Change all references to stdout/stderr to gdb_stdout/gdb_stderr.
Replace all calls to stdio output functions with calls to
corresponding _unfiltered functions (`fprintf_unfiltered')
Replaced calls to fopen for output to gdb_fopen.
Added sufficient goo to utils.c and defs.h to make the above work.
The net effect is that stdio output functions are only directly used
in utils.c. Elsewhere, the _unfiltered and _filtered functions and
GDB_FILE type are used.
In the near future, GDB_FILE will stop being equivalant to FILE.
The semantics of some commands has changed in a very subtle way:
called in the right context, they may cause new occurences of
prompt_for_continue() behavior. The testsuite doesn't notice anything
like this, though.
Please respect this change by not reintroducing stdio output
dependencies in the main body of gdb code. All output from commands
should go to a GDB_FILE.
Target-specific code can still use stdio directly to communicate with
targets.
right operations ourself, rather than calling symbol_file_command.
If we re-read something, call clear_symtab_users not just
breakpoint_re_set.
* objfiles.h, objfiles.c (build_objfile_section_table): No longer
static.
* symfile.c (clear_symtab_users): Call clear_pc_function_cache.
* coffread.c, dbxread.c, elfread.c, mipsread.c, nlmread.c, paread.c
(*_symfile_offsets): Set objfile->num_sections.
* remote.c (remote_wait), symfile.c (syms_from_objfile):
Don't muck with objfile->num_sections now that all the symbol
readers set it.
* elfread.c: Clean up obsolete comment about handling only DWARF.
* paread.c: Remove comment about how we should use an "ordinary"
file format with an hppa suffix. There is nothing ordinary about SOM.
cleans up all kinds of hassles (which nm to use in munch, etc). The
new formatting conventions (mostly already followed) are that
the name of the _initialize_* routines must start in column zero,
and must not be inside #if.
* munch: Removed.
* Makefile.in: Remove references to munch.
* serial.c, remote.c, infptrace.c, maint.c, convex-tdep.c,
alpha-tdep.c, hp300ux-nat.c, hppab-nat.c, osfsolib.c, remote-es.c,
procfs.c, remote-udi.c, ser-go32.c, ultra3-xdep.c, sh-tdep.c,
i960-tdep.c, hppa-tdep.c, h8500-tdep.c, dpx2-nat.c, delta68-nat.c,
z8k-tdep.c: Make sure the above conventions are followed. Make
sure they are all declared as returning void. Clean up
miscellaneous comments and such.
* remote.c, remote-udi.c, remote-utils.h: Let target.h take care of
declaring these. Those random externs all over are error prone.
* Move "set remotebaud" from remote-utils.c to main.c to it applies
to remote.c as well.
* xcoffread.c (xcoff_symfile_read), coffread.c (coff_symfile_read):
Sort symtabs for this objfile only, not for all objfiles.
* symfile.c, symfile.h (sort_all_symtab_syms): Remove; no longer used.
remove #include "remote-utils.h". This makes it possible to build
GDB without remote-utils.c. Also, move setting of remote_debug
into main, so that all remote*.c files can use it (not just the
serial line ones). And, make baud_rate be an int.
* remote-udi.c: Change kiodebug to remote_debug.
* remote-utils.c: Move setting of baud rate and debug into main.c.
* remote-utils.h: Redefine sr_{get set}_debug and sr_{get set}_baud
to use baud_rate and remote_debug globals for compatibility.
* remote.c: Use remote_debug and baud_rate globals directly,
instead of sr_ functions, so that we don't need to load
remote-utils.c.
beyond the end of the last function in an objfile.
* coff-solib.c (coff_solib_add): Use BFD to get fields from .lib
section.
* infrun.c (wait_for_inferior): Modify test for subroutine entry
to include pc out of bounds of the previous function.
* remote.c (remote_wait): Use strtoul for parsing 'N' message.
Add code to relocate symfile_objfile->sections.
* stabsread.c (define_symbol): Make the caddr_t hack apply to `function
returning foo' as well as `pointer to foo'.
* remote.c [REMOTE_BREAKPOINT]: Use for breakpoint insn if defined.
* config/m68k/tm-m68k.h: Define it.
* mem-break.c, breakpoint.c: Improve comments.
Tue Jul 13 13:35:31 1993 Frederic Pierresteguy (F.Pierresteguy@frcl.bull.fr)
* config/m68k/tm-dpx2.h: Replace "tm-68k.h" with "m68k/tm-m68k.h".
* config/m68k/xm-dpx2.h: Define HAVE_TERMIOS not HAVE_TERMIO.
(remote_open): Use unpush_target not remote_close.
(remote_resume): If siggnal != 0, give warning not error().
(remote_wait, remote_interrupt, remote_interrupt_twice):
If we get two interrupts, let the user get out if they want.
(remote_{kill,mourn}): New functions.
i386-stub.c (handle_exception, case 'k'): Don't BREAKPOINT.
of initial connection attempt with INTERRUPT. Treat a timeout
while waiting for remote packet like a retry, unless the remote
side is actively running user code. Fix a few long printf_filtered's.
* xcoffread.c (read_xcoff_symtab): Don't use null symbol name for
trampoline symbols.
* buildsym.c (start_subfile): Allow null file name.
* am29k-tdep.c (_initialize_29k): Make it possible for the
user to set and query the address where function calls into the
inferior write a small scratch routine. `set call_scratch_address'
* inferior.h (PC_IN_CALL_DUMMY): Fix fencepost error.
* remote.c (remote_prepare_to_store): Only fetch regs if they are
not already cached validly.
application, and it will speak GDB remote protocol!
* remote.c (remote_wait): Change 'T' (expedited reply) message to
deal with arbitrary registers. Needed for sparc-stub,
conditional.
* hppabsd-core.c: Don't include "param.h", include <sys/param.h>
instead.
* remote.c (remote_wait): Cast signal to void * to avoid warning
from busted HP compiler.
* coffread.c (coff_end_symtab): Cast 2nd arg of complain() to
correct type.
* defs.h (NORETURN): Define away for Lucid compiler.
* remote.c (remote_timer, remote_interrupt): Signal handlers
take one int arg.
* ser-termios.c (serial_write, serial_close): Return whatever
value the write/close call returns, rather than falling off end.
* inferior.h (PTRACE_ARG3_TYPE): Third arg to ptrace is int on
more systems than it is "char *". Define PTRACE_ARG3_TYPE to
default to int.
* infptrace.c, hppabsd-xdep.c, hppahpux-xdep.c, i386-xdep.c,
inferior.h (call_ptrace): Use PTRACE_ARG3_TYPE to declare type
of third arg.
* a68v-xdep.c, arm-xdep.c, convex-xdep.c, hp300ux-xdep.c, infrun.c,
m88k-xdep.c, mach386-xdep.c, mips-xdep.c, os68k-xdep.c, pyr-tdep.c,
pyr-xdep.c, rs6000-xdep.c, sparc-xdep.c, sun3-xdep.c, sun386-xdep.c,
symm-xdep.c, ultra3-xdep.c: Use PTRACE_ARG3_TYPE to cast ptrace
argument 3.
* sparc-xdep.c, a68v-xdep.c (fetch_inferior_registers,
store_inferior_registers): Supply missing fourth argument to
ptrace().
(_initialize_remote): `set remotedebug' enables packet trace.
* dbxread.c (process_one_symbol:N_FUN): GCC now produces relative
N_SLINE's, etc, just like Sun cc on Solaris2.
* am29k-tdep.c (read_register_stack, write_register_stack):
Change RSTACK_HIGH_ADDR to rstack_high_address, a user-settable
variable. Add `set' and `show' commands for it.
* doc/gdb.texinfo: Document it.
* eval.c: Avoid residue-by-zero when evaluating without side effects.
(Bug and fix found by Pierre Willard.)
* sparc-tdep.c: Clean up slightly for Solaris2.
* All GDB files that #include defs.h: Removed stdio.h.
(defs.h): #include stdio.h.
This has been tested by building GDBs for all targets hosted on Sun4.
None of the build problems were related to stdio.h inclusion. (n.b.
many configurations don't build for other reasons.)
size, and use throughout. Round buffer size up if too many regs.
Support baud rate setting and try for an 8-bit path. If
interrupted while waiting for target, send a ^C down the wire.
Avoid single-byte reads.
* tm-mips.h: Add more embedded-system registers to REGISTER_NAMES
and NUM_REGS.
* mips-xdep.h: Avoid the embedded regs when on Unix.
Wed Apr 17 17:09:48 1991 Jim Kingdon (kingdon at cygint.cygnus.com)
* i386-tdep.c (i386_get_frame_setup): Use SWAP_TARGET_AND_HOST
before returning locals or slocals.
* i386-tdep.c (i386_follow_jump): Do not add data16 to pos in
call to codestream_seek; add one to pos if (and only if)
we are dealing with a jump with data16 == 1 (i.e. 0x66, 0xe9).
Mon Apr 15 12:04:32 1991 Jim Kingdon (kingdon at cygint.cygnus.com)
* valops.c (call_function_by_hand): Put dummy1 in target order
before FIX_CALL_DUMMY.
* tm-i386v.h (FIX_CALL_DUMMY): Don't depend on host byte order.
Sun Apr 14 11:55:19 1991 Jim Kingdon (kingdon at cygint.cygnus.com)
* valops.c (push_word): Add SWAP_TARGET_AND_HOST.
* remote.c (remote_open): Send '+' before calling putpkt().
* tm-i386v.h (REGISTER_VIRTUAL_TYPE): Return pointer to void,
not int, for pc, fp, and sp.
* remote.c (remote_open): Call start_remote after putpkt("?");
target.c: Add target_preopen and target_command.
Remove target_info.
(add_target): Call add_cmd and mess with targetlist->doc.
core.c, exec.c, remote-eb.c, remote-nindy.c, remote-vx.c,
remote-vx.68.c, inftarg.c, remote.c: Add doc field to target struct.
Call target_preopen from open routine.
Thomas Lord
Jim Kingdon
Stu Grossman
K. Richard Pixley
Ian Lance Taylor
John Gilmore
Fred Fish
Michael Tiemann
gdb-3.5