (rx_post): Likewise. * config/rx-parse.y: Add v3 instructions and Double FPU registers. (DSIZE): Define. (POST): Define. (rx_check_v3): New. check v3 type. (rx_check_dfpu): New. check have double support. (double_condition_table): New. dcmp<cond> contiditon. (check_condition): Multiple condition support. (rx_lex): RXv3 instructions support. Add parse dcmp<cond> instruction and Double FPU registers. (immediate): Disable optimize in dmov #imm case. (displacement): Add double displacement in dmov instraction. * config/tc-rx.c (rx_use_conventional_section_names): Invert default value in rx--linux target. (cpu_type): Add additional ELF flags. (cpu_type_list): Add RXv3. (md_parse_option): Refer elf_flags from cpu_type_list. (md_show_usage): Add rxv3 and rxv3-dfpu. (rx_bytesT): Add post byte. (rx_bfield): New. generate bfmov / bfmovz "imm" field. (rx_post): New. Set instruction post byte. (md_assemble): Add post byte. doc/c-rx.texi: Add cpu types. testsuite/gas/rx/Xtod.d: New. * testsuite/gas/rx/Xtod.sm: New. * testsuite/gas/rx/bfmov.d: New. * testsuite/gas/rx/bfmov.sm: New. * testsuite/gas/rx/dabs.d: New. * testsuite/gas/rx/dabs.sm: New. * testsuite/gas/rx/dadd.d: New. * testsuite/gas/rx/dadd.sm: New. * testsuite/gas/rx/dcmp.d: New. * testsuite/gas/rx/dcmp.sm: New. * testsuite/gas/rx/ddiv.d: New. * testsuite/gas/rx/ddiv.sm: New. * testsuite/gas/rx/dmov.d: New. * testsuite/gas/rx/dmov.sm: New. * testsuite/gas/rx/dmul.d: New. * testsuite/gas/rx/dmul.sm: New. * testsuite/gas/rx/dneg.d: New. * testsuite/gas/rx/dneg.sm: New. * testsuite/gas/rx/dpopm.d: New. * testsuite/gas/rx/dpopm.sm: New. * testsuite/gas/rx/dpushm.d: New. * testsuite/gas/rx/dpushm.sm: New. * testsuite/gas/rx/dround.d: New. * testsuite/gas/rx/dround.sm: New. * testsuite/gas/rx/dsqrt.d: New. * testsuite/gas/rx/dsqrt.sm: New. * testsuite/gas/rx/dsub.d: New. * testsuite/gas/rx/dsub.sm: New. * testsuite/gas/rx/dtoX.d: New. * testsuite/gas/rx/dtoX.sm: New. * testsuite/gas/rx/macros.inc: Add double FPU registers. * testsuite/gas/rx/mvfdc.d: New. * testsuite/gas/rx/mvfdc.sm: New. * testsuite/gas/rx/mvfdr.d: New. * testsuite/gas/rx/mvfdr.sm: New. * testsuite/gas/rx/mvtdc.d: New. * testsuite/gas/rx/mvtdc.sm: New. * testsuite/gas/rx/rstr.d: New. * testsuite/gas/rx/rstr.sm: New. * testsuite/gas/rx/rx.exp: Use rxv3-dfpu option. * testsuite/gas/rx/save.d: New. * testsuite/gas/rx/save.sm: New. * testsuite/gas/rx/xor.d: New. * testsuite/gas/rx/xor.sm: Add pattern.	7 years ago
Wu Heng	1b2ed39c3a	Fix potential buffer overrun whilst scanning macro strings. PR 24010 * macro.c (get_any_string): Check for end of input whilst scanning for separators.	7 years ago
Wu Heng	bdfb445597	Fix bug parsing angle bracketed string sequences. PR 24009 * read.c (stringer): Fix handling of missing '>' character at end of <...> sequence.	7 years ago
Alan Modra	827041555a	Update year range in copyright notice of binutils files	7 years ago
Alan Modra	d5c04e1bf8	ChangeLog rotation	7 years ago
H.J. Lu	b9519cfe98	x86: Properly handle PLT expression in directive For PLT expressions, we should subtract the PLT relocation size only for jump instructions. Since PLT relocations are PC relative, we only allow "symbol@PLT" in PLT expression. gas/ PR gas/23997 * config/tc-i386.c (x86_cons): Check for invalid PLT expression. (md_apply_fix): Subtract the PLT relocation size only for jump instructions. * testsuite/gas/i386/reloc32.s: Add test for invalid PLT expression. * testsuite/gas/i386/reloc64.s: Likewise. * testsuite/gas/i386/ilp32/reloc64.s: Likewise. * testsuite/gas/i386/reloc32.l: Updated. * testsuite/gas/i386/reloc64.l: Likewise. * testsuite/gas/i386/ilp32/reloc64.l: Likewise. ld/ PR gas/23997 * testsuite/ld-i386/i386.exp: Run PR gas/23997 test. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/pr23997a.s: New file. * testsuite/ld-x86-64/pr23997b.c: Likewise. * testsuite/ld-x86-64/pr23997c.c: Likewise.	7 years ago
H.J. Lu	0a59decbb8	elf: Add PT_GNU_PROPERTY segment type Linkers group input note sections with the same name into one output note section with the same name. One output note section is placed in one PT_NOTE segment. New linkers merge all input .note.gnu.property sections into one output .note.gnu.property section with a single NT_GNU_PROPERTY_TYPE_0 note in a single PT_NOTE segment. Since older linkers treat input .note.gnu.property section as a generic note section and just concatenate all input .note.gnu.property sections into one output .note.gnu.property section without merging them, we may see one or more NT_GNU_PROPERTY_TYPE_0 notes in PT_NOTE segment, which are invalid. GNU_PROPERTY_X86_UINT32_VALID was defined to address this issue such that linker sets the bit for non-relocatable outputs. But it isn't sufficient: 1. It doesn't cover generic properties. 2. When -mx86-used-note=yes is passed to x86 assembler, the GNU_PROPERTY_X86_UINT32_VALID bit is set in GNU_PROPERTY_X86_ISA_1_USED property in object file and older linkers generate invalid NT_GNU_PROPERTY_TYPE_0 notes with the GNU_PROPERTY_X86_UINT32_VALID bit set. I am proposing the following changes: 1. Add PT_GNU_PROPERTY segment type: # define PT_GNU_PROPERTY (PT_LOOS + 0x474e553) which covers .note.gnu.property section. 2. Remove GNU_PROPERTY_X86_UINT32_VALID. bfd/ PR ld/23900 * elf.c (get_program_header_size): Add a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. (_bfd_elf_map_sections_to_segments): Create a PT_GNU_PROPERTY segment for NOTE_GNU_PROPERTY_SECTION_NAME. * elfxx-x86.c (_bfd_elf_link_setup_gnu_properties): Don't set GNU_PROPERTY_X86_UINT32_VALID. binutils/ PR ld/23900 * readelf.c (get_segment_type): Support PT_GNU_PROPERTY. (decode_x86_isa): Don't check GNU_PROPERTY_X86_UINT32_VALID. (decode_x86_feature_1): Likewise. (decode_x86_feature_2): Likewise. (print_gnu_property_note): Remove GNU_PROPERTY_X86_UINT32_VALID check. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/i386/pr21231b.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0x7fffffff. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. gas/ PR ld/23900 * config/tc-i386.c (x86_cleanup): Don't set GNU_PROPERTY_X86_UINT32_VALID. * testsuite/gas/i386/property-1.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. include/ PR ld/23900 * elf/common.h (PT_GNU_PROPERTY): New. (GNU_PROPERTY_X86_UINT32_VALID): Removed. ld/ PR ld/23900 * testsuite/ld-elf/elf.exp: Run PR ld/23900 test. * testsuite/ld-elf/pr23900-1-32.rd: New file. * testsuite/ld-elf/pr23900-1-64.rd: Likewise. * testsuite/ld-elf/pr23900-1.d: Likewise. * testsuite/ld-elf/pr23900-1.s: Likewise. * testsuite/ld-elf/pr23900-2.s: Likewise. * testsuite/ld-elf/pr23900-2a.d: Likewise. * testsuite/ld-elf/pr23900-2b.d: Likewise. * testsuite/ld-i386/ibt-plt-1.d: Adjusted. * testsuite/ld-i386/ibt-plt-2c.d: Likewise. * testsuite/ld-i386/ibt-plt-2d.d: Likewise. * testsuite/ld-i386/ibt-plt-3d.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-1.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-2c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3c.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d-x32.d: Likewise. * testsuite/ld-x86-64/ibt-plt-3d.d: Likewise. * testsuite/ld-i386/pr23372c.d: Expect <None> for GNU_PROPERTY_X86_ISA_1_USED. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23372d-x32.d: Likewise. * testsuite/ld-x86-64/pr23372d.d: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Change GNU_PROPERTY_X86_ISA_1_USED bits to 0. * testsuite/ld-x86-64/property-x86-5b.s: Likewise.	7 years ago
Jeff Law	c68033869a	Fix typo/thinko in last change. * dw2gencfi.c (output_cie): Add missing semicolon in last change.	7 years ago

1 2 3 4 5 ...

7039 Commits (83f43c8344d752fb8266b4c4e2f42cf4e5a2f86e)