the Autoconf manual.
* configure.in: Call AC_HEADER_DIRENT. Remove dirent.h,
sys/ndir.h, sys/dir.h and ndir.h from call to AC_CHECK_HEADERS.
* configure: Regenerated.
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (validate_mips_insn, mips_ip): Recognize
the "+D" operand, which will be used only by the disassembler.
[ gas/testsuite/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0sel-names-mips32.d: New test.
* gas/mips/cp0sel-names-mips32r2.d: New test.
* gas/mips/cp0sel-names-mips64.d: New test.
* gas/mips/cp0sel-names-numeric.d: New test.
* gas/mips/cp0sel-names-sb1.d: New test.
* gas/mips/cp0sel-names.s: New test source file.
* gas/mips/mips.exp: Run new tests.
[ include/opcode/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips.h: Note that the "+D" operand type name is now used.
[ opcodes/ChangeLog ]
2002-12-31 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0sel_name): New structure.
(mips_cp0sel_names_mips3264, mips_cp0sel_names_mips3264r2)
(mips_cp0sel_names_sb1): New arrays.
(mips_arch_choice): New structure members "cp0sel_names" and
"cp0sel_names_len".
(mips_arch_choices): Add references to new cp0sel_names arrays
as appropriate, and make all existing entries reference
appropriate mips_XXX_names_numeric arrays rather than simply
using NULL.
(mips_cp0sel_names, mips_cp0sel_names_len): New variables.
(lookup_mips_cp0sel_name): New function.
(set_default_mips_dis_options): Set mips_cp0sel_names and
mips_cp0sel_names_len as appropriate. Remove now-unnecessary
checks for NULL register name arrays.
(parse_mips_dis_option): Likewise.
(print_insn_arg): Handle "+D" operand type.
* mips-opc.c (mips_builtin_opcodes): Add new "+D" variants
of mfc0, mtc0, dmfc0, and dmtc0 to print CP0+sel register
names symbolically.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/elf_arch_mips1.d: New test.
* gas/mips/elf_arch_mips2.d: New test.
* gas/mips/elf_arch_mips3.d: New test.
* gas/mips/elf_arch_mips4.d: New test.
* gas/mips/elf_arch_mips5.d: New test.
* gas/mips/elf_arch_mips32.d: New test.
* gas/mips/elf_arch_mips32r2.d: New test.
* gas/mips/elf_arch_mips64.d: New test.
* gas/mips/empty.s: New test source file.
* gas/mips/mips.exp: Run new tests.
* gas/mips/elf_ase_mips16.d: Change to use empty.s
* gas/mips/elf_ase_mips16.s: Remove.
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* aoutx.h (NAME(aout,machine_type)): Add bfd_mach_mipsisa32r2 case.
* archures.c (bfd_mach_mipsisa32r2): New define.
* bfd-in2.h: Regenerate.
* cpu-mips.c (I_mipsisa32r2): New enum value.
(arch_info_struct): Add entry for I_mipsisa32r2.
* elfxx-mips.c (elf_mips_isa, _bfd_elf_mips_mach)
(_bfd_mips_elf_print_private_bfd_data): Handle E_MIPS_ARCH_32R2.
(_bfd_mips_elf_final_write_processing): Add
bfd_mach_mipsisa32r2 case.
(_bfd_mips_elf_merge_private_bfd_data): Handle merging of
binaries marked as using MIPS32 Release 2.
[ binutils/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* doc/binutils.texi (objdump): Note MIPS HWR (Hardware Register)
changes in MIPS -M options.
[ gas/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* configure.in: Recognize mipsisa32r2, mipsisa32r2el, and
CPU variants.
* configure: Regenerate.
* config/tc-mips.c (ISA_HAS_DROR, ISA_HAS_ROR): New defines.
(macro_build): Handle "K" operand.
(macro2): Use ISA_HAS_DROR and ISA_HAS_ROR in the places where
CPU_HAS_DROR and CPU_HAS_ROR are currently used.
(mips_ip): New variable "lastpos", and implement "+A", "+B",
and "+C" operands for MIPS32 Release 2 ins/ext instructions.
Implement "K" operand for MIPS32 Release 2 rdhwr instruction.
(validate_mips_insn): Implement "+" as a way to extend the
allowed operands, and implement "K", "+A", "+B", and "+C"
operands.
(OPTION_MIPS32R2): New define.
(md_longopts): Add entry for OPTION_MIPS32R2.
(OPTION_ELF_BASE): Adjust to accomodate OPTIONS_MIPS32R2.
(md_parse_option): Handle OPTION_MIPS32R2.
(s_mipsset): Reimplement handling of ".set mipsN" options
and add support for ".set mips32r2".
(mips_cpu_info_table): Add entry for "mips32r2" (MIPS32 Release 2).
(md_show_usage): Document "-mips32r2" option.
* doc/as.texinfo: Document "-mips32r2" option.
* doc/c-mips.texi: Likewise.
[ gas/testsuite/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* gas/mips/cp0-names-mips32r2.d: New test.
* gas/mips/hwr-names-mips32r2.d: New test.
* gas/mips/hwr-names-numeric.d: New test.
* gas/mips/hwr-names.s: New test source file.
* gas/mips/mips32r2.d: New test.
* gas/mips/mips32r2.s: New test source file.
* gas/mips/mips32r2-ill.l: New test.
* gas/mips/mips32r2-ill.s: New test source file.
* gas/mips/mips.exp: Add mips32r2 architecture data array
entry. Run new tests mentioned above.
[ include/elf/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h (E_MIPS_ARCH_32R2): New define.
[ include/opcode/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips.h: Document "+" as the start of two-character operand
type names, and add new "K", "+A", "+B", and "+C" operand types.
(OP_MASK_INSMSB, OP_SH_INSMSB, OP_MASK_EXTMSB)
(OP_SH_EXTMSB, INSN_ISA32R2, ISA_MIPS32R2, CPU_MIPS32R2): New
defines.
[ opcodes/ChangeLog ]
2002-12-30 Chris Demetriou <cgd@broadcom.com>
* mips-dis.c (mips_cp0_names_mips3264r2, mips_hwr_names_numeric)
(mips_hwr_names_mips3264r2): New arrays.
(mips_arch_choice): New "hwr_names" member.
(mips_arch_choices): Adjust for structure change, and add a new
entry for "mips32r2" ISA.
(mips_hwr_names): New variable.
(set_default_mips_dis_options): Set mips_hwr_names.
(parse_mips_dis_option): New "hwr-names" option which sets
mips_hwr_names, and adjust "reg-names=ARCH" to set mips_hwr_names.
(print_insn_arg): Change return type to "int"
and use that to indicate number of characters consumed.
Add support for "+" operand extension character, "+A", "+B",
"+C", and "K" operands.
(print_insn_mips): Adjust for changes to print_insn_arg.
(print_mips_disassembler_options): Adjust for "hwr-names"
addition and "reg-names" change.
* mips-opc (I33): New define (shorthand for INSN_ISA32R2).
(mips_builtin_opcodes): Note that "nop" and "ssnop" are special
forms of "sll". Add new MIPS32 Release 2 instructions: ehb,
di, ei, ext, ins, jr.hb, jalr.hb, mfhc1, mfhc2, mthc1, mthc2,
rdhwr, rdpgpr, seb, seh, synci, wrpgpr, wsbh.
Note that hardware rotate instructions (ror, rorv) can be
used on MIPS32 Release 2, and add the official mnemonics
for them (rotr, rotrv) and the similar "rotl" mnemonic for
left-rotate.
(multilib.ts): ... this. Moved into...
(multilib.out): ... this. Don't use sub-make.
($(BUILD_SUBDIR)/[+module+]/Makefile, [+module+]/Makefile,
$(TARGET_SUBDIR)/[+module+]/Makefile, gcc/Makefile): Moved into...
(configure-build-[+module+], configure-[+module+],
configure-target-[+module+], configure-gcc): ... these. Test
for Makefile existence. Drop config.status from dependencies.
* Makefile.in: Rebuilt.
* configure.in: Move gcc-version-trigger to the end of
ac_configure_args. Add comments to maybedep.tmp and
serdep.tmp. Introduce --disable-serial-configure. Remove
nonopt from baseargs, matching and removing corresponding
whitespace while at it.
* configure: Rebuilt.
(assign_file_positions_for_segments): Only adjust off/voff
for increased alignment in PT_LOAD or PT_NOTE segment,
but adjust p_filesz for .tbss too. in PT_LOAD consider
.tbss to have zero memory size.
(copy_private_bfd_data) [SECTION_SIZE]: Define.
[IS_CONTAINED_BY_VMA, IS_CONTAINED_BY_LMA]: Use it.
[INCLUDE_SECTION_IN_SEGMENT]: Only put SHF_TLS sections
into PT_TLS segment. Never put SHF_TLS sections in
segments other than PT_TLS or PT_LOAD.
* elf64-alpha.c (elf64_alpha_finish_dynamic_sections): Clear .plt
sh_entsize.
(NCN_STRICT_CHECK_TOOL): If program is not found and
value-if-not-found is empty, use ${ncn_tool_prefix}$2 or $2,
depending on whether build != host or not.
(NCN_STRICT_CHECK_TARGET_TOOL): Ditto, with the target prefix.
program_transform_name to standard idiom.
(AUTOGEN, AUTOCONF): Define.
(Makefile.in): Use $(AUTOGEN).
(Makefile): Depend on config.status, and use autoconf-style rule to
build it. Move original commands to...
(config.status): ... this new target.
(configure): Add $(srcdir). Depend on config/acx.m4. Use
$(AUTOCONF).
* Makefile.in: Rebuilt.
* gas/mips/mips.exp: Define the notion of an "architecture data
array," add comments indicating how to add a new architecture and
suggestions for adding new tests. Populate the architecture data
array with many known architectures and convert many tests to
be run for multiple architectures.
(mips_arches): New global array.
(mips_arch_create, mips_arch_list_all, mips_arch_data)
(mips_arch_displayname, mips_arch_properties)
(mips_arch_as_flags, mips_arch_objdump_flags, mips_arch_matches)
(mips_arch_list_matching): New functions to operate on mips_arches.
(run_dump_test_arch, run_dump_test_arches, run_list_test_arch)
(run_list_test_arches): New functions.
(run_list_test): Document and add an optional "test name" argument.
* gas/mips/abs.d: Remove CPU-specific assembler and objdump flags,
and CPU names from test names.
* gas/mips/add.d: Likewise.
* gas/mips/and.d: Likewise.
* gas/mips/dli.d: Likewise.
* gas/mips/jal-empic-elf-2.d: Likewise.
* gas/mips/jal-empic-elf-3.d: Likewise.
* gas/mips/jal-empic-elf.d: Likewise.
* gas/mips/lb-svr4pic.d: Likewise.
* gas/mips/lb.d: Likewise.
* gas/mips/mips32.d: Likewise.
* gas/mips/mips4.d: Likewise.
* gas/mips/mips64.d: Likewise.
* gas/mips/rol-hw.d: Likewise.
* gas/mips/rol.d: Likewise.
* gas/mips/rol64-hw.d: Likewise.
* gas/mips/rol64.d: Likewise.
* gas/mips/elf-jal.d: Likewise. Also, indicate ELF in test name.
* gas/mips/mips64-mdmx.d: Tweak printed name to indicate that this
test uses the -mdmx flag.
* gas/mips/mips64-mips3d.d: Tweak printed name to indicate that
this test uses the -mips3d flag.
* gas/mips/mips64-mips3d-incl.d: New file.
* fhandler_console.cc (fhandler_console::send_winch_maybe): If appropriate,
call tty master function to handle screen size change.
* fhandler_tty.cc (fhandler_tty_master::set_winsize): New function.
(fhandler_tty_master::init): Call set_winsize to set initial screen size.
of console in which tty is operating.
(process_input): Semi-revert previous change. Need to just use current
terminfo settings since this function is running in a thread, blocked when the
terminfo changes.
* hppa-tdep.c: Add some missing forward declarations.
(frameless_function_invocation): Prefix the function name
by "hppa_" to avoid polluting the namespace. Update all calls
to use the new function name.
(saved_pc_after_call): Ditto.
(init_extra_frame_info): Ditto.
(frame_chain): Ditto.
(push_dummy_frame): Ditto.
(target_read_pc): Ditto.
(target_write_pc): Ditto.
(in_solib_call_trampoline): Ditto.
(in_solib_return_trampoline): Ditto.
(skip_trampoline_code): Ditto.
(hppa_read_fp): New function, renamed from target_read_fp.
(hppa_target_read_fp): New function, using hppa_read_fp.
This function conforms to the function profile for the
READ_FP gdbarch method.
(hppa_extract_struct_value_address): New function, extracted
from the definition of the DEPRECATED_EXTRACT_STRUCT_VALUE_ADDRESS
macro.
(hppa_frame_num_args): New function.
(hppa_gdbarch_init): Setup the gdbarch vector for the hppa target.
* config/pa/tm-hppa.h: Wrap around all gdbarch-eligible macros
inside "#if !GDB_MULTI_ARCH ... #endif" conditional, in preparation
for the switch to multiarch partial.
Update some of the macros definitions to match some changes
described above in the name of the function they are calling.
(PUSH_DUMMY_FRAME): Add a FIXME explaining why this macro will
not be straightforward to convert. Do now wrap it inside
"#if !... #endif" to remember that this macro has still not
been taken care of.
(FIX_CALL_DUMMY): Likewise.
* hppa-tdep.c: (hppa_register_raw_size): New function replacing
the body of macro REGISTER_RAW_SIZE.
* hppa-hpux-tdep.c: Add new functions replacing macro bodies from
config/pa/tm-hppah.h. These functions will be used to initialize
the gdbarch structure.
(hppa_hpux_pc_in_sigtramp): New function.
(hppa_hpux_frame_saved_pc_in_sigtramp): New function.
(hppa_hpux_frame_base_before_sigtramp): New function.
(hppa_hpux_frame_find_saved_regs_in_sigtramp): New function.
Add gdbcore.h #include.
* config/pa/tm-hppa.h (REGISTER_RAW_SIZE): Change the definition
of this gdbarch-eligible macro to a call to the new associated
function.
* config/pa/tm-hppah.h (PC_IN_SIGTRAMP): Likewise.
(FRAME_SAVED_PC_IN_SIGTRAMP): Change the definition of this macro
into a call to the new associated function.
(FRAME_BASE_BEFORE_SIGTRAMP): Likewise.
(FRAME_FIND_SAVED_REGS_IN_SIGTRAMP): Likewise.
* Makefile.in (hppa-hpux-tdep.o): Add dependency on gdbcore.h.
Tom Tromey
Chris Demetriou
Andreas Schwab
Mark Kettenis
Nick Clifton
Adam Fedor
Daniel Jacobowitz
gdbadmin
Alan Modra
Kazu Hirata
Alexandre Oliva
Jakub Jelinek
Nathanael Nerode
Christopher Faylor
Joel Brobecker