binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Alan Modra	514e58b726	Correct "Fix powerpc subis range" * ppc-opc.c (NSISIGNOPT): Use insert_nsi and extract_nsi.	10 years ago
Alan Modra	e43de63c8f	Fix powerpc subis range * ppc-opc.c: Formatting. (NSISIGNOPT): Define. (powerpc_opcodes <subis>): Use NSISIGNOPT.	10 years ago
Maciej W. Rozycki	1401d2fe67	MIPS/opcodes: Correct mixed MIPS16 and microMIPS disassembly Mixing MIPS16 and microMIPS code in a single binary isn't usually supported but GAS happily produces such code if requested. However it is not correctly disassembled even if a symbol table is available and function symbols are correctly anotated with the ISA mode. This is because the ELF-header global microMIPS ASE flag takes precedence over MIPS16 function annotation, causing them to be treated as regular MIPS code. Correct the problem by respecting function symbol anotation regardless of the ELF-header flag. binutils/ * testsuite/binutils-all/mips/mixed-mips16-micromips.d: New test. * testsuite/binutils-all/mips/mixed-mips16-micromips.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test. opcodes/ * mips-dis.c (is_compressed_mode_p): Add `micromips_p' operand, replacing references to `micromips_ase' throughout. (_print_insn_mips): Don't use file-level microMIPS annotation to determine the disassembly mode with the symbol table.	10 years ago
Peter Bergner	1178da445a	Accept valid one byte signed and unsigned values for the IMM8 operand. opcodes/ * ppc-opc.c (IMM8): Use PPC_OPERAND_SIGNOPT. gas/ * testsuite/gas/ppc/power9.d <xxspltib>: Add additional operand tests. * testsuite/gas/ppc/power9.s: Likewise.	10 years ago
Matthew Fortune	8f4f9071ad	Add MIPS32 DSPr3 support. bfd/ * elfxx-mips.c (print_mips_ases): Add DSPR3. binutils/ * readelf.c (print_mips_ases): Add DSPR3. gas/ * config/tc-mips.c (options): Add OPTION_DSPR3 and OPTION_NO_DSPR3. (md_longopts): Likewise. (md_show_usage): Add help for -mdspr3 and -mno-dspr3. (mips_ases): Define availability for DSPr3. (mips_ase_groups): Add ASE_DSPR3 to the DSP group. (mips_convert_ase_flags): Map ASE_DSPR3 to AFL_ASE_DSPR3. * doc/as.texinfo: Document -mdspr3, -mno-dspr3. Fix -mdspr2 formatting. * doc/c-mips.texi: Document -mdspr3, -mno-dspr3, .set dspr3 and .set nodspr3. Fix -mdspr2 formatting. * testsuite/gas/mips/mips32-dspr3.d: New file. * testsuite/gas/mips/mips32-dspr3.s: Likewise. * testsuite/gas/mips/mips.exp: Run mips32-dspr3 test. include/ * elf/mips.h (AFL_ASE_DSPR3): New macro. (AFL_ASE_MASK): Update to include AFL_ASE_DSPR3. * opcode/mips.h (ASE_DSPR3): New macro. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_DSPR3 to mips32r6 and mips64r6. * mips-opc.c (D34): New macro. (mips_builtin_opcodes): Define bposge32c for DSPr3.	12 years ago
Alexander Fomin	8bc526963e	Enable Intel RDPID instruction. This patch enables Intel RDPID instruction described in Intel64 and IA-32 Architectures Software Developer's Manual, April 2016. gas/ * config/tc-i386.c (cpu_arch): Add RDPID. * doc/c-i386.texi: Document RDPID. gas/testsuite/ * gas/i386/i386.exp: Run RDPID tests. * gas/i386/prefix.d: Adjust. * gas/i386/rdpid.s: New test. * gas/i386/rdpid.d: Ditto. * gas/i386/rdpid-intel.d: Ditto. * gas/i386/x86-64-rdpid.s: Ditto. * gas/i386/x86-64-rdpid.d: Ditto. * gas/i386/x86-64-rdpid-intel.d: Ditto. opcodes/ * i386-dis.c (prefix_table): Add RDPID instruction. * i386-gen.c (cpu_flag_init): Add RDPID flag. (cpu_flags): Add RDPID bitfield. * i386-opc.h (enum): Add RDPID element. (i386_cpu_flags): Add RDPID field. * i386-opc.tbl: Add RDPID instruction. * i386-init.h: Regenerate. * i386-tbl.h: Regenerate.	10 years ago
Thomas Preud'homme	39d911fc3c	Use getters/setters to access ARM branch type 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * elf32-arm.c (elf32_arm_size_stubs): Use new macros ARM_GET_SYM_BRANCH_TYPE and ARM_SET_SYM_BRANCH_TYPE to respectively get and set branch type of a symbol. (bfd_elf32_arm_process_before_allocation): Likewise. (elf32_arm_relocate_section): Likewise and fix identation along the way. (allocate_dynrelocs_for_symbol): Likewise. (elf32_arm_finish_dynamic_symbol): Likewise. (elf32_arm_swap_symbol_in): Likewise. (elf32_arm_swap_symbol_out): Likewise. gas/ * config/tc-arm.c (arm_adjust_symtab): Use ARM_SET_SYM_BRANCH_TYPE to set branch type of a symbol. gdb/ * arm-tdep.c (arm_elf_make_msymbol_special): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. include/ * arm.h (enum arm_st_branch_type): Add new ST_BRANCH_ENUM_SIZE enumerator. (NUM_ENUM_ARM_ST_BRANCH_TYPE_BITS): New macro. (ENUM_ARM_ST_BRANCH_TYPE_BITMASK): Likewise. (ARM_SYM_BRANCH_TYPE): Replace by ... (ARM_GET_SYM_BRANCH_TYPE): This and ... (ARM_SET_SYM_BRANCH_TYPE): This in two versions depending on whether BFD_ASSERT is defined or not. ld/ * emultempl/armelf.em (gld${EMULATION_NAME}_finish): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. opcodes/ * arm-dis.c (get_sym_code_type): Use ARM_GET_SYM_BRANCH_TYPE to get branch type of a symbol. (print_insn): Likewise.	10 years ago
Thomas Preud'homme	16a1fa25be	Add support for ARMv8-M security extensions instructions 2016-05-10 Thomas Preud'homme <thomas.preudhomme@arm.com> gas/ * config/tc-arm.c (arm_ext_m): Add feature bit ARM_EXT2_V8M_MAIN. (arm_ext_v8m_main): New feature set for bit ARM_EXT2_V8M_MAIN. (arm_ext_v8m_m_only): New feature set for instructions in ARMv8-M not shared with a non M profile architecture. (do_rn): New function. (known_t32_only_insn): Check opcode against arm_ext_v8m_m_only rather than arm_ext_v8m. (v7m_psrs): Add ARMv8-M security extensions new special registers. (insns): Add ARMv8-M Security Extensions instructions. (aeabi_set_public_attributes): Use arm_ext_v8m_m_only instead of arm_ext_v8m_m to decide the profile and the Thumb ISA. * testsuite/gas/arm/archv8m-cmse.s: New file. * testsuite/gas/arm/archv8m-cmse-main.s: Likewise.. * testsuite/gas/arm/archv8m-cmse-msr.s: Likewise. * testsuite/gas/arm/any-cmse.d: Likewise. * testsuite/gas/arm/any-cmse-main.d: Likewise. * testsuite/gas/arm/archv8m-cmse-base.d: Likewise. * testsuite/gas/arm/archv8m-cmse-msr-base.d: Likewise. * testsuite/gas/arm/archv8m-cmse-main-1.d: Likewise. * testsuite/gas/arm/archv8m-cmse-main-2.d: Likewise. * testsuite/gas/arm/archv8m-cmse-msr-main.d: Likewise. include/ * opcode/arm.h (ARM_EXT2_V8M_MAIN): new feature bit. (ARM_AEXT2_V8M_MAIN): New architecture extension feature set. (ARM_ARCH_V8M_MAIN): Use ARM_AEXT2_V8M_MAIN instead of ARM_AEXT2_V8M for the high core bits. opcodes/ * arm-dis.c (coprocessor_opcodes): Add entries for VFP ARMv8-M Mainline Security Extensions instructions. (thumb_opcodes): Add entries for narrow ARMv8-M Security Extensions instructions. (thumb32_opcodes): Add entries for wide ARMv8-M Security Extensions instructions. (psr_name): Add new MSP_NS and PSP_NS ARMv8-M Security Extensions special registers.	10 years ago
Jose E. Marchesi	d751b79ea6	opcodes,gas: sparc: fix mnemonic of faligndatai opcodes/ChangeLog: 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-opc.c (sparc_opcodes): Fix mnemonic of faligndatai. gas/ChangeLog: 2016-05-09 Jose E. Marchesi <jose.marchesi@oracle.com> * testsuite/gas/sparc/sparc5vis4.s: Fix mnemonic of faligndatai. * testsuite/gas/sparc/sparc5vis4.d: Likewise.	10 years ago
Alan Modra	6eb7d83039	Regenerate configure	10 years ago
Claudiu Zissulescu	945e0f82da	[ARC] Add SYNTAX_NOP and SYNTAX_1OP for extension instructions gas/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (syntaxclass): Add SYNTAX_NOP and SYNTAX_1OP. (arc_extinsn): Handle new introduced syntax. * testsuite/gas/arc/textinsn1op.d: New file. * testsuite/gas/arc/textinsn1op.s: Likewise. * doc/c-arc.texi: Document SYNTAX_NOP and SYNTAX_1OP. opcodes/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * arc-ext.c (dump_ARC_extmap): Handle SYNATX_NOP and SYNTAX_1OP. (arcExtMap_genOpcode): Likewise. * arc-opc.c (arg_32bit_rc): Define new variable. (arg_32bit_u6): Likewise. (arg_32bit_limm): Likewise. include/ 2016-05-03 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (ARC_SYNTAX_1OP): Declare (ARC_SYNTAX_NOP): Likewsie. (ARC_OP1_MUST_BE_IMM): Update defined value. (ARC_OP1_IMM_IMPLIED): Likewise. (arg_32bit_rc, arg_32bit_u6, arg_32bit_limm): Declare.	10 years ago
Szabolcs Nagy	20f55f3866	Fix generation of AArhc64 instruction table. * aarch64-gen.c (VERIFIER): Define. * aarch64-opc.c (VERIFIER): Define. (verify_ldpsw): Use static linkage. * aarch64-opc.h (verify_ldpsw): Remove. * aarch64-tbl.h: Use VERIFIER for verifiers.	10 years ago
Nick Clifton	4bd13cde17	Add support to AArch64 disassembler for verifying instructions. Add verifier for LDPSW. PR target/19722 opcodes * aarch64-dis.c (aarch64_opcode_decode): Run verifier if present. * aarch64-opc.c (verify_ldpsw): New function. * aarch64-opc.h (verify_ldpsw): New prototype. * aarch64-tbl.h: Add initialiser for verifier field. (LDPSW): Set verifier to verify_ldpsw. binutils* testsuite/binutils-all/aarch64/illegal.s: New test. * testsuite/binutils-all/aarch64/illegal.d: New test driver. include * opcode/aarch64.h (struct aarch64_opcode): Add verifier field.	10 years ago
H.J. Lu	c0f92bf943	Skip if size of bfd_vma is smaller than address size Disassembler won't work properly when size of bfd_vma is smaller than address size. PR binutils/19983 PR binutils/19984 * i386-dis.c (print_insn): Return -1 if size of bfd_vma is smaller than address size.	10 years ago
Trevor Saunders	e6c7cdec06	update many old style function definitions This includes regenerating a bunch of files in opcodes/ with trunk cgen. gprof/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * basic_blocks.c: Update old style function definitions. * cg_arcs.c: Likewise. * cg_print.c: Likewise. * gen-c-prog.awk: Likewise. * gmon_io.c: Likewise. * hertz.c: Likewise. * hist.c: Likewise. * sym_ids.c: Likewise. bfd/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * cache.c: Update old style function definitions. * elf32-m68k.c: Likewise. * elf64-mmix.c: Likewise. * stab-syms.c: Likewise. opcodes/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * alpha-dis.c: Regenerate. * crx-dis.c: Likewise. * disassemble.c: Likewise. * epiphany-opc.c: Likewise. * fr30-opc.c: Likewise. * frv-opc.c: Likewise. * ip2k-opc.c: Likewise. * iq2000-opc.c: Likewise. * lm32-opc.c: Likewise. * lm32-opinst.c: Likewise. * m32c-opc.c: Likewise. * m32r-opc.c: Likewise. * m32r-opinst.c: Likewise. * mep-opc.c: Likewise. * mt-opc.c: Likewise. * or1k-opc.c: Likewise. * or1k-opinst.c: Likewise. * tic80-opc.c: Likewise. * xc16x-opc.c: Likewise. * xstormy16-opc.c: Likewise. ld/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * emultempl/scoreelf.em: Likewise. binutils/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * resres.c: Likewise. gas/ChangeLog: 2016-04-20 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * cgen.c: Likewise. * config/tc-bfin.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-mep.c: Likewise. * config/tc-metag.c: Likewise. * config/tc-nios2.c: Likewise. * config/tc-rl78.c: Likewise.	10 years ago
Andrew Burgess	537aefaf18	opcodes/arc: Add yet more nps instructions Add some more arc/nps400 instructions and the associated operands. There's also a test added into the assembler. gas/ChangeLog: * testsuite/gas/arc/nps400-6.d: New file. * testsuite/gas/arc/nps400-6.s: New file. include/ChangeLog: * opcode/arc.h (MAX_INSN_ARGS): Increase 6 to 8. opcodes/ChangeLog: * arc-nps400-tbl.h: Add addb, subb, adcb, sbcb, andb, xorb, orb, fxorb, wxorb, shlb, shrb, notb, cntbb, div, mod, divm, and qcmp instructions. * arc-opc.c (insert_nps_bitop_size): Delete. (extract_nps_bitop_size): Delete. (MAKE_SRC_POS_INSERT_EXTRACT_FUNCS): Define, and use. (extract_nps_qcmp_m3): Define. (extract_nps_qcmp_m2): Define. (extract_nps_qcmp_m1): Define. (arc_flag_operands): Add F_NPS_SX, F_NPS_AR, F_NPS_AL. (arc_flag_classes): Add C_NPS_SX, C_NPS_AR_AL (arc_operands): Add NPS_SRC2_POS, NPS_SRC1_POS, NPS_ADDB_SIZE, NPS_ANDB_SIZE, NPS_FXORB_SIZ, NPS_WXORB_SIZ, NPS_R_XLDST, NPS_DIV_UIMM4, NPS_QCMP_SIZE, NPS_QCMP_M1, NPS_QCMP_M2, and NPS_QCMP_M3.	11 years ago
Andrew Burgess	c8f785f220	opcodes/arc: Add more nps instructions Add dctcp, dcip, dcet, and dcacl instructions. gas/ChangeLog: * testsuite/gas/arc/nps400-4.d: New file. * testsuite/gas/arc/nps400-4.s: New file. * testsuite/gas/arc/nps400-5.d: New file. * testsuite/gas/arc/nps400-5.s: New file. include/ChangeLog: * opcode/arc.h (insn_class_t): Add NET and ACL class. opcodes/ChangeLog: * arc-nps400-tbl.h: Add dctcp, dcip, dcet, and dcacl instructions.	11 years ago
H.J. Lu	6fd8e7c249	Regenerate Makefile.in/aclocal.m4 automake 1.11.6 bfd/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. binutils/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gas/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * doc/Makefile.in: Likewise. gold/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. * testsuite/Makefile.in: Likewise. gprof/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. ld/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise. opcodes/ * Makefile.in: Regenerated with automake 1.11.6. * aclocal.m4: Likewise.	10 years ago
Andrew Burgess	4b0c052e45	arc/nps400 : New cmem instructions and associated relocation Add support for arc/nps400 cmem instructions, these load and store instructions are hard-wired to access "0x57f00000 + 16-bit-offset". Supporting this relocation required some additions to the arc relocation handling in the bfd library, as well as the standard changes required to add a new relocation type. There's a test of the new instructions in the assembler, and a test of the relocation in the linker. bfd/ChangeLog: * reloc.c: Add BFD_RELOC_ARC_NPS_CMEM16 entry. * bfd-in2.h: Regenerate. * libbfd.h: Regenerate. * elf32-arc.c: Add 'opcode/arc.h' include. (struct arc_relocation_data): Add symbol_name. (arc_special_overflow_checks): New function. (arc_do_relocation): Use arc_special_overflow_checks, reindent as required, add an extra comment. (elf_arc_relocate_section): Setup symbol_name in reloc_data. gas/ChangeLog: * testsuite/gas/arc/nps400-3.d: New file. * testsuite/gas/arc/nps400-3.s: New file. include/ChangeLog: * elf/arc-reloc.def: Add ARC_NPS_CMEM16 reloc. * opcode/arc.h (NPS_CMEM_HIGH_VALUE): Define. ld/ChangeLog: * testsuite/ld-arc/arc.exp: New file. * testsuite/ld-arc/nps-1.s: New file. * testsuite/ld-arc/nps-1a.d: New file. * testsuite/ld-arc/nps-1b.d: New file. * testsuite/ld-arc/nps-1b.err: New file. opcodes/ChangeLog: * arc-nps400-tbl.h: Add xldb, xldw, xld, xstb, xstw, and xst instructions. * arc-opc.c (insert_nps_cmem_uimm16): New function. (extract_nps_cmem_uimm16): New function. (arc_operands): Add NPS_XLDST_UIMM16 operand.	11 years ago
Andrew Burgess	cb040366b3	opcodes/arc: Move instruction length logic to new function Move the logic that calculates the instruction length out to a new function. Restructure the code to make it simpler. opcodes/ChangeLog: * arc-dis.c (arc_insn_length): New function. (print_insn_arc): Use arc_insn_length, change insnLen to unsigned. (find_format): Change insnLen parameter to unsigned.	11 years ago
Nick Clifton	accc018020	Fix disassembly of the V850's LD.BU instruction. PR target/19937 opcode * v850-opc.c (v850_opcodes): Correct masks for long versions of the LD.B and LD.BU instructions. gas * testsuite/gas/v850/pr19937.s: New test. * testsuite/gas/v850/pr19937.d: New test control file. * testsuite/gas/v850/basic.exp: Run the new test.	10 years ago
Claudiu Zissulescu	f36e33dac1	Add support for .extCondCode, .extCoreRegister and .extAuxRegister. gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textauxregister.d: New file. * testsuite/gas/arc/textauxregister.s: Likewise. * testsuite/gas/arc/textcondcode.d: Likewise. * testsuite/gas/arc/textcondcode.s: Likewise. * testsuite/gas/arc/textcoreregister.d: Likewise. * testsuite/gas/arc/textcoreregister.s: Likewise. * testsuite/gas/arc/textpseudoop.d: Likewise. * testsuite/gas/arc/textpseudoop.s: Likewise. * testsuite/gas/arc/ld2.d: Update test. * testsuite/gas/arc/st.d: Likewise. * testsuite/gas/arc/taux.d: Likewise. * doc/c-arc.texi (ARC Directives): Add .extCondCode, .extCoreRegister and .extAuxRegister documentation. * config/tc-arc.c (arc_extcorereg): New function. (md_pseudo_table): Add .extCondCode, .extCoreRegister and .extAuxRegister pseudo-ops. (extRegister_t): New type. (ext_condcode, arc_aux_hash): New global variable. (find_opcode_match): Check for extensions. (preprocess_operands): Likewise. (md_begin): Add aux registers in a hash. (assemble_insn): Update use arc_flags member. (tokenize_extregister): New function. (create_extcore_section): Likewise. * config/tc-arc.h (MAX_FLAG_NAME_LENGHT): Increase to 10. (arc_flags): Delete code, add flgp. include/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (flag_class_t): Update. (ARC_OPCODE_NONE): Define. (ARC_OPCODE_ARCALL): Likewise. (ARC_OPCODE_ARCFPX): Likewise. (ARC_REGISTER_READONLY): Likewise. (ARC_REGISTER_WRITEONLY): Likewise. (ARC_REGISTER_NOSHORT_CUT): Likewise. (arc_aux_reg): Add cpu. opcodes/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-dis.c (find_format): Check for extension flags. (print_flags): New function. (print_insn_arc): Update for .extCondCode, .extCoreRegister and .extAuxRegister. * arc-ext.c (arcExtMap_coreRegName): Use LAST_EXTENSION_CORE_REGISTER. (arcExtMap_coreReadWrite): Likewise. (dump_ARC_extmap): Update printing. * arc-opc.c (arc_flag_classes): Add F_CLASS_EXTEND flag. (arc_aux_regs): Add cpu field. * arc-regs.h: Add cpu field, lower case name aux registers. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>	11 years ago
Claudiu Zissulescu	1c2e355e48	Update ARC instruction data-base. gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/noargs_a7.d: New file. * testsuite/gas/arc/noargs_a7.s: Likewise. * testsuite/gas/arc/noargs_hs.d: Likewise. * testsuite/gas/arc/noargs_hs.s: Likewise. opcode/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-tbl.h: Add rtsc, sleep with no arguments. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>	11 years ago
Claudiu Zissulescu	b99747aeed	Add support for .extInstruction pseudo-op. gas/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/textinsn-errors.d: New File. * testsuite/gas/arc/textinsn-errors.err: Likewise. * testsuite/gas/arc/textinsn-errors.s: Likewise. * testsuite/gas/arc/textinsn2op.d: Likewise. * testsuite/gas/arc/textinsn2op.s: Likewise. * testsuite/gas/arc/textinsn2op01.d: Likewise. * testsuite/gas/arc/textinsn2op01.s: Likewise. * testsuite/gas/arc/textinsn3op.d: Likewise. * testsuite/gas/arc/textinsn3op.s: Likewise. * doc/c-arc.texi (ARC Directives): Add .extInstruction documentation. * config/tc-arc.c (arcext_section): New variable. (arc_extinsn): New function. (md_pseudo_table): Add .extInstruction pseudo op. (attributes_t): New type. (suffixclass, syntaxclass, syntaxclassmod): New constant structures. (find_opcode_match): Remove arc_num_opcodes. (md_begin): Likewise. (tokenize_extinsn): New function. (arc_set_ext_seg): Likewise. (create_extinst_section): Likewise. include/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (arc_num_opcodes): Remove. (ARC_SYNTAX_3OP, ARC_SYNTAX_2OP, ARC_OP1_MUST_BE_IMM) (ARC_OP1_IMM_IMPLIED, ARC_SUFFIX_NONE, ARC_SUFFIX_COND) (ARC_SUFFIX_FLAG): Define. (flags_none, flags_f, flags_cc, flags_ccf): Declare. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. opcodes/ 2016-04-04 Claudiu Zissulescu <claziss@synopsys.com> * arc-opc.c (flags_none, flags_f, flags_cc, flags_ccf): Initialize. (arg_none, arg_32bit_rarbrc, arg_32bit_zarbrc, arg_32bit_rbrbrc) (arg_32bit_rarbu6, arg_32bit_zarbu6, arg_32bit_rbrbu6) (arg_32bit_rbrbs12, arg_32bit_ralimmrc, arg_32bit_rarblimm) (arg_32bit_zalimmrc, arg_32bit_zarblimm, arg_32bit_rbrblimm) (arg_32bit_ralimmu6, arg_32bit_zalimmu6, arg_32bit_zalimms12) (arg_32bit_ralimmlimm, arg_32bit_zalimmlimm, arg_32bit_rbrc) (arg_32bit_zarc, arg_32bit_rbu6, arg_32bit_zau6, arg_32bit_rblimm) (arg_32bit_zalimm, arg_32bit_limmrc, arg_32bit_limmu6) (arg_32bit_limms12, arg_32bit_limmlimm): Likewise. (arc_opcode arc_opcodes): Null terminate the array. (arc_num_opcodes): Remove. * arc-ext.h (INSERT_XOP): Define. (extInstruction_t): Likewise. (arcExtMap_instName): Delete. (arcExtMap_insn): New function. (arcExtMap_genOpcode): Likewise. * arc-ext.c (ExtInstruction): Remove. (create_map): Zero initialize instruction fields. (arcExtMap_instName): Remove. (arcExtMap_insn): New function. (dump_ARC_extmap): More info while debuging. (arcExtMap_genOpcode): New function. * arc-dis.c (find_format): New function. (print_insn_arc): Use find_format. (arc_get_disassembler): Enable dump_ARC_extmap only when debugging. Signed-off-by: Claudiu Zissulescu <claziss@synopsys.com>	11 years ago
Maciej W. Rozycki	92708ceca5	MIPS/opcodes: Fix undecoded MIPS16 extended instruction bit disassembly Correct the disassembly of hardware don't cares in MIPS16 extended instructions. Rather than e.g.: 0: f008 0231 addiu v0,sp,16433 4: f520 3260 sll v0,v1,-12 print: 0: f008 0231 addiu v0,sp,16401 4: f520 3260 sll v0,v1,20 respectively instead. opcodes/ * mips-dis.c (print_mips16_insn_arg): Mask unused extended instruction bits out. binutils/ * testsuite/binutils-all/mips/mips16-undecoded.d: New test. * testsuite/binutils-all/mips/mips16-undecoded.s: New test source. * testsuite/binutils-all/mips/mips.exp: Run the new test.	10 years ago
Andrew Burgess	a42a4f8400	arc/nps400: Add new instructions Add some new control instructions to the opcodes library, and a new test for these new instructions to the assembler. The new instructions use an instruction flag longer than any seen before (on arc), and so the max flag length is extended to accommodate this. gas/ChangeLog: * config/tc-arc.h (MAX_FLAG_NAME_LENGTH): Increase to 7. * testsuite/gas/arc/nps400-2.d: New file. * testsuite/gas/arc/nps400-2.s: New file. opcodes/ChangeLog: * arc-nps400-tbl.h: Add schd, sync, and hwschd instructions. * arc-opc.c (arc_flag_operands): Add new flags. (arc_flag_classes): Add new classes.	11 years ago
Andrew Burgess	1328504b28	gas/arc: Handle multiple arc_opcode chains for same mnemonic This commit completes support for having multiple instructions with the same mnemonic in non-contiguous blocks within the arc_opcodes table. The commit adds an iterator mechanism for the arc_opcode_hash_entry structure, which is then used in find_opcode_match to consider all arc_opcode entries with the same mnemonic, even when these instructions are stored in non-contiguous blocks. I extend the comment on the arc_opcodes table to discuss how entries within the table are organised, and to mention how instructions can be split into multiple groups if needed, but that the table is still searched in table order. There should be no user visible changes after this commit. gas/ChangeLog: * config/tc-arc.c (struct arc_opcode_hash_entry_iterator): New structure. (arc_opcode_hash_entry_iterator_init): New function. (arc_opcode_hash_entry_iterator_next): New function. (find_opcode_match): Iterate over all arc_opcode entries referenced by the arc_opcode_hash_entry passed in as a parameter. opcodes/ChangeLog: * arc-opc.c (arc_opcodes): Extend comment to discus table layout.	11 years ago
Andrew Burgess	820f03ffe0	arc/nps400: Add additional instructions Adds the movbi, decode1, fbset, fbclear, encode0, encode1, rflt, crc16, and crc32 instructions for the nps400 arc machine type. gas/ChangeLog: * testsuite/gas/arc/nps400-1.d: Update expected results. * testsuite/gas/arc/nps400-1.s: Additional test cases. opcodes/ChangeLog: * arc-nps400-tbl.h: Add movbi, decode1, fbset, fbclear, encode0, encode1, rflt, crc16, and crc32 instructions. * arc-opc.c (arc_flag_operands): Add F_NPS_R. (arc_flag_classes): Add C_NPS_R. (insert_nps_bitop_size_2b): New function. (extract_nps_bitop_size_2b): Likewise. (insert_nps_bitop_uimm8): Likewise. (extract_nps_bitop_uimm8): Likewise. (arc_operands): Add new operand entries.	11 years ago
Claudiu Zissulescu	8ddf6b2a13	[ARC] Fix support for double assist instructions. opcodes/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * arc-regs.h: Add a new subclass field. Add double assist accumulator register values. * arc-tbl.h: Use DPA subclass to mark the double assist instructions. Use DPX/SPX subclas to mark the FPX instructions. * arc-opc.c (RSP): Define instead of SP. (arc_aux_regs): Add the subclass field. include/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (DPA, DPX, SPX): New subclass enums. (ARC_FPUDA): Define. (arc_aux_reg): Add new field. gas/ 2016-04-05 Claudiu Zissulescu <claziss@synopsys.com> * config/tc-arc.c (is_code_density_p): Compare directly the subclass field. (is_spfp_p, is_dpfp_p, is_spfp_p): Define. (check_cpu_feature): New function. (find_opcode_match): Use check_cpu_feature function. (preprocess_operands): Likewise. (md_parse_option): Use mfpuda, mdpfp, mspfp options. * testsuite/gas/arc/tdpfp.d: New file. * testsuite/gas/arc/tfpuda.d: Likewise. * testsuite/gas/arc/tfpx.s: Likewise.	11 years ago
Jiong Wang	589a7d8830	[ARM] Add ARMv8.2 FP16 vmul/vmla/vmls (by scalar) gas/ * config/tc-arm.c (do_neon_mac_maybe_scalar): Allow F16. * testsuite/gas/arm/armv8-2-fp16-simd.s: New tests. * testsuite/gas/arm/armv8-2-fp16-simd.d: New expected results. * testsuite/gas/arm/armv8-2-fp16-simd-thum.d: Likewise for Thumb. * testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New warning results. * testsuite/gas/arm/simd_by_scalar_low_regbank.s: New test source. * testsuite/gas/arm/simd_by_scalar_low_regbank.d: New testcase. * testsuite/gas/arm/simd_by_scalar_low_regbank_thumb.d: Likewise for Thumb. * testsuite/gas/arm/simd_by_scalar_low_regbank.l: New warning results. opcodes/ * arm-dis.c: Support FP16 vmul, vmla, vmls (by scalar).	11 years ago
Andrew Burgess	0a191de984	opcodes: Fix date in ChangeLog entry Previous commit had wrong date on ChangeLog entry. Fixed.	11 years ago
Andrew Burgess	2cce10e718	opcodes/arc/nps: Fix some operand flags Some operands accidentally had the ARC_OPERAND_NCHK flag (due to copy & paste mistake), meaning the operand value was skipping the overflow check before being inserted. This commit removes the unwanted flags. opcodes/ChangeLog: * arc-opc.c (arc_operands): Fix operand flags for NPS_R_DST, and NPS_R_SRC1.	11 years ago
Trevor Saunders	6757cf5769	enable -Wwrite-strings for gas We add a new AC_SUBST to warning.m4 so that the test if the warning is supported is centralized, but the warning can be enabled per directory. binutils/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. gprof/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. ld/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. opcodes/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. bfd/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. * warning.m4: Add WARN_WRITE_STRINGS AC_SUBST. gold/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * configure: Regenerate. gas/ChangeLog: 2016-03-31 Trevor Saunders <tbsaunde+binutils@tbsaunde.org> * Makefile.am: Add WARN_WRITE_STRINGS to WARN_CFLAGS. * Makefile.in: Regenerate. * configure: Likewise.	11 years ago
Andrew Burgess	0a106562e3	opcodes/arc: Comment and whitespace fixes in opcode table Add a new comment, and clean up some whitespace issues in the instruction table. opcode/ChangeLog: * arc-nps400-tbl.h: Add a header comment, and fix some whitespace issues. No functional changes.	11 years ago
Claudiu Zissulescu	bd05ac5f5e	[ARC] Cleanup AUX register names. opcodes/ 2016-03-30 Claudiu Zissulescu <claziss@synopsys.com> * arc-regs.h (IC_RAM_ADDRESS, IC_TAG, IC_WP, IC_DATA, CONTROL0) (AX2, AY2, MX2, MY2, AY0, AY1, DC_RAM_ADDR, DC_TAG, CONTROL1) (RTT): Remove duplicate. (LCDINSTR, LCDDATA, LCDSTAT, CC_, PCT_COUNT, PCT_SNAP) (PCT_CONFIG): Remove. (D1L, D1H, D2H, D2L): Define.	11 years ago
Claudiu Zissulescu	9885948fc9	[ARC] Fix typo in extension instruction name. opcodes/ 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> * arc-ext-tbl.h (dsp_fp_i2flt): Fix typo.	11 years ago
Claudiu Zissulescu	f2dd88387a	[ARC] Add support for Quarkse opcodes. gas/ 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> * testsuite/gas/arc/ext2op.d: New file. * testsuite/gas/arc/ext2op.s: Likewise. * testsuite/gas/arc/ext3op.d: Likewise. * testsuite/gas/arc/ext3op.s: Likewise. opcodes/ 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> * arc-tbl.h (invld07): Remove. * arc-ext-tbl.h: New file. * arc-dis.c (FIELDA, FIELDB, FIELDC): Remove. * arc-opc.c (arc_opcodes): Add ext-tbl include. include/ 2016-03-29 Claudiu Zissulescu <claziss@synopsys.com> * opcode/arc.h (insn_subclass_t): Add QUARKSE subclass. (FIELDA, FIELDB, FIELDC, FIELDF, FIELDQ, INSN3OP, INSN2OP) (INSN2OP, INSN3OP_ABC, INSN3OP_ALC, INSN3OP_ABL, INSN3OP_ALL) (INSN3OP_0BC, INSN3OP_0LC, INSN3OP_0BL, INSN3OP_0LL, INSN3OP_ABU) (INSN3OP_ALU, INSN3OP_0BU, INSN3OP_0LU, INSN3OP_BBS, INSN3OP_0LS) (INSN3OP_CBBC, INSN3OP_CBBL, INSN3OP_C0LC, INSN3OP_C0LL) (INSN3OP_CBBU, INSN3OP_C0LU, MINSN3OP_ABC, MINSN3OP_ALC) (MINSN3OP_ABL, MINSN3OP_ALL, MINSN3OP_0BC, MINSN3OP_0LC) (MINSN3OP_0BL, MINSN3OP_0LL, MINSN3OP_ABU, MINSN3OP_ALU) (MINSN3OP_0BU, MINSN3OP_0LU, MINSN3OP_BBS, MINSN3OP_0LS) (MINSN3OP_CBBC, MINSN3OP_CBBL, MINSN3OP_C0LC, MINSN3OP_C0LL) (MINSN3OP_CBBU, MINSN3OP_C0LU, INSN2OP_BC, INSN2OP_BL, INSN2OP_0C) (INSN2OP_0L INSN2OP_BU, INSN2OP_0U, MINSN2OP_BC, MINSN2OP_BL) (MINSN2OP_0C, MINSN2OP_0L, MINSN2OP_BU, MINSN2OP_0U): Define.	11 years ago
Jan Kratochvil	0d2f91fe2d	More -Wstack-usage warnings: opcodes/aarch64-* opcodes Fix -Wstack-usage warnings. * aarch64-dis.c (print_operands): Substitute size. * aarch64-opc.c (print_register_offset_address): Substitute tblen.	11 years ago
Jose E. Marchesi	a6b71f422b	sparc: reorder wr instructions in sparc_opcodes to fix diagnostics This patch changes the location of several variants of the `wr' instruction in sparc_opcodes. This is to get the assembler to emit the right diagnostics when an invalid %asrN register is used in an instruction.	11 years ago
Nick Clifton	9780e04507	Add -Wstack-usage to the gcc warning flags list, but only if using a sufficiently recent version of gcc. bfd * warning.m4 (GCC_WARN_CFLAGS): Only add -Wstack-usage if using a sufficiently recent version of GCC. * configure: Regenerate. others * configure: Regenerate.	11 years ago
Andrew Burgess	e23e8ebee3	arc/nps400: Add first nps400 instructions Adds the first few nps400 instructions. gas/ChangeLog: * testsuite/gas/arc/nps400-0.d: New file. * testsuite/gas/arc/nps400-0.s: New file. * testsuite/gas/arc/nps400-1.d: New file. * testsuite/gas/arc/nps400-1.s: New file. include/ChangeLog: * opcodes/arc.h (insn_class_t): Add BITOP type. opcodes/ChangeLog: * arc-nps400-tbl.h: New file. * arc-opc.c: Add top level comment. (insert_nps_3bit_dst): New function. (extract_nps_3bit_dst): New function. (insert_nps_3bit_src2): New function. (extract_nps_3bit_src2): New function. (insert_nps_bitop_size): New function. (extract_nps_bitop_size): New function. (arc_flag_operands): Add nps400 entries. (arc_flag_classes): Add nps400 entries. (arc_operands): Add nps400 entries. (arc_opcodes): Add nps400 include.	11 years ago
Andrew Burgess	1ae8ab4714	arc/opcodes: Use flag operand class to handle multiple flag matches When parsing the operand instruction flags we don't currently detect the case where multiple flags are provided from the same class set, these will be accepted and the bit values merged together, resulting in the wrong instruction being assembled. For example: adc.n.eq r0,r0,r2 Will assemble without error, yet, upon disassembly, the instruction will actually be: adc.c r0,r0,r2 In a later commit the concept of required flags will be introduced. Required flags are just like normal instruction flags, except that they must be present for the instruction to match. Adding this will allow for simpler instructions in the instruction table, and allow for more sharing of operand extraction and insertion functions. To solve both of the above issues (multiple flags being invalid, and required flags), this commit reworks the flag class mechanism. Currently the flag class is never used. Each instruction can reference multiple flag classes, each flag class has a class type and a set of flags. However, at present, the class type is never used. The current values identify the type of instruction that the flag will be used in, but this is not required information. Instead, this commit discards the old flag classes, and introduces 3 new classes. The first F_CLASS_NONE, is just a NULL marker value, and is only used in the NULL marker flag class. The other two flag classes are F_FLAG_OPTIONAL, and F_FLAG_REQUIRED. The class F_FLAG_OPTIONAL has the property that at most one of the flags in the flag set for that class must be present in the instruction. The "at most" one means that no flags being present is fine. The class F_FLAG_REQUIRED is not currently used, but will be soon. With this class, exactly one of the flags from this class must be present in the instruction. If the flag class contains a single flag, then of course that flag must be present. However, if the flag class contained two or more, then one, and only one of them must be present. gas/ChangeLog: * config/tc-arc.c (find_opcode_match): Move lnflg, and i declarations to start of block. Reset code on all flags before attempting to match them. Handle multiple hits on the same flag. Handle flag class. * testsuite/gas/arc/asm-errors.d: New file. * testsuite/gas/arc/asm-errors.err: New file. * testsuite/gas/arc/asm-errors.s: New file. include/ChangeLog: * opcode/arc.h (flag_class_t): Remove all old flag classes, add 3 new classes instead. opcodes/ChangeLog: * arc-opc.c (arc_flag_classes): Convert all flag classes to use the new class enum values.	11 years ago
Andrew Burgess	8699fc3e88	arc: Add nps400 machine type, and assembler flag. This commit introduces the nps400 machine type as a variant of arc. There's a new flag in the assembler to select this machine type. All other changes are just adding handling of the new machine type into the relevant places. The nps400 is an arc700 variant with some vendor specific instructions added into the instruction set. This commit does not add any of the new instructions, this is just laying the groundwork for future commits. However, in preparation for these new instructions a new opcode define for nps400 has been added to include/opcode/arc.h, this new opcode define is used in the assembler and disassembler along with the existing define for arc700 such that when assembling and disassembling for nps400 the user will have access to all arc700 instructions and all the nps400 vendor extension instructions. bfd/ChangeLog: * archures.c (bfd_mach_arc_nps400): Define. * bfd-in2.h: Regenerate. * cpu-arc.c (arch_info_struct): New entry for nps400, renumber some existing entries to make space. * elf32-arc.c (arc_elf_object_p): Add nps400 case. (arc_elf_final_write_processing): Likewise. binutils/ChangeLog: * readelf.c (decode_ARC_machine_flags): Handle nps400. gas/ChangeLog: * config/tc-arc.c (cpu_types): Add nps400 entry. (check_zol): Handle nps400. include/ChangeLog: * elf/arc.h (E_ARC_MACH_NPS400): Define. * opcode/arc.h (ARC_OPCODE_NPS400): Define. opcodes/ChangeLog: * arc-dis.c (print_insn_arc): Handle nps400.	11 years ago
Andrew Burgess	24740d83e4	arc/gas: default mach is arc700, initialised in md_begin This commit restructures the selection of the default cpu/mach so that the choice is made from md_begin (if the user has not provided a command line choice). This will reduce the amount of change needed in a later patch. At the request of Synopsys, the default architecture changes to ARC700 from this commit, previously the default was a non-existent super-architecture that contained all instructions from all arc variants. There's some clean up associated with removing the default merged architecture, and a small test fix now that the default is ARC700. binutils/ChangeLog: * testsuite/binutils-all/objdump.exp (cpus_expected): Add ARC700 to the architecture list. gas/ChangeLog: * config/tc-arc.c (arc_target): Delay initialisation until arc_select_cpu. (arc_target_name): Likewise. (arc_features): Likewise. (arc_mach_type): Likewise. (cpu_types): Remove "all" entry. (arc_select_cpu): New function, most of the content is from... (md_parse_option): ... here. Call new arc_select_cpu. (md_begin): Call arc_select_cpu if needed, default is now arc700. include/ChangeLog: * opcode/arc.h (ARC_OPCODE_BASE): Delete. opcodes/ChangeLog: * arc-opc.c (BASE): Delete.	11 years ago
Nick Clifton	e1fa016350	Remove use of alloca. bfd * warning.m4 (GCC_WARN_CFLAGS): Add -Wstack-usage=262144 * configure: Regenerate. * elf32-m68hc1x.c (elf32_m68hc11_relocate_section): Replace use of alloca with call to xmalloc. * elf32-nds32.c: Likewise. * elf64-hppa.c: Likewise. * elfxx-mips.c: Likewise. * pef.c: Likewise. * pei-x86_64.c: Likewise. * som.c: Likewise. * xsym.c: Likewise. binutils * dlltool.c: Replace use of alloca with call to xmalloc. * dllwrap.c: Likewise. * nlmconv.c: Likewise. * objdump.c: Likewise. * resrc.c: Likewise. * winduni.c: Likewise. * configure: Regenerate. gas * atof-generic.c: Replace use of alloca with call to xmalloc. * cgen.c: Likewise. * dwarf2dbg.c: Likewise. * macro.c: Likewise. * remap.c: Likewise. * stabs.c: Likewise. * symbols.c: Likewise. * config/obj-elf.c: Likewise. * config/tc-aarch64.c: Likewise. * config/tc-arc.c: Likewise. * config/tc-arm.c: Likewise. * config/tc-avr.c: Likewise. * config/tc-ia64.c: Likewise. * config/tc-mips.c: Likewise. * config/tc-msp430.c: Likewise. * config/tc-nds32.c: Likewise. * config/tc-ppc.c: Likewise. * config/tc-sh.c: Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic54x.c: Likewise. * config/tc-xstormy16.c: Likewise. * config/te-vms.c: Likewise. * configure: Regenerate. ld * emultempl/msp430.em: Replace use of alloca with call to xmalloc. * plugin.c: Likewise. * pe-dll.c: Likewise.	11 years ago
Nick Clifton	8678914fcb	Fix the disassembly of the AArch64's OOR instruction as a MOV instruction. PR target/19721 opcodes * aarch64-tbl.h (aarch64_opcode_table): Fix type of second operand of MOV insn that aliases an ORR insn. gas * testsuite/gas/aarch64/pr19721.s: New test source file. * testsuite/gas/aarch64/pr19721.d: New test driver file.	11 years ago
Jiong Wang	cc93330137	[ARM] Support ARMv8.2 FP16 simd instructions gas/ * config/tc-arm.c (N_S_32): New. (N_F_16_32): Likewise. (N_SUF_32): Support N_F16. (N_IF_32): Likewise. (neon_dyadic_misc): Likewise. (do_neon_cmp): Likewise. (do_neon_cmp_inv): Likewise. (do_neon_mul): Likewise. (do_neon_fcmp_absolute): Likewise. (do_neon_step): Likewise. (do_neon_abs_neg): Likewise. (CVT_FLAVOR_VAR): Likewise. (do_neon_cvt_1): Likewise. (do_neon_recip_est): Likewise. (do_vmaxnm): Likewise. (do_vrint_1): Likewise. (neon_check_type): Check architecture support for FP16 extension. (insns): Update comments. * testsuite/gas/arm/armv8-2-fp16-simd.s: New test source. * testsuite/gas/arm/armv8-2-fp16-simd.d: New testcase for arm mode. * testsuite/gas/arm/armv8-2-fp16-simd-thumb.d: Likewise for thumb mode. * testsuite/gas/arm/armv8-2-fp16-simd-warning.d: New rejection test for arm mode. * testsuite/gas/arm/armv8-2-fp16-simd-warning-thumb.d: Likewise for thumb mode. * testsuite/gas/arm/armv8-2-fp16-simd-warning.l: New expected rejection error file. opcode/ * arm-dis.c (neon_opcodes): Support new FP16 instructions.	11 years ago
Trevor Saunders	f86f586366	Add const qualifiers at various places. opcodes * mcore-opc.h: Add const qualifiers. * microblaze-opc.h (struct op_code_struct): Likewise. * sh-opc.h: Likewise. * tic4x-dis.c (tic4x_print_indirect): Likewise. (tic4x_print_op): Likewise. include * opcode/dlx.h (struct dlx_opcode): Add const qualifiers. * opcode/h8300.h (struct h8_opcode): Likewise. * opcode/hppa.h (struct pa_opcode): Likewise. * opcode/msp430.h: Likewise. * opcode/spu.h (struct spu_opcode): Likewise. * opcode/tic30.h (struct _register): Likewise. * opcode/tic4x.h (struct tic4x_register): Likewise. (struct tic4x_cond): Likewise. (struct tic4x_indirect): Likewise. (struct tic4x_inst): Likewise. * opcode/visium.h (struct reg_entry): Likewise. gas * config/tc-arc.c: Add const qualifiers. * config/tc-h8300.c (md_begin): Likewise. * config/tc-ia64.c (print_prmask): Likewise. * config/tc-msp430.c (msp430_operands): Likewise. * config/tc-nds32.c (struct suffix_name): Likewise. (struct nds32_parse_option_table): Likewise. (struct nds32_set_option_table): Likewise. (do_pseudo_pushpopm): Likewise. (do_pseudo_pushpop_stack): Likewise. (nds32_relax_relocs): Likewise. (nds32_flag): Likewise. (struct nds32_hint_map): Likewise. (nds32_find_reloc_table): Likewise. (nds32_match_hint_insn): Likewise. * config/tc-s390.c: Likewise. * config/tc-sh.c (get_specific): Likewise. * config/tc-tic30.c: Likewise. * config/tc-tic4x.c (tic4x_inst_add): Likewise. (tic4x_indirect_parse): Likewise. * config/tc-vax.c (vax_cons): Likewise. * config/tc-z80.c (struct reg_entry): Likewise. * config/tc-epiphany.c (md_assemble): Adjust. (epiphany_assemble): New function. (epiphany_elf_section_rtn): Call do_align directly. (epiphany_elf_section_text): Likewise. * config/tc-ip2k.c (ip2k_elf_section_rtn): Likewise. (ip2k_elf_section_text): Likewise. * read.c (do_align): Make it not static. * read.h (do_align): New prototype.	11 years ago
Alan Modra	d11698cd0d	Regenerate or1k opcodes file CGEN patch now committed upstream to use hex numbers for large enums. * or1k-desc.h: Regenerate.	11 years ago
Alan Modra	c697cf0b2b	Regenerate rl78 opcodes file For newer comments. * rl78-decode.c: Regenerate.	11 years ago

1 2 3 4 5 ...

2468 Commits (7d4d970973c4735dcdd2a69d645309f167a1d9d4)