(struct ser_console_state, struct net_windows_state): Add exit_select,
have_stopped, thread.
(pipe_select_thread, console_select_thread)
(net_windows_select_thread): Don't create a local state copy or
close stop_select. Exit on exit_select instead of stop_select. Set
have_stopped.
(console_select_thread): Don't report control keypresses as pending
input.
(pipe_select_thread): Allow stop_select to interrupt sleeping.
(set_console_wait_handle): Create exit_select and have_stopped.
Save the thread handle. Check _kbhit before starting a thread.
(ser_console_done_wait_handle): New.
(ser_console_close): Close new handles. Wait for the thread to
exit.
(new_windows_select_thread): Assert that an event occurred.
(net_windows_wait_handle): Check for pending input before starting
a thread.
(net_windows_done_wait_handle): New.
(net_windows_open): Create exit_select and have_stopped.
Save the thread handle.
(net_windows_close): Close new handles. Wait for the thread to
exit.
(_intiialize_ser_windows): Register done_wait_handle methods.
* serial.c [USE_WIN32API] (serial_done_wait_handle): New.
* serial.h [USE_WIN32API] (struct serial_ops): Add done_wait_handle.
[USE_WIN32API] (serial_done_wait_handle): New prototype.
* mingw-hdep.c (gdb_select): Use serial_done_wait_handle.
2006-04-11 Jim Blandy <jimb@codesourcery.com>
* serial.c (serial_open): Check for special cases at the front of
the "device" name before scanning for the ':' that would indicate
an IP-based connection.
* Makefile.in (gdb_select_h, ser_tcp_h): New.
(ALLDEPFILES): Add ser-mingw.c.
(event-loop.o, inflow.o, mingw-hdep.o, posix-hdep.o, ser-base.o)
(ser-tcp.o, ser-unix.o): Update.
(ser-mingw.o): New rule.
* configure: Regenerated.
* configure.ac: Add ser-mingw.o for mingw32.
* ser-mingw.c: New file.
* event-loop.c: Include "gdb_select.h".
(gdb_select): Remove, moved to mingw-hdep.c and posix-hdep.c.
* ser-base.c: Include "gdb_select.h".
(ser_base_wait_for): Use gdb_select.
* serial.c (serial_for_fd): New function.
(serial_fdopen): Try "terminal" before "hardwire". Initialize
the allocated struct serial.
(serial_wait_handle): New function.
* serial.h (serial_for_fd, serial_wait_handle): New prototypes.
(struct serial_ops) [USE_WIN32API]: Add wait_handle.
* gdb_select.h: New file.
* ser-tcp.c: Include "ser-tcp.h". Remove unused "ser-unix.h" include.
(net_close, net_read_prim, net_write_prim): Make global.
(net_open): Likewise. Pass an exception set to select. Whitespace fix.
Document why we can not use gdb_select.
(_initialize_ser_tcp) [USE_WIN32API]: Do not register TCP support here.
* ser-tcp.h: New file.
* inflow.c (gdb_has_a_terminal): Don't initialize stdin_serial here.
(handle_sigio): Use gdb_select.
(initialize_stdin_serial): New function.
* terminal.h (initialize_stdin_serial): New prototype.
* top.c (gdb_init): Call initialize_stdin_serial.
* mingw-hdep.c (gdb_select): New function, moved from gdb_select in
event-loop.c. Add exception condition support. Use serial_for_fd
and serial_wait_handle. Fix timeout handling.
* posix-hdep.c: Include "gdb_select.h".
(gdb_select): New function.
* remote-st.c (connect_command): Use gdb_select.
* ser-unix.c: Include "gdb_select.h".
(hardwire_send_break, wait_for): Use gdb_select.
* serial.c (_initialize_serial): Add a description of
"set remotelogbase".
* command.c (do_setshow_command): If no arguments are supplied,
don't dump core, instead print out an error message.
Changes to OCD support to support wiggler box as well as
target boxes:
* ocd.c: change speed in init command to 0 from 80,
add (temporary) logging commands to help debugging,
(ocd_open): if "target ocd wiggler lpt" then use special
ser-ocd.c serial interface which communicates with Wigglers.dll,
otherwise do as we did before
(ocd_get_packet): add OCD_LOG_FILE and OCD_SET_CONNECTION to
switch of known commands of len 0
* ocd.h: add OCD_LOG_FILE
* serial.c (serial_open): do serial_interface_lookup on ocd
in the case of ocd
* ser-ocd.c: add buffer to contain responses from sending a
command to the Wigglers.dll.
(ocd_readchar): return curr char from buffer and increment ptr
(ocd_write): send buffer to Wigglers.dll, storing response in
return buffer and initializing curr location ptr to start of
buffer.
that directory.
* defs.h utils.c (error warning): Make message be const.
* main.c (fputs_unfiltered): Only send gdb_stdout and gdb_stderr
to hook. Otherwise send it to fputs.
* monitor.c monitor.h (monitor_get_dev_name): New function. Does
the obvious.
* remote-e7000.c: Remove debugify stuff. Change printf, fprintf
to _filtered forms to make output appear in GUIs. Replace all
uses of SERIAL_READCHAR with readchar, which has better error
checking.
* (e7000_parse_device): Add prototype.
* (readchar): Improve doc. Handle random serial errors.
* (expect): Disable notice_quit code. It's busted. Remove
serial error handling (it's now handled in readchar). Remove
remote_debug echoing. That's handled in readchar as well.
* (e7000_parse_device): Remove serial_flag arg. It's not
necessary.
* (e7000_open): Split into two pieces. Second part is
e7000_start_remote, and is error protected. Now, when we connect
to the target, we setup the initial frame and registers so that
the user gets an immediate indication of where the target is.
* (gch): Remove debug output. That's handled by readchar.
* (e7000_read_inferior_memory): Handle errors better.
* (_initialize_remote_e7000): Get rid of `<xxx>' things from
command names. They show up when doing completion and confuse
things horribly.
* ser-e7kpc.c: Remove the last seven months of brain damage. Get
rid of the DLL's since we can access the device directly from Win32s
and Win95. Get rid of debugify crud.
* serial.c: Remove debugify cruft.
* (serial_logchar serial_log_command serial_write serial_readchar
serial_send_break serial_close): Merge common functionality into
serial_logchar. Clean up rest of routines.
* sparclet-rom.c: Disembowel. Leave only download routine.
Download routine now switches to remote target automatically.
* top.c (disconnect): Only define if SIGHUP is defined. Cleans
up MSVC/Win32 problem.
* utils.c (gdb_flush): Don't call hook unless it's for gdb_stdout
or gdb_stderr.
* config/sh/tm-sh.h: Define TARGET_SH for WinGDB.
* config/sparc/tm-sparclet.h: Remove override for prompt.
Add prototypes for make_final_cleanup (and the other cleanup
routines.
* remote-e7000.c: Fix sync code to timeout if unable to sync.
Change sync code to report status while trying to sync-up
with hardware. Add debugging output and document.
* ser-e7kpc.c: Swap order of len & offset to match implementation.
Add debugging output and document.
* serial.c: Add debugging output.
* top.c: Add call to do_final_cleanups.
Remove conditionals preventing Win32 from getting SIGQUIT.
* utils.c: (*_cleanup): Modify cleanup routines to accept a cleanup
chain as a parameter. Extract this generic code from the cleanup
routines into separate funtions (*_my_cleanup). Keep old
functionality by passing "cleanup_chain" to the new funtions.
Define the cleanup chain "final_cleanup_chain" to be a cleanup
chain which will be executed only when gdb exits. Add functions
(*_final_cleanup) to match the original (*_cleanup) functions.
(pollquit, quit, notice_quit): Fix to read cntl-C from the
Windows message queue.
mswin/libwingdb.a and remote-wiggler.o.
* breakpoint.c (breakpoint_here_p): Clean up bp enabled test.
* (breakpoint_inserted_here_p): New func, just like
breakpoint_here_p, except it's honest. Honestly.
* breakpoint.h: Proto for above.
start-sanitize-gdbtk
* configure configure.in: Add host *windows* to list of hosts
that don't support GDBtk.
end-sanitize-gdbtk
* configure configure.in: Add mswin to configdirs if host is
i[3456]86-*-windows.
* core-aout.c (fetch_core_registers register_addr) gdbcore.h:
Change all vars that can contain addresses to type CORE_ADDR.
* findvar.c (supply_register): Allow val to be NULL. This means
that regno is unsupported.
* (read_pc read_pc_pid write_pc write_pc_pid): Make non-pid forms
just call pid forms with inferior_pid so that there's only once
place to hack PC's and such.
* infrun.c (proceed): Don't skip breakpoints if user changed PC.
* remote-wiggler.c: New file. Support for BDM interface from
Macraigor Systems.
* serial.c: Enhance serial logging capability. Add hex and octal
output modes (set remotelogbase {hex|octal|ascii}. Also log
breaks, timeouts, errors, and eofs.
* serial.h: Redefine SERIAL_SEND_BREAK to go through a wrapper
function so that we can log breaks. Don't export serial_logfile
or serial_logfp.
* top.c (execute_command): Don't test for serial_logfp here.
Just call serial_log_comand, and let serial.c sort it out.
* valops.c (value_of_variable): Don't attempt to establish frames
for static and global variables. This makes things work a bit
better if the stack or frame pointer is trashed.
* config/m68k/monitor.mt (TDEPFILES): Add remote-wiggler.o.
* config/m68k/tm-m68k.h: Define STACK_ALIGN. CPU32 can't hack
misaligned stacks during function calls.
* config.in: Regenerate with autoheader.
* configure: Regenerate with autoconf.
* inflow.c (_initialize_inflow): Only try to use _SC_JOB_CONTROL
if it is actually defined.
(gdb_setpgid): Use HAVE_SETPGID.
* ch-exp.c: Change include of <string.h> to "gdb_string.h".
* c-exp.y: Ditto.
* f-exp.y: Ditto.
* m2-exp.y: Ditto.
* c-exp.y: Include <ctype.h>.
* serial.c: Ditto.
* config/m68k/nm-news.h: Add typedef for pid_t which is
apparently missing from <sys/types.h>. Enclose entire
file in NM_NEWS_H ifndef and define when included.
* config/mips/nm-news-mips.h: Ditto.
* config/m68k/tm-m68k.h (REGISTER_CONVERT_TO_VIRTUAL,
REGISTER_CONVERT_TO_RAW): Change name of temporary variable.
Daniel Jacobowitz
Jim Blandy
Eli Zaretskii
Andrew Cagney
Kevin Buettner
Daniel Berlin
Jason Molenda
Stan Shebs
Michael Snyder
David Taylor
Martin Hunt
Geoffrey Noer
Peter Schauer
Stu Grossman
Dawn Perchik
Fred Fish