binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Victor Do Nascimento	c354600877	aarch64: rcpc3: Define address operand fields and inserter/extractors Beyond the need to encode any registers involved in data transfer and the address base register for load/stores, it is necessary to specify the data register addressing mode and whether the address register is to be pre/post-indexed, whereby loads may be post-indexed and stores pre-indexed with write-back. The use of a single bit to specify both the indexing mode and indexing value requires a novel function be written to accommodate this for address operand insertion in assembly and another for extraction in disassembly, along with the definition of two insn fields for use with these instructions. This therefore defines the following functions: - aarch64_ins_rcpc3_addr_opt_offset - aarch64_ins_rcpc3_addr_offset - aarch64_ext_rcpc3_addr_opt_offset - aarch64_ext_rcpc3_addr_offset It extends the `do_special_{encoding\|decoding}' functions and defines two rcpc3 instruction fields: - FLD_opc2 - FLD_rcpc3_size	3 years ago
Srinath Parvathaneni	39092c7a1f	aarch64: Add SVE2.1 dupq, eorqv and extq instructions. Hi, This patch add support for SVE2.1 instruction dupq, eorqv and extq. Regression testing for aarch64-none-elf target and found no regressions. Ok for binutils-master? Regards, Srinath.	3 years ago
Srinath Parvathaneni	89e06ec152	aarch64: Add support for FEAT_SME2p1 instructions. Hi, This patch add support for FEAT_SME2p1 and "movaz" instructions along with the optional flag +sme2p1. Following "movaz" instructions are add: Move and zero two ZA tile slices to vector registers. Move and zero four ZA tile slices to vector registers. Regression testing for aarch64-none-elf target and found no regressions. Ok for binutils-master? Regards, Srinath.	3 years ago
Alan Modra	fd67aa1129	Update year range in copyright notice of binutils files Adds two new external authors to etc/update-copyright.py to cover bfd/ax_tls.m4, and adds gprofng to dirs handled automatically, then updates copyright messages as follows: 1) Update cgen/utils.scm emitted copyrights. 2) Run "etc/update-copyright.py --this-year" with an extra external author I haven't committed, 'Kalray SA.', to cover gas testsuite files (which should have their copyright message removed). 3) Build with --enable-maintainer-mode --enable-cgen-maint=yes. 4) Check out /po/.pot which we don't update frequently.	3 years ago
Richard Sandiford	6efa660124	aarch64: Add the SME2 shift instructions There are two instruction formats here: - SQRSHR, SQRSHRU and UQRSHR, which operate on lists of two or four registers. - SQRSHRN, SQRSHRUN and UQRSHRN, which operate on lists of four registers. These are the first SME2 instructions to have immediate operands. The patch makes sure that, when parsing SME2 instructions with immediate operands, the new predicate-as-counter registers are parsed as registers rather than as #-less immediates.	3 years ago
Richard Sandiford	99e01a66b4	aarch64: Add the SME2 predicate-related instructions Implementation-wise, the main things to note here are: - the WHILE* instructions have forms that return a pair of predicate registers. This is the first time that we've had lists of predicate registers, and they wrap around after register 15 rather than after register 31. - the predicate-as-counter WHILE* instructions have a fourth operand that specifies the vector length. We can treat this as an enumeration, except that immediate values aren't allowed. - PEXT takes an unsuffixed predicate index of the form PN<n>[<imm>]. This is the first instance of a vector/predicate index having no suffix.	3 years ago
Richard Sandiford	b408ebbf52	aarch64: Add the SME2 multivector LD1 and ST1 instructions SME2 adds LD1 and ST1 variants for lists of 2 and 4 registers. The registers can be consecutive or strided. In the strided case, 2-register lists have a stride of 8, starting at register x0xxx. 4-register lists have a stride of 4, starting at register x00xx. The instructions are predicated on a predicate-as-counter register in the range pn8-pn15. Although we already had register fields with upper bounds of 7 and 15, this is the first plain register operand to have a nonzero lower bound. The patch uses the operand-specific data field to record the minimum value, rather than having separate inserters and extractors for each lower bound. This in turn required adding an extra bit to the field.	3 years ago
Richard Sandiford	d8773a8a5f	aarch64: Add the SME2 MOVA instructions SME2 defines new MOVA instructions for moving multiple registers to and from ZA. As with SME, the instructions are also available through MOV aliases. One notable feature of these instructions (and many other SME2 instructions) is that some register lists must start at a multiple of the list's size. The patch uses the general error "start register out of range" when this constraint isn't met, rather than an error specifically about multiples. This ensures that the error is consistent between these simple consecutive lists and later strided lists, for which the requirements aren't a simple multiple.	3 years ago
Alan Modra	d87bef3a7b	Update year range in copyright notice of binutils files The newer update-copyright.py fixes file encoding too, removing cr/lf on binutils/bfdtest2.c and ld/testsuite/ld-cygwin/exe-export.exp, and embedded cr in binutils/testsuite/binutils-all/ar.exp string match.	4 years ago
Alan Modra	a2c5833233	Update year range in copyright notice of binutils files The result of running etc/update-copyright.py --this-year, fixing all the files whose mode is changed by the script, plus a build with --enable-maintainer-mode --enable-cgen-maint=yes, then checking out /po/.pot which we don't update frequently. The copy of cgen was with commit d1dd5fcc38ead reverted as that commit breaks building of bfp opcodes files.	5 years ago
Richard Sandiford	6327658ee7	aarch64: Add support for +mops This patch adds support for FEAT_MOPS, an Armv8.8-A extension that provides memcpy and memset acceleration instructions. I took the perhaps controversial decision to generate the individual instruction forms using macros rather than list them out individually. This becomes useful with a follow-on patch to check that code follows the correct P/M/E sequence. [https://developer.arm.com/documentation/ddi0596/2021-09/Base-Instructions?lang=en] include/ * opcode/aarch64.h (AARCH64_FEATURE_MOPS): New macro. (AARCH64_ARCH_V8_8): Make armv8.8-a imply AARCH64_FEATURE_MOPS. (AARCH64_OPND_MOPS_ADDR_Rd): New aarch64_opnd. (AARCH64_OPND_MOPS_ADDR_Rs): Likewise. (AARCH64_OPND_MOPS_WB_Rn): Likewise. opcodes/ * aarch64-asm.h (ins_x0_to_x30): New inserter. * aarch64-asm.c (aarch64_ins_x0_to_x30): New function. * aarch64-dis.h (ext_x0_to_x30): New extractor. * aarch64-dis.c (aarch64_ext_x0_to_x30): New function. * aarch64-tbl.h (aarch64_feature_mops): New feature set. (aarch64_feature_mops_memtag): Likewise. (MOPS, MOPS_MEMTAG, MOPS_INSN, MOPS_MEMTAG_INSN) (MOPS_CPY_OP1_OP2_PME_INSN, MOPS_CPY_OP1_OP2_INSN, MOPS_CPY_OP1_INSN) (MOPS_CPY_INSN, MOPS_SET_OP1_OP2_PME_INSN, MOPS_SET_OP1_OP2_INSN) (MOPS_SET_INSN): New macros. (aarch64_opcode_table): Add MOPS instructions. (aarch64_opcode_table): Add entries for AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. * aarch64-opc.c (aarch64_print_operand): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (verify_three_different_regs): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ * doc/c-aarch64.texi: Document +mops. * config/tc-aarch64.c (parse_x0_to_x30): New function. (parse_operands): Handle AARCH64_OPND_MOPS_ADDR_Rd, AARCH64_OPND_MOPS_ADDR_Rs and AARCH64_OPND_MOPS_WB_Rn. (aarch64_features): Add "mops". * testsuite/gas/aarch64/mops.s, testsuite/gas/aarch64/mops.d: New test. * testsuite/gas/aarch64/mops_invalid.s, * testsuite/gas/aarch64/mops_invalid.d, * testsuite/gas/aarch64/mops_invalid.l: Likewise.	5 years ago
Przemyslaw Wirkus	d3de086010	aarch64: [SME] SVE2 instructions added to support SME This patch is adding new SVE2 instructions added to support SME extension. The following SVE2 instructions are added by the SME architecture: * PSEL, * REVD, SCLAMP and UCLAMP. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_pred_reg_with_index): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-9-illegal.d: New test. * testsuite/gas/aarch64/sme-9-illegal.l: New test. * testsuite/gas/aarch64/sme-9-illegal.s: New test. * testsuite/gas/aarch64/sme-9.d: New test. * testsuite/gas/aarch64/sme-9.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_PnT_Wm_imm. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_pred_reg_with_index): New inserter. * aarch64-dis.c (aarch64_ext_sme_pred_reg_with_index): New extractor. * aarch64-opc.c (aarch64_print_operand): Printout of OPND_SME_PnT_Wm_imm. * aarch64-opc.h (enum aarch64_field_kind): New bitfields FLD_SME_Rm, FLD_SME_i1, FLD_SME_tszh, FLD_SME_tszl. * aarch64-tbl.h (OP_SVE_NN_BHSD): New qualifier. (OP_SVE_QMQ): New qualifier. (struct aarch64_opcode): New instructions PSEL, REVD, SCLAMP and UCLAMP. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.	5 years ago
Przemyslaw Wirkus	3dd032c5fb	aarch64: [SME] Add SME mode selection and state access instructions This patch is adding new SME mode selection and state access instructions: * Add SMSTART and SMSTOP instructions. * Add SVCR system register. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_sm_za): New parser. (parse_operands): New parser. * testsuite/gas/aarch64/sme-8-illegal.d: New test. * testsuite/gas/aarch64/sme-8-illegal.l: New test. * testsuite/gas/aarch64/sme-8-illegal.s: New test. * testsuite/gas/aarch64/sme-8.d: New test. * testsuite/gas/aarch64/sme-8.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_SME_SM_ZA. (enum aarch64_insn_class): New instruction classes sme_start and sme_stop. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_pstatefield): New inserter. (aarch64_ins_sme_sm_za): New inserter. * aarch64-dis.c (aarch64_ext_imm): New extractor. (aarch64_ext_pstatefield): New extractor. (aarch64_ext_sme_sm_za): New extractor. * aarch64-opc.c (operand_general_constraint_met_p): New pstatefield value for SME instructions. (aarch64_print_operand): Printout for OPND_SME_SM_ZA. (SR_SME): New register SVCR. * aarch64-opc.h (F_REG_IN_CRM): New register endcoding. * aarch64-opc.h (F_IMM_IN_CRM): New immediate endcoding. (PSTATE_ENCODE_CRM): Encode CRm field. (PSTATE_DECODE_CRM): Decode CRm field. (PSTATE_ENCODE_CRM_IMM): Encode CRm immediate field. (PSTATE_DECODE_CRM_IMM): Decode CRm immediate field. (PSTATE_ENCODE_CRM_AND_IMM): Encode CRm and immediate field. * aarch64-tbl.h (struct aarch64_opcode): New SMSTART and SMSTOP instructions. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.	5 years ago
Przemyslaw Wirkus	01a4d08220	aarch64: [SME] Add LD1x, ST1x, LDR and STR instructions This patch is adding new loads and stores defined by SME instructions. gas/ChangeLog: * config/tc-aarch64.c (parse_sme_address): New parser. (parse_sme_za_hv_tiles_operand_with_braces): New parser. (parse_sme_za_array): New parser. (output_operand_error_record): Print error details if present. (parse_operands): Support new operands. * testsuite/gas/aarch64/sme-5-illegal.d: New test. * testsuite/gas/aarch64/sme-5-illegal.l: New test. * testsuite/gas/aarch64/sme-5-illegal.s: New test. * testsuite/gas/aarch64/sme-5.d: New test. * testsuite/gas/aarch64/sme-5.s: New test. * testsuite/gas/aarch64/sme-6-illegal.d: New test. * testsuite/gas/aarch64/sme-6-illegal.l: New test. * testsuite/gas/aarch64/sme-6-illegal.s: New test. * testsuite/gas/aarch64/sme-6.d: New test. * testsuite/gas/aarch64/sme-6.s: New test. * testsuite/gas/aarch64/sme-7-illegal.d: New test. * testsuite/gas/aarch64/sme-7-illegal.l: New test. * testsuite/gas/aarch64/sme-7-illegal.s: New test. * testsuite/gas/aarch64/sme-7.d: New test. * testsuite/gas/aarch64/sme-7.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New operands. (enum aarch64_insn_class): Added sme_ldr and sme_str. (AARCH64_OPDE_UNTIED_IMMS): New operand error kind. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. (aarch64_ins_sme_za_list): New inserter. (aarch64_ins_sme_za_array): New inserter. (aarch64_ins_sme_addr_ri_u4xvl): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): Added ins_sme_za_list, ins_sme_za_array and ins_sme_addr_ri_u4xvl. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. (aarch64_ext_sme_za_list): New extractor. (aarch64_ext_sme_za_array): New extractor. (aarch64_ext_sme_addr_ri_u4xvl): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): Added ext_sme_za_list, ext_sme_za_array and ext_sme_addr_ri_u4xvl. * aarch64-opc.c (operand_general_constraint_met_p): (aarch64_match_operands_constraint): Handle sme_ldr, sme_str and sme_misc. (aarch64_print_operand): New operands supported. * aarch64-tbl.h (OP_SVE_QUU): New qualifier. (OP_SVE_QZU): New qualifier. aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.	5 years ago
Przemyslaw Wirkus	7bb5f07c8a	aarch64: [SME] Add MOV and MOVA instructions This patch is adding new MOV (alias) and MOVA SME instruction. gas/ChangeLog: * config/tc-aarch64.c (enum sme_hv_slice): new enum. (struct reloc_entry): Added ZAH and ZAV registers. (parse_sme_immediate): Immediate parser. (parse_sme_za_hv_tiles_operand): ZA tile parser. (parse_sme_za_hv_tiles_operand_index): Index parser. (parse_operands): Added ZA tile parser calls. (REGNUMS): New macro. Regs with suffix. (REGSET16S): New macro. 16 regs with suffix. * testsuite/gas/aarch64/sme-2-illegal.d: New test. * testsuite/gas/aarch64/sme-2-illegal.l: New test. * testsuite/gas/aarch64/sme-2-illegal.s: New test. * testsuite/gas/aarch64/sme-2.d: New test. * testsuite/gas/aarch64/sme-2.s: New test. * testsuite/gas/aarch64/sme-2a.d: New test. * testsuite/gas/aarch64/sme-2a.s: New test. * testsuite/gas/aarch64/sme-3-illegal.d: New test. * testsuite/gas/aarch64/sme-3-illegal.l: New test. * testsuite/gas/aarch64/sme-3-illegal.s: New test. * testsuite/gas/aarch64/sme-3.d: New test. * testsuite/gas/aarch64/sme-3.s: New test. * testsuite/gas/aarch64/sme-3a.d: New test. * testsuite/gas/aarch64/sme-3a.s: New test. include/ChangeLog: * opcode/aarch64.h (enum aarch64_opnd): New enums AARCH64_OPND_SME_ZA_HV_idx_src and AARCH64_OPND_SME_ZA_HV_idx_dest. (struct aarch64_opnd_info): New ZA tile vector struct. opcodes/ChangeLog: * aarch64-asm.c (aarch64_ins_sme_za_hv_tiles): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_sme_za_hv_tiles. * aarch64-dis.c (aarch64_ext_sme_za_hv_tiles): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_sme_za_hv_tiles. * aarch64-opc.c (aarch64_print_operand): Handle SME_ZA_HV_idx_src and SME_ZA_HV_idx_dest. * aarch64-opc.h (enum aarch64_field_kind): New enums FLD_SME_size_10, FLD_SME_Q, FLD_SME_V and FLD_SME_Rv. (struct aarch64_operand): Increase fields size to 5. * aarch64-tbl.h (OP_SME_BHSDQ_PM_BHSDQ): New qualifiers aarch64-asm-2.c: Regenerate. aarch64-dis-2.c: Regenerate. aarch64-opc-2.c: Regenerate.	5 years ago
Alan Modra	78933a4ad9	Use bool in opcodes cpu/ * frv.opc: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout. opcodes/ * sysdep.h (POISON_BFD_BOOLEAN): Define. * aarch64-asm-2.c, * aarch64-asm.c, * aarch64-asm.h, * aarch64-dis-2.c, * aarch64-dis.c, * aarch64-dis.h, * aarch64-gen.c, * aarch64-opc.c, * aarch64-opc.h, * arc-dis.c, * arc-dis.h, * arc-fxi.h, * arc-opc.c, * arm-dis.c, * bfin-dis.c, * cris-dis.c, * csky-dis.c, * csky-opc.h, * dis-buf.c, * disassemble.c, * frv-opc.c, * frv-opc.h, * h8300-dis.c, * i386-dis.c, * m68k-dis.c, * metag-dis.c, * microblaze-dis.c, * microblaze-dis.h, * micromips-opc.c, * mips-dis.c, * mips-formats.h, * mips-opc.c, * mips16-opc.c, * mmix-dis.c, * msp430-dis.c, * nds32-dis.c, * nfp-dis.c, * nios2-dis.c, * ppc-dis.c, * riscv-dis.c, * score-dis.c, * score7-dis.c, * tic6x-dis.c, * v850-dis.c, * vax-dis.c, * wasm32-dis.c, * xtensa-dis.c: Replace bfd_boolean with bool, FALSE with false, and TRUE with true throughout.	5 years ago
Alan Modra	250d07de5c	Update year range in copyright notice of binutils files	6 years ago
Przemyslaw Wirkus	fd195909ce	aarch64: Add DSB instruction Armv8.7-a variant This patch adds new variant (nXS) of DSB memory barrier instruction available in Armv8.7-a. New nXS variant has different encoding in comparison with pre Armv8.7-a DSB memory barrier variant thus new instruction and new operand was added. DSB memory nXS barrier variant specifies the limitation on the barrier operation. Allowed values are: DSB SYnXS\|#28 DSB ISHnXS\|#24 DSB NSHnXS\|#20 DSB OSHnXS\|#16 Please note that till now, for barriers, barrier operation was encoded in 4-bit unsigned immediate CRm field (in the range 0 to 15). For DSB memory nXS barrier variant, barrier operation is a 5-bit unsigned assembly instruction immediate, encoded in instruction in two bits CRm<3:2>: CRm<3:2> #imm 00 16 01 20 10 24 11 28 This patch extends current AArch64 barrier instructions with above mapping. Notable patch changes include: + New DSB memory barrier variant encoding for Armv8.7-a. + New operand BARRIER_DSB_NXS for above instruction in order to distinguish between existing and new DSB instruction flavour. + New set of DSB nXS barrier options. + New instruction inserter and extractor map between instruction immediate 5-bit value and 2-bit CRm field of the instruction itself (see FLD_CRm_dsb_nxs). + Regeneration of aarch64-[asm\|dis\|opc]-2.c files. + Test cases to cover new instruction assembling and disassembling. For more details regarding DSB memory barrier instruction and its Armv8.7-a flavour please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document pages 132-133 of [0]. [0]: https://developer.arm.com/docs/ddi0596/i gas/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * NEWS: Docs update. * config/tc-aarch64.c (parse_operands): Add AARCH64_OPND_BARRIER_DSB_NXS handler. (md_begin): Add content of aarch64_barrier_dsb_nxs_options to aarch64_barrier_opt_hsh hash. * testsuite/gas/aarch64/system-4-invalid.d: New test. * testsuite/gas/aarch64/system-4-invalid.l: New test. * testsuite/gas/aarch64/system-4-invalid.s: New test. * testsuite/gas/aarch64/system-4.d: New test. * testsuite/gas/aarch64/system-4.s: New test. include/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * opcode/aarch64.h (enum aarch64_opnd): New operand AARCH64_OPND_BARRIER_DSB_NXS. (aarch64_barrier_dsb_nxs_options): Declare DSB nXS options. opcodes/ChangeLog: 2020-10-23 Przemyslaw Wirkus <przemyslaw.wirkus@arm.com> * aarch64-asm.c (aarch64_ins_barrier_dsb_nxs): New inserter. * aarch64-asm.h (AARCH64_DECL_OPD_INSERTER): New inserter ins_barrier_dsb_nx. * aarch64-dis.c (aarch64_ext_barrier_dsb_nxs): New extractor. * aarch64-dis.h (AARCH64_DECL_OPD_EXTRACTOR): New extractor ext_barrier_dsb_nx. * aarch64-opc.c (aarch64_print_operand): New options table aarch64_barrier_dsb_nxs_options. * aarch64-opc.h (enum aarch64_field_kind): New field name FLD_CRm_dsb_nxs. * aarch64-tbl.h (struct aarch64_opcode): Define DSB nXS barrier Armv8.7-a instruction. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.	6 years ago
Sudakshina Das	c2e5c986b3	[AArch64, Binutils] Add missing TSB instruction This patch implements the TSB instructions: https://developer.arm.com/docs/ddi0596/f/base-instructions-alphabetic-order/ tsb-csync-trace-synchronization-barrier Since TSB and PSB both use the same (and only) argument "CSYNC", this patch reuses it for TSB. However, the same argument would imply different value for CRm:Op2 which are anyway fixed values, so I have diverted the inserter/extracter function to dummy versions instead of the "hint" version. The operand checker part still uses the existing infratructure for AARCH64_OPND_BARRIER_PSB to make sure the operand is parsed correctly. gas/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_barrier_psb): Update error messages to include TSB. * testsuite/gas/aarch64/system-2.d: Update -march and new tsb tests. * testsuite/gas/aarch64/system-2.s: Add new tsb tests. * testsuite/gas/aarch64/system.d: Update. opcodes/ChangeLog: 2020-04-20 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_none): New. * aarch64-asm.h (ins_none): New declaration. * aarch64-dis.c (aarch64_ext_none): New. * aarch64-dis.h (ext_none): New declaration. * aarch64-opc.c (aarch64_print_operand): Update case for AARCH64_OPND_BARRIER_PSB. * aarch64-tbl.h (aarch64_opcode_table): Add tsb. (AARCH64_OPERANDS): Update inserter/extracter for AARCH64_OPND_BARRIER_PSB to use new dummy functions. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.	6 years ago
Alan Modra	b3adc24a07	Update year range in copyright notice of binutils files	7 years ago
Sudi Das	550fd7bf68	AArch64: Remove ldgv and stgv instructions from Armv8.5-A Memory Tagging Extension. This patch is part of a series of patches to introduce a few changes to the Armv8.5-A Memory Tagging Extension. This patch removes the LDGV and STGV instructions. These instructions needed special infrastructure to support [base]! style for addressing mode. That is also removed now. Committed on behalf of Sudakshina Das. * gas/ChangeLog * * config/tc-aarch64.c (parse_address_main): Remove support for [base]! address expression. (parse_operands): Remove support for AARCH64_OPND_ADDR_SIMPLE_2. (warn_unpredictable_ldst): Remove support for ldstgv_indexed. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Remove tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * include/ChangeLog * * opcode/aarch64.h (enum aarch64_opnd): Remove AARCH64_OPND_ADDR_SIMPLE_2. (enum aarch64_insn_class): Remove ldstgv_indexed. * opcodes/ChangeLog * * aarch64-asm.c (aarch64_ins_addr_simple_2): Remove. * aarch64-asm.h (ins_addr_simple_2): Likeiwse. * aarch64-dis.c (aarch64_ext_addr_simple_2): Likewise. * aarch64-dis.h (ext_addr_simple_2): Likewise. * aarch64-opc.c (operand_general_constraint_met_p): Remove case for ldstgv_indexed. (aarch64_print_operand): Remove case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (struct aarch64_opcode): Remove ldgv and stgv. (AARCH64_OPERANDS): Remove ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated.	8 years ago
Alan Modra	827041555a	Update year range in copyright notice of binutils files	8 years ago
Sudakshina Das	503ba60025	[BINUTILS, AARCH64, 6/8] Add Tag getting instruction in Memory Tagging Extension This patch is part of the patch series to add support for ARMv8.5-A Memory Tagging Extensions which is an optional extension to ARMv8.5-A and is enabled using the +memtag command line option. This patch add support to the Bulk Allocation Tag instructions from MTE. These are the following instructions added in this patch: - LDGV <Xt>, [<Xn\|SP>]! - STGV <Xt>, [<Xn\|SP>]! This needed a new kind of operand for the new addressing [<Xn\|SP>]! since this has no offset and only takes a pre-indexed version. Hence AARCH64_OPND_ADDR_SIMPLE_2 and ldtdgv_indexed are introduced. (AARCH64_OPND_ADDR_SIMPLE fulfilled the no offset criteria but does not allow writeback). We also needed new encoding and decoding functions to be able to do the same. where <Xt> : Is the 64-bit destination GPR. <Xn\|SP> : Is the 64-bit first source GPR or Stack pointer. * include/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * opcode/aarch64.h (aarch64_opnd): Add AARCH64_OPND_ADDR_SIMPLE_2. (aarch64_insn_class): Add ldstgv_indexed. * opcodes/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * aarch64-asm.c (aarch64_ins_addr_simple_2): New. * aarch64-asm.h (ins_addr_simple_2): Declare the above. * aarch64-dis.c (aarch64_ext_addr_simple_2): New. * aarch64-dis.h (ext_addr_simple_2): Declare the above. * aarch64-opc.c (operand_general_constraint_met_p): Add case for AARCH64_OPND_ADDR_SIMPLE_2 and ldstgv_indexed. (aarch64_print_operand): Add case for AARCH64_OPND_ADDR_SIMPLE_2. * aarch64-tbl.h (aarch64_opcode_table): Add stgv and ldgv. (AARCH64_OPERANDS): Define ADDR_SIMPLE_2. * aarch64-asm-2.c: Regenerated. * aarch64-dis-2.c: Regenerated. * aarch64-opc-2.c: Regenerated. * gas/ChangeLog * 2018-11-12 Sudakshina Das <sudi.das@arm.com> * config/tc-aarch64.c (parse_operands): Add switch case for AARCH64_OPND_ADDR_SIMPLE_2 and allow [base]! for it. (warn_unpredictable_ldst): Exempt ldstgv_indexed for ldgv. * testsuite/gas/aarch64/armv8_5-a-memtag.s: Add tests for ldgv and stgv. * testsuite/gas/aarch64/armv8_5-a-memtag.d: Likewise. * testsuite/gas/aarch64/illegal-memtag.s: Likewise. * testsuite/gas/aarch64/illegal-memtag.l: Likewise.	8 years ago
Tamar Christina	561a72d4dd	Modify AArch64 Assembly and disassembly functions to be able to fail and report why. This patch if the first patch in a series to add the ability to add constraints to system registers that an instruction must adhere to in order for the register to be usable with that instruction. These constraints can also be used to disambiguate between registers with the same encoding during disassembly. This patch adds a new flags entry in the sysreg structures and ensures it is filled in and read out during assembly/disassembly. It also adds the ability for the assemble and disassemble functions to be able to gracefully fail and re-use the existing error reporting infrastructure. The return type of these functions are changed to a boolean to denote success or failure and the error structure is passed around to them. This requires aarch64-gen changes so a lot of the changes here are just mechanical. gas/ PR binutils/21446 * config/tc-aarch64.c (parse_sys_reg): Return register flags. (parse_operands): Fill in register flags. gdb/ PR binutils/21446 * aarch64-tdep.c (aarch64_analyze_prologue, aarch64_software_single_step, aarch64_displaced_step_copy_insn): Indicate not interested in errors. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_opnd_info): Change sysreg to struct. (aarch64_decode_insn): Accept error struct. opcodes/ PR binutils/21446 * aarch64-asm.h (aarch64_insert_operand, aarch64_##x): Return boolean and take error struct. * aarch64-asm.c (aarch64_ext_regno, aarch64_ins_reglane, aarch64_ins_reglist, aarch64_ins_ldst_reglist, aarch64_ins_ldst_reglist_r, aarch64_ins_ldst_elemlist, aarch64_ins_advsimd_imm_shift, aarch64_ins_imm, aarch64_ins_imm_half, aarch64_ins_advsimd_imm_modified, aarch64_ins_fpimm, aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2, aarch64_ins_fbits, aarch64_ins_aimm, aarch64_ins_limm_1, aarch64_ins_limm, aarch64_ins_inv_limm, aarch64_ins_ft, aarch64_ins_addr_simple, aarch64_ins_addr_regoff, aarch64_ins_addr_offset, aarch64_ins_addr_simm, aarch64_ins_addr_simm10, aarch64_ins_addr_uimm12, aarch64_ins_simd_addr_post, aarch64_ins_cond, aarch64_ins_sysreg, aarch64_ins_pstatefield, aarch64_ins_sysins_op, aarch64_ins_barrier, aarch64_ins_prfop, aarch64_ins_hint, aarch64_ins_reg_extended, aarch64_ins_reg_shifted, aarch64_ins_sve_addr_ri_s4xvl, aarch64_ins_sve_addr_ri_s6xvl, aarch64_ins_sve_addr_ri_s9xvl, aarch64_ins_sve_addr_ri_s4, aarch64_ins_sve_addr_ri_u6, aarch64_ins_sve_addr_rr_lsl, aarch64_ins_sve_addr_rz_xtw, aarch64_ins_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ins_sve_addr_zz_lsl, aarch64_ins_sve_addr_zz_sxtw, aarch64_ins_sve_addr_zz_uxtw, aarch64_ins_sve_aimm, aarch64_ins_sve_asimm, aarch64_ins_sve_index, aarch64_ins_sve_limm_mov, aarch64_ins_sve_quad_index, aarch64_ins_sve_reglist, aarch64_ins_sve_scale, aarch64_ins_sve_shlimm, aarch64_ins_sve_shrimm, aarch64_ins_sve_float_half_one, aarch64_ins_sve_float_half_two, aarch64_ins_sve_float_zero_one, aarch64_opcode_encode): Likewise. * aarch64-dis.h (aarch64_extract_operand, aarch64_##x): Likewise. * aarch64-dis.c (aarch64_ext_regno, aarch64_ext_reglane, aarch64_ext_reglist, aarch64_ext_ldst_reglist, aarch64_ext_ldst_reglist_r, aarch64_ext_ldst_elemlist, aarch64_ext_advsimd_imm_shift, aarch64_ext_imm, aarch64_ext_imm_half, aarch64_ext_advsimd_imm_modified, aarch64_ext_fpimm, aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2, aarch64_ext_fbits, aarch64_ext_aimm, aarch64_ext_limm_1, aarch64_ext_limm, decode_limm, aarch64_ext_inv_limm, aarch64_ext_ft, aarch64_ext_addr_simple, aarch64_ext_addr_regoff, aarch64_ext_addr_offset, aarch64_ext_addr_simm, aarch64_ext_addr_simm10, aarch64_ext_addr_uimm12, aarch64_ext_simd_addr_post, aarch64_ext_cond, aarch64_ext_sysreg, aarch64_ext_pstatefield, aarch64_ext_sysins_op, aarch64_ext_barrier, aarch64_ext_prfop, aarch64_ext_hint, aarch64_ext_reg_extended, aarch64_ext_reg_shifted, aarch64_ext_sve_addr_ri_s4xvl, aarch64_ext_sve_addr_ri_s6xvl, aarch64_ext_sve_addr_ri_s9xvl, aarch64_ext_sve_addr_ri_s4, aarch64_ext_sve_addr_ri_u6, aarch64_ext_sve_addr_rr_lsl, aarch64_ext_sve_addr_rz_xtw, aarch64_ext_sve_addr_zi_u5, aarch64_ext_sve_addr_zz, aarch64_ext_sve_addr_zz_lsl, aarch64_ext_sve_addr_zz_sxtw, aarch64_ext_sve_addr_zz_uxtw, aarch64_ext_sve_aimm, aarch64_ext_sve_asimm, aarch64_ext_sve_index, aarch64_ext_sve_limm_mov, aarch64_ext_sve_quad_index, aarch64_ext_sve_reglist, aarch64_ext_sve_scale, aarch64_ext_sve_shlimm, aarch64_ext_sve_shrimm, aarch64_ext_sve_float_half_one, aarch64_ext_sve_float_half_two, aarch64_ext_sve_float_zero_one, aarch64_opcode_decode): Likewise. (determine_disassembling_preference, aarch64_decode_insn, print_insn_aarch64_word, print_insn_data): Take errors struct. (print_insn_aarch64): Use errors. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-gen.c (print_operand_inserter): Use errors and change type to boolean in aarch64_insert_operan. (print_operand_extractor): Likewise. * aarch64-opc.c (aarch64_print_operand): Use sysreg struct.	8 years ago
Alan Modra	219d1afa89	Update year range in copyright notice of binutils files	9 years ago
Tamar Christina	f42f1a1d6c	Adds the new Fields and Operand types for the new instructions in Armv8.4-a. gas/ * config/tc-aarch64.c (process_omitted_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2 and AARCH64_OPND_IMM_2. (parse_operands): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_IMM_2, AARCH64_OPND_MASK and AARCH64_OPND_ADDR_OFFSET. include/ * opcode/aarch64.h: (aarch64_opnd): Add AARCH64_OPND_Va, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2, AARCH64_OPND_ADDR_OFFSET and AARCH64_OPND_SM3_IMM2. (aarch64_insn_class): Add cryptosm3 and cryptosm4. (arch64_feature_set): Make uint64_t. opcodes/ * aarch64-asm.h (ins_addr_offset): New. * aarch64-asm.c (aarch64_ins_reglane): Add cryptosm3. (aarch64_ins_addr_offset): New. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_addr_offset): New. * aarch64-dis.c (aarch64_ext_reglane): Add cryptosm3. (aarch64_ext_addr_offset): New. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (aarch64_field_kind): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. * aarch64-opc.c (fields): Add FLD_imm6_2, FLD_imm4_2 and FLD_SM3_imm2. (operand_general_constraint_met_p): Add AARCH64_OPND_ADDR_OFFSET. (aarch64_print_operand): Add AARCH64_OPND_Va, AARCH64_OPND_SM3_IMM2, AARCH64_OPND_MASK, AARCH64_OPND_IMM_2 and AARCH64_OPND_ADDR_OFFSET. * aarch64-opc-2.c (Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2): New. * aarch64-tbl.h (aarch64_opcode_table): Add Va, MASK, IMM_2, ADDR_OFFSET, SM3_IMM2.	9 years ago
Richard Sandiford	582e12bf76	[AArch64] Additional SVE instructions This patch supports some additions to the SVE architecture prior to its public release. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4x16) (AARCH64_OPND_SVE_IMM_ROT1, AARCH64_OPND_SVE_IMM_ROT2) (AARCH64_OPND_SVE_Zm3_INDEX, AARCH64_OPND_SVE_Zm3_22_INDEX) (AARCH64_OPND_SVE_Zm4_INDEX): New aarch64_opnds. opcodes/ * aarch64-tbl.h (OP_SVE_HMH, OP_SVE_VMU_HSD, OP_SVE_VMVU_HSD) (OP_SVE_VMVV_HSD, OP_SVE_VMVVU_HSD, OP_SVE_VM_HSD, OP_SVE_VUVV_HSD) (OP_SVE_VUV_HSD, OP_SVE_VU_HSD, OP_SVE_VVVU_H, OP_SVE_VVVU_S) (OP_SVE_VVVU_HSD, OP_SVE_VVV_D, OP_SVE_VVV_D_H, OP_SVE_VVV_H) (OP_SVE_VVV_HSD, OP_SVE_VVV_S, OP_SVE_VVV_S_B, OP_SVE_VVV_SD_BH) (OP_SVE_VV_BHSDQ, OP_SVE_VV_HSD, OP_SVE_VZVV_HSD, OP_SVE_VZV_HSD) (OP_SVE_V_HSD): New macros. (OP_SVE_VMU_SD, OP_SVE_VMVU_SD, OP_SVE_VM_SD, OP_SVE_VUVV_SD) (OP_SVE_VU_SD, OP_SVE_VVVU_SD, OP_SVE_VVV_SD, OP_SVE_VZVV_SD) (OP_SVE_VZV_SD, OP_SVE_V_SD): Delete. (aarch64_opcode_table): Add new SVE instructions. (aarch64_opcode_table): Use imm_rotate{1,2} instead of imm_rotate for rotation operands. Add new SVE operands. * aarch64-asm.h (ins_sve_addr_ri_s4): New inserter. (ins_sve_quad_index): Likewise. (ins_imm_rotate): Split into... (ins_imm_rotate1, ins_imm_rotate2): ...these two inserters. * aarch64-asm.c (aarch64_ins_imm_rotate): Split into... (aarch64_ins_imm_rotate1, aarch64_ins_imm_rotate2): ...these two functions. (aarch64_ins_sve_addr_ri_s4): New function. (aarch64_ins_sve_quad_index): Likewise. (do_misc_encoding): Handle "MOV Zn.Q, Qm". * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4): New extractor. (ext_sve_quad_index): Likewise. (ext_imm_rotate): Split into... (ext_imm_rotate1, ext_imm_rotate2): ...these two extractors. * aarch64-dis.c (aarch64_ext_imm_rotate): Split into... (aarch64_ext_imm_rotate1, aarch64_ext_imm_rotate2): ...these two functions. (aarch64_ext_sve_addr_ri_s4): New function. (aarch64_ext_sve_quad_index): Likewise. (aarch64_ext_sve_index): Allow quad indices. (do_misc_decoding): Likewise. * aarch64-dis-2.c: Regenerate. * aarch64-opc.h (FLD_SVE_i3h, FLD_SVE_rot1, FLD_SVE_rot2): New aarch64_field_kinds. (OPD_F_OD_MASK): Widen by one bit. (OPD_F_NO_ZR): Bump accordingly. (get_operand_field_width): New function. * aarch64-opc.c (fields): Add new SVE fields. (operand_general_constraint_met_p): Handle new SVE operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. gas/ * doc/c-aarch64.texi: Document that sve implies fp16, simd and compnum. * config/tc-aarch64.c (parse_vector_type_for_operand): Allow .q to be used with SVE registers. (parse_operands): Handle new SVE operands. (aarch64_features): Make "sve" require F16 rather than FP. Also require COMPNUM. * testsuite/gas/aarch64/sve.s: Add tests for new instructions. Include compnum tests. * testsuite/gas/aarch64/sve.d: Update accordingly. * testsuite/gas/aarch64/sve-invalid.s: Add tests for new instructions. * testsuite/gas/aarch64/sve-invalid.l: Update accordingly. Also update expected output for new FMOV and MOV alternatives.	10 years ago
Alan Modra	2571583aed	Update year range in copyright notice of all files.	10 years ago
Szabolcs Nagy	c2c4ff8d52	[AArch64] Add ARMv8.3 FCMLA and FCADD instructions Add support for FCMLA and FCADD complex arithmetic SIMD instructions. FCMLA has an indexed element variant where the index range has to be treated specially because a complex number takes two elements and the indexed vector size depends on the other operands. These complex number SIMD instructions are part of ARMv8.3 https://community.arm.com/groups/processors/blog/2016/10/27/armv8-a-architecture-2016-additions include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_IMM_ROT1, AARCH64_OPND_IMM_ROT2, AARCH64_OPND_IMM_ROT3. (enum aarch64_op): Add OP_FCMLA_ELEM. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_V3SAMEHSD_ROT, QL_ELEMENT_ROT): Define. (aarch64_feature_simd_v8_3, SIMD_V8_3): Define. (aarch64_opcode_table): Add fcmla and fcadd. (AARCH64_OPERANDS): Add IMM_ROT{1,2,3}. * aarch64-asm.h (aarch64_ins_imm_rotate): Declare. * aarch64-asm.c (aarch64_ins_imm_rotate): Define. * aarch64-dis.h (aarch64_ext_imm_rotate): Declare. * aarch64-dis.c (aarch64_ext_imm_rotate): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_rotate{1,2,3}. * aarch64-opc.c (fields): Add FLD_rotate{1,2,3}. (operand_general_constraint_met_p): Rotate and index range check. (aarch64_print_operand): Handle rotate operand. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Likewise. * aarch64-opc-2.c: Likewise. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_IMM_ROT. testsuite/gas/aarch64/advsimd-armv8_3.d: New. * testsuite/gas/aarch64/advsimd-armv8_3.s: New. * testsuite/gas/aarch64/illegal-fcmla.s: New. * testsuite/gas/aarch64/illegal-fcmla.l: New. * testsuite/gas/aarch64/illegal-fcmla.d: New.	10 years ago
Szabolcs Nagy	3f06e55061	[AArch64] Add ARMv8.3 combined pointer authentication load instructions Add support for ARMv8.3 LDRAA and LDRAB combined pointer authentication and load instructions. These instructions authenticate the base register and load 8 byte from it plus a scaled 10-bit offset with optional writeback to update the base register. A new instruction class (ldst_imm10) and operand type (AARCH64_OPND_ADDR_SIMM10) were introduced to handle the special addressing form. include/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * opcode/aarch64.h (enum aarch64_opnd): Add AARCH64_OPND_ADDR_SIMM10. (enum aarch64_insn_class): Add ldst_imm10. opcodes/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * aarch64-tbl.h (QL_X1NIL): New. (arch64_opcode_table): Add ldraa, ldrab. (AARCH64_OPERANDS): Add "ADDR_SIMM10". * aarch64-asm.h (aarch64_ins_addr_simm10): Declare. * aarch64-asm.c (aarch64_ins_addr_simm10): Define. * aarch64-dis.h (aarch64_ext_addr_simm10): Declare. * aarch64-dis.c (aarch64_ext_addr_simm10): Define. * aarch64-opc.h (enum aarch64_field_kind): Add FLD_S_simm10. * aarch64-opc.c (fields): Add data for FLD_S_simm10. (operand_general_constraint_met_p): Handle AARCH64_OPND_ADDR_SIMM10. (aarch64_print_operand): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis-2.c: Regenerate. * aarch64-opc-2.c: Regenerate. gas/ 2016-11-18 Szabolcs Nagy <szabolcs.nagy@arm.com> * config/tc-aarch64.c (parse_operands): Handle AARCH64_OPND_ADDR_SIMM10. (fix_insn): Likewise. (warn_unpredictable_ldst): Handle ldst_imm10. * testsuite/gas/aarch64/pac.s: Add ldraa and ldrab tests. * testsuite/gas/aarch64/pac.d: Likewise. * testsuite/gas/aarch64/illegal-ldraa.s: New. * testsuite/gas/aarch64/illegal-ldraa.l: New. * testsuite/gas/aarch64/illegal-ldraa.d: New.	10 years ago
Richard Sandiford	165d495085	[AArch64][SVE 28/32] Add SVE FP immediate operands This patch adds support for the new SVE floating-point immediate operands. One operand uses the same 8-bit encoding as base AArch64, but in a different position. The others use a single bit to select between two values. One of the single-bit operands is a choice between 0 and 1, where 0 is not a valid 8-bit encoding. I think the cleanest way of handling these single-bit immediates is therefore to use the IEEE float encoding itself as the immediate value and select between the two possible values when encoding and decoding. As described in the covering note for the patch that added F_STRICT, we get better error messages by accepting unsuffixed vector registers and leaving the qualifier matching code to report an error. This means that we carry on parsing the other operands, and so can try to parse FP immediates for invalid instructions like: fcpy z0, #2.5 In this case there is no suffix to tell us whether the immediate should be treated as single or double precision. Again, we get better error messages by picking one (arbitrary) immediate size and reporting an error for the missing suffix later. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_FPIMM8): New aarch64_opnd. (AARCH64_OPND_SVE_I1_HALF_ONE, AARCH64_OPND_SVE_I1_HALF_TWO) (AARCH64_OPND_SVE_I1_ZERO_ONE): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE FP immediate operands. * aarch64-opc.h (FLD_SVE_i1): New aarch64_field_kind. * aarch64-opc.c (fields): Add corresponding entry. (operand_general_constraint_met_p): Handle the new SVE FP immediate operands. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_float_half_one, ins_sve_float_half_two) (ins_sve_float_zero_one): New inserters. * aarch64-asm.c (aarch64_ins_sve_float_half_one): New function. (aarch64_ins_sve_float_half_two): Likewise. (aarch64_ins_sve_float_zero_one): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_float_half_one, ext_sve_float_half_two) (ext_sve_float_zero_one): New extractors. * aarch64-dis.c (aarch64_ext_sve_float_half_one): New function. (aarch64_ext_sve_float_half_two): Likewise. (aarch64_ext_sve_float_zero_one): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (double_precision_operand_p): New function. (parse_operands): Use it to calculate the dp_p input to parse_aarch64_imm_float. Handle the new SVE FP immediate operands.	10 years ago
Richard Sandiford	e950b34539	[AArch64][SVE 27/32] Add SVE integer immediate operands This patch adds the new SVE integer immediate operands. There are three kinds: - simple signed and unsigned ranges, but with new widths and positions. - 13-bit logical immediates. These have the same form as in base AArch64, but at a different bit position. In the case of the "MOV Zn.<T>, #<limm>" alias of DUPM, the logical immediate <limm> is not allowed to be a valid DUP immediate, since DUP is preferred over DUPM for constants that both instructions can handle. - a new 9-bit arithmetic immediate, of the form "<imm8>{, LSL #8}". In some contexts the operand is signed and in others it's unsigned. As an extension, we allow shifted immediates to be written as a single integer, e.g. "#256" is equivalent to "#1, LSL #8". We also use the shiftless form as the preferred disassembly, except for the special case of "#0, LSL #8" (a redundant encoding of 0). include/ * opcode/aarch64.h (AARCH64_OPND_SIMM5): New aarch64_opnd. (AARCH64_OPND_SVE_AIMM, AARCH64_OPND_SVE_ASIMM) (AARCH64_OPND_SVE_INV_LIMM, AARCH64_OPND_SVE_LIMM) (AARCH64_OPND_SVE_LIMM_MOV, AARCH64_OPND_SVE_SHLIMM_PRED) (AARCH64_OPND_SVE_SHLIMM_UNPRED, AARCH64_OPND_SVE_SHRIMM_PRED) (AARCH64_OPND_SVE_SHRIMM_UNPRED, AARCH64_OPND_SVE_SIMM5) (AARCH64_OPND_SVE_SIMM5B, AARCH64_OPND_SVE_SIMM6) (AARCH64_OPND_SVE_SIMM8, AARCH64_OPND_SVE_UIMM3) (AARCH64_OPND_SVE_UIMM7, AARCH64_OPND_SVE_UIMM8) (AARCH64_OPND_SVE_UIMM8_53): Likewise. (aarch64_sve_dupm_mov_immediate_p): Declare. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE integer immediate operands. * aarch64-opc.h (FLD_SVE_immN, FLD_SVE_imm3, FLD_SVE_imm5) (FLD_SVE_imm5b, FLD_SVE_imm7, FLD_SVE_imm8, FLD_SVE_imm9) (FLD_SVE_immr, FLD_SVE_imms, FLD_SVE_tszh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries. (operand_general_constraint_met_p): Handle the new SVE integer immediate operands. (aarch64_print_operand): Likewise. (aarch64_sve_dupm_mov_immediate_p): New function. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_inv_limm, ins_sve_aimm, ins_sve_asimm) (ins_sve_limm_mov, ins_sve_shlimm, ins_sve_shrimm): New inserters. * aarch64-asm.c (aarch64_ins_limm_1): New function, split out from... (aarch64_ins_limm): ...here. (aarch64_ins_inv_limm): New function. (aarch64_ins_sve_aimm): Likewise. (aarch64_ins_sve_asimm): Likewise. (aarch64_ins_sve_limm_mov): Likewise. (aarch64_ins_sve_shlimm): Likewise. (aarch64_ins_sve_shrimm): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_inv_limm, ext_sve_aimm, ext_sve_asimm) (ext_sve_limm_mov, ext_sve_shlimm, ext_sve_shrimm): New extractors. * aarch64-dis.c (decode_limm): New function, split out from... (aarch64_ext_limm): ...here. (aarch64_ext_inv_limm): New function. (decode_sve_aimm): Likewise. (aarch64_ext_sve_aimm): Likewise. (aarch64_ext_sve_asimm): Likewise. (aarch64_ext_sve_limm_mov): Likewise. (aarch64_top_bit): Likewise. (aarch64_ext_sve_shlimm): Likewise. (aarch64_ext_sve_shrimm): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (parse_operands): Handle the new SVE integer immediate operands.	10 years ago
Richard Sandiford	98907a7049	[AArch64][SVE 26/32] Add SVE MUL VL addressing modes This patch adds support for addresses of the form: [<base>, #<offset>, MUL VL] This involves adding a new AARCH64_MOD_MUL_VL modifier, which is why I split it out from the other addressing modes. For LD2, LD3 and LD4, the offset must be a multiple of the structure size, so for LD3 the possible values are 0, 3, 6, .... The patch therefore extends value_aligned_p to handle non-power-of-2 alignments. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_S4xVL): New aarch64_opnd. (AARCH64_OPND_SVE_ADDR_RI_S4x2xVL, AARCH64_OPND_SVE_ADDR_RI_S4x3xVL) (AARCH64_OPND_SVE_ADDR_RI_S4x4xVL, AARCH64_OPND_SVE_ADDR_RI_S6xVL) (AARCH64_OPND_SVE_ADDR_RI_S9xVL): Likewise. (AARCH64_MOD_MUL_VL): New aarch64_modifier_kind. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new MUL VL operands. * aarch64-opc.c (aarch64_operand_modifiers): Initialize the AARCH64_MOD_MUL_VL entry. (value_aligned_p): Cope with non-power-of-two alignments. (operand_general_constraint_met_p): Handle the new MUL VL addresses. (print_immediate_offset_address): Likewise. (aarch64_print_operand): Likewise. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_addr_ri_s4xvl, ins_sve_addr_ri_s6xvl) (ins_sve_addr_ri_s9xvl): New inserters. * aarch64-asm.c (aarch64_ins_sve_addr_ri_s4xvl): New function. (aarch64_ins_sve_addr_ri_s6xvl): Likewise. (aarch64_ins_sve_addr_ri_s9xvl): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_s4xvl, ext_sve_addr_ri_s6xvl) (ext_sve_addr_ri_s9xvl): New extractors. * aarch64-dis.c (aarch64_ext_sve_addr_reg_mul_vl): New function. (aarch64_ext_sve_addr_ri_s4xvl): Likewise. (aarch64_ext_sve_addr_ri_s6xvl): Likewise. (aarch64_ext_sve_addr_ri_s9xvl): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (SHIFTED_NONE, SHIFTED_MUL_VL): New parse_shift_modes. (parse_shift): Handle SHIFTED_MUL_VL. (parse_address_main): Add an imm_shift_mode parameter. (parse_address, parse_sve_address): Update accordingly. (parse_operands): Handle MUL VL addressing modes.	10 years ago
Richard Sandiford	4df068de52	[AArch64][SVE 25/32] Add support for SVE addressing modes This patch adds most of the new SVE addressing modes and associated operands. A follow-on patch adds MUL VL, since handling it separately makes the changes easier to read. The patch also introduces a new "operand-dependent data" field to the operand flags, based closely on the existing one for opcode flags. For SVE this new field needs only 2 bits, but it could be widened in future if necessary. include/ * opcode/aarch64.h (AARCH64_OPND_SVE_ADDR_RI_U6): New aarch64_opnd. (AARCH64_OPND_SVE_ADDR_RI_U6x2, AARCH64_OPND_SVE_ADDR_RI_U6x4) (AARCH64_OPND_SVE_ADDR_RI_U6x8, AARCH64_OPND_SVE_ADDR_RR) (AARCH64_OPND_SVE_ADDR_RR_LSL1, AARCH64_OPND_SVE_ADDR_RR_LSL2) (AARCH64_OPND_SVE_ADDR_RR_LSL3, AARCH64_OPND_SVE_ADDR_RX) (AARCH64_OPND_SVE_ADDR_RX_LSL1, AARCH64_OPND_SVE_ADDR_RX_LSL2) (AARCH64_OPND_SVE_ADDR_RX_LSL3, AARCH64_OPND_SVE_ADDR_RZ) (AARCH64_OPND_SVE_ADDR_RZ_LSL1, AARCH64_OPND_SVE_ADDR_RZ_LSL2) (AARCH64_OPND_SVE_ADDR_RZ_LSL3, AARCH64_OPND_SVE_ADDR_RZ_XTW_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW_22, AARCH64_OPND_SVE_ADDR_RZ_XTW1_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW1_22, AARCH64_OPND_SVE_ADDR_RZ_XTW2_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW2_22, AARCH64_OPND_SVE_ADDR_RZ_XTW3_14) (AARCH64_OPND_SVE_ADDR_RZ_XTW3_22, AARCH64_OPND_SVE_ADDR_ZI_U5) (AARCH64_OPND_SVE_ADDR_ZI_U5x2, AARCH64_OPND_SVE_ADDR_ZI_U5x4) (AARCH64_OPND_SVE_ADDR_ZI_U5x8, AARCH64_OPND_SVE_ADDR_ZZ_LSL) (AARCH64_OPND_SVE_ADDR_ZZ_SXTW, AARCH64_OPND_SVE_ADDR_ZZ_UXTW): Likewise. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for the new SVE address operands. * aarch64-opc.h (FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14) (FLD_SVE_xs_22): New aarch64_field_kinds. (OPD_F_OD_MASK, OPD_F_OD_LSB, OPD_F_NO_ZR): New flags. (get_operand_specific_data): New function. * aarch64-opc.c (fields): Add entries for FLD_SVE_imm6, FLD_SVE_msz, FLD_SVE_xs_14 and FLD_SVE_xs_22. (operand_general_constraint_met_p): Handle the new SVE address operands. (sve_reg): New array. (get_addr_sve_reg_name): New function. (aarch64_print_operand): Handle the new SVE address operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_addr_ri_u6, ins_sve_addr_rr_lsl) (ins_sve_addr_rz_xtw, ins_sve_addr_zi_u5, ins_sve_addr_zz_lsl) (ins_sve_addr_zz_sxtw, ins_sve_addr_zz_uxtw): New inserters. * aarch64-asm.c (aarch64_ins_sve_addr_ri_u6): New function. (aarch64_ins_sve_addr_rr_lsl): Likewise. (aarch64_ins_sve_addr_rz_xtw): Likewise. (aarch64_ins_sve_addr_zi_u5): Likewise. (aarch64_ins_sve_addr_zz): Likewise. (aarch64_ins_sve_addr_zz_lsl): Likewise. (aarch64_ins_sve_addr_zz_sxtw): Likewise. (aarch64_ins_sve_addr_zz_uxtw): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_addr_ri_u6, ext_sve_addr_rr_lsl) (ext_sve_addr_rz_xtw, ext_sve_addr_zi_u5, ext_sve_addr_zz_lsl) (ext_sve_addr_zz_sxtw, ext_sve_addr_zz_uxtw): New extractors. * aarch64-dis.c (aarch64_ext_sve_add_reg_imm): New function. (aarch64_ext_sve_addr_ri_u6): Likewise. (aarch64_ext_sve_addr_rr_lsl): Likewise. (aarch64_ext_sve_addr_rz_xtw): Likewise. (aarch64_ext_sve_addr_zi_u5): Likewise. (aarch64_ext_sve_addr_zz): Likewise. (aarch64_ext_sve_addr_zz_lsl): Likewise. (aarch64_ext_sve_addr_zz_sxtw): Likewise. (aarch64_ext_sve_addr_zz_uxtw): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (REG_TYPE_SVE_BASE, REG_TYPE_SVE_OFFSET): New register types. (get_reg_expected_msg): Handle them. (aarch64_addr_reg_parse): New function, split out from aarch64_reg_parse_32_64. Handle Z registers too. (aarch64_reg_parse_32_64): Call it. (parse_address_main): Add base_qualifier, offset_qualifier, base_type and offset_type parameters. Handle SVE base and offset registers. (parse_address): Update call to parse_address_main. (parse_sve_address): New function. (parse_operands): Parse the new SVE address operands.	10 years ago
Richard Sandiford	2442d8466e	[AArch64][SVE 24/32] Add AARCH64_OPND_SVE_PATTERN_SCALED Some SVE instructions count the number of elements in a given vector pattern and allow a scale factor of [1, 16] to be applied to the result. This scale factor is written ", MUL #n", where "MUL" is a new operator. E.g.: UQINCD X0, POW2, MUL #2 This patch adds support for this kind of operand. All existing operators were shifts of some kind, so there was a natural range of [0, 63] regardless of context. This was then narrowered further by later checks (e.g. to [0, 31] when used for 32-bit values). In contrast, MUL doesn't really have a natural context-independent range. Rather than pick one arbitrarily, it seemed better to make the "shift" amount a full 64-bit value and leave the range test to the usual operand-checking code. I've rearranged the fields of aarch64_opnd_info so that this doesn't increase the size of the structure (although I don't think its size is critical anyway). include/ * opcode/aarch64.h (AARCH64_OPND_SVE_PATTERN_SCALED): New aarch64_opnd. (AARCH64_MOD_MUL): New aarch64_modifier_kind. (aarch64_opnd_info): Make shifter.amount an int64_t and rearrange the fields. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add an entry for AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc.h (FLD_SVE_imm4): New aarch64_field_kind. * aarch64-opc.c (fields): Add a corresponding entry. (set_multiplier_out_of_range_error): New function. (aarch64_operand_modifiers): Add entry for AARCH64_MOD_MUL. (operand_general_constraint_met_p): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (print_register_offset_address): Use PRIi64 to print the shift amount. (aarch64_print_operand): Likewise. Handle AARCH64_OPND_SVE_PATTERN_SCALED. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_scale): New inserter. * aarch64-asm.c (aarch64_ins_sve_scale): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_scale): New inserter. * aarch64-dis.c (aarch64_ext_sve_scale): New function. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (SHIFTED_MUL): New parse_shift_mode. (parse_shift): Handle it. Reject AARCH64_MOD_MUL for all other shift modes. Skip range tests for AARCH64_MOD_MUL. (process_omitted_operand): Handle AARCH64_OPND_SVE_PATTERN_SCALED. (parse_operands): Likewise.	10 years ago
Richard Sandiford	f11ad6bc0f	[AArch64][SVE 21/32] Add Zn and Pn registers This patch adds the Zn and Pn registers, and associated fields and operands. include/ * opcode/aarch64.h (AARCH64_OPND_CLASS_SVE_REG): New aarch64_operand_class. (AARCH64_OPND_CLASS_PRED_REG): Likewise. (AARCH64_OPND_SVE_Pd, AARCH64_OPND_SVE_Pg3, AARCH64_OPND_SVE_Pg4_5) (AARCH64_OPND_SVE_Pg4_10, AARCH64_OPND_SVE_Pg4_16) (AARCH64_OPND_SVE_Pm, AARCH64_OPND_SVE_Pn, AARCH64_OPND_SVE_Pt) (AARCH64_OPND_SVE_Za_5, AARCH64_OPND_SVE_Za_16, AARCH64_OPND_SVE_Zd) (AARCH64_OPND_SVE_Zm_5, AARCH64_OPND_SVE_Zm_16, AARCH64_OPND_SVE_Zn) (AARCH64_OPND_SVE_Zn_INDEX, AARCH64_OPND_SVE_ZnxN) (AARCH64_OPND_SVE_Zt, AARCH64_OPND_SVE_ZtxN): New aarch64_opnds. opcodes/ * aarch64-tbl.h (AARCH64_OPERANDS): Add entries for new SVE operands. * aarch64-opc.h (FLD_SVE_Pd, FLD_SVE_Pg3, FLD_SVE_Pg4_5) (FLD_SVE_Pg4_10, FLD_SVE_Pg4_16, FLD_SVE_Pm, FLD_SVE_Pn, FLD_SVE_Pt) (FLD_SVE_Za_5, FLD_SVE_Za_16, FLD_SVE_Zd, FLD_SVE_Zm_5, FLD_SVE_Zm_16) (FLD_SVE_Zn, FLD_SVE_Zt, FLD_SVE_tzsh): New aarch64_field_kinds. * aarch64-opc.c (fields): Add corresponding entries here. (operand_general_constraint_met_p): Check that SVE register lists have the correct length. Check the ranges of SVE index registers. Check for cases where p8-p15 are used in 3-bit predicate fields. (aarch64_print_operand): Handle the new SVE operands. * aarch64-opc-2.c: Regenerate. * aarch64-asm.h (ins_sve_index, ins_sve_reglist): New inserters. * aarch64-asm.c (aarch64_ins_sve_index): New function. (aarch64_ins_sve_reglist): Likewise. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_sve_index, ext_sve_reglist): New extractors. * aarch64-dis.c (aarch64_ext_sve_index): New function. (aarch64_ext_sve_reglist): Likewise. * aarch64-dis-2.c: Regenerate. gas/ * config/tc-aarch64.c (NTA_HASVARWIDTH): New macro. (AARCH64_REG_TYPES): Add ZN and PN. (get_reg_expected_msg): Handle them. (parse_vector_type_for_operand): Add a reg_type parameter. Skip the width for Zn and Pn registers. (parse_typed_reg): Extend vector handling to Zn and Pn. Update the call to parse_vector_type_for_operand. Set HASVARTYPE for Zn and Pn, expecting the width to be 0. (parse_vector_reg_list): Restrict error about [BHSD]nn operands to REG_TYPE_VN. (vectype_to_qualifier): Use S_[BHSD] qualifiers for NTA_HASVARWIDTH. (parse_operands): Handle the new Zn and Pn operands. (REGSET16): New macro, split out from... (REGSET31): ...here. (reg_names): Add Zn and Pn entries.	10 years ago
Richard Sandiford	aa2aa4c694	[AArch64][SVE 16/32] Use specific insert/extract methods for fpimm FPIMM used the normal "imm" insert/extract methods, with a specific test for FPIMM in the extract method. SVE needs to use the same extractors, so rather than add extra checks for specific operand types, it seemed cleaner to use a separate insert/extract method. opcodes/ * aarch64-tbl.h (AARCH64_OPERNADS): Use fpimm rather than imm for FPIMM. * aarch64-asm.h (ins_fpimm): New inserter. * aarch64-asm.c (aarch64_ins_fpimm): New function. * aarch64-asm-2.c: Regenerate. * aarch64-dis.h (ext_fpimm): New extractor. * aarch64-dis.c (aarch64_ext_imm): Remove fpimm test. (aarch64_ext_fpimm): New function. * aarch64-dis-2.c: Regenerate.	10 years ago
Alan Modra	6f2750feaf	Copyright update for binutils	11 years ago
Matthew Wahab	9ed608f98b	[AArch64][Patch 4/5] Support HINT aliases taking operands. The Statistical Profile Extension adds the instruction PSB CSYNC as an alias for the HINT #17 instruction. This patch adds support for aliases of HINT which take an operand, adding a table to store operand names and their matching hint number as well as encoding and decoding functions for such operands. Parsing and printing the operands are deferred to any support added for aliases with such operands. include/opcode/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * aarch64.h (aarch64_hint_options): Declare. (aarch64_opnd_info): Add field hint_option. opcodes/ 2015-12-11 Matthew Wahab <matthew.wahab@arm.com> * aarch64-asm.c (aarch64_ins_hint): New. * aarch64-asm.h (aarch64_ins_hint): Declare. * aarch64-dis.c (aarch64_ext_hint): New. * aarch64-dis.h (aarch64_ext_hint): Declare. * aarch64-opc-2.c: Regenerate. * aarch64-opc.c (aarch64_hint_options): New. * aarch64-tbl.h (AARCH64_OPERANDS): Fix typos. Change-Id: I2205038fc1c47d3025d1f0bc2fbf405b5575b287	11 years ago
Alan Modra	b90efa5b79	ChangeLog rotatation and copyright year update	12 years ago
Alan Modra	4b95cf5c0c	Update copyright years	13 years ago
Nick Clifton	a06ea96464	Add support for 64-bit ARM architecture: AArch64	14 years ago

42 Commits (83c8b5eb334a77249e5b8f20ed891c227d8e42ae)