binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Fred Fish	b607efe714	See gdb ChangeLog entry with header: Thu Jul 25 19:41:31 1996 Fred Fish <fnf@cygnus.com> for a rather huge set of changes. I was going to put them here, but it made cvs dump core. :-(	31 years ago
Stu Grossman	fdfa331511	* Makefile.in, breakpoint.c, corelow.c, fork-child.c, inflow.c, infrun.c, mac-nat.c, procfs.c, remote.c, sol-thread.c, thread.c, win32-nat.c, config/nm-lynx.h: Rename thread.h to gdbthread.h to avoid conflict with Solaris /usr/include/thread.h.	31 years ago
Stu Grossman	8fc2b4170d	* fork-child.c (fork_inferior), inferior.h: init_trace_fun now returns a possibly modified pid. * inftarg.c (ptrace_him): Now returns pid; * m3-nat.c (m3_trace_him): Now returns pid; * infcmd.c (run_command): Minor cleanup. * infrun.c (wait_for_inferior): Add another check for one_stepped near where we read the pc to avoid erroneously setting random_signal for multi-threaded support. * procfs.c: Add support for Solaris LWPs. Remove def of LOSING_POLL. Many cleanups... Several workarounds for Solaris lossage. System call entry and exit are now handled by dynamically registered handlers. * (syscallname): Don't barf when handed an unknown syscall number. * (info_proc_syscalls): Ditto. * sol-thread.c: New file. Implements Solaris thread support. * symfile.c (symbol_file_add): Add call to target_new_objfile to notify target-dependent code about new symbol tables. * (clear_symtab_users): Call target_new_objfile to notify it of the removal of all symbol tables. * target.c (push_target): Make sure that to_close is non-zero before calling it. * target.h (target_new_objfile): Provide default. * config/alpha/nm-osf2.h: Define LOSING_POLL because this version of OSF can't hack using poll with /proc. * config/sparc/nm-sun4sol2.h (target_new_objfile): Define to be sol-thread-new-objfile. * config/sparc/sun4sol2.mh: Add sol-thread.o to NATDEFFILES, and add libthread_db.so.1 to NAT_CLIBS. * config/sparc/tm-sun4sol2.h: Define PIDGET, TIDGET, and target_pid_to_str.	31 years ago
Jeff Law	e6e4560d78	Remove some #if 0 code which creeped into wait_for_inferior during my previous change.	31 years ago
Jeff Law	7dbb5eed30	* infrun.c (wait_for_inferior): Call registers_changed when restarting the inferior to get over a nullified instructions. Fixes PA testsuite regressions.	31 years ago
Jeff Law	894d8e6946	* infrun.c (wait_for_inferior): Move "have_waited" label outside of #ifdef conditionals. Don't trash the wait status if we get a signal and the current instruction is nullified. Fixes long standing problem on the PA (spurious SIGTRAPs)..	31 years ago
Jeff Law	fa3764e2bf	* From Peter Schauer. * breakpoint.c (breakpoint_re_set_one): Keep temporary breakpoints bp_until, bp_finish, bp_watchpoint_cope, bp_call_dummy and bp_step_resume in case breakpoint_re_set_one is called due to a step over a dlopen call. * infrun.c (wait_for_inferior): Always remove breakpoints from inferior in BPSTAT_WHAT_CHECK_SHLIBS case.	31 years ago
Jeff Law	11be829fa1	* From Peter Schauer: * infrun.c (wait_for_inferior): Remove breakpoints and switch terminal settings before calling SOLIB_ADD. * solib.c (enable_break, SVR4 variant): Don't map in symbols for the dynamic linker, the namespace pollution causes real problems.	31 years ago
Jeff Law	87273c713f	* symfile.c (auto_solib_add): Renamed from auto_solib_add_at_startup. All references changed. * breakpoint.c (bpstat_what): Add shlib_event to the class types. Update state table. Reformat so that it's still readable. When we hit the shlib_event breakpoint, set the calss of shlib_event. (breakpoint_1): Add "shlib events" as a breakpoint type. Print the shlib_event breakpoint like other breakpoints. (create_solib_event_breakpoint): New function. (breakpoint_re_set_one): Handle solib_event breakpoints. * breakpoint.h (enum bytype): Add bp_shlib_event breakpoint type. (enum bpstat_what_main_action): Add BPSTAT_WHAT_CHECK_SHLIBS action. (create_solib_event_breakpoint): Declare. * infrun.c (wait_for_inferior): Handle CHECK_SHLIBS bpstat. (normal_stop): Inform the user when the inferior stoped due to a shared library event. (_initialize_infrun): Add new set/show variable "stop_on-solib-events" to control whether or not gdb continues the inferior or stops it when a shared library event occurs. * minsyms.c (lookup_minimal_symbol_solib_trampoline): New function. * somsolib.c (TODO list): Update. (som_solib_create_inferior_hook): Arrange for gdb to be notified when significant shared library events occur. * hppa-tdep.c (find_unwind_entry): No longer static. First cut at the machine independent changes for 7363. Also includes code to automatically track shl_load/shl_unload calls on hpux.	31 years ago
Stu Grossman	3f687c7896	* infrun.c (wait_for_inferior): Disable questionable code near the step range test. Replace call detection test with much simpler (and more efficient) test that doesn't require prologue examination (as often). * symtab.c symtab.h (in_prologue): New function that indicates whether or not we are in a function prologue. This uses the symbol table, and then falls back to prologue examination if that fails. It's much more efficient for remote debugging because it avoids examining memory, which is very slow. This is used in wait_for_inferior to determine if we've made a function call that needs to be skipped over (for next/nexti). * mips-tdep.c (after_prologue): New function, returns the PC after the prologue. Uses PDRs and the symbol table. (mips_find_saved_regs): Use in_prologue() to avoid costly prologue examination if possible. (mips_skip_prologue): Use after_prologue() if possible to avoid costly prologue examination.	31 years ago
J.T. Conklin	2b57629364	* configure.in: Check for working mmap, ansi headers, string.h, strings.h, and memory.h. * configure: Regenerated. * gdb_stat.h: New file, "portable" <sys/stat.h>. * gdb_string.h: New file, "portable" <string.h>. * altos-xdep.c, arm-tdep.c, arm-xdep.c, convex-tdep.c, convex-xdep.c, coredep.c, cxux-nat.c, dbxread.c, exec.c, gould-xdep.c, hppa-tdep.c, i386aix-nat.c, i386b-nat.c, i386mach-nat.c, i386v-nat.c, infptrace.c, m88k-nat.c, main.c, mdebugread.c, objfiles.c, os9kread.c, procfs.c, pyr-xdep.c, rs6000-nat.c, source.c, standalone.c, stuff.c, sun386-nat.c, symfile.c, symm-nat.c, symm-tdep.c, symtab.c, top.c, ultra3-nat.c, ultra3-xdep.c, umax-xdep.c, xcoffread.c: Include "gdb_stat.h" instead of <sys/stat.h>. * alpha-tdep.c, breakpoint.c, buildsym.c, c-typeprint.c, ch-typeprint.c, coffread.c, command.c, core-sol2.c, core-svr4.c, core.c, corelow.c, cp-valprint.c, dbxread.c, dcache.c, demangle.c, dpx2-nat.c, dstread.c, dwarfread.c, elfread.c, environ.c, eval.c, exec.c, f-lang.c, f-typeprint.c, f-valprint.c, findvar.c, fork-child.c, gdbtypes.c, hpread.c, i386-tdep.c, infcmd.c, inflow.c, infptrace.c, infrun.c, irix5-nat.c, language.c, m2-typeprint.c, main.c, mdebugread.c, minsyms.c, mipsread.c, monitor.c, nlmread.c, objfiles.c, os9kread.c, osfsolib.c, parse.c, printcmd.c, procfs.c, regex.c, remote-adapt.c, remote-arc.c, remote-array.c, remote-bug.c, remote-e7000.c, remote-eb.c, remote-es.c, remote-hms.c, remote-mm.c, remote-os9k.c, remote-pa.c, remote-sim.c, remote-st.c, remote-udi.c, remote-utils.c, remote-vx.c, remote-vx29k.c, remote-vx68.c, remote-vx960.c, remote-vxmips.c, remote-vxsparc.c, remote.c, solib.c, somread.c, source.c, stabsread.c, stack.c, symfile.c, symmisc.c, symtab.c, target.c, top.c, typeprint.c, utils.c, valarith.c, valops.c, valprint.c, values.c, xcoffread.c: Include "gdb_string.h" instead of <string.h>. * gdbtk.c: Likewise. * config/xm-sysv4.h, i386/xm-ptx.h, m68k/xm-sun3os4.h, sparc/xm-sun4os4.h (HAVE_MMAP): Removed. * config/xm-lynx.h, config/i386/xm-ptx.h, config/m68k/nm-apollo68b.h, config/m68k/xm-hp300hpux.h, config/mips/xm-irix3.h, config/mips/xm-mips.h, config/mips/xm-news-mips.h, config/mips/xm-riscos.h, config/pa/hppah.h, config/rs6000/xm-rs6000.h, config/sparc/xm-sun4os4.h, config/sparc/xm-sun4sol2.h, config/vax/xm-vaxbsd.h, config/vax/xm-vaxult.h, config/vax/xm-vaxult2.h (MEM_FNS_DECLARED): Removed. * config/mips/xm-irix3.h, config/mips/xm-mips.h, config/pa/xm-hppah.h (memcpy, memset): Removed declarations.	32 years ago
Jeff Law	48f4903f36	* infrun.c (wait_for_inferior): When we hit a breakpoint for the wrong thread, make sure to write the fixed PC value into the thread that stopped. Restart all threads after single stepping over a breakpoint for a different thread. * breakpoint.c (set_momentary_breakpoint): Make momentary breakpoints thread specific in a multi-threaded program. * lynx-nat.c (child_resume): Add some comments. Correctly choose between the single and multi-threaded step and continue ptrace calls. Some of the lynx-6100 single stepping fixes.	32 years ago
Stu Grossman	c66ed884ed	* infrun.c: Add #ifdef HP_OS_BUG to all references to trap_expected_after_continue. * (wait_for_inferior): Fix for remote watchpoints. Don't try to insert breakpoints while target is running (this only works on some native targets). This may also speed up native watchpoints considerably.	32 years ago
Jim Kingdon	4cc1b3f79d	* gdbserver/remote-utils.c (write_ok): Write "OK", not "Ok", to match stubs and protocol spec. * gdbserver/remote-utils.c (remote_open): Cast to struct sockaddr when passing to function which expects that. The following changes aren't quite enough to make things work with LynxOS (apprently kernel problems). * infrun.c (wait_for_inferior): When resuming new thread, pass pid not -1 for remote case. * thread.c (info_threads_command): Give error if !target_has_stack. * infrun.c (start_remote): Call init_thread_list. * thread.c (info_threads_command): Don't call kill for remote debugging target. * target.c (normal_pid_to_str): Print "thread" not "process" for remote. * remote.c, gdbserver/: Add 'H', 'S', and 'C' requests, 'X' response, and `thread' part of 'T' response. gdbserver/: If program exits, send packet to GDB before exiting. Handle termination with a signal the same as exiting with an exitstatus. remote.c: Don't try to kill program after getting an 'X' response. * infrun.c (wait_for_inferior): Add comment about kill versus mourn.	32 years ago
Stu Grossman	479f0f18d4	* defs.h, infrun.c (wait_for_inferior), top.c: Call target_wait_hook to allow GUI to handle blocking for inferior. Call call_command_hook in execute_command to provide means for wrapping commands with GUI state change updates. * gdbtk.c (gdb_cmd): Force GUI into idle mode when errors occur. * (gdb_stop): New tcl command to stop the target process. * (x_event, gdbtk_wait): Allow GUI to interrupt gdb out of target waits. * (gdbtk_call_command): Wrapper around command processing to alert GUI of target state changes. * (gdbtk_init): Get the fd of X server for doing async notification of X events (via x_event). Setup new hooks. * gdbtk.tcl: Add scrollbars to assembly and command windows. * Change window foreground & background colors. * Create margin tag for breakpoints in source and assembly windows. * Add new routines to be invoked when target state changes to/from idle. * Add start of expression window. * Change bindings of mouse button 1 in assembly and source window to just set or clear breakpoints when in the margin tag. * Change shape of register window to be more vertical to better reflect it's contents. * Add stop button. * Cleanup some code around command window bindings. * infrun.c (wait_for_inferior): Make sure through_sigtramp_breakpoint is non-null before deleting.	32 years ago
Stu Grossman	320f93f714	* dbxread.c, partial-stab.h (near N_SO): SO stabs with blank names mean end of .o file. * infrun.c (wait_for_inferior): Clean up multi-thread logic near top of routine. Handle new thread notification cleanly. * lynx-nat.c (child_wait): General cleanups, handle new LynxOS thread notification scheme. * (child_resume): General cleanups, handle resumption of all threads properly.	33 years ago
Stan Shebs	6d40175db0	Wed Jun 1 11:08:52 1994 Stan Shebs (shebs@andros.cygnus.com) Hardware watchpoints for Linux, from Rick Sladkey (jrs@world.std.com). * infrun.c (wait_for_inferior) [HAVE_CONTINUABLE_WATCHPOINT]: Add new hardware breakpoint recovery method. * i386v-nat.c (i386_insert_watchpoint, i386_insert_nonaligned_watchpoint, i386_remove_watchpoint, i386_stopped_by_watchpoint) [TARGET_CAN_USE_HARWARE_WATCHPOINT]: New functions to support the 386 hardware debugging registers. * config/i386/nm-linux.h (TARGET_CAN_USE_HARDWARE_WATCHPOINT, HAVE_CONTINUABLE_WATCHPOINT, STOPPED_BY_WATCHPOINT, target_insert_watchpoint, target_remove_watchpoint): Define these macros to use the hardware debugging functions in i386v-nat.c.	33 years ago
Jim Kingdon	1c95d7ab2e	gcc -Wall lint: * breakpoint.c (watchpoint_check): Remove unused variable b. * stack.c (print_frame_info): Move sp and buf inside #if. * eval.c (evaluate_subexp): Remove unused variables pp, mangle_ptr, ptr, and mangle_tstr. * valarith.c (value_x_binop): Remove unused variables mangle_tstr and mangle_ptr. * symtab.c (lookup_symtab): Put variable copy inside #if. (decode_line_1): Put variable q1 inside #if 0. * target.h: Declare target_link. * infrun.c (wait_for_inferior): Remove unused variables signame. * remote.c (remote_resume): Remove unused variable name. * c-exp.y (parse_number): Parenthesize operand of shift. * dbxread.c (record_minimal_symbol): Parenthesize operand of && (this is a semantic change, the warning seems to have detected a bug). * dbxread.c (end_psymtab): Move variable p1 inside #if. * coffread.c: Move variable temptype inside #if. * ch-typeprint.c (chill_type_print_base): Remove unused variable name. * ch-valprint.c: #include typeprint.h and ch-lang.h. (chill_val_print): Remove unused variable in_range. (chill_val_print): Remove statement "length > TYPE_LENGTH (type);". (chill_val_print): Add default case for switch. * stabsread.h: Declare stabsect_build_psymtabs. * os9kread.c (read_minimal_symbols): Make this return void. (os9k_symfile_read): Remove unused variables stb_exist and val. (os9k_symfile_init): Remove unused variable val. (fill_sym): Remove unused variable id. (read_os9k_psymtab): Put variable back_to inside #if 0. Remove unused variable nsl. Remove unused variable symfile_bfd. #if 0 unused variables lbrac_unmatched_complaint and lbrac_mismatch_complaint. Remove declaration for non-existent function os9k_next_symbol_text. * annotate.c, annotate.h: New files, containing a function for each annotation which outputs it. * Move breakpoints_changed from breakpoint.c to annotate.c. * breakpoint.c, blockframe.c, infrun.c, cp-valprint.c, main.c, printcmd.c, source.c, stack.c, utils.c, valprint.c: Use annotate.c functions to output annotations. * Makefile.in (OBS): Add annotate.o.	33 years ago
Jeff Law	999dd04b89	* breakpoint.h (enum bptype): Add bp_hardware_watchpoint and bp_watchpoint_scope breakpoints. (struct breakpoint): Add val_chain and related_breakpoint fields for use by watchpoints. * breakpoint.c (within_scope): Delete. No longer used. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Provide default definition. (target_{remove,insert}_watchpoint): Likewise. (can_use_hardware_watchpoint): New function. (remove_breakpoint): New function to remove a single breakpoint or hardware watchpoint. (insert_breakpoints): Handle insertion of hardware watchpoints. Store a copy of the value chain derived from the watchpoint expression. (remove_breakpoints): Simplify by using remove_breakpoint. (delete_breakpoint): Likewise. (watchpoint_check): Delete the watchpoint and watchpoint scope breakpoints when the watchpoint goes out of scope. Save & restore the current frame after checking watchpoints. (breakpoint_init_inferior): Likewise (restarting the program makes all local watchpoints go out of scope). (bpstat_stop_status): Handle hardware watchpoints much like normal watchpoints. Delete the watchpoint and watchpoint scope breakpoint when the watchpoint goes out of scope. Remove and reinsert all breakpoints before returning if we stopped when a hardware watchpoint fired. (watch_command): Use a hardware watchpoint when possible. If watching a local expression, build a scope breakpoint too. (map_breakpoint_numbers): Also call given function for any related breakpoints. (disable_breakpoint): Never disable a scope breakpoint. (enable_breakpoint): Handle hardware breakpoints much like normal breakpoints, but recompute the watchpoint_scope breakpoint's frame and address (if we have an associated scope breakpoint). (read_memory_nobpt): Handle hardware watchpoints like normal watchpoints. When necessary handle watchpoint_scope breakpoints. (print_it_normal, bpstat_what, breakpoint_1, mention): Likewise. (clear_command, breakpoint_re_set_one, enable_command): Likewise. (disable_command): Likewise. * blockframe.c (find_frame_addr_in_frame_chain): New function. Extern prototype added to frame.h * infrun.c (wait_for_inferior): Set current_frame and select a frame before checking if we stopped due to a hardare watchpoint firing. Handle stepping over hardware watchpoints. (normal_stop): Remove unnecessary call to select_frame. * value.h (value_release_to_mark): Declare. * values.c (value_release_to_mark): New function. * procfs.c (procfs_wait): Add cases for hardware watchpoints. (procfs_set_watchpoint, procfs_stopped_by_watchpoint): New functions. * hppab-nat.c (hppa_set_watchpoint): New function. * config/pa/nm-hppab.h (STOPPED_BY_WATCHPOINT): Define. (HAVE_STEPPABLE_WATCHPOINT): Define. (TARGET_CAN_USE_HARDWARE_WATCHPOINT): Define. (target_{insert,delete}_watchpoint): Define.	33 years ago
Peter Schauer	2fe3b329f6	* infrun.c (IN_SOLIB_TRAMPOLINE): Correct comment, trampolines are in the .plt section. * minsyms.c (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): New functions for handling stepping into -g compiled shared libraries. * symtab.h (lookup_solib_trampoline_symbol_by_pc, find_solib_trampoline_target): Add prototypes. * config/tm-sunos.h (IN_SOLIB_TRAMPOLINE, SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * config/tm-sysv4.h (SKIP_TRAMPOLINE_CODE): Define to handle stepping into -g compiled shared libraries. * configure.in: Add mips--sysv4 support. * config/mips/mipsv4.mh, config/mips/mipsv4.mt, config/mips/tm-mipsv4.h, config/mips/xm-mipsv4.h, mipsv4-nat.c: New files for MIPS SVR4 support. * Makefile.in: Update for new mipsv4 files. * alpha-tdep.c (heuristic_proc_desc, find_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mips-tdep.c (heuristic_proc_desc): Use read_next_frame_reg to obtain the frame relative stack pointer. * mdebugread.c (parse_partial_symbols, psymtab_to_symtab1): Handle stStatic and stStaticProc symbols in stabs-in-ecoff output by entering them into the minimal symbol table. * printcmd.c (print_scalar_formatted): Do not try to unpack to a long for float formats. * solib.c: Include "elf/mips.h" only if DT_MIPS_RLD_MAP does not get defined in <link.h>. * solib.c (solib_add): Add shared library sections to the section table of the target before adding the symbols. * partial-stab.h: Relocate static and global functions. * dbxread.c (read_dbx_symtab): Remove unused variable end_of_text_address. Relocate text_addr when passing it to end_psymtab. For Alpha OSF/1 targets, enable gdb to set breakpoints in shared library functions before the executable is run. Retrieve dynamic symbols from stripped executables. * mipsread.c (read_alphacoff_dynamic_symtab): New function. * mipsread.c (mipscoff_symfile_read): Use it. Issue warning message if no debugging symbols were found. * alpha-tdep.c (alpha_skip_prologue): Silently return the unaltered pc if memory at the pc is not accessible and GDB_TARGET_HAS_SHARED_LIBS is defined. * config/alpha/nm-alpha.h (GDB_TARGET_HAS_SHARED_LIBS): Define, OSF/1 has shared libraries.	33 years ago
Jim Kingdon	d1c0c6cf7b	* infrun.c (wait_for_inferior): In checking remove_breakpoints_on_following_step, check through_sigtramp_breakpoint as well as step_resume_breakpoint.	33 years ago
Jim Kingdon	b5aff26825	* mips-tdep.c (mips_step_skips_delay), config/mips/tm-mips.h (STEP_SKIPS_DELAY): Added. * infrun.c (proceed) [STEP_SKIPS_DELAY]: Check for a breakpoint in the delay slot.	33 years ago
Jim Kingdon	bcc3771841	* breakpoint.h (enum bptype): New type bp_through_sigtramp. (bpstat_what_main_action): New code BPSTAT_WHAT_THROUGH_SIGTRAMP. * breakpoint.c (bpstat_what): Return BPSTAT_WHAT_THROUGH_SIGTRAMP if we hit a bp_through_sigtramp breakpoint. Remove kludge which ignored bs->stop for a bp_step_resume breakpoint. * infrun.c (wait_for_inferior): Make a through_sigtramp_breakpoint which performs one (the check_sigtramp2 one) of the functions which had been handled by the step_resume_breakpoint. For each use of the step_resume_breakpoint, make it still use the step_resume_breakpoint, use the through_sigtramp_breakpoint, or operate on both. Deal with BPSTAT_WHAT_THROUGH_SIGTRAMP return from bpstat_what. When setting the frame address of the step resume breakpoint, set it to the address for frame before the call instruction is executed, not after.	33 years ago
Peter Schauer	f1de67d323	* infrun.c (normal_stop): Set stop_pc after popping the dummy frame in case execution was stopped in the called function. * stack.c (print_frame_info, frame_info): If backtracing through a call dummy, handle the starting source line number on a line boundary like backtracing through sigtramp. * sparc-tdep.c (sparc_frame_find_saved_regs): Get frame address for call dummy frame right. Remove old test for dummy frame, it has been unused at least since gdb-3.5. * sparc-tdep.c (sparc_push_dummy_frame): Set return address register of the dummy frame.	33 years ago
Jim Kingdon	db4340a625	* infrun.c (signals_info), target.c (target_signal_from_name): Use ugly casts to avoid enumvar < enumvar or enumvar++.	33 years ago
Jim Kingdon	4d4f2d50c8	* infrun.c (_initialize_infrun): Add TARGET_SIGNAL_POLL to list of signals for which stop and print are cleared by default.	33 years ago
Jim Kingdon	fcbc95a72a	* target.h: Add TARGET_WAITKIND_LOADED and TARGET_WAITKIND_SPURIOUS. * target.c (store_waitstatus): Add CHILD_SPECIAL_WAITSTATUS hook. * infrun.c (wait_for_inferior): Replace SIGTRAP_STOP_AFTER_LOAD with code which looks for those two waitkinds. Use switch statement. * config/rs6000/tm-rs6000.h: Replace SIGTRAP_STOP_AFTER_LOAD with CHILD_SPECIAL_WAITSTATUS.	33 years ago
Jim Kingdon	67ac975911	* target.h: Add enum target_waitkind, enum target_signal, and struct target_waitstatus. Change status argument to target_wait to be struct target_waitstatus * instead of int . target.h, infrun.c, all targets: Change type of signal arguments to resume(), proceed(), and target_resume() from int to enum target_signal. * All targets (_wait, _resume): Change accordingly. * infcmd.c (program_info, signal_command), throughout infrun.c, * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff. * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex signal code stuff right with the new signals would be non-trivial). * inferior.h (stop_signal): Make it enum target_signal not int. * target.c, target.h (target_signal_to_string, target_signal_to_name, target_signal_from_name): New functions. * inftarg.c, target.h (target_signal_to_host, target_signal_from_host, store_waitstatus): New functions. * procfs.c (procfs_notice_signals): Use them. * i960-tdep.c (i960_fault_to_signal): New function, to replace print_fault. * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.	33 years ago
Jim Kingdon	f161923490	* infrun.c (wait_for_inferior): Enable code which assumes that if we jump into the prologue from another function, then it was a subroutine call. #if 0 AT_FUNCTION_START; the above code should take care of this case.	33 years ago
Jim Kingdon	b2f03c3027	Sun Dec 26 16:59:39 1993 Jim Kingdon (kingdon@lioth.cygnus.com) * infrun.c (wait_for_inferior): Remove confusing and inaccurate stuff about subroutine calls, return, etc., from comment which says "We've wandered out of the step range.". Sun Dec 26 09:18:10 1993 Peter Schauer (pes@regent.e-technik.tu-muenchen.de) * infrun.c (wait_for_inferior): When checking whether the line has changed, check the symtab as well.	33 years ago
Thomas Lord	199b2450f6	Change the stream argument to _filtered to GDB_FILE *. Change all references to stdout/stderr to gdb_stdout/gdb_stderr. Replace all calls to stdio output functions with calls to corresponding _unfiltered functions (`fprintf_unfiltered') Replaced calls to fopen for output to gdb_fopen. Added sufficient goo to utils.c and defs.h to make the above work. The net effect is that stdio output functions are only directly used in utils.c. Elsewhere, the _unfiltered and _filtered functions and GDB_FILE type are used. In the near future, GDB_FILE will stop being equivalant to FILE. The semantics of some commands has changed in a very subtle way: called in the right context, they may cause new occurences of prompt_for_continue() behavior. The testsuite doesn't notice anything like this, though. Please respect this change by not reintroducing stdio output dependencies in the main body of gdb code. All output from commands should go to a GDB_FILE. Target-specific code can still use stdio directly to communicate with targets.	33 years ago
Stu Grossman	b58a197344	* infrun.c (wait_for_inferior): Fix PC out of subroutine bounds check to use prev_func_start/end instead of stop_func_start/end. * remote-udi.c (store_register): Invalidate NPC/PC_REGNUM after changing PC.	33 years ago
Jim Kingdon	100f92e2de	* Makefile.in (c-exp.tab.o): Remove notice about shift/reduce conflicts which no longer occur. gcc -Wall lint: * findvar.c (symbol_read_needs_frame), corelow.c (ignore), inflow.c (gdb_has_a_terminal): Make sure to return a value. * regex.h: Declare re_set_syntax. * printcmd.c: Include valprint.h. * infcmd.c, exec.c, maint.c, core.c: Include language.h. * maint.c: Include expression.h. * infrun.c, fork-child.c, corelow.c, inflow.c: Include thread.h. * inftarg.c: Include command.h. * coredep.c: Include value.h. * c-exp.y, m2-exp.y, ch-exp.y: Include bfd.h, symfile.h and objfiles.h. * ch-typeprint.c: Include typeprint.h. * ch-valprint.c: Include c-lang.h. * nlmread.c: Include buildsym.h. * environ.c: Include gdbcore.h. Only include defs.h once. (set_in_environ): Cast const char * to char * when passing to set_gnutarget. Remove unused variables: * printcmd.c (printf_command): args_to_vprintf. * coffread.c (coff_symfile_init): strsection. Move variables to within the #ifdefs where they are used: * symtab.c (gdb_mangle_name): opname. * inftarg.c (child_attach): pid and exec_file. * inftarg.c (child_detach): siggnal. * objfiles.c (allocate_objfile): mapto, md, and fd. * objfiles.c (free_objfile): mmfd. * infrun.c (wait_for_inferior): Include BPSTAT_WHAT_LAST in switch. * infrun.c (wait_for_inferior): Remove unused same_pid label. * inferior.h: Declare set_sigint_trap and clear_sigint_trap. * parser-defs.h: Declare write_exp_elt_block. * stabsread.h: Declare elfstab_offset_sections and coffstab_build_psymtabs.	33 years ago
Jim Kingdon	c0c14c1e8d	* infrun.c (wait_for_inferior): Clean up comments which were at the top of the file, making them more concise and moving them with the code (Sorry, Randy, but these stream-of-consciousness comments really have to go). Switch the order of the "&&", which makes things clearer and turns out to be an improvement with respect to side effects and speed.	33 years ago
Jim Kingdon	18122d8bd3	* infrun.c: Add comment about signals.	33 years ago
Jim Kingdon	749e538bc8	* infrun.c: Add comment about signals. * fork-child.c (fork_inferior): Remove CREATE_INFERIOR_HOOK again. Stu reinstated it (accidently I assume).	33 years ago
Stu Grossman	de43d7d005	* breakpoint.c (breakpoint_thread_match break_command_1): Thread-specific breakpoint support. * breakpoint.h (struct breakpoint): Add thread id field. * fork-child.c (fork_inferior): Move call to init_thread_list() back a bit so that init_trace_fun can do thread functions. * hppa-tdep.c (restore_pc_queue): Add pid to call to target_wait. * hppab-nat.c (child_resume): Handle default pid. * hppah-nat.c (child_resume): Handle default pid. * i386lynx-nat.c (child_wait): New arg pid. * inflow.c (kill_command): Reset thread list. * infptrace.c (child_resume): Handle default pid. * infrun.c: Thread-specific breakpoint support. * inftarg.c (child_wait): Add pid arg. * osfsolib.c (solib_create_inferior_hook): Add pid to call to target_resume. * procfs.c: Multi-thread support. * remote-bug.c (bug_wait): Add pid arg. * remote-hms.c (hms_wait): Add pid arg. * remote-mips.c (mips_wait): Add pid arg. * remote-mon.c (monitor_wait): Add pid arg. * remote-nindy.c (nindy_wait): Add pid arg. * remote-sim.c (gdbsim_wait): Add pid arg. * remote-udi.c (udi_wait): Add pid arg. * remote-vx.c (vx_wait): Add pid arg. * remote-z8k.c (sim_wait): Add pid arg. * remote.c (remote_wait): Add pid arg. * solib.c (solib_create_inferior_hook): Add pid to call to target_resume. * target.h (struct target_ops): Add pid arg to to_wait and to_notice_signals. * thread.c (valid_thread_id): New func to validate thread #s. * (pid_to_thread_id): New func to do the obvious. * thread.h: Prototypes for above. * coff-solib.c (coff_solib_add): Use nameoffset field to locate filename.	33 years ago
Steve Chamberlain	3f0184acb0	* h8300-tdep.c (sim_load, sim_kill, sim_open, sim_set_args): New functions. * infrun.c (normal_stop): Don't try and set the pc in the current frame coredump if there isn't one. * remote-sim.c (gdbsim_store_register): Don't SWAP_TARGET_AND_HOST, sim_store_register takes bytes in raw order. (gdbsim_wait): Set status with WSETSTOP. * config/h8300/tm-h8300.h (sr_get_debug): Define	33 years ago
Jim Kingdon	2f1c7c3fd0	* blockframe.c (find_pc_partial_function): If we call PSYMTAB_TO_SYMTAB, call target_terminal_ours_for_output first. This is needed now that wait_for_inferior passes in endaddr. * infrun.c: Move call to target_terminal_inferior from proceed to resume.	33 years ago
Stu Grossman	981a330933	* blockframe.c (find_pc_partial_function): Fix handling for PCs beyond the end of the last function in an objfile. * coff-solib.c (coff_solib_add): Use BFD to get fields from .lib section. * infrun.c (wait_for_inferior): Modify test for subroutine entry to include pc out of bounds of the previous function. * remote.c (remote_wait): Use strtoul for parsing 'N' message. Add code to relocate symfile_objfile->sections.	33 years ago
Jim Kingdon	cf3e377e61	* breakpoint.c, breakpoint.h (breakpoint_init_inferior): New function that clears the `inserted' flag for all breakpoints and deletes any breakpoints which should go away between runs of programs. * inflow.c (generic_mourn_inferior), infrun.c (init_wait_for_inferior), remote-es.c (es1800_load), comments in exec.c and corelow.c: Use it instead of mark_breakpoints_out. * breakpoint.c (mark_breakpoints_out): Update comment, tm-rs6000.h uses it in a completely different context. * breakpoint.c (breakpoint_re_set_one): Add bp_call_dummy case.	33 years ago
Peter Schauer	cef4c2e7a5	Changes to support alpha OSF/1 in native mode. * alpha-nat.c, alpha-tdep.c, config/alpha/alpha-osf1.mt, config/alpha/nm-alpha.h, config/alpha/tm-alpha.h, osfsolib.c: New files. * Makefile.in: Add new files and dependencies. * configure.in: Add alpha target. * config/alpha/alpha-osf1.mh (NATDEPFILES): Add osfsolib.o * config/alpha/alpha-osf1.mh (MH_CFLAGS): Remove, we can handle shared libraries now. * config/alpha/xm-alpha.h: Cleanup, get MAKEVA_* defines right. * defs.h (CORE_ADDR): Make its type overridable via CORE_ADDR_TYPE, provide `unsigned int' default. * breakpoint.c (breakpoint_auto_delete): Delete only if we really stopped for the breakpoint. * stabsread.c, stabsread.h (define_symbol): Change valu parameter to a CORE_ADDR. * stabsread.c (read_range_type): Handle the case where the lower bound overflows and the upper doesn't and the range is legal. * infrun.c (resume): Do not step a breakpoint instruction if CANNOT_STEP_BREAKPOINT is defined. * inferior.h (CALL_DUMMY_LOCATION): New variant AT_ENTRY_POINT. Now that we have the bp_call_dummy breakpoint the call dummy code is no longer needed. PUSH_DUMMY_FRAME, PUSH_ARGUMENTS and FIX_CALL_DUMMY can be used to set up everything for the dummy. The breakpoint for the dummy is set at the entry point and thats it. * blockframe.c (inside_entry_file, inside_entry_func): Do not stop backtraces if pc is in the call dummy at the entry point. * infcmd.c (run_stack_dummy): Handle AT_ENTRY_POINT case. Use the expected breakpoint pc when setting up the frame for set_momentary_breakpoint. * symfile.c (entry_point_address): New function for AT_ENTRY_POINT support. * valops.c (call_function_by_hand): Handle AT_ENTRY_POINT case.	33 years ago
K. Richard Pixley	07a5991a09	infcmd.c (step_1), infrun.c (wait_for_inferior): collapse SHIFT_INST_REGS ifdef and insert macro.	33 years ago
Jim Kingdon	cb6b02027c	* breakpoint.h, breakpoint.c (bpstat_stop_status): Add new argument not_a_breakpoint. * infrun.c (wait_for_inferior): Pass it. Also consolidate the test of whether we are stepping into a CURRENTLY_STEPPING macro.	33 years ago
Jim Kingdon	84d598611e	* defs.h (make_cleanup): Change PTR to void * when inside PARAMS. Some of the following is in #ifdef CALL_DUMMY_BREAKPOINT_OFFSET. * breakpoint.h (enum bptype): Add bp_call_dummy. (struct bpstat_what): Add call_dummy field. * infrun.c (wait_for_inferior): Deal with it. * breakpoint.c (bpstat_what): Deal with call dummy breakpoint. * infcmd.c (run_stack_dummy): Set the call dummy breakpoint. * config/sparc/tm-sparc.h: Define CALL_DUMMY_BREAKPOINT_OFFSET.	33 years ago
Stu Grossman	c9de302ba5	* infrun.c (wait_for_inferior): Allow user to single step within a stack dummy.	33 years ago
Jim Kingdon	37c99ddb4e	* inferior.h, infrun.c, thread.c, infcmd.c: Remove all uses of pc_changed. If it was ever set to a non-zero value, it was before GDB 2.8. It doesn't seem to have any useful function.	33 years ago
Jim Kingdon	29c6dce249	* infrun.c: Remove step_resume_{duplicate,shadow}. Replace step_resume_break_address with step_resume_breakpoint (now local to wait_for_inferior). ({insert,remove}_step_breakpoint): Remove. (wait_for_inferior): Set step resume break with set_momentary_breakpoint. Test hitting it with bpstat_stop_status and bpstat_what (stop_step_resume_break removed). * breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct which includes previous return value as main_action, and a step_resume bit. * breakpoint.c (delete_breakpoint): If breakpoint was inserted, and there is another breakpoint there, insert it. * infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use a few more gotos. Various: Clean up and add comments.	34 years ago
Jim Kingdon	fe67503857	* infrun.c: Remove step_resume_{duplicate,shadow}. Replace step_resume_break_address with step_resume_breakpoint (now local to wait_for_inferior). ({insert,remove}_step_breakpoint): Remove. (wait_for_inferior): Set step resume break with set_momentary_breakpoint. Test hitting it with bpstat_stop_status and bpstat_what (stop_step_resume_break removed). * breakpoint.{h,c}, infrun.c: Return value from bpstat_what now struct which includes previous return value as main_action, and a step_resume bit. * breakpoint.c (delete_breakpoint): If breakpoint was inserted, and there is another breakpoint there, insert it. * infrun.c (wait_for_inferior): Rearrange the spaghetti a bit. Use a few more gotos. Various: Clean up and add comments.	34 years ago
Jim Kingdon	fee44494f1	* infrun.c [TDESC]: Remove remaining tdesc code (see ChangeLog for Wed Nov 13 16:45:13 1991).	34 years ago

1 2 3

145 Commits (74b7792f0fcae41f7c7da524527b7261a3fd68c4)