2013-03-20 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_final_link_relocate): Avoid emitting a
dynamic reloc for symbols with dynindx == -1.
(allocate_dynrelocs_for_symbol): Avoid allocating space for a
dynamic reloc for symbols with dynindx == -1.
2013-03-20 Will Newton <will.newton@linaro.org>
* elf32-arm.c (elf32_arm_final_link_relocate): Avoid emitting a
dynamic reloc for symbols with dynindx == -1.
(allocate_dynrelocs_for_symbol): Avoid allocating space for a
dynamic reloc for symbols with dynindx == -1.
Hyphens are much more common than underscores in command names.
gdb/
2013-03-27 Pedro Alves <palves@redhat.com>
* coff-pe-read.c (_initialize_coff_pe_read): Rename "set debug
coff_pe_read" command to "set debug coff-pe-read".
The "set tcp connect-timeout" variable is unsigned:
/* Timeout period for connections, in seconds. */
static unsigned int tcp_retry_limit = 15;
And used like:
/* Check for timeout. */
if (*polls > tcp_retry_limit * POLL_INTERVAL)
{
errno = ETIMEDOUT;
return -1;
}
Which made me stop and look over why is it that 'polls' is signed.
What I found is there's really no reason.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* ser-tcp.c (wait_for_connect): Make 'polls' parameter unsigned.
(net_open): Make 'polls' local unsigned.
It makes no sense to talk about an "unlimited" address size in this
context.
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is 0.
(gdb) set remoteaddresssize 0
(gdb) show remoteaddresssize
The maximum size of the address (in bits) in a memory packet is unlimited.
"set remoteaddresssize 0" mapping to UINT_MAX means you can't
force gdb through this path twice in the same GDB run:
static CORE_ADDR
remote_address_masked (CORE_ADDR addr)
{
unsigned int address_size = remote_address_size;
/* If "remoteaddresssize" was not set, default to target address size. */
if (!address_size)
address_size = gdbarch_addr_bit (target_gdbarch ());
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* remote.c (_initialize_remote): Make "set remoteaddresssize"
a zuinteger command instead of uinteger.
The "set record full insn-number-max" command is an uinteger command.
If the variable that holds the maximum count of logged instructions is
unsigned, it's better if the variable that holds the current number of
logged instructions is also unsigned. Looking over the code, there's
no case the variable could end up negative.
Then, tests like "if (record_full_insn_max_num)" are always true,
because being a uinteger command means that "set record full
insn-number-max 0" is actually mapped to UINT_MAX internally. IOW,
the command's variable is never 0. The checks might make some sense
if 0 wasn't mapped to UINT_MAX, and 0 meant unlimited, but, that's not
how things work.
Tested on x86_64 Fedora 17.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* record-full.c (record_full_insn_num): Make it unsigned.
(record_full_check_insn_num, record_full_message)
(record_full_registers_change, record_full_xfer_partial): Remove
record_full_insn_max_num check (it's always != 0).
(record_full_info, record_full_restore): Use %u as format string.
(): Use %u as format string.
(set_record_full_insn_max_num): Remove record_full_insn_max_num
check (it's always != 0).
It doesn't make sense to request an "unlimited" dcache. You want to
configure the cache with specific lines and length of lines.
It doesn't actually work anyway:
(gdb) set dcache line-size 0
Invalid dcache line size: 4294967295 (must be power of 2).
(gdb) set dcache size 0
(gdb) show dcache size
Number of dcache lines is unlimited.
(gdb) info dcache
Dcache 4294967295 lines of 64 bytes each.
No data cache available.
The code already has guards in place to forbid 0s:
static void
set_dcache_size (char *args, int from_tty,
struct cmd_list_element *c)
{
if (dcache_size == 0)
{
dcache_size = DCACHE_DEFAULT_SIZE;
error (_("Dcache size must be greater than 0."));
}
if (last_cache)
dcache_invalidate (last_cache);
}
static void
set_dcache_line_size (char *args, int from_tty,
struct cmd_list_element *c)
{
if (dcache_line_size < 2
|| (dcache_line_size & (dcache_line_size - 1)) != 0)
{
unsigned d = dcache_line_size;
dcache_line_size = DCACHE_DEFAULT_LINE_SIZE;
error (_("Invalid dcache line size: %u (must be power of 2)."), d);
}
if (last_cache)
dcache_invalidate (last_cache);
}
So we now get:
(gdb) set dcache line-size 0
Invalid dcache line size: 0 (must be power of 2).
(gdb) set dcache size 0
Dcache size must be greater than 0.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* dcache.c (_initialize_dcache): Make the "set dcache line-size"
and "set dcache size" commands zuinteger instead of uinteger.
Being a uinteger means you revert back to having GDB decide the
version. It makes no sense to have an "unlimited" version.
(gdb) show cris-version
The current CRIS version is 0.
(gdb) set cris-version 0
(gdb) show cris-version
The current CRIS version is unlimited.
(gdb)
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* cris-tdep.c (_initialize_cris_tdep): Make the "set cris-version"
command zuinteger instead of uinteger.
Being a uinteger means you can't disable debug output after enabling it...
(gdb) show debug coff_pe_read
Coff PE read debugging is 0.
(gdb) set debug coff_pe_read 0
(gdb) show debug coff_pe_read
Coff PE read debugging is unlimited.
(gdb)
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* coff-pe-read.c (_initialize_coff_pe_read): Make the command
zuinteger instead of uinteger.
When I tried running the btrace tests, I noticed something odd in the gdb.log file:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.x
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c:1
1 /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace22343.c: No such file or directory.
^^^^^^^^^^^^^^^^^^^^^^^^^
(gdb) record btrace
Target does not support branch tracing.
(gdb) testcase ../../../src/gdb/testsuite/gdb.btrace/enable.exp completed in 0 seconds
I knew that the btrace tests on my machine weren't supposed to work,
but still, that error made me wonder if the test had something broken,
and waste a few minutes looking up where that is coming from.
The issue is that the btrace detection deletes the source file right
after compiling it, and before GDB has a chance to open it. It's
really harmless, but I'd rather spare others from going through the
same exercise.
We now get the regular:
(gdb) run
Starting program: /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.x
...
Breakpoint 1, main () at /home/pedro/gdb/mygit/build/gdb/testsuite/gdb.btrace/btrace24210.c:1
1 int main(void) { return 0; }
...
gdb/testsuite/
2013-03-26 Pedro Alves <palves@redhat.com>
* lib/gdb.exp (skip_btrace_tests): Delay deleting the source file
until after GDB has run.
While the commands are uinteger, the target interfaces are limited to
INT_MAX. Don't let the user request more than we can handle.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* record.c (record_insn_history_size_setshow_var)
(record_call_history_size_setshow_var): New globals.
(command_size_to_target_size): New function.
(cmd_record_insn_history, cmd_record_call_history): Use
command_size_to_target_size instead of cast.
(validate_history_size, set_record_insn_history_size)
(set_record_call_history_size): New functions.
(_initialize_record): Install set_record_insn_history_size and
set_record_call_history_size as "set" hooks of "set record
instruction-history-size" and "set record
function-call-history-size".
There's no need to put the majority of the logic into the 3rd arg of the
AC_ARG_ENABLE. Coupled with the lack of indentation, it makes it hard to
follow, error prone to update, and duplicates code (with the 4th arg).
So pull the logic out of the 3rd arg and outside of the AC_ARG_ENABLE
macro. This allows us to gut the 4th arg entirely, merge with the code
that followed the macro, and fix bugs related to the new dv-sockser in
the process.
Hopefully building the various sims with the default sim-hardware
settings, as well as with explicit --{dis,en}able-sim-hardware flags,
should all just work now.
Ref: http://www.sourceware.org/ml/gdb-patches/2002-08/msg00486.html
We've long since imported a newer readline, no need to use the old
compatibility variable anymore.
Tested on x86_64 Fedora 17.
gdb/
2013-03-26 Pedro Alves <palves@redhat.com>
* top.c (gdb_rl_operate_and_get_next): Replace max_input_history
use with history_max_entries use. Remove FIXME note.
2013-03-26 Douglas B Rupp <rupp@gnat.com>
* config/tc-ia64.c (emit_one_bundle): Move last_slot adjustment
after fixup.
gas/testsuite/
2013-03-26 Douglas B Rupp <rupp@adacore.com
* gas/ia64/ia64.exp: Add new test reloc-mlx
* gas/ia64/reloc-mlx.[sd]: New test for X-unit reloc.
* gas/ia64/pcrel.d: Fix output for X-unit reloc.
Reading symbols from /bin/true...(no debugging symbols found)...done.
(gdb) b _start
Function "_start" not defined.
Make breakpoint pending on future shared library load? (y or [n]) y
Breakpoint 1 (_start) pending.
(gdb) r
Starting program: /bin/true
Breakpoint 1, 0x00000039a0400af0 in _start () from /lib64/ld-linux-x86-64.so.2
(gdb) rec b
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y
Starting program: /bin/true
Breakpoint 1, 0x00000039a0400af0 in _start () from /lib64/ld-linux-x86-64.so.2
(gdb) rec b
gdb/record-btrace.c:154: internal-error: record_btrace_open:
Assertion `record_btrace_thread_observer == NULL' failed.
A problem internal to GDB has been detected,
further debugging may prove unreliable.
Quit this debugging session? (y or n)
gdb/
* record-btrace.c (record_btrace_close): Call
record_btrace_auto_disable.
testsuite/
* gdb.btrace/enable.exp: Add regression test.
* c-exp.y (exp): Add new productions for destructors after '.' and
'->'.
(write_destructor_name): New function.
gdb/testsuite
* gdb.cp/m-static.exp: Add destructor-printing tests.
usual common symbols as well as for dynamic. Add poldbfd param.
Save old bfd. Adjust callers.
(_bfd_elf_add_default_symbol): Add poldbfd param. Pass "section"
and "value" by value, not pointer. Adjust caller.
(elf_link_add_object_symbols): Combine undef_bfd and old_bfd vars.
Delete code to set same. Use old_bfd and old_alignment from
_bfd_elf_merge_symbol instead. Add default symbol before
alignment and size checks. Wrap overlong lines.
(_bfd_elf_init_reloc_shdr): Delete.
* elf.c (_bfd_elf_init_reloc_shdr): Make static.
* elf64-x86-64.c (elf_x86_64_merge_symbol): Trim parameters to
just what is needed.
* elflink.c (_bfd_elf_merge_symbol): Update bed->merge_symbol call.
Will Newton
Pedro Alves
Markus Metzger
Pierre Muller
Keith Seitz
gdbadmin
Alan Modra
Joel Brobecker
Nick Clifton
Mike Frysinger
Yao Qi
Tristan Gingold
Doug Evans
Kai Tietz
Tom Tromey
Joel Sherrill