binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Jozef Lawrynowicz	99fabbc973	Support SHF_GNU_RETAIN ELF section flag The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ \| Name \| Value \| +-------------------------------------+ \| SHF_GNU_RETAIN \| 0x200000 (1 << 21) \| +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test.	6 years ago
Przemyslaw Wirkus	e64441b14c	aarch64: Extract Condition flag manipulation feature from Armv8.4-A Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A. Please note that FLAGM stays a Armv8.4-A feature but now can be assigned to other architectures or CPUs. New -march option +flagm is added to enable independently this feature.	6 years ago
Spencer E. Olson	9372689d72	Add support for the LMBD (left-most bit detect) instruction to the PRU assembler. include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect) gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect) * testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit	6 years ago
Przemyslaw Wirkus	8edca81ece	aarch64: Limit Rt register number for LS64 load/store instructions Atomic 64-byte load/store instructions limit Rt register number to values matching below condition (register <Xt> number must be even and <= 22): if Rt<4:3> == '11' \|\| Rt<0> == '1' then UNDEFINED; This patch adds check if Rt fulfills above requirement. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i	6 years ago
Przemyslaw Wirkus	af1bd771fc	aarch64: Extract Pointer Authentication feature from Armv8.3-A Extract PAC (Pointer Authentication) feature from Armv8.3-A. Please note that PAC stays a Armv8.3-A feature but now can be assigned to other architectures or CPUs.	6 years ago
Przemyslaw Wirkus	55cc012834	aarch64: Update feature RAS system registers This patch: + updates RAS feature system registers with new RAS 1.1 regs. + extends RAS/RAS 1.1 support for all architecture levels of Armv8-A. Please note that early Armv8-A architectures do not officially support RAS extension. Rationale of the patch: To ease development so that user-friendly RAS system registers operands can be used. Certain use cases require developers to enable only more generic architecture (e.g. -march=armv8-a) during system development. Users must use RAS extension registers bearing in mind that system they use must support it. The RAS (Reliability, Availability, Serviceability) extension is a system-level extension that defines a number of system registers. RAS 1.1 (FEAT_RASv1p1) introduces five new system registers: ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and ERXPFGF_EL1. For details see [0]. [0] https://developer.arm.com/docs/ddi0595/i/	6 years ago
Przemyslaw Wirkus	fd65497db4	[PATCH][GAS] aarch64: Add atomic 64-byte load/store instructions for Armv8.7 Armv8.7 architecture introduces the "accelerator extension", aka load/store of 64 bytes. New atomic load/store instructions are: LD64B, ST64B, ST64BV and ST64BV0. This patch adds: + New feature +ls64 to -march command line. + New atomic load/store instructions associated with above feature. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i	6 years ago
Przemyslaw Wirkus	3a959875ea	[PATCH] aarch64: Update missing ChangeLog for AArch64 commits Patch with missing ChangeLog entries for GAS AArch64 files.	6 years ago
H.J. Lu	b0ab069373	x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 X86 ISA markers are updated: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 GNU_PROPERTY_X86_ISA_1_BASELINE is added and GNU_PROPERTY_X86_ISA_1_V[234] are updated: #define GNU_PROPERTY_X86_ISA_1_BASELINE (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 2) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 3) Add -z x86-64-baseline linker command line option to mark x86-64-baseline ISA level as needed. bfd/ PR gas/26703 * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_BASELINE for -z x86-64-baseline. binutils/ PR gas/26703 * readelf.c (decode_x86_isa): Handle * GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (output_insn): Update for GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/property-11.d: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_BASELINE): New. (GNU_PROPERTY_X86_ISA_1_V2): Uppdated. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-baseline. * ld.texi: Document -z x86-64-baseline. * emulparams/x86-64-level.sh: Handle -z x86-64-baseline. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-isa4. * testsuite/ld-i386/property-x86-isa4.d: New file. * testsuite/ld-x86-64/property-x86-isa4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa4.d: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-isa4 and property-x86-isa4-x32.	6 years ago
Cooper Qu	9d1ccf22fd	CSKY: Add version flag in eflag and fix bug in disassembling register. gas/ * config/tc-csky.c (md_begin): Add version flag in eflag. include/ * opcode/csky.h (CSKY_VERSION_V1): Define, currently used. (CSKY_VERSION_V2): Define. (CSKY_VERSION_V3): Define. Change-Id: Iafe3a9ce6fe544880a225b9fae439275a828bb34	6 years ago
Tom Tromey	0d01fbe64f	Remove libctf/mkerrors.sed This patch removes libctf/mkerrors.sed, replacing it with a macro in ctf-api.h. This simplifies the build and avoids possible unportable code in the sed script. 2020-10-21 Tom Tromey <tromey@adacore.com> * ctf-api.h (_CTF_ERRORS): New macro. libctf/ChangeLog 2020-10-21 Tom Tromey <tromey@adacore.com> * mkerrors.sed: Remove. * ctf-error.c (_CTF_FIRST): New define. (_CTF_ITEM): Define this, not _CTF_STR. (_ctf_errlist, _ctf_erridx): Use _CTF_ERRORS. (ERRSTRFIELD): Rewrite. (ERRSTRFIELD1): Remove. * Makefile.in: Rebuild. * Makefile.am (BUILT_SOURCES): Remove. (ctf-error.h): Remove.	6 years ago
Nelson Chu	02dd9d2568	RISC-V: Support GNU indirect functions. Generally, glibc dynamic linker should have two ways to deal with ifunc - one is to handle the IRELATIVE relocations for the non-preemtive ifunc symbols, the other is to handle the R_RISCV_32/64 and R_RISCV_JUMP_SLOT relocations with the STT_IFUNC preemtive symbols. No matter which method is used, both of them should get the resolved ifunc symbols at runtime. Therefore, linker needs to generate the correct dynamic relocations for ifunc to make sure the the dynamic linker works well. For now, there are thirteen relocations are supported for ifunc in GNU ld, * R_RISCV_CALL and R_RISCV_CALL_PLT: The RISC-V compiler won't generate R_RISCV_JAL directly to jump to an ifunc. Besides, we disable the relaxations for the relocation referenced to ifunc, so just handling the R_RISCV_CALL and R_RISCV_CALL_PLT should be enough. Linker should generate a .plt entry and a .got.plt entry for it, and also needs to insert a dynamic IRELATIVE in the .got.plt enrty, or insert a R_RISCV_JUMP_SLOT when generating shared library. * R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO12_I/S: LA/LLA pattern with local fPIC ifunc symbol, or any non-PIC ifunc symbol. The PC-relative relocation. The current linker will deal with them in the same way as R_RISCV_CALL_PLT. * R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO12_I/S: LA pattern with global PIC ifunc symbol. Linker should insert a dynamic IRELATIVE in the .got entry, or insert a R_RISCV_32/64 when generating shared library. * R_RISCV_32 and R_RISCV_64: Store the ifunc symbol into the data section. Linker should insert a dynamic IRELATIVE in the data section, or insert a R_RISCV_32/64 when generating shared library. * R_RISCV_HI20 and R_RISCV_LO12_I/S: The LUI + ADDI/LW/SW patterns. The absolute access relocation. The medlow model without the -fPIC compiler option should generate them. The ld ifunc testsuites "Build pr23169a" and "Build pr23169d" need the relocations, they are in the ld/testsuite/ld-ifunc/, and need compiler support. However, we also made some optimizations with reference to x86, * If GOT and PLT relocations refer to the same ifunc symbol when generating pie, then they can actually share a .got entry without creating two entries to store the same value and relocation. * If GOT, PLT and DATA relocations refer to the same ifunc symbol when generating position dependency executable, then linker will fill the address of .plt entry into the corresponding .got entry and data section, without insert any dynamic relocations for the GOT and DATA relocations. For the ifunc testcases, there are three types of them, 1. ifunc-reloc-: Only check the single type of relocation refers to ifunc symbol. ifunc-reloc-call: R_RISCV_CALL and R_RISCV_CALL_PLT. * ifunc-reloc-data: R_RISCV_32 and R_RISCV_64. * ifunc-reloc-got: R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO_I/S. * ifunc-reloc-pcrel: R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO_I/S. 2. ifunc-[nonplt\|plt]-: If we don't have PLT relocs, then don't need to create the PLT and it's .plt entries. ifunc-nonplt: Combine R_RISCV_GOT_HI20 and R_RISCV_32/64. * ifunc-plt: Combine all ifunc relocations. 3. ifunc-seperate-: If we link the ifunc caller and resolver into the same module (link the objects), then the results are the same as the ifunc-reloc- and ifunc-[noplt\|plt]-* testcases. Consider the cases that the ifunc callers and resolver are in the different modules, that is, we compile the ifunc resolver to the shared library first, and then link it with the ifunc callers. The output of ifunc callers should be the same as the normal STT_FUNC cases, and the shared ifunc resolver should define the symbols as STT_IFUNC. The R_RISCV_PCREL_HI20 reloc is special. It should be linked and resolved locally, so if the ifunc resolver is defined in other modules (other shared libraries), then the R_RISCV_PCREL_HI20 is unresolvable, and linker should issue an unresolvable reloc error. bfd/ * elfnn-riscv.c: Include "objalloc.h" since we need objalloc_alloc. (riscv_elf_link_hash_table): Add loc_hash_table and loc_hash_memory for local STT_GNU_IFUNC symbols. (riscv_elf_got_plt_val): Removed. (riscv_elf_local_htab_hash, riscv_elf_local_htab_eq): New functions. Use to compare local hash entries. (riscv_elf_get_local_sym_hash): New function. Find a hash entry for local symbol, and create a new one if needed. (riscv_elf_link_hash_table_free): New function. Destroy an riscv elf linker hash table. (riscv_elf_link_hash_table_create): Create hash table for local ifunc. (riscv_elf_check_relocs): Create a fake global symbol to track the local ifunc symbol. Add support to check and handle the relocations reference to ifunc symbols. (allocate_dynrelocs): Let allocate_ifunc_dynrelocs and allocate_local_ifunc_dynrelocs to handle the ifunc symbols if they are defined and referenced in a non-shared object. (allocate_ifunc_dynrelocs): New function. Allocate space in .plt, .got and associated reloc sections for ifunc dynamic relocs. (allocate_local_ifunc_dynrelocs): Likewise, but for local ifunc dynamic relocs. (riscv_elf_relocate_section): Add support to handle the relocation referenced to ifunc symbols. (riscv_elf_size_dynamic_sections): Updated. (riscv_elf_adjust_dynamic_symbol): Updated. (riscv_elf_finish_dynamic_symbol): Finish up the ifunc handling, including fill the PLT and GOT entries for ifunc symbols. (riscv_elf_finish_local_dynamic_symbol): New function. Called by riscv_elf_finish_dynamic_symbol to handle the local ifunc symbols. (_bfd_riscv_relax_section): Don't do the relaxation for ifunc. * elfxx-riscv.c: Add R_RISCV_IRELATIVE. * configure.ac: Link elf-ifunc.lo to use the generic ifunc support. * configure: Regenerated. include/ * elf/riscv.h: Add R_RISCV_IRELATIVE to 58. ld/ * emulparams/elf32lriscv-defs.sh: Add IREL_IN_PLT. * testsuite/ld-ifunc/ifunc.exp: Enable ifunc tests for RISC-V. * testsuite/ld-riscv-elf/ld-riscv-elf.exp (run_dump_test_ifunc): New dump test for ifunc. There are two arguments, 'target` and `output`. The `target` is rv32 or rv64, and the `output` is used to choose which output you want to test (exe, pie or .so). * testsuite/ld-riscv-elf/ifunc-reloc-call-01.s: New testcase. * testsuite/ld-riscv-elf/ifunc-reloc-call-01.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt.s: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt.d: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01.s: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01.d: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02.s: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02.d: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-resolver.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-caller.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-exe.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pic.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pie.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-caller-pcrel.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pic.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pie.d: Likewise.	6 years ago
H.J. Lu	32930e4edb	x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 Update GNU_PROPERTY_X86_ISA_1_XXX macros: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 in x86 ELF binaries to indicate that micro-architecture ISA levels required to execute the binary: #define GNU_PROPERTY_X86_ISA_1_NEEDED (GNU_PROPERTY_X86_UINT32_OR_LO + 2) #define GNU_PROPERTY_X86_ISA_1_USED (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 2) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 2) The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX. In addition to EM_X86_64, GNU_PROPERTY_X86_ISA_1_V[234] marker can be used by ld.so to detect the x86-64-v4 shared library placed in an x86-64-v2 directory by mistake on an x86-64-v2 machine to avoid crashes on x86-64-v4 instructions. Add -z x86-64-v[234] linker command line option to mark x86-64-v[234] ISA level as needed. Also add #define GNU_PROPERTY_X86_FEATURE_2_MASK (1U << 11) for mask registers. bfd/ PR gas/26703 * elf-linker-x86.h (elf_linker_x86_params): Add isa_level. * elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Merge GNU_PROPERTY_X86_ISA_1_V[234]. (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_V[234] for -z x86-64-v[234]. binutils/ PR gas/26703 * readelf.c (decode_x86_compat_2_isa): New function. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature_1): Handle GNU_PROPERTY_X86_FEATURE_2_MASK. (print_gnu_property_note): Handle X86_COMPAT_2_ISA_1_USED, and X86_COMPAT_2_ISA_1_NEEDED. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (xstate): Add xstate_mask. (md_assemble): Check i.types[j], instead of i.tm.operand_types[j], for xstate. Set xstate_mask, instead of xstate_zmm, for RegMask. (output_insn): Update for GNU_PROPERTY_X86_ISA_1_V[234]. Update xstate for mask register and VSIB. * testsuite/gas/i386/i386.exp: Run more GNU_PROPERTY tests. * testsuite/gas/i386/property-1.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED value. * testsuite/gas/i386/property-2.s: Only keep cmove. * testsuite/gas/i386/property-3.s: Changed to addsubpd. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-7.d: Likewise. * testsuite/gas/i386/x86-64-property-8.d: Likewise. * testsuite/gas/i386/x86-64-property-9.d: Likewise. * testsuite/gas/i386/property-11.d: New file. * testsuite/gas/i386/property-11.s: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/property-12.s: Likewise. * testsuite/gas/i386/property-13.d: Likewise. * testsuite/gas/i386/property-13.s: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-13.d: Likewise. * testsuite/gas/i386/x86-64-property-14.d: Likewise. * testsuite/gas/i386/x86-64-property-14.s: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): New. (GNU_PROPERTY_X86_ISA_1_USED): Likewise. (GNU_PROPERTY_X86_ISA_1_V2): Likewise. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MASK): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-v[234]. * ld.texi: Document -z x86-64-v[234]. * emulparams/elf32_x86_64.sh: Use x86-64-level.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/x86-64-level.sh: New file. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-6, property-x86-isa1, property-x86-isa2 and property-x86-isa3. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Likewise. * testsuite/ld-x86-64/property-x86-5b.s: Likewise. * testsuite/ld-i386/property-x86-6.d: New file. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-6-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-6.d: Likewise. * testsuite/ld-x86-64/property-x86-6.s: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.s: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/simple.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-6, property-x86-6-x32, property-x86-isa1, property-x86-isa1-x32, property-x86-isa2, property-x86-isa2-x32, property-x86-isa3-x32 and property-x86-isa3.	6 years ago
Mark Wielaard	d7b477c541	Sync libiberty and include with GCC for get_DW_UT_name. This adds a get_DW_UT_name function to dwarfnames using dwarf2.def for use in binutils readelf to show the unit types in a DWARF5 header. include/ChangeLog: Sync with GCC * dwarf2.def: Add DWARF5 Unit type header encoding macros DW_UT_FIRST, DW_UT and DW_UT_END. * dwarf2.h (enum dwarf_unit_type): Removed and define using DW_UT_FIRST, DW_UT and DW_UT_END macros. (get_DW_UT_name): New function declaration. libiberty/ChangeLog: Sync with GCC * dwarfnames.c (get_DW_UT_name): Define using DW_UT_FIRST, DW_UT and DW_UT_END.	6 years ago
H.J. Lu	496afd1705	elf: Add -z unique-symbol to avoid duplicated local symbol names The symbol string table in the .symtab section is optional and cosmetic. The contents of the .symtab section have no impact on run-time execution. The symbol names in the symbol string table help distinguish addresses at different locations. Add a linker option, -z unique-symbol, to avoid duplicated local symbol names in the symbol string table. This feature was well received by the livepatch maintainers. It not only solves the duplicated local symbol name problem, but also would allow livepatch to more precisely locate duplicate symbols in general for patching. bfd/ PR ld/26391 * elflink.c (elf_final_link_info): Add local_hash_table. (local_hash_entry): New. (local_hash_newfunc): Likewise. (elf_link_output_symstrtab): Append ".COUNT" to duplicated local symbols. (bfd_elf_final_link): Initialize and free local_hash_table for "-z unique-symbol". include/ PR ld/26391 * bfdlink.h (bfd_link_info): Add unique_symbol. ld/ PR ld/26391 * NEWS: Mention "-z unique-symbol". * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Handle "-z unique-symbol" and "-z nounique-symbol". * ld.texi: Document "-z unique-symbol" and "-z nounique-symbol". * lexsup.c (elf_static_list_options): Add "-z unique-symbol" and "-z nounique-symbol". * testsuite/ld-elf/elf.exp: Add PR ld/26391 tests. * testsuite/ld-elf/pr26391.nd: New file. * testsuite/ld-elf/pr26391.out: Likewise. * testsuite/ld-elf/pr26391a.c: Likewise. * testsuite/ld-elf/pr26391b.c: Likewise. * testsuite/ld-elf/pr26391c.c: Likewise. * testsuite/ld-elf/pr26391d.c: Likewise.	6 years ago
Felix Willgerodt	dae7c5a444	Sync include, libiberty with GCC. include: 2020-09-10 Felix Willgerodt <felix.willgerodt@intel.com> Sync with GCC 2020-08-17 Felix Willgerodt <felix.willgerodt@intel.com> * floatformat.h (floatformat_bfloat16_big): New. (floatformat_bfloat16_little): New. libiberty: 2020-09-10 Felix Willgerodt <felix.willgerodt@intel.com> Sync with GCC 2020-08-17 Felix Willgerodt <felix.willgerodt@intel.com> * floatformat.c (floatformat_bfloat16_big): New. (floatformat_bfloat16_little): New.	6 years ago
Cooper Qu	548f527578	CSKY: Change ISA flag's type to bfd_uint64_t and fix build error. The previous patch missed one modification. Following is the error message: gas/config/tc-csky.c:806:5: error: 'CSKY_ARCH_804' undeclared here (not in a function); did you mean 'CSKY_ARCH_807'? include/ * opcode/csky.h (CSKYV1_ISA_E1): Convert to bfd_uint64_t type. (CSKYV2_ISA_E1): Likewise. (CSKYV2_ISA_1E2): Likewise. (CSKYV2_ISA_2E3): Likewise. (CSKYV2_ISA_3E7): Likewise. (CSKYV2_ISA_7E10): Likewise. (CSKYV2_ISA_3E3R1): Likewise. (CSKYV2_ISA_3E3R2): Likewise. (CSKYV2_ISA_10E60): Likewise. (CSKYV2_ISA_3E3R3): Likewise. (CSKY_ISA_TRUST): Likewise. (CSKY_ISA_CACHE): Likewise. (CSKY_ISA_NVIC): Likewise. (CSKY_ISA_CP): Likewise. (CSKY_ISA_MP): Likewise. (CSKY_ISA_MP_1E2): Likewise. (CSKY_ISA_JAVA): Likewise. (CSKY_ISA_MAC): Likewise. (CSKY_ISA_MAC_DSP): Likewise. (CSKY_ISA_DSP): Likewise. (CSKY_ISA_DSP_1E2): Likewise. (CSKY_ISA_DSP_ENHANCE): Likewise. (CSKY_ISA_DSPE60): Likewise. (CSKY_ISA_FLOAT_E1): Likewise. (CSKY_ISA_FLOAT_1E2): Likewise. (CSKY_ISA_FLOAT_1E3): Likewise. (CSKY_ISA_FLOAT_3E4): Likewise. (CSKY_ISA_FLOAT_7E60): Likewise. (CSKY_ISA_VDSP): Likewise. (CSKY_ISA_VDSP_2): Likewise. (CSKY_ARCH_804): Define. (CSKY_ARCH_805): Define. (CSKY_ARCH_800): Define.	6 years ago
H.J. Lu	8d58ed37f1	x86: Add NT_X86_CET note Define NT_X86_CET which is the proposed note for x86 CET state to support Intel CET in Linux kernel. Double check it after Intel CET patches have been merged into Linux kernel. binutils/ * readelf.c (get_note_type): Support NT_X86_CET. include/ * elf/common.h (NT_X86_CET): New.	6 years ago
Cooper Qu	525a0aa301	CSKY: Add new arches while refine the cpu option process. Add arches CK804, CK805 and CK800. CK800 is an special arch which support all instructions for CSKYV2. Refine the cpu tables to simplify adding a new cpu. Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com> gas/ * config/tc-csky.c (struct csky_cpu_info): Add new members isa_flag, features and ver. (struct csky_cpu_feature): New. (struct csky_cpu_version): New. (CSKY_FEATURE_MAX): Define. (CSKY_CPU_REVERISON_MAX): Define. (FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP, FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD): Define, each standard one collection of instructions. (CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e, CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v, CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt, CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv, CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d, CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft, CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv, CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv, CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define, the features combination used by cpu. (CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0, CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0, CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3): Define, version information used by cpu. (csky_cpus): Refine, and add CK804, CK805 and CK800. (parse_cpu): Refine. (parse_arch): Refine. (md_show_usage): Refine. (md_begin): Refine. include/ * opcode/csky.h (CSKY_ARCH_804): Define. (CSKY_ARCH_805): Define. (CSKY_ARCH_800): Define.	6 years ago
Nick Clifton	0332f66274	Fix compile time warnings when building for the CSKY target on a 32-bit host. incldue * opcode/csky.h (CSKY_ISA_FLOAT_7E60): Use a long long type for this value. opcodes * csky-dis.c (csky_output_operand): Coerce the immediate values to long before printing.	6 years ago
Cooper Qu	6a1ed9106f	CSKY: Change mvtc and mulsw's ISA flag. gas/ * config/tc-csky.c (CSKYV2_ISA_DSP): CSKY_ISA_DSPE60. (CSKY_ISA_860): Likewise. include/ * opcode/csky.h (CSKY_ISA_DSPE60): Define. opcodes/ * csky-opc.h (csky_v2_opcodes): Change mvtc and mulsw's ISA flag.	6 years ago
Cooper Qu	1feede9b38	CSKY: Add FPUV3 instructions, which supported by ck860f. Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com> gas/ * config/tc-csky.c (float_work_fpuv3_fmovi): New function, helper function to encode fpuv3 fmovi instructions. (float_work_fpuv3_fstore): New function. (struct literal): Add new member 'offset'. (csky_cpus): New cpu CK860f. (enter_literal): Return literal pool pointer instead of offset. (parse_rt): Adjust the change of enter_literal. (parse_rtf): Likewise. (v1_work_lrw): Likewise. (v1_work_jbsr): Likewise. (v2_work_lrw): Likewise. (v2_work_jbsr): Likewise. (v2_work_jsri): Likewise. (vdsp_work_vlrw): Likewise. (is_freglist_legal): Add handler for FPUV3. (parse_type_freg): Likewise. (is_imm_within_range): Set e.X_add_number if it is a signed and negtive number. (get_operand_value): Add handler for OPRND_TYPE_IMM9b, OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. (float_to_half): Convert float number to harf float. opcodes/ * csky-dis.c (csky_output_operand): Add handlers for OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. Refine OPRND_TYPE_FREGLIST_DASH to support FPUV3 instructions. * csky-opc.h (enum operand_type): New enum OPRND_TYPE_IMM9b, OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. (OPRND_MASK_4_5, OPRND_MASK_6, OPRND_MASK_6_7, OPRND_MASK_6_8, OPRND_MASK_7, OPRND_MASK_7_8, OPRND_MASK_17_24, OPRND_MASK_20, OPRND_MASK_20_21, OPRND_MASK_20_22, OPRND_MASK_20_23, OPRND_MASK_20_24, OPRND_MASK_20_25, OPRND_MASK_0_3or5_8, OPRND_MASK_0_3or6_7, OPRND_MASK_0_3or25, OPRND_MASK_0_4or21_24, OPRND_MASK_5or20_21, OPRND_MASK_5or20_22, OPRND_MASK_5or20_23, OPRND_MASK_5or20_24, OPRND_MASK_5or20_25, OPRND_MASK_8_9or21_25, OPRND_MASK_8_9or16_25, OPRND_MASK_4_6or20, OPRND_MASK_5_7or20, OPRND_MASK_4_5or20or25, OPRND_MASK_4_6or20or25, OPRND_MASK_4_7or20or25, OPRND_MASK_6_9or17_24, OPRND_MASK_6_7or20, OPRND_MASK_6or20, OPRND_MASK_7or20, OPRND_MASK_5or8_9or16_25, OPRND_MASK_5or8_9or20_25): Define. (csky_v2_opcodes): Add FPUV3 instructions. include/ * opcode/csky.h (CSKY_ISA_FLOAT_7E60): Define.	6 years ago
Jozef Lawrynowicz	7d81bc937c	MSP430: Support relocations for subtract expressions in .uleb128 directives Link-time relaxations of branches are common for MSP430, given that GCC can generate pessimal branch instructions, and the -mcode-region=either/-mdata-region=either options to shuffle sections can further change the type of branch instruction required. These relaxations can result in invalid code when .uleb128 directives, used in the .gcc_except_table section, are used to calculate the distance between two labels. A value for the .uleb128 directive is calculated at assembly-time, and can't be updated at link-time, even if relaxation causes the distance between the labels to change. This patch adds relocations for subtract expressions in .uleb128 directives, to allow the linker to re-calculate the value of these expressions after relaxation has been performed. bfd/ChangeLog: * bfd-in2.h (bfd_reloc_code_real): Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * elf32-msp430.c (msp430_elf_ignore_reloc): New. (elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. (msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. (write_uleb128): New. (msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. * libbfd.c (_bfd_write_unsigned_leb128): New. * libbfd.h (_bfd_write_unsigned_leb128): New prototype. Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128. binutils/ChangeLog: * readelf.c (target_specific_reloc_handling): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. gas/ChangeLog: * config/tc-msp430.c (msp430_insert_uleb128_fixes): New. (msp430_md_end): Call msp430_insert_uleb128_fixes. include/ChangeLog: * elf/msp430.h (elf_msp430_reloc_type): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. ld/ChangeLog: * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests. * testsuite/ld-msp430-elf/uleb128.s: New test. * testsuite/ld-msp430-elf/uleb128_430.d: New test. * testsuite/ld-msp430-elf/uleb128_430x.d: New test.	6 years ago
Alex Coplan	38cf07a6c0	aarch64: Add support for Armv8-R system registers This patch adds support for the system registers introduced in Armv8-R AArch64. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to validation function. (parse_sys_ins_reg): Likewise. (print_operands): Pass CPU features to aarch64_print_operand(). * testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output. * testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output. * testsuite/gas/aarch64/v8-r-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take system register name in order to simplify validation for v8-R. (aarch64_print_operand): Also take CPU feature set, as disassembly for system registers now depends on arch variant. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (print_operands): Pass CPU features to aarch64_print_operand(). * aarch64-opc.c (aarch64_print_operand): Use CPU features to determine preferred disassembly of system registers. (SR_RNG): Refactor to use new SR_FEAT2 macro. (SR_FEAT2): New. (SR_V8_1_A): New. (SR_V8_4_A): New. (SR_V8_A): New. (SR_V8_R): New. (SR_EXPAND_ELx): New. (SR_EXPAND_EL12): New. (aarch64_sys_regs): Specify which registers are only on A-profile, add R-profile system registers. (ENC_BARLAR): New. (PRBARn_ELx): New. (PRLARn_ELx): New. (aarch64_sys_ins_reg_supported_p): Reject EL3 registers for Armv8-R AArch64.	6 years ago
Alex Coplan	95830c988a	aarch64: Add base support for Armv8-R This patch adds the basic infrastructure needed to support Armv8-R in AArch64 binutils: new command-line flags, new feature bits, a new BFD architecture, and support for differentiating between architecture variants in the disassembler. The new command-line options added by this patch are -march=armv8-r in GAS and -m aarch64:armv8-r in objdump. The disassembler support is necessary since Armv8-R AArch64 introduces a system register (VSCTLR_EL2) which shares an encoding with a different system register (TTBR0_EL2) in Armv8-A. This also allows us to use the correct preferred disassembly for the new DFB alias introduced in Armv8-R. bfd/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * archures.c (bfd_mach_aarch64_8R): New. * bfd-in2.h: Regenerate. * cpu-aarch64.c (bfd_aarch64_arch_v8_r): New. (bfd_aarch64_arch_ilp32): Update tail pointer. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_archs): Add armv8-r. * doc/c-aarch64.texi: Document -march=armv8-r. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_A): New. (AARCH64_FEATURE_V8_R): New. (AARCH64_ARCH_V8): Include new A-profile feature bit. (AARCH64_ARCH_V8_R): New. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (arch_variant): New. (determine_disassembling_preference): Disassemble according to arch variant. (select_aarch64_variant): New. (print_insn_aarch64): Set feature set.	6 years ago
Alan Modra	7c80dd4c2c	ubsan: v850-opc.c:412 left shift cannot be represented include/ * opcode/v850.h (struct v850_operand <insert>): Make param op an unsigned long. opcodes/ * v850-opc.c (insert_i5div1, insert_i5div2, insert_i5div3), (insert_d5_4, insert_d8_6, insert_d8_7, insert_v8, insert_d9), (insert_u16_loop, insert_d16_15, insert_d16_16, insert_d17_16), (insert_d22, insert_d23, insert_d23_align1, insert_i9, insert_u9), (insert_spe, insert_r4, insert_POS, insert_WIDTH, insert_SELID), (insert_VECTOR8, insert_VECTOR5, insert_CACHEOP, insert_PREFOP), (nsert_IMM10U, insert_SRSEL1, insert_SRSEL2): Use unsigned long for value parameter and update code to suit. (extract_d9, extract_d16_15, extract_d16_16, extract_d17_16), (extract_d22, extract_d23, extract_i9): Use unsigned long variables.	6 years ago
Cooper Qu	4211a34001	CSKY: Add CPU CK803r3. Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is enabled by ck803r3, and it's still a part of enhance DSP instruction set. gas/ * config/tc-csky.c (csky_cpus): Add ck803r3. (CSKY_ISA_803R3): Define. (CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1. include/ * opcode/csky.h (CSKYV2_ISA_3E3R3): Define. opcodes/ * csky-opc.h (csky_v2_opcodes): Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set.	6 years ago
Alan Modra	1174d92070	PR26493 UBSAN: elfnn-riscv.c left shift of negative value include/ PR 26493 * opcode/riscv.h (OP_MASK_CSR, OP_MASK_CUSTOM_IMM) (OP_MASK_FUNCT7, OP_MASK_RS3): Make unsigned. bfd/ PR 26493 * elfnn-riscv.c (riscv_make_plt_header): Cast PLT_HEADER_SIZE to unsigned when using with RISCV_ITYPE. (_bfd_riscv_relax_call): Use an unsigned foff.	6 years ago
Alan Modra	a148a448ec	PR26457 UBSAN: som.c:1794 left shift cannot be represented PR 26457 * som/aout.h (SOM_SUBSPACE_ACCESS_CONTROL_BITS_MASK): Make unsigned. (SOM_SUBSPACE_MEMORY_RESIDENT, SOM_SUBSPACE_DUP_COMMON) (SOM_SUBSPACE_IS_COMMON, SOM_SUBSPACE_IS_LOADABLE) (SOM_SUBSPACE_QUADRANT_MASK, SOM_SUBSPACE_INITIALLY_FROZEN) (SOM_SUBSPACE_IS_FIRST, SOM_SUBSPACE_CODE_ONLY) (SOM_SUBSPACE_SORT_KEY_MASK, SOM_SUBSPACE_REPLICATE_INIT) (SOM_SUBSPACE_CONTINUATION, SOM_SUBSPACE_IS_TSPECIFIC) (SOM_SUBSPACE_IS_COMDAT): Likewise.	6 years ago
Cooper Qu	0861f561eb	CSKY: Support attribute section. bfd * elf32-csky.c (csky_archs): Fix arch names. (csky_find_arch_with_name): New. (elf32_csky_merge_attributes): New. (csky_elf_merge_private_bfd_data): Add process of merge attribute section. (elf32_csky_obj_attrs_arg_type): New. (elf32_csky_obj_attrs_handle_unknown): New. (elf_backend_obj_attrs_vendor): Define. (elf_backend_obj_attrs_section): Define. (elf_backend_obj_attrs_arg_type): Define. (elf_backend_obj_attrs_section_type): Define. binutils/ * readelf.c (get_csky_section_type_name): New. (get_section_type_name): Add handler for CSKY. (display_csky_attribute): New. (process_arch_specific): Add handler for CSKY. * testsuite/binutils-all/strip-3.d: Remove .csky.attributes section. elfcpp/ * elfcpp.h (enum SHT): New enum SHT_CSKY_ATTRIBUTES. gas/ * gas/config/tc-csky.c (md_begin): Set attributes. (isa_flag): Change type to unsigned 64 bits. (struct csky_cpu_info): Likewise. (struct csky_macro_info): Likewise. (set_csky_attribute): New. * testsuite/gas/csky/802j.d: Ignore .csky.attributes section. * testsuite/gas/csky/all.d: Likewise. * testsuite/gas/csky/bsr1.d: Likewise. * testsuite/gas/csky/csky_vdsp.d: Likewise. * testsuite/gas/csky/cskyv2_all.d: Likewise. * testsuite/gas/csky/cskyv2_ck803r2.d: Likewise. * testsuite/gas/csky/cskyv2_ck860.d: Likewise. * testsuite/gas/csky/cskyv2_dsp.d: Likewise. * testsuite/gas/csky/cskyv2_elrw.d: Likewise. * testsuite/gas/csky/cskyv2_float.d: Likewise. * testsuite/gas/csky/enhance_dsp.d: Likewise. * testsuite/gas/csky/java.d: Likewise. * testsuite/gas/csky/v1_float.d: Likewise. * testsuite/gas/csky/v2_float_part1.d: Likewise. * testsuite/gas/csky/v2_float_part2.d: Likewise. * testsuite/gas/csky/v2_tls_gd.d: Likewise. * testsuite/gas/csky/v2_tls_ie.d: Likewise. * testsuite/gas/csky/v2_tls_ld.d: Likewise. * testsuite/gas/csky/v2_tls_le.d: Likewise. * testsuite/gas/elf/elf.exp: Add handler for CSKY. * testsuite/gas/elf/section2.e-csky: New. include/ * elf/csky.h (SHT_CSKY_ATTRIBUTES): Define. (Tag_CSKY_ARCH_NAME): New enum constant. (Tag_CSKY_CPU_NAME): Likewise. (Tag_CSKY_ISA_FLAGS): Likewise. (Tag_CSKY_DSP_VERSION): Likewise. (Tag_CSKY_VDSP_VERSION): Likewise. (Tag_CSKY_FPU_VERSION): Likewise. (Tag_CSKY_FPU_ABI): Likewise. (Tag_CSKY_FPU_ROUNDING): Likewise. (Tag_CSKY_FPU_DENORMAL): Likewise. (Tag_CSKY_FPU_Exception): Likewise. (Tag_CSKY_FPU_NUMBER_MODULE): Likewise. (Tag_CSKY_FPU_HARDFP): Likewise. (Tag_CSKY_MAX): Likewise. (VAL_CSKY_DSP_VERSION_EXTENSION): Likewise. (VAL_CSKY_DSP_VERSION_2): Likewise. (VAL_CSKY_VDSP_VERSION_1): Likewise. (VAL_CSKY_VDSP_VERSION_2): Likewise. (VAL_CSKY_FPU_ABI_SOFT): Likewise. (VAL_CSKY_FPU_ABI_SOFTFP): Likewise. (VAL_CSKY_FPU_ABI_HARD): Likewise. (VAL_CSKY_FPU_HARDFP_HALF): Likewise. (VAL_CSKY_FPU_HARDFP_SINGLE): Likewise. (VAL_CSKY_FPU_HARDFP_DOUBLE): Likewise. * opcode/csky.h (CSKY_ISA_VDSP_V2): Define. CSKYV1_ISA_E1: Change to long constant type. CSKYV2_ISA_E1: Likewise. CSKYV2_ISA_1E2: Likewise. CSKYV2_ISA_2E3: Likewise. CSKYV2_ISA_3E7: Likewise. CSKYV2_ISA_7E10: Likewise. CSKYV2_ISA_3E3R1: Likewise. CSKYV2_ISA_3E3R2: Likewise. CSKYV2_ISA_10E60: Likewise. CSKY_ISA_TRUST: Likewise. CSKY_ISA_CACHE: Likewise. CSKY_ISA_NVIC: Likewise. CSKY_ISA_CP: Likewise. CSKY_ISA_MP: Likewise. CSKY_ISA_MP_1E2: Likewise. CSKY_ISA_JAVA: Likewise. CSKY_ISA_MAC: Likewise. CSKY_ISA_MAC_DSP: Likewise. CSKY_ISA_DSP: Likewise. CSKY_ISA_DSP_1E2: Likewise. CSKY_ISA_DSP_ENHANCE: Likewise. CSKY_ISA_FLOAT_E1: Likewise. CSKY_ISA_FLOAT_1E2: Likewise. CSKY_ISA_FLOAT_1E3: Likewise. CSKY_ISA_FLOAT_3E4: Likewise. CSKY_ISA_VDSP: Likewise. ld/ * emulparams/cskyelf.sh: Support attribute section. * testsuite/ld-csky/tls-le-v1.d: Match .csky.attributes section. * ld/testsuite/ld-csky/tls-le.d: Likewise. * testsuite/ld-elf/non-contiguous.ld: Ignore .csky.attributes section. opcodes/ * csky-dis.c (CSKY_DEFAULT_ISA): Define. (csky_dis_info): Add member isa. (csky_find_inst_info): Skip instructions that do not belong to current CPU. (csky_get_disassembler): Get infomation from attribute section. (print_insn_csky): Set defualt ISA flag. * csky.h (CSKY_ISA_VDSP_2): Rename from CSKY_ISA_VDSP_V2. * csky-opc.h (struct csky_opcode): Change isa_flag16 and isa_flag32'type to unsigned 64 bits.	6 years ago
Nick Alcock	926c9e7665	libctf, binutils, include, ld: gettextize and improve error handling This commit follows on from the earlier commit "libctf, ld, binutils: add textual error/warning reporting for libctf" and converts every error in libctf that was reported using ctf_dprintf to use ctf_err_warn instead, gettextizing them in the process, using N_() where necessary to avoid doing gettext calls unless an error message is actually generated, and rephrasing some error messages for ease of translation. This requires a slight change in the ctf_errwarning_next API: this API is public but has not been in a release yet, so can still change freely. The problem is that many errors are emitted at open time (whether opening of a CTF dict, or opening of a CTF archive): the former of these throws away its incompletely-initialized ctf_file_t rather than return it, and the latter has no ctf_file_t at all. So errors and warnings emitted at open time cannot be stored in the ctf_file_t, and have to go elsewhere. We put them in a static local in ctf-subr.c (which is not very thread-safe: a later commit will improve things here): ctf_err_warn with a NULL fp adds to this list, and the public interface ctf_errwarning_next with a NULL fp retrieves from it. We need a slight exception from the usual iterator rules in this case: with a NULL fp, there is nowhere to store the ECTF_NEXT_END "error" which signifies the end of iteration, so we add a new err parameter to ctf_errwarning_next which is used to report such iteration-related errors. (If an fp is provided -- i.e., if not reporting open errors -- this is optional, but even if it's optional it's still an API change. This is actually useful from a usability POV as well, since ctf_errwarning_next is usually called when there's been an error, so overwriting the error code with ECTF_NEXT_END is not very helpful! So, unusually, ctf_errwarning_next now uses the passed fp for its error code only if no errp pointer is passed in, and leaves it untouched otherwise.) ld, objdump and readelf are adapted to call ctf_errwarning_next with a NULL fp to report open errors where appropriate. The ctf_err_warn API also has to change, gaining a new error-number parameter which is used to add the error message corresponding to that error number into the debug stream when LIBCTF_DEBUG is enabled: changing this API is easy at this point since we are already touching all existing calls to gettextize them. We need this because the debug stream should contain the errno's message, but the error reported in the error/warning stream should not, because the caller will probably report it themselves at failure time regardless, and reporting it in every error message that leads up to it leads to a ridiculous chattering on failure, which is likely to end up as ridiculous chattering on stderr (trimmed a bit): CTF error: `ld/testsuite/ld-ctf/A.c (0): lookup failure for type 3: flags 1: The parent CTF dictionary is unavailable' CTF error: `ld/testsuite/ld-ctf/A.c (0): struct/union member type hashing error during type hashing for type 80000001, kind 6: The parent CTF dictionary is unavailable' CTF error: `deduplicating link variable emission failed for ld/testsuite/ld-ctf/A.c: The parent CTF dictionary is unavailable' ld/.libs/lt-ld-new: warning: CTF linking failed; output will have no CTF section: `The parent CTF dictionary is unavailable' We only need to be told that the parent CTF dictionary is unavailable once, not over and over again! errmsgs are still emitted on warning generation, because warnings do not usually lead to a failure propagated up to the caller and reported there. Debug-stream messages are not translated. If translation is turned on, there will be a mixture of English and translated messages in the debug stream, but rather that than burden the translators with debug-only output. binutils/ChangeLog 2020-08-27 Nick Alcock <nick.alcock@oracle.com> * objdump.c (dump_ctf_archive_member): Move error- reporting... (dump_ctf_errs): ... into this separate function. (dump_ctf): Call it on open errors. * readelf.c (dump_ctf_archive_member): Move error- reporting... (dump_ctf_errs): ... into this separate function. Support calls with NULL fp. Adjust for new err parameter to ctf_errwarning_next. (dump_section_as_ctf): Call it on open errors. include/ChangeLog 2020-08-27 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_errwarning_next): New err parameter. ld/ChangeLog 2020-08-27 Nick Alcock <nick.alcock@oracle.com> * ldlang.c (lang_ctf_errs_warnings): Support calls with NULL fp. Adjust for new err parameter to ctf_errwarning_next. Only check for assertion failures when fp is non-NULL. (ldlang_open_ctf): Call it on open errors. * testsuite/ld-ctf/ctf.exp: Always use the C locale to avoid breaking the diags tests. libctf/ChangeLog 2020-08-27 Nick Alcock <nick.alcock@oracle.com> * ctf-subr.c (open_errors): New list. (ctf_err_warn): Calls with NULL fp append to open_errors. Add err parameter, and use it to decorate the debug stream with errmsgs. (ctf_err_warn_to_open): Splice errors from a CTF dict into the open_errors. (ctf_errwarning_next): Calls with NULL fp report from open_errors. New err param to report iteration errors (including end-of-iteration) when fp is NULL. (ctf_assert_fail_internal): Adjust ctf_err_warn call for new err parameter: gettextize. * ctf-impl.h (ctfo_get_vbytes): Add ctf_file_t parameter. (LCTF_VBYTES): Adjust. (ctf_err_warn_to_open): New. (ctf_err_warn): Adjust. (ctf_bundle): Used in only one place: move... * ctf-create.c: ... here. (enumcmp): Use ctf_err_warn, not ctf_dprintf, passing the err number down as needed. Don't emit the errmsg. Gettextize. (membcmp): Likewise. (ctf_add_type_internal): Likewise. (ctf_write_mem): Likewise. (ctf_compress_write): Likewise. Report errors writing the header or body. (ctf_write): Likewise. * ctf-archive.c (ctf_arc_write_fd): Use ctf_err_warn, not ctf_dprintf, and gettextize, as above. (ctf_arc_write): Likewise. (ctf_arc_bufopen): Likewise. (ctf_arc_open_internal): Likewise. * ctf-labels.c (ctf_label_iter): Likewise. * ctf-open-bfd.c (ctf_bfdclose): Likewise. (ctf_bfdopen): Likewise. (ctf_bfdopen_ctfsect): Likewise. (ctf_fdopen): Likewise. * ctf-string.c (ctf_str_write_strtab): Likewise. * ctf-types.c (ctf_type_resolve): Likewise. * ctf-open.c (get_vbytes_common): Likewise. Pass down the ctf dict. (get_vbytes_v1): Pass down the ctf dict. (get_vbytes_v2): Likewise. (flip_ctf): Likewise. (flip_types): Likewise. Use ctf_err_warn, not ctf_dprintf, and gettextize, as above. (upgrade_types_v1): Adjust calls. (init_types): Use ctf_err_warn, not ctf_dprintf, as above. (ctf_bufopen_internal): Likewise. Adjust calls. Transplant errors emitted into individual dicts into the open errors if this turns out to be a failed open in the end. * ctf-dump.c (ctf_dump_format_type): Adjust ctf_err_warn for new err argument. Gettextize. Don't emit the errmsg. (ctf_dump_funcs): Likewise. Collapse err label into its only case. (ctf_dump_type): Likewise. * ctf-link.c (ctf_create_per_cu): Adjust ctf_err_warn for new err argument. Gettextize. Don't emit the errmsg. (ctf_link_one_type): Likewise. (ctf_link_lazy_open): Likewise. (ctf_link_one_input_archive): Likewise. (ctf_link_deduplicating_count_inputs): Likewise. (ctf_link_deduplicating_open_inputs): Likewise. (ctf_link_deduplicating_close_inputs): Likewise. (ctf_link_deduplicating): Likewise. (ctf_link): Likewise. (ctf_link_deduplicating_per_cu): Likewise. Add some missed ctf_set_errnos to obscure error cases. * ctf-dedup.c (ctf_dedup_rhash_type): Adjust ctf_err_warn for new err argument. Gettextize. Don't emit the errmsg. (ctf_dedup_populate_mappings): Likewise. (ctf_dedup_detect_name_ambiguity): Likewise. (ctf_dedup_init): Likewise. (ctf_dedup_multiple_input_dicts): Likewise. (ctf_dedup_conflictify_unshared): Likewise. (ctf_dedup): Likewise. (ctf_dedup_rwalk_one_output_mapping): Likewise. (ctf_dedup_id_to_target): Likewise. (ctf_dedup_emit_type): Likewise. (ctf_dedup_emit_struct_members): Likewise. (ctf_dedup_populate_type_mapping): Likewise. (ctf_dedup_populate_type_mappings): Likewise. (ctf_dedup_emit): Likewise. (ctf_dedup_hash_type): Likewise. Fix a bit of messed-up error status setting. (ctf_dedup_rwalk_one_output_mapping): Likewise. Don't hide unknown-type-kind messages (which signify file corruption).	6 years ago
Nick Clifton	3eba3ef344	Add support to readelf for the OpenBSD segment types. PR 26405 binutils* readelf.c (get_segment_type): Handle OpenBSD segment types. include * elf/common.h (PT_OPENBSD_BOOTDATA): Define. (PT_OPENBSD_RANDOMIZE): Define. (PT_OPENBSD_WXNEEDED): Define.	6 years ago
Alan Modra	1673aff569	PR26458 UBSAN: elf32-i386.c:3615 left shift of negative value Happens when poking symbol index -2 into r_info. (The index is updated before writing out to file.) PR 26458 * elf/common.h (ELF32_R_INFO): Cast symbol index to unsigned.	6 years ago
Cooper Qu	531c73a37b	CSKY: Add new arch CK860. bfd/ * bfd-in2.h (bfd_mach_ck860): New. * cpu-csky.c (arch_info_struct): Add item for CK860. gas/ * config/tc-csky.c (csky_archs): Add item for CK860, change ck810 and ck807's arch_flag. (csky_cpus): Add item for CK860. (md_begin): Enable DSP for CK810 and CK807 by default. (md_apply_fix): Fix CKCORE_TLS_IE32 relocation failure. * gas/testsuite/gas/csky/cskyv2_all.d: Change 'sync 0' to 'sync'. * gas/testsuite/gas/csky/cskyv2_all.s: Likewise. * gas/testsuite/gas/csky/cskyv2_ck860.d: New. * gas/testsuite/gas/csky/cskyv2_ck860.s: New. * gas/testsuite/gas/csky/enhance_dsp.d: Change plsli.u16 to plsli.16. * gas/testsuite/gas/csky/enhance_dsp.s: Likewise. include/ * opcode/csky.h (CSKYV2_ISA_10E60): New. (CSKY_ARCH_860): New. opcode/ * csky-dis.c (csky_find_inst_info): Skip CK860's instructions in other CPUs to speed up disassembling. * csky-opc.h (csky_v2_opcodes): Add CK860's instructions, Change plsli.u16 to plsli.16, change sync's operand format. Change-Id: I80ec1a9c0cc600d668082a9b91ae6d45b33ec0fc	6 years ago
Cooper Qu	d04aee0f41	CSKY: Add ck803r2 series cpu. gas/ * config/tc-csky.c (CSKY_ISA_803R2): New. (csky_archs): Add ck803r2 series. (md_begin): Fix warning about -medsp. (csky_get_freg_val): Support lowercase of fpu register name. * testsuite/gas/csky/cskyv2_ck803r2.s: New file. * testsuite/gas/csky/cskyv2_ck803r2.d: New file. include/ * csky.h (CSKYV2_ISA_3E3R2): New. opcodes/ * csky-opc.h (csky_v2_opcodes): Add instruction bnezad.	6 years ago
Mark Wielaard	b8fff44e0e	ada-lex.l: Ignore register diagnostic also for g++ defaulting to ISO C++17 Building with a really old flex and a really new g++ is probably not recommended, but it should not cause compile errors. gdb/ChangeLog: * ada-lex.l: Extend register warnings diagnostics comment for g++. include/ChangeLog: * diagnostics.h (DIAGNOSTIC_IGNORE_DEPRECATED_REGISTER): Also define for GCC version 7.0 or higher.	6 years ago
Alex Coplan	fa63795f40	aarch64: Don't assert on long sysreg names This patch fixes an assertion failure on long system register operands in the AArch64 backend. See the new testcase for an input which reproduces the issue. gas/ChangeLog: * config/tc-aarch64.c (parse_sys_reg): Don't assert when parsing a long system register. (parse_sys_ins_reg): Likewise. (sysreg_hash_insert): New. (md_begin): Use sysreg_hash_insert() to ensure all system registers are no longer than the maximum length at startup. * testsuite/gas/aarch64/invalid-sysreg-assert.d: New test. * testsuite/gas/aarch64/invalid-sysreg-assert.l: Error output. * testsuite/gas/aarch64/invalid-sysreg-assert.s: Input. include/ChangeLog: * opcode/aarch64.h (AARCH64_MAX_SYSREG_NAME_LEN): New.	6 years ago
Przemyslaw Wirkus	f7cb161ea6	[aarch64] GAS doesn't validate the architecture version for any tlbi registers. Fixed with this patch. * gas/config/tc-aarch64.c (parse_sys_reg): Call to aarch64_sys_ins_reg_supported_p instead of aarch64_sys_reg_supported_p. (parse_sys_ins_reg): Add aarch64_sys_reg_deprecated_p check. * include/opcode/aarch64.h (aarch64_sys_reg_deprecated_p): Functions paramaters changed. (aarch64_sys_reg_supported_p): Function removed. (aarch64_sys_ins_reg_supported_p): Functions paramaters changed. * opcodes/aarch64-opc.c (aarch64_print_operand): (aarch64_sys_reg_deprecated_p): Functions paramaters changed. (aarch64_sys_reg_supported_p): Function removed. (aarch64_sys_ins_reg_supported_p): Functions paramaters changed. (aarch64_sys_ins_reg_supported_p): Merged aarch64_sys_reg_supported_p into this function. * gas/testsuite/gas/aarch64/illegal-sysreg-5.d: New test. * gas/testsuite/gas/aarch64/illegal-sysreg-5.l: New test. * gas/testsuite/gas/aarch64/sysreg-5.s: New test.	6 years ago
Caroline Tice	a69ee13f5a	For DWARF v5 Dwarf Package Files (.dwp files), the section identifier encodings have changed. This patch updates dwarf2.h to contain the new encodings. (see http://dwarfstd.org/doc/DWARF5.pdf , section 7.3.5). * dwarf2.h (enum dwarf_sect_v5): A new enum section for the sections in a DWARF 5 DWP file (DWP version 5).	6 years ago
Nick Alcock	662df3c3f1	libctf, link: tie in the deduplicating linker This fairly intricate commit connects up the CTF linker machinery (which operates in terms of ctf_archive_t's on ctf_link_inputs -> ctf_link_outputs) to the deduplicator (which operates in terms of arrays of ctf_file_t's, all the archives exploded). The nondeduplicating linker is retained, but is not called unless the CTF_LINK_NONDEDUP flag is passed in (which ld never does), or the environment variable LD_NO_CTF_DEDUP is set. Eventually, once we have confidence in the much-more-complex deduplicating linker, I hope the nondeduplicating linker can be removed. In brief, what this does is traverses each input archive in ctf_link_inputs, opening every member (if not already open) and tying child dicts to their parents, shoving them into an array and constructing a corresponding parents array that tells the deduplicator which dict is the parent of which child. We then call ctf_dedup and ctf_dedup_emit with that array of inputs, taking the outputs that result and putting them into ctf_link_outputs where the rest of the CTF linker expects to find them, then linking in the variables just as is done by the nondeduplicating linker. It also implements much of the CU-mapping side of things. The problem CU-mapping introduces is that if you map many input CUs into one output, this is saying that you want many translation units to produce at most one child dict if conflicting types are found in any of them. This means you can suddenly have multiple distinct types with the same name in the same dict, which libctf cannot really represent because it's not something you can do with C translation units. The deduplicator machinery already committed does as best it can with these, hiding types with conflicting names rather than making child dicts out of them: but we still need to call it. This is done similarly to the main link, taking the inputs (one CU output at a time), deduplicating them, taking the output and making it an input to the final link. Two (significant) optimizations are done: we share atoms tables between all these links and the final link (so e.g. all type hash values are shared, all decorated type names, etc); and any CU-mapped links with only one input (and no child dicts) doesn't need to do anything other than renaming the CU: the CU-mapped link phase can be skipped for it. Put together, large CU-mapped links can save 50% of their memory usage and about as much time (and the memory usage for CU-mapped links is significant, because all those output CUs have to have all their types stored in memory all at once). include/ * ctf-api.h (CTF_LINK_NONDEDUP): New, turn off the deduplicator. libctf/ * ctf-impl.h (ctf_list_splice): New. * ctf-util.h (ctf_list_splice): Likewise. * ctf-link.c (link_sort_inputs_cb_arg_t): Likewise. (ctf_link_sort_inputs): Likewise. (ctf_link_deduplicating_count_inputs): Likewise. (ctf_link_deduplicating_open_inputs): Likewise. (ctf_link_deduplicating_close_inputs): Likewise. (ctf_link_deduplicating_variables): Likewise. (ctf_link_deduplicating_per_cu): Likewise. (ctf_link_deduplicating): Likewise. (ctf_link): Call it.	6 years ago
Nick Alcock	e3e8411bec	libctf, link: add CTF_LINK_OMIT_VARIABLES_SECTION This flag (not used anywhere yet) causes the variables section to be omitted from the output CTF dict. include/ * ctf-api.h (CTF_LINK_OMIT_VARIABLES_SECTION): New. libctf/ * ctf-link.c (ctf_link_one_input_archive_member): Check CTF_LINK_OMIT_VARIABLES_SECTION.	6 years ago
Nick Alcock	0f0c11f7fc	libctf, dedup: add deduplicator This adds the core deduplicator that the ctf_link machinery calls (possibly repeatedly) to link the CTF sections: it takes an array of input ctf_file_t's and another array that indicates which entries in the input array are parents of which other entries, and returns an array of outputs. The first output is always the ctf_file_t on which ctf_link/ctf_dedup/etc was called: the other outputs are child dicts that have the first output as their parent. include/ * ctf-api.h (CTF_LINK_SHARE_DUPLICATED): No longer unimplemented. libctf/ * ctf-impl.h (ctf_type_id_key): New, the key in the cd_id_to_file_t. (ctf_dedup): New, core deduplicator state. (ctf_file_t) <ctf_dedup>: New. <ctf_dedup_atoms>: New. <ctf_dedup_atoms_alloc>: New. (ctf_hash_type_id_key): New prototype. (ctf_hash_eq_type_id_key): Likewise. (ctf_dedup_atoms_init): Likewise. * ctf-hash.c (ctf_hash_eq_type_id_key): New. (ctf_dedup_atoms_init): Likewise. * ctf-create.c (ctf_serialize): Adjusted. (ctf_add_encoded): No longer static. (ctf_add_reftype): Likewise. * ctf-open.c (ctf_file_close): Destroy the ctf_dedup_atoms_alloc. * ctf-dedup.c: New file. * ctf-decls.h [!HAVE_DECL_STPCPY]: Add prototype. * configure.ac: Check for stpcpy. * Makefile.am: Add it. * Makefile.in: Regenerate. * config.h.in: Regenerate. * configure: Regenerate.	6 years ago
Nick Alcock	6dd2819ffc	libctf, link: add the ability to filter out variables from the link The CTF variables section (containing variables that have no corresponding symtab entries) can cause the string table to get very voluminous if the names of variables are long. Some callers want to filter out particular variables they know they won't need. So add a "variable filter" callback that does that: it's passed the name of the variable and a corresponding ctf_file_t / ctf_id_t pair, and should return 1 to filter it out. ld doesn't use this machinery yet, but we could easily add it later if desired. (But see later for a commit that turns off CTF variable- section linking in ld entirely by default.) include/ * ctf-api.h (ctf_link_variable_filter_t): New. (ctf_link_set_variable_filter): Likewise. libctf/ * libctf.ver (ctf_link_set_variable_filter): Add. * ctf-impl.h (ctf_file_t) <ctf_link_variable_filter>: New. <ctf_link_variable_filter_arg>: Likewise. * ctf-create.c (ctf_serialize): Adjust. * ctf-link.c (ctf_link_set_variable_filter): New, set it. (ctf_link_one_variable): Call it if set.	6 years ago
Nick Alcock	5f54462c6a	libctf, link: redo cu-mapping handling Now a bunch of stuff that doesn't apply to ld or any normal use of libctf, piled into one commit so that it's easier to ignore. The cu-mapping machinery associates incoming compilation unit names with outgoing names of CTF dictionaries that should correspond to them, for non-gdb CTF consumers that would like to group multiple TUs into a single child dict if conflicting types are found in it (the existing use case is one kernel module, one child CTF dict, even if the kernel module is composed of multiple CUs). The upcoming deduplicator needs to track not only the mapping from incoming CU name to outgoing dict name, but the inverse mapping from outgoing dict name to incoming CU name, so it can work over every CTF dict we might see in the output and link into it. So rejig the ctf-link machinery to do that. Simultaneously (because they are closely associated and were written at the same time), we add a new CTF_LINK_EMPTY_CU_MAPPINGS flag to ctf_link, which tells the ctf_link machinery to create empty child dicts for each outgoing CU mapping even if no CUs that correspond to it exist in the link. This is a bit (OK, quite a lot) of a waste of space, but some existing consumers require it. (Nobody else should use it.) Its value is not consecutive with existing CTF_LINK flag values because we're about to add more flags that are conceptually closer to the existing ones than this one is. include/ * ctf-api.h (CTF_LINK_EMPTY_CU_MAPPINGS): New. libctf/ * ctf-impl.h (ctf_file_t): Improve comments. <ctf_link_cu_mapping>: Split into... <ctf_link_in_cu_mapping>: ... this... <ctf_link_out_cu_mapping>: ... and this. * ctf-create.c (ctf_serialize): Adjust. * ctf-open.c (ctf_file_close): Likewise. * ctf-link.c (ctf_create_per_cu): Look things up in the in_cu_mapping instead of the cu_mapping. (ctf_link_add_cu_mapping): The deduplicating link will define what happens if many FROMs share a TO. (ctf_link_add_cu_mapping): Create in_cu_mapping and out_cu_mapping. Do not create ctf_link_outputs here any more, or create per-CU dicts here: they are already created when needed. (ctf_link_one_variable): Log a debug message if we skip a variable due to its type being concealed in a CU-mapped link. (This is probably too common a case to make into a warning.) (ctf_link): Create empty per-CU dicts if requested.	6 years ago
Nick Alcock	8d2229ad1e	libctf, link: add lazy linking: clean up input members: err/warn cleanup This rather large and intertwined pile of changes does three things: First, it transitions from dprintf to ctf_err_warn for things the user might care about: this one file is the major impetus for the ctf_err_warn infrastructure, because things like file names are crucial in linker error messages, and errno values are utterly incapable of communicating them Second, it stabilizes the ctf_link APIs: you can now call ctf_link_add_ctf without a CTF argument (only a NAME), to lazily ctf_open the file with the given NAME when needed, and close it as soon as possible, to save memory. This is not an API change because a null CTF argument was prohibited before now. Since getting CTF directly from files uses ctf_open, passing in only a NAME requires use of libctf, not libctf-nobfd. The linker's behaviour is unchanged, as it still passes in a ctf_archive_t as before. This also let us fix a leak: we were opening ctf_archives and their containing ctf_files, then only closing the files and leaving the archives open. Third, this commit restructures the ctf_link_in_member argument used by the CTF linking machinery and adjusts its users accordingly. We drop two members: - arcname, which is difficult to construct and then only used in error messages (that were only dprintf()ed, so never seen!) - share_mode, since we store the flags passed to ctf_link (including the share mode) in a new ctf_file_t.ctf_link_flags to help dedup get hold of it We rename others whose existing names were fairly dreadful: - done_main_member -> done_parent, using consistent terminology for .ctf as the parent of all archive members - main_input_fp -> in_fp_parent, likewise - file_name -> in_file_name, likewise We add one new member, cu_mapped. Finally, we move the various frees of things like mapping table data to the top-level ctf_link, since deduplicating links will want to do that too. include/ * ctf-api.h (ECTF_NEEDSBFD): New. (ECTF_NERR): Adjust. (ctf_link): Rename share_mode arg to flags. libctf/ * Makefile.am: Set -DNOBFD=1 in libctf-nobfd, and =0 elsewhere. * Makefile.in: Regenerated. * ctf-impl.h (ctf_link_input_name): New. (ctf_file_t) <ctf_link_flags>: New. * ctf-create.c (ctf_serialize): Adjust accordingly. * ctf-link.c: Define ctf_open as weak when PIC. (ctf_arc_close_thunk): Remove unnecessary thunk. (ctf_file_close_thunk): Likewise. (ctf_link_input_name): New. (ctf_link_input_t): New value of the ctf_file_t.ctf_link_input. (ctf_link_input_close): Adjust accordingly. (ctf_link_add_ctf_internal): New, split from... (ctf_link_add_ctf): ... here. Return error if lazy loading of CTF is not possible. Change to just call... (ctf_link_add): ... this new function. (ctf_link_add_cu_mapping): Transition to ctf_err_warn. Drop the ctf_file_close_thunk. (ctf_link_in_member_cb_arg_t) <file_name> Rename to... <in_file_name>: ... this. <arcname>: Drop. <share_mode>: Likewise (migrated to ctf_link_flags). <done_main_member>: Rename to... <done_parent>: ... this. <main_input_fp>: Rename to... <in_fp_parent>: ... this. <cu_mapped>: New. (ctf_link_one_type): Adjuwt accordingly. Transition to ctf_err_warn, removing a TODO. (ctf_link_one_variable): Note a case too common to warn about. Report in the debug stream if a cu-mapped link prevents addition of a conflicting variable. (ctf_link_one_input_archive_member): Adjust. (ctf_link_lazy_open): New, open a CTF archive for linking when needed. (ctf_link_close_one_input_archive): New, close it again. (ctf_link_one_input_archive): Adjust for lazy opening, member renames, and ctf_err_warn transition. Move the empty_link_type_mapping call to... (ctf_link): ... here. Adjut for renamings and thunk removal. Don't spuriously fail if some input contains no CTF data. (ctf_link_write): ctf_err_warn transition. * libctf.ver: Remove not-yet-stable comment.	6 years ago
Nick Alcock	8b37e7b63e	libctf, ld, binutils: add textual error/warning reporting for libctf This commit adds a long-missing piece of infrastructure to libctf: the ability to report errors and warnings using all the power of printf, rather than being restricted to one errno value. Internally, libctf calls ctf_err_warn() to add errors and warnings to a list: a new iterator ctf_errwarning_next() then consumes this list one by one and hands it to the caller, which can free it. New errors and warnings are added until the list is consumed by the caller or the ctf_file_t is closed, so you can dump them at intervals. The caller can of course choose to print only those warnings it wants. (I am not sure whether we want objdump, readelf or ld to print warnings or not: right now I'm printing them, but maybe we only want to print errors? This entirely depends on whether warnings are voluminous things describing e.g. the inability to emit single types because of name clashes or something. There are no users of this infrastructure yet, so it's hard to say.) There is no internationalization here yet, but this at least adds a place where internationalization can be added, to one of ctf_errwarning_next or ctf_err_warn. We also provide a new ctf_assert() function which uses this infrastructure to provide non-fatal assertion failures while emitting an assert-like string to the caller: to save space and avoid needlessly duplicating unchanging strings, the assertion test is inlined but the print-things-out failure case is not. All assertions in libctf will be converted to use this machinery in future commits and propagate assertion-failure errors up, so that the linker in particular cannot be killed by libctf assertion failures when it could perfectly well just print warnings and drop the CTF section. include/ * ctf-api.h (ECTF_INTERNAL): Adjust error text. (ctf_errwarning_next): New. libctf/ * ctf-impl.h (ctf_assert): New. (ctf_err_warning_t): Likewise. (ctf_file_t) <ctf_errs_warnings>: Likewise. (ctf_err_warn): New prototype. (ctf_assert_fail_internal): Likewise. * ctf-inlines.h (ctf_assert_internal): Likewise. * ctf-open.c (ctf_file_close): Free ctf_errs_warnings. * ctf-create.c (ctf_serialize): Copy it on serialization. * ctf-subr.c (ctf_err_warn): New, add an error/warning. (ctf_errwarning_next): New iterator, free and pass back errors/warnings in succession. * libctf.ver (ctf_errwarning_next): Add. ld/ * ldlang.c (lang_ctf_errs_warnings): New, print CTF errors and warnings. Assert when libctf asserts. (lang_merge_ctf): Call it. (land_write_ctf): Likewise. binutils/ * objdump.c (ctf_archive_member): Print CTF errors and warnings. * readelf.c (dump_ctf_archive_member): Likewise.	6 years ago
Nick Alcock	ec388c16cd	libctf: error out on corrupt CTF with invalid header flags If corrupt CTF with invalid header flags is passed in, return the new error ECTF_FLAGS. include/ * ctf-api.h (ECTF_FLAGS): New. (ECTF_NERR): Adjust. * ctf.h (CTF_F_MAX): New. libctf/ * ctf-open.c (ctf_bufopen_internal): Diagnose invalid flags.	6 years ago
Nick Alcock	688d28f621	libctf, next: introduce new class of easier-to-use iterators The libctf machinery currently only provides one way to iterate over its data structures: ctf__iter functions that take a callback and an arg and repeatedly call it. This works, but if you are doing a lot of iteration it is really quite inconvenient: you have to package up your local variables into structures over and over again and spawn lots of little functions even if it would be clearer in a single run of code. Look at ctf-string.c for an extreme example of how unreadable this can get, with three-line-long functions proliferating wildly. The deduplicator takes this to the Nth level. It iterates over a whole bunch of things: if we'd had to use _iter-class iterators for all of them there would be twenty additional functions in the deduplicator alone, for no other reason than that the iterator API requires it. Let's do something better. strtok_r gives us half the design: generators in a number of other languages give us the other half. The _next API allows you to iterate over CTF-like entities in a single function using a normal while loop. e.g. here we are iterating over all the types in a dict: ctf_next_t i = NULL; int hidden; ctf_id_t id; while ((id = ctf_type_next (fp, &i, &hidden, 1)) != CTF_ERR) { /* do something with 'hidden' and 'id' / } if (ctf_errno (fp) != ECTF_NEXT_END) / iteration error / Here we are walking through the members of a struct with CTF ID 'struct_type': ctf_next_t i = NULL; ssize_t offset; const char name; ctf_id_t membtype; while ((offset = ctf_member_next (fp, struct_type, &i, &name, &membtype)) >= 0 { / do something with offset, name, and membtype / } if (ctf_errno (fp) != ECTF_NEXT_END) / iteration error / Like every other while loop, this means you have access to all the local variables outside the loop while inside it, with no need to tiresomely package things up in structures, move the body of the loop into a separate function, etc, as you would with an iterator taking a callback. ctf__next allocates 'i' for you on first entry (when it must be NULL), and frees and NULLs it and returns a _next-dependent flag value when the iteration is over: the fp errno is set to ECTF_NEXT_END when the iteartion ends normally. If you want to exit early, call ctf_next_destroy on the iterator. You can copy iterators using ctf_next_copy, which copies their current iteration position so you can remember loop positions and go back to them later (or ctf_next_destroy them if you don't need them after all). Each _next function returns an always-likely-to-be-useful property of the thing being iterated over, and takes pointers to parameters for the others: with very few exceptions all those parameters can be NULLs if you're not interested in them, so e.g. you can iterate over only the offsets of members of a structure this way: while ((offset = ctf_member_next (fp, struct_id, &i, NULL, NULL)) >= 0) If you pass an iterator in use by one iteration function to another one, you get the new error ECTF_NEXT_WRONGFUN back; if you try to change ctf_file_t in mid-iteration, you get ECTF_NEXT_WRONGFP back. Internally the ctf_next_t remembers the iteration function in use, various sizes and increments useful for almost all iterations, then uses unions to overlap the actual entities being iterated over to keep ctf_next_t size down. Iterators available in the public API so far (all tested in actual use in the deduplicator): /* Iterate over the members of a STRUCT or UNION, returning each member's offset and optionally name and member type in turn. On end-of-iteration, returns -1. / ssize_t ctf_member_next (ctf_file_t fp, ctf_id_t type, ctf_next_t it, const char name, ctf_id_t membtype); / Iterate over the members of an enum TYPE, returning each enumerand's NAME or NULL at end of iteration or error, and optionally passing back the enumerand's integer VALue. / const char ctf_enum_next (ctf_file_t fp, ctf_id_t type, ctf_next_t it, int val); /* Iterate over every type in the given CTF container (not including parents), optionally including non-user-visible types, returning each type ID and optionally the hidden flag in turn. Returns CTF_ERR on end of iteration or error. / ctf_id_t ctf_type_next (ctf_file_t fp, ctf_next_t *it, int flag, int want_hidden); /* Iterate over every variable in the given CTF container, in arbitrary order, returning the name and type of each variable in turn. The NAME argument is not optional. Returns CTF_ERR on end of iteration or error. / ctf_id_t ctf_variable_next (ctf_file_t fp, ctf_next_t it, const char name); /* Iterate over all CTF files in an archive, returning each dict in turn as a ctf_file_t, and NULL on error or end of iteration. It is the caller's responsibility to close it. Parent dicts may be skipped. Regardless of whether they are skipped or not, the caller must ctf_import the parent if need be. / ctf_file_t ctf_archive_next (const ctf_archive_t wrapper, ctf_next_t it, const char name, int skip_parent, int errp); ctf_label_next is prototyped but not implemented yet. include/ * ctf-api.h (ECTF_NEXT_END): New error. (ECTF_NEXT_WRONGFUN): Likewise. (ECTF_NEXT_WRONGFP): Likewise. (ECTF_NERR): Adjust. (ctf_next_t): New. (ctf_next_create): New prototype. (ctf_next_destroy): Likewise. (ctf_next_copy): Likewise. (ctf_member_next): Likewise. (ctf_enum_next): Likewise. (ctf_type_next): Likewise. (ctf_label_next): Likewise. (ctf_variable_next): Likewise. libctf/ * ctf-impl.h (ctf_next): New. (ctf_get_dict): New prototype. * ctf-lookup.c (ctf_get_dict): New, split out of... (ctf_lookup_by_id): ... here. * ctf-util.c (ctf_next_create): New. (ctf_next_destroy): New. (ctf_next_copy): New. * ctf-types.c (includes): Add <assert.h>. (ctf_member_next): New. (ctf_enum_next): New. (ctf_type_iter): Document the lack of iteration over parent types. (ctf_type_next): New. (ctf_variable_next): New. * ctf-archive.c (ctf_archive_next): New. * libctf.ver: Add new public functions.	6 years ago
Nick Alcock	2399827bfa	libctf: add ctf_ref This allows you to bump the refcount on a ctf_file_t, so that you can smuggle it out of iterators which open and close the ctf_file_t for you around the loop body (like ctf_archive_iter). You still can't use this to preserve a ctf_file_t for longer than the lifetime of its containing entity (e.g. ctf_archive). include/ * ctf-api.h (ctf_ref): New. libctf/ * libctf.ver (ctf_ref): New. * ctf-open.c (ctf_ref): Implement it.	6 years ago
Nick Alcock	9c23dfa5aa	libctf: add ctf_archive_count Another count that was otherwise unavailable without doing expensive operations. include/ * ctf-api.h (ctf_archive_count): New. libctf/ * ctf-archive.c (ctf_archive_count): New. * libctf.ver: New public function.	6 years ago

1 2 3 4 5 ...

1421 Commits (5890af36e5112bcbb8d7555e63570f68466e6944)