binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Fred Fish	948a9d9233	* alpha-nat.c (fetch_core_registers): Match Sep 4 gdbcore.h prototype change for core_read_registers in struct core_fns. * core-regset.c (fetch_core_registers): Ditto & add prototype. * core-sol2.c (fetch_core_registers): Ditto & add prototype. * i386aix-nat.c (fetch_core_registers): Ditto & add prototype. * i386b-nat.c (fetch_core_registers): Ditto. * i386mach-nat.c (fetch_core_registers): Ditto & add prototype. * irix4-nat.c (fetch_core_registers): Ditto. * irix5-nat.c (fetch_core_registers): Ditto. * lynx-nat.c (fetch_core_registers): Ditto & add prototype. * m68knbsd-nat.c (fetch_core_registers): Ditto. * mips-nat.c (fetch_core_registers): Ditto & add prototype. * rs6000-nat.c (fetch_core_registers): Ditto. * sparc-nat.c (fetch_core_registers): Ditto. * sun3-nat.c (fetch_core_registers): Ditto & add prototype. * ultra3-nat.c (fetch_core_registers): Ditto & add prototype. * alpha-nat.c (register_addr): Match Sep 4 gdbcore.h prototype change. * delta68-nat.c (register_addr): Ditto. * gdbserver/low-linux.c (register_addr): Ditto. * gdbserver/low-hppabsd.c (register_addr): Ditto. * i386m3-nat.c (register_addr): Ditto. * mips-nat.c (register_addr): Ditto. * ultra3-nat.c (register_addr): Ditto.	30 years ago
Stu Grossman	647e52ea3a	Changes from the FSF for Hurd thread support.	31 years ago
Fred Fish	3730a0edf1	* lynx-nat.c, irix4-nat.c, sparc-nat.c: Include gdbcore.h to get "struct core_fns" defined. * Makefile.in (lynx-nat.o, irix4-nat.o, sparc-nat.o): Are dependant upon gdbcore_h.	31 years ago
Fred Fish	a1df8e780c	* coredep.c: Renamed to core-aout.c * core-svr4.c: Renamed to core-regset.c * Makefile.in (ALLDEPFILES): Account for renamings. * corelow.c (core_file_fns): Add, points to chain of structs. (add_core_fns): New function to build chain of structs. (get_core_registers): Modify to search core functions chain and call appropriate fetch_core_registers function based on core file flavour. * gdbcore.h (fetch_core_registers): Remove declaration. (struct core_fns): Define struct for core function info. * i386m3-nat.c: Update comment for filename change (coredep->core-aout) * a68v-nat.c (fetch_core_registers): Remove stub, not needed now. * alpha-nat.c (fetch_core_registers): Make static. (alpha_core_fns, _initialize_core_alpha): New struct and func. * core-aout.c (fetch_core_registers): Make static (aout_core_fns, _initialize_core_aout): New struct and func. * core-regset.c (fetch_core_registers): Make static. (regset_core_fns, _initialize_core_regset): New struct and func. * core-sol2.c (fetch_core_registers): Make static. (solaris_core_fns, _initialize_core_solaris): New struct and func. * hp300ux-nat.c (fetch_core_registers): Make static. (hp300ux_core_fns, _initialize_core_hp300ux): New struct and func. * i386aix-nat.c (fetch_core_registers): Make static. (i386aix_core_fns, _initialize_core_i386aix): New struct and func. * i386mach-nat.c (fetch_core_registers: Make static. (i386mach_core_fns, _initialize_core_i386mach): New struct and func. * irix4-nat.c (fetch_core_registers): Make static. (irix4_core_fns, _initialize_core_irix4): New struct and func. * irix5-nat.c (fetch_core_registers): (irix5_core_fns, _initialize_core_irix5): New struct and func. * lynx-nat.c (fetch_core_registers): Make static. (lynx_core_fns, _initialize_core_lynx): New struct and func. * mips-nat.c (fetch_core_registers): Make static. (mips_core_fns, _initialize_core_mips): New struct and func. * ns32km3-nat.c (fetch_core_registers): Remove stub. * rs6000-nat.c (fetch_core_registers): Make static. (rs6000_core_fns, _initialize_core_rs6000): New struct and func. * sparc-nat.c (fetch_core_registers): Make static. (sparc_core_fns, _initialize_core_sparc): New struct and func. * sun3-nat.c (fetch_core_registers): (sun3_core_fns, _initialize_core_sun3): New struct and func. * sun386-nat.c (fetch_core_registers): Remove stub. * ultra3-nat.c (fetch_core_registers): Make static. (ultra3_core_fns, _initialize_core_ultra3): New struct and func. * config/gould/pn.mh (XDEPFILES), config/i386/fbsd.mh (NATDEPFILES), config/i386/i386bsd.mh (NATDEPFILES), config/i386/i386m3.mh (XDEPFILES), config/i386/i386sco.mh (NATDEPFILES), config/i386/i386sco4.mh (NATDEPFILES), config/i386/i386v.mh (NATDEPFILES), config/i386/i386v32.mh (NATDEPFILES), config/i386/nbsd.mh (NATDEPFILES), config/i386/ptx.mh (XDEPFILES), config/i386/ptx4.mh (XDEPFILES), config/i386/symmetry.mh (NATDEPFILES), config/m68k/3b1.mh (XDEPFILES), config/m68k/cisco.mt (TDEPFILES), config/m68k/delta68.mh (NATDEPFILES), config/m68k/dpx2.mh (NATDEPFILES), config/m68k/hp300bsd.mh (NATDEPFILES), config/m68k/hp300hpux.mh (NATDEPFILES), config/m68k/isi.mh (XDEPFILES), config/m68k/news.mh (NATDEPFILES), config/m68k/news1000.mh (XDEPFILES), config/m88k/cxux.mh (NATDEPFILES), config/m88k/delta88.mh (NATDEPFILES), config/mips/littlemips.mh (XDEPFILES), config/mips/mipsm3.mh (XDEPFILES), config/ns32k/merlin.mh (XDEPFILES), config/ns32k/nbsd.mh (NATDEPFILES), config/ns32k/ns32km3.mh (NATDEPFILES), config/pa/hppabsd.mh (NATDEPFILES), config/pa/hppahpux.mh (NATDEPFILES), config/romp/rtbsd.mh (XDEPFILES), config/tahoe/tahoe.mh (XDEPFILES), config/vax/vaxbsd.mh (XDEPFILES), config/vax/vaxult.mh (NATDEPFILES), config/vax/vaxult2.mh (NATDEPFILES), Account for coredep.o to core-aout.o name change. * config/i386/i386dgux (NATDEPFILES), config/i386/i386sol2.mh (NATDEPFILES), config/i386/i386v4.mh (NATDEPFILES), config/i386/linux.mh (NATDEPFILES), config/i386/ncr3000.mh (NATDEPFILES), config/m68k/m68kv4.mh (NATDEPFILES), config/m88k/delta88v4.mh (NATDEPFILES), config/mips/mipsv4.mh (NATDEPFILES), Account for core-svr4.o to core-regset.o name change.	31 years ago
Fred Fish	6c9638b444	Update FSF address.	31 years ago
Jeff Law	b339391255	* lynx-nat.c (child_wait): Handle threads exiting.	32 years ago
Jeff Law	f8c90568d5	* lynx-nat.c (child_thread_alive): New function. Somehow I forgot to check this in with all the other thread_alive changes.	32 years ago
Jeff Law	5c54124bab	* lynx-nat.c (child_wait): A thread_id of zero from wait apparently means the process is single threaded, so there's no need to add it to the thread list. Handle case where multi-threaded process reverts back to a single-threaded process.	32 years ago
Jeff Law	48f4903f36	* infrun.c (wait_for_inferior): When we hit a breakpoint for the wrong thread, make sure to write the fixed PC value into the thread that stopped. Restart all threads after single stepping over a breakpoint for a different thread. * breakpoint.c (set_momentary_breakpoint): Make momentary breakpoints thread specific in a multi-threaded program. * lynx-nat.c (child_resume): Add some comments. Correctly choose between the single and multi-threaded step and continue ptrace calls. Some of the lynx-6100 single stepping fixes.	32 years ago
Jeff Law	1657d50b38	* lynx-nat.c (child_wait): Don't restart new threads and loop to the top of child_wait; let the machine independent code in wait_for_inferior deal with new thread notifications. lynx-6100 (partial) Fixes SEGV when multi-threaded program hits a breakpoint in a new thread.	32 years ago
Ian Lance Taylor	60e86a677e	* lynx-nat.c (child_wait): Correct handling of byte reversed SPARC Lynx wait status. (fetch_core_registers): Don't try to fetch a register if regmap maps it to -1. * sparc-tdep.c (sparc_frame_find_saved_regs): Use FRAME_SAVED_I0 and FRAME_SAVED_L0 when setting saved_regs_addr. SPARC Lynx stores the registers in a weird order. These patches make SPARC Lynx gdb usable, though it still has problems.	32 years ago
Jim Kingdon	a5732a3067	* lynx-nat.c (child_wait): Use status.w_status, not status, in arithmetic. status is a `union wait'.	32 years ago
Jim Kingdon	6adffcd857	* config/nm-lynx.h (PTRACE_ARG3_TYPE): Define to int, not char . lynx-nat.c (child_wait): Pass fourth argument to ptrace.	32 years ago
Jim Kingdon	1e75b5f530	* inflow.c (set_sigint_trap, clear_sigint_trap): Check for attach_flag (this check was performed by the callers). Also check inferior_thisrun_terminal. * inftarg.c (child_wait), lynx-nat.c (child_wait), procfs.c (wait_fd), symm-nat.c (child_wait): Don't check attach_flag in deciding whether to call set_sigint_trap and clear_sigint_trap.	32 years ago
Stu Grossman	320f93f714	* dbxread.c, partial-stab.h (near N_SO): SO stabs with blank names mean end of .o file. * infrun.c (wait_for_inferior): Clean up multi-thread logic near top of routine. Handle new thread notification cleanly. * lynx-nat.c (child_wait): General cleanups, handle new LynxOS thread notification scheme. * (child_resume): General cleanups, handle resumption of all threads properly.	33 years ago
Stu Grossman	2e6784a89f	* configure.in: Add nlm subdir to configdirs for alpha--netware target. defs.h (enum language): Add language_asm. * findvar.c (read_register_bytes read_register_gen write_register_bytes read_register read_register_pid write_register write_register_pid supply_register): Move multi- thread handling down into these routines. Create XXX_pid routines that allow register references to specify the pid. * findvar.c infcmd.c (read_pc read_pc_pid write_pc write_pc_pid read_sp write_sp read_fp write_fp): Move these routines from infcmd to findvar to centralize the whole mess. * i386-nlmstub.c: Portability fixes. * infptrace.c (child_resume): Conditionalize to allow other natives to override it. Remove PIDGET gubbish, it's no longer necessary. * infrun.c (wait_for_inferior): Put registers_changed() before target_wait() to speed up remote debugging. * Replace code that reads registers from other threads with much nicer looking new function calls (see changes to findvar.c). * Don't skip prologues if debugging assembly source. * lynx-nat.c (child_resume): Lynx now needs it's own version of child_resume to handle multi-thread debugging properly. * remote.c: Add O response to get console output from target. * (readchar): Add timeout parameter. Handle SERIAL_EOF and SERIAL_ERROR here to simplify callers. * Change static var timeout to remote_timeout. * (fromhex): Remove unnecessary return -1 at end of routine. * (remote_wait): Turn this into a big switch statement. Add support for O response. * (putpkt): Remove unnecessary handling of SERIAL_EOF/ERROR. * (getpkt): Split getpkt into two parts. read_frame deals with all formatting issues, run-length encoding, and framing. getpkt now handles error recovery, and frame detection. * ser-tcp.c (tcp_readchar): Handle EINTR from read(). * ser-unix.c (hardwire_raw): Set CLOCAL so that we ignore modem control. (hardwire_readchar): Handle EINTR from read(). * symfile.c (deduce_language_from_filename): Add support for .s files. * config/nm-lynx.h: Define CHILD_WAIT so that lynx-nat.c can override infptrace's child_wait. * config/rs6000/rs6000lynx.mh: Use xm-rs6000ly.h & nm-rs6000ly.h instead of XXXlynx.h. * config/rs6000/rs6000lynx.mt: Use tm-rs6000ly.h instead of tm-rs6000lynx.h. * nlm/gdbserve.c: Portability fixes.	33 years ago
Stan Shebs	aa17521656	Wed Apr 27 16:33:51 1994 Stan Shebs (shebs@andros.cygnus.com) * lynx-nat.c (CANNOT_STORE_REGISTER): Add a fallback definition for Lynx platforms that need it. * config/nm-lynx.h (__LYNXOS): Define if not already defined.	33 years ago
Stu Grossman	790a14a88b	* lynx-nat.c: Restore regmap structure for SPARC. It's needed for core files.	33 years ago
Stu Grossman	d87d7b10af	* configure.in: Add Lynx/rs6000 support. * lynx-nat.c: Clean up some Sparc stuff. Clean up ptrace error messages. Add rs6000 support. Don't try to modify unwritable registers. * rs6000-nat.c: Move lots of native dependent stuff (like core file support) from rs6000-tdep.c & xcoffexec.c to here. * rs6000-tdep.c: Move native dependent stuff to nat.c. * xcoffexec.c: Move native dependent stuff to nat.c. * config/rs6000/nm-rs6000.h: Move defs of SOLIB_* macros to here from tm file. * config/rs6000/tm-rs6000.h: Remove defs of SOLIB_* funcs, cuz they're really native. * config/rs6000/tm-rs6000lynx.h, config/rs6000/xm-rs6000lynx.h: New files to support Lynx/rs6000.	33 years ago
Stu Grossman	e90445c997	* lynx-nat.c (fetch_core_registers): Load the I & L regs for the Sparc from the stack.	33 years ago
Stu Grossman	8bf94f44bc	* sparc-tdep.c, lynx-nat.c, config/sparc/tm-sparc.h, config/sparc/tm-sparclynx.h: Move defs of FRAME_SAVED_I0/L0 to tm-sparc.h so they can be overridden if necessary.	33 years ago
Stu Grossman	d575ddc0ef	* lynx-nat.c: Add Sparc support. * sparcly-nat.c: Remove. It's useless. * config/sparc/nm-sparclynx.h: Rewrite. * config/sparc/sparclynx.mh (NATDEPFILES): Replace sparcly-nat.o with lynx-nat.o * config/sparc/tm-sparclynx.h: Rewrite.	33 years ago
Stan Shebs	658821b9fa	Fri Jan 14 17:12:28 1994 Stan Shebs (shebs@andros.cygnus.com) * lynx-nat.c (sys/wait.h): Don't use absolute pathname.	33 years ago
Jim Kingdon	2919ae5a6a	* lynx-nat.c (child_wait): Fix thinkos in struct target_waitstatus changes (status -> ourstatus; declare status, etc.). * config/nm-lynx.h: Fix child_wait prototype and include target.h.	33 years ago
Jim Kingdon	67ac975911	* target.h: Add enum target_waitkind, enum target_signal, and struct target_waitstatus. Change status argument to target_wait to be struct target_waitstatus * instead of int . target.h, infrun.c, all targets: Change type of signal arguments to resume(), proceed(), and target_resume() from int to enum target_signal. * All targets (_wait, _resume): Change accordingly. * infcmd.c (program_info, signal_command), throughout infrun.c, * fork-child.c, solib.c, hppa-tdep.c, osfsolib.c: Use this stuff. * convex-xdep.c, convex-tdep.c: Add FIXME's (getting the Convex signal code stuff right with the new signals would be non-trivial). * inferior.h (stop_signal): Make it enum target_signal not int. * target.c, target.h (target_signal_to_string, target_signal_to_name, target_signal_from_name): New functions. * inftarg.c, target.h (target_signal_to_host, target_signal_from_host, store_waitstatus): New functions. * procfs.c (procfs_notice_signals): Use them. * i960-tdep.c (i960_fault_to_signal): New function, to replace print_fault. * config/i960/tm-i960.h: Don't define PRINT_RANDOM_SIGNAL.	33 years ago
Stu Grossman	d3225ea0ac	* i386ly-nat.c, i386lynx-nat.c, m68kly-nat.c: Remove. Move common code into lynx-nat.c. * lynx-nat.c: New module. Contains portable code for Lynx native stuff (mostly ptrace related). * config/i386/i386lynx.mh (NATDEPFILES): i386ly-nat.o -> lynx-nat.o * config/m68k/m68klynx.mh (NATDEPFILES): i386ly-nat.o -> lynx-nat.o * config/nm-lynx.h, config/tm-lynx.h: New files to contain non-architecture specific native and target defs. * config/i386/nm-i386lynx.h, config/i386/tm-i386lynx.h, config/m68k/nm-m68klynx.h, config/m68k/tm-m68klynx.h: Move all (arch) portable stuff into ../{tm nm}-lynx.h.	33 years ago

26 Commits (69312dac86df4f919d38e10cb0244af881678ac1)