binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Andrew Burgess	43d66c95c8	ld/testing: run_dump_test can now check linker mapfiles. Add a new option 'map' to the ld run_dump_test mechanism. When the 'map' option is given run_dump_test will ensure that there is a -Map=MAPFILE present in the linker command line, adding one if needed. The MAPFILE is then compared with the file passed to the new 'map' option using the regexp_diff function. This should make it slightly easier to write tests that check the linker mapfile output. The only test I found that already compares mapfile content is updated to use the new mechanism. ld/testsuite/ChangeLog: * ld-scripts/overlay-size.d: Add 'map' option. * ld-scripts/overlay-size.exp: Remove manual check of mapfile. * lib/ld-lib.exp (run_dump_test): Add support for new 'map' option, checking linker mapfile output.	12 years ago
Alan Modra	23283c1be0	Reorder more powerpc64 sections for -z relro This moves .got too, which requires .sdata and .sbss to move with it, because these sections share addressing via the toc pointer and with small-model code must be within a 16-bit signed offset. .plt, .iplt and .branch_lt must also be moved since they are addressed via a 32-bit offset from the toc pointer, and we might have a very large .data section. This change means we may have some bss style sections before the data segment, necessitating another PT_LOAD header. Also, since _edata is defined at the end of the data segment it's possible with an empty .data to have _edata at the end of .plt which looks a little unusual since .plt is a bss style section. That should only happen rarely in real world binaries, but does occur in the ld testsuite. ld/ * emulparams/elf64ppc.sh (BSS_PLT): Don't define. (OTHER_READWRITE_SECTIONS): Move .branch_lt to.. (OTHER_RELRO_SECTIONS_2): ..here. (DATA_GOT, SEPARATE_GOTPLT, DATA_SDATA, DATA_PLT, PLT_BEFORE_GOT): Define. * scripttempl/elf.sc: Handle DATA_SDATA and DATA_GOT/DATA_PLT/ PLT_BEFORE_GOT combination. (DATA_GOT, SDATA_GOT): Don't define if either is already defined. ld/testsuite/ * ld-powerpc/ambiguousv1.d, * ld-powerpc/ambiguousv1b.d, * ld-powerpc/ambiguousv2.d, * ld-powerpc/ambiguousv2b.d, * ld-powerpc/elfv2exe.d, * ld-powerpc/elfv2so.d, * ld-powerpc/tlsexe.r, * ld-powerpc/tlsexetoc.r, * ld-powerpc/tlsso.r, * ld-powerpc/tlstocso.r: Update.	12 years ago
Alan Modra	3e2b0f3116	Reorder powerpc64 sections for -z relro More sections can be read-only after relocation. .opd is an obvious candidate. * emulparams/elf64ppc.sh (OTHER_READWRITE_SECTIONS): Move .opd to.. (OTHER_RELRO_SECTIONS_2): ..here, new define. * scripttempl/elf.sc: Add OTHER_RELRO_SECTIONS_2.	12 years ago
Chung-Lin Tang	03d5b77300	Define elf_backend_default_execstack as 0 for Nios II.	12 years ago
Alan Modra	10ab94ebf8	Fix pr17615 testcase PR ld/17615 * ld-elf/pr17615.d: Match .sbss too.	12 years ago
Alan Modra	1c9177d9a5	Fix garbage collection of common symbols for powerpc64 I forgot powerpc64 has its own gc_mark_dynamic_ref. PR ld/17615 * elf64-ppc.c (ppc64_elf_gc_mark_dynamic_ref): Don't drop ELF_COMMON_DEF syms.	12 years ago
GDB Administrator	3cd0754799	Automatic date update in version.in	12 years ago
H.J. Lu	3e2aa5bbd3	Add a testcase for PR ld/17615 PR ld/17615 * ld-elf/pr17615.d: New file. * ld-elf/pr17615.s: Likewise.	12 years ago
Eli Zaretskii	63413d8587	Don't use windows-termcap.c when linking against a curses library gdb/ 2015-01-17 Eli Zaretskii <eliz@gnu.org> * configure.ac [mingw32]: Only add windows-termcap.o to CONFIG_OBS if not building with a curses library. * configure: Regenerate. * windows-termcap.c: Include defs.h. Make the whole body empty if either one of HAVE_CURSES_H or HAVE_NCURSES_H or HAVE_NCURSES_NCURSES_H is defined.	12 years ago
Joel Brobecker	1f99f6d068	strerror.c: Do not declare sys_nerr or sys_errlist if already macros This fixes a MinGW warning in libiberty/strerror.c. 2015-01-19 Eli Zaretskii <eliz@gnu.org> * strerror.c <sys_nerr, sys_errlist>: Declare only if they aren't macros.	12 years ago
Alan Modra	c4621b339e	Fix garbage collection of common symbols Running lang_common before garbage collection means slightly less work in garbage collection code, since common symbols should no longer appear there. It does have the side effect of keeping linker script symbols (at least those defined outside of sections) global too, hence some testsuite churn. bfd/ PR 17165 * elf-bfd.h (ELF_COMMON_DEF): Note that this might be true for linker script assignments too. * elflink.c (elf_gc_sweep_symbol): Don't drop ELF_COMMON_DEF syms. (bfd_elf_gc_mark_dynamic_ref_symbol): Similarly. ld/ PR 17165 * ldlang.c (lang_process): Run lang_common before lang_gc_sections. ld/testsuite/ * ld-gc/pr14265.d, * ld-cris/tls-gc-68.d, * ld-cris/tls-gc-69.d, * ld-cris/tls-gc-70.d, * ld-cris/tls-gc-71.d, * ld-cris/tls-gc-75.d, * ld-cris/tls-gc-76.d, * ld-cris/tls-gc-79.d, * ld-mmix/bpo-10.d, * ld-mmix/bpo-11.d: Update.	12 years ago
Alan Modra	740bdc67c0	Extend .reloc to accept some BFD_RELOCs Tests that bfd_perform_reloc doesn't freak over a NONE reloc at end of section. gas/ * read.c (s_reloc): Match BFD_RELOC_NONE, BFD_RELOC{8,16,32,64}. * write.c (get_frag_for_reloc): Allow match just past end of frag. gas/testsuite/ * gas/all/none.s, * gas/all/none.d: New test. * gas/all/gas.exp: Run it.	12 years ago
Alan Modra	0ba38529f2	More fixes related to NONE relocs * elf32-bfin.c (bfin_bfd_reloc_type_lookup): Correct loop iteration to allow return of first howto. * elf32-fr30.c (fr30_reloc_type_lookup): Likewise. * elf32-m32c.c (m32c_reloc_type_lookup): Likewise. * elf32-moxie.c (moxie_reloc_type_lookup): Likewise. * elf32-or1k.c (or1k_reloc_type_lookup): Likewise. * elf32-rl78.c (rl78_reloc_type_lookup): Likewise. * elf32-rx.c (rx_reloc_type_lookup): Likewise. * elf32-tilepro.c (tilepro_reloc_type_lookup): Likewise. * elf32-xstormy16.c (xstormy16_reloc_type_lookup): Likewise. * elfxx-tilegx.c (tilegx_reloc_type_lookup): Likewise. * elf32-nios2.c (nios2_reloc_map): Add mapping for R_NIOS2_NONE. * elf32-spu.c (spu_elf_bfd_to_reloc_type): Allow return of R_SPU_NONE. (spu_elf_reloc_type_lookup): Adjust to suit.	12 years ago
Alan Modra	6346d5ca43	Fallout from recent bfd_reloc_outofrange changes Commit `ec93045b` and `cd21f5da` introduced a large number of tic4x and tic54x regressions, due to the new checks being wrong for targets with octets_per_byte != 1. To fix that I introduced a new bfd_get_section_limit_octets and performed the check on octets rather than byte adresses, reducing the number of bfd_octets_per_byte calls. bfd_octets_per_byte is rather expensive.. I then wondered why the same bfd_reloc_outofrange check added to bfd_perform_relocation wasn't also added to bfd_install_relocation. The two functions are virtually identical and ought to remain that way. However, adding the same check to bfd_install_relocation resulted in ld-elf "FAIL Link eh-group.o to eh-group" on many ELF targets, including x64_64-linux. The reason being that eh-group.o has NONE relocs at the end of a section, and most targets give NONE relocs a non-zero size. So if we are to keep the new outofrange check it appears that NONE relocs must have a zero size. * bfd-in.h (bfd_get_section_limit_octets): New define, extracted from.. (bfd_get_section_limit): ..here. * reloc.c (bfd_perform_relocation): Correct bfd_reloc_outofrange check. (bfd_install_relocation, _bfd_final_link_relocate): Add same check here. * elf32-sh.c (sh_elf_reloc): Correct bfd_reloc_outofrange check. * elf32-ppc.c (ppc_elf_addr16_ha_reloc): Remove duplicated bfd_reloc_outofrange check. * bfd-in2.h: Regenerate. * cpu-ns32k.c (_bfd_do_ns32k_reloc_contents): Return bfd_reloc_ok on zero size relocs. * ecoff.c (ecoff_reloc_link_order): Likewise. * elf32-nds32.c (nds32_relocate_contents): Likewise. * elfxx-aarch64.c (_bfd_aarch64_elf_put_addend): Likewise. * reloc.c (_bfd_relocate_contents): Don't bomb on zero size relocs. (_bfd_clear_contents): Likewise. * elfxx-mips.c (mips_elf_obtain_contents): Likewise. (mips_elf_perform_relocation): Likewise. * aoutx.h (aout_link_reloc_link_order): Allow for NULL return from malloc on zero size alloc. * cofflink.c (_bfd_coff_reloc_link_order): Likewise. * elflink.c (elf_reloc_link_order): Likewise. * linker.c (_bfd_generic_reloc_link_order): Likewise. * pdp11.c (aout_link_reloc_link_order): Likewise. * xcofflink.c (xcoff_reloc_link_order): Likewise. * aoutx.h (howto_table_ext): Ensure NONE relocs have size 3, bitsize 0, and complain_overflow_dont. * coff-sparc.c (coff_sparc_howto_table): Likewise. * elf-hppa.h (elf_hppa_howto_table): Likewise. * elf-m10200.c (elf_mn10200_howto_table): Likewise. * elf-m10300.c (elf_mn10300_howto_table): Likewise. * elf32-arc.c (elf_arc_howto_table): Likewise. * elf32-arm.c (elf32_arm_howto_table_1): Likewise. * elf32-avr.c (elf_avr_howto_table): Likewise. * elf32-bfin.c (bfin_howto_table): Likewise. * elf32-cr16.c (cr16_elf_howto_table): Likewise. * elf32-cris.c (cris_elf_howto_table): Likewise. * elf32-crx.c (crx_elf_howto_table): Likewise. * elf32-d10v.c (elf_d10v_howto_table): Likewise. * elf32-d30v.c (elf_d30v_howto_table): Likewise. * elf32-dlx.c (dlx_elf_howto_table): Likewise. * elf32-epiphany.c (epiphany_elf_howto_table): Likewise. * elf32-fr30.c (fr30_elf_howto_table): Likewise. * elf32-frv.c (elf32_frv_howto_table): Likewise. * elf32-h8300.c (h8_elf_howto_table): Likewise. * elf32-i370.c (i370_elf_howto_raw): Likewise. * elf32-i386.c (elf_howto_table): Likewise. * elf32-i860.c (elf32_i860_howto_table): Likewise. * elf32-i960.c (elf32_i960_relocate): Likewise. * elf32-ip2k.c (ip2k_elf_howto_table): Likewise. * elf32-iq2000.c (iq2000_elf_howto_table): Likewise. * elf32-lm32.c (lm32_elf_howto_table): Likewise. * elf32-m32c.c (m32c_elf_howto_table): Likewise. * elf32-m32r.c (m32r_elf_howto_table): Likewise. * elf32-m68hc11.c (elf_m68hc11_howto_table): Likewise. * elf32-m68hc12.c (elf_m68hc11_howto_table): Likewise. * elf32-m68k.c (howto_table): Likewise. * elf32-mcore.c (mcore_elf_howto_raw): Likewise. * elf32-mep.c (mep_elf_howto_table): Likewise. * elf32-metag.c (elf_metag_howto_table): Likewise. * elf32-microblaze.c (microblaze_elf_howto_raw): Likewise. * elf32-mips.c (elf_mips_howto_table_rel): Likewise. * elf32-moxie.c (moxie_elf_howto_table): Likewise. * elf32-msp430.c (elf_msp430_howto_table): Likewise. * elf32-mt.c (mt_elf_howto_table): Likewise. * elf32-nds32.c (nds32_elf_howto_table): Likewise. * elf32-nios2.c (elf_nios2_howto_table_rel): Likewise. * elf32-or1k.c (or1k_elf_howto_table): Likewise. * elf32-pj.c (pj_elf_howto_table): Likewise. * elf32-ppc.c (ppc_elf_howto_raw): Likewise. * elf32-rl78.c (rl78_elf_howto_table): Likewise. * elf32-rx.c (rx_elf_howto_table): Likewise. * elf32-s390.c (elf_howto_table): Likewise. * elf32-score.c (elf32_score_howto_table): Likewise. * elf32-score7.c (elf32_score_howto_table): Likewise. * elf32-sh-relocs.h (R_SH_NONE): Likewise. * elf32-spu.c (elf_howto_table): Likewise. * elf32-tic6x.c (elf32_tic6x_howto_table): Likewise. * elf32-tilepro.c (tilepro_elf_howto_table): Likewise. * elf32-v850.c (v850_elf_howto_table): Likewise. * elf32-vax.c (howto_table): Likewise. * elf32-visium.c (visium_elf_howto_table): Likewise. * elf32-xc16x.c (xc16x_elf_howto_table): Likewise. * elf32-xgate.c (elf_xgate_howto_table): Likewise. * elf32-xstormy16.c (xstormy16_elf_howto_table): Likewise. * elf32-xtensa.c (elf_howto_table): Likewise. * elf64-alpha.c (elf64_alpha_howto_table): Likewise. * elf64-mips.c (mips_elf64_howto_table_rel): Likewise. * elf64-mmix.c (elf_mmix_howto_table): Likewise. * elf64-ppc.c (ppc64_elf_howto_raw): Likewise. * elf64-s390.c (elf_howto_table): Likewise. * elf64-sh64.c (sh_elf64_howto_table): Likewise. * elf64-x86-64.c (x86_64_elf_howto_table): Likewise. * elfn32-mips.c (elf_mips_howto_table_rel): Likewise. * elfnn-aarch64.c (elfNN_aarch64_howto_table): Likewise. (elfNN_aarch64_howto_none): Likewise. * elfxx-ia64.c (ia64_howto_table): Likewise. * elfxx-sparc.c (_bfd_sparc_elf_howto_table): Likewise. * elfxx-tilegx.c (tilegx_elf_howto_table): Likewise. * nlm32-sparc.c (nlm32_sparc_howto_table): Likewise.	12 years ago
Joel Brobecker	16d8013cf7	Fix ARI warning in rs6000-tdep.c::rs6000_gdbarch_init. gdb/ChangeLog: * rs6000-tdep.c (rs6000_gdbarch_init): Move divide operator from end of line to start of next line.	12 years ago
GDB Administrator	c039f17c35	Automatic date update in version.in	12 years ago
GDB Administrator	04edc7a3d9	Automatic date update in version.in	12 years ago
Wei-cheng Wang	cf90fd9a07	Skip-trampoline for PowerPC reverse-stepping.	12 years ago
Wei-cheng Wang	b4cdae6fe5	Reverse debugging for PowerPC.	12 years ago
Wei-cheng Wang	2608dbf8a3	Epilogue unwinder for PowerPC.	12 years ago
GDB Administrator	07d57b544c	Automatic date update in version.in	12 years ago
Eli Zaretskii	2ef60e94e7	Really add a prototype for tui_rehighlight_all.	12 years ago
Sergio Durigan Junior	4c347be60a	Fix nat/linux-personality.c regression on RHEL-5 This commit fixes the regression on RHEL-5 systems introduced by nat/linux-personality.c's check of HAVE_DECL_ADDR_NO_RANDOMIZE. RHEL-5 systems define HAVE_DECL_ADDR_NO_RANDOMIZE as zero, so we cannot use #ifndef; instead this patch uses the "#if !" construction. The regression was reported by Ulrich Weigand here: <https://sourceware.org/ml/gdb-patches/2015-01/msg00458.html> gdb/ChangeLog 2015-01-16 Sergio Durigan Junior <sergiodj@redhat.com> * nat/linux-personality.c: Replace "#ifndef HAVE_DECL_ADDR_NO_RANDOMIZE" by "#if !HAVE_DECL_ADDR_NO_RANDOMIZE", fixing a regression in RHEL-5 systems.	12 years ago
Eli Zaretskii	c54da50d66	Fix an erroneous commentary. gdb/ 2015-01-16 Eli Zaretskii <eliz@gnu.org> * tui/tui-win.c (tui_set_tab_width_command): Fix the commentary.	12 years ago
Eli Zaretskii	6cdb25f4df	Make setting TUI border attributes take effect immediately gdb/ 2015-01-16 Eli Zaretskii <eliz@gnu.org> * tui/tui-win.c (tui_rehighlight_all, tui_set_var_cmd): New functions. (_initialize_tui_win) <border-kind, border-mode>: <active-border-mode>: Use tui_set_var_cmd as the "set" function. * tui/tui-win.h: Add prototype for tui_rehighlight_all.	12 years ago
Eli Zaretskii	cb86fcc13b	Make the change of tab size in TUI mode effective immediately gdb/ChangeLog: 2015-01-16 Eli Zaretskii <eliz@gnu.org> * tui/tui-win.c (tui_set_tab_width_command): Delete and recreate the source and the disassembly windows, to show the effect of the changed tab size immediately.	12 years ago
Eli Zaretskii	bf555842fc	Fix TUI-related documentation. tui/tui-win.c (tui_scroll_left_command, tui_scroll_right_command): Doc fix. doc/gdb.texinfo (TUI Commands): Document the possible values of NAME argument to 'winheight' command. Explain the effect of 'tabset' setting better.	12 years ago
Andreas Krebbel	1e2e8c529c	S/390: Add support for IBM z13. - 32 128 bit vector registers (overlapping with the existing 16 64 bit floating point registers) - vector double instructions - vector integer instructions - scalar vector instructions (allowing to have more floating point registers for scalar operations) - vector string instructions gas/ChangeLog: * config/tc-s390.c (struct pd_reg): Remove. (pre_defined_registers): Remove. (REG_NAME_CNT): Remove. (reg_name_search): Calculate the register number instead of doing a lookup. (register_name, tc_s390_regname_to_dw2regnum): Adopt to the new reg_name_search signature. (s390_parse_cpu): Support the new arch string z13. (s390_insert_operand): Support for vector registers with the extra field for the fifth bit of each vector register operand. (md_gather_operand): Adjust to the new handling of optional parameters. * doc/as.texinfo: Document the z13 cpu string. gas/testsuite/ChangeLog: * gas/s390/esa-g5.d: Add a variant without the optional operand. * gas/s390/esa-g5.s: Likewise. * gas/s390/esa-z9-109.d: Likewise. * gas/s390/esa-z9-109.s: Likewise. * gas/s390/zarch-z9-109.d: Likewise. * gas/s390/zarch-z9-109.s: Likewise. * gas/s390/zarch-z10.d: For variants with a zero optional argument it is not dumped by objdump anymore. * gas/s390/zarch-zEC12.d: Likewise. * gas/s390/zarch-z13.d: New file. * gas/s390/zarch-z13.s: New file. * gas/s390/s390.exp: Run the test for the z13 files. include/opcode/ChangeLog: * s390.h (s390_opcode_cpu_val): Add S390_OPCODE_Z13. ld/testsuite/ChangeLog: * ld-s390/tlsbin.dd: The nopr register operand is optional and not printed if 0 anymore. opcodes/ChangeLog: * s390-dis.c (s390_extract_operand): Support vector register operands. (s390_print_insn_with_opcode): Support new operands types and add new handling of optional operands. * s390-mkopc.c (s390_opcode_mode_val, s390_opcode_cpu_val): Remove and include opcode/s390.h instead. (struct op_struct): New field `flags'. (insertOpcode, insertExpandedMnemonic): New parameter `flags'. (dumpTable): Dump flags. (main): Parse flags from the s390-opc.txt file. Add z13 as cpu string. * s390-opc.c: Add new operands types, instruction formats, and instruction masks. (s390_opformats): Add new formats for .insn. * s390-opc.txt: Add new instructions.	12 years ago
Eli Zaretskii	9f2850baa3	Leave more space in TUI mode for thread ID. gdb/tui/tui-data.h (LINE_PREFIX): Make shorter (MAX_PID_WIDTH): Enlarge from 14 to 19, to leave enough space for "Thread NNNNN.XXXX" thread ID notation on Windows.	12 years ago
Jan Kratochvil	95761b2d9c	Fix gcc-5 compilation With gcc-5.0 pre-release one gets: hppa-tdep.c: In function ‘inst_saves_gr’: hppa-tdep.c:1406:30: error: comparison of constant ‘9’ with boolean expression is always false [-Werror=bool-compare] I find the misplaced parentheses obvious. gdb/ChangeLog 2015-01-16 Jan Kratochvil <jan.kratochvil@redhat.com> Fix gcc-5 compilation. * hppa-tdep.c (inst_saves_gr): Fix parentheses typo.	12 years ago
GDB Administrator	f5818f7d80	Automatic date update in version.in	12 years ago
Sergio Durigan Junior	8cc73a3902	Move code to disable ASR to nat/ This patch moves the shared code present on gdb/linux-nat.c:linux_nat_create_inferior and gdb/gdbserver/linux-low.c:linux_create_inferior to nat/linux-personality.c. This code is responsible for disabling address space randomization based on user setting, and using <sys/personality.h> to do that. I decided to put the prototype of the maybe_disable_address_space_randomization on nat/linux-osdata.h because it seemed the best place to put it. I regression-tested this patch on Fedora 20 x86_64, and found no regressions. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (HFILES_NO_SRCDIR): Add nat/linux-personality.h. (linux-personality.o): New rule. * common/common-defs.h: Include <stdint.h>. * config/aarch64/linux.mh (NATDEPFILES): Include linux-personality.o. * config/alpha/alpha-linux.mh (NATDEPFILES): Likewise. * config/arm/linux.mh (NATDEPFILES): Likewise. * config/i386/linux64.mh (NATDEPFILES): Likewise. * config/i386/linux.mh (NATDEPFILES): Likewise. * config/ia64/linux.mh (NATDEPFILES): Likewise. * config/m32r/linux.mh (NATDEPFILES): Likewise. * config/m68k/linux.mh (NATDEPFILES): Likewise. * config/mips/linux.mh (NATDEPFILES): Likewise. * config/pa/linux.mh (NATDEPFILES): Likewise. * config/powerpc/linux.mh (NATDEPFILES): Likewise. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Likewise. * config/powerpc/spu-linux.mh (NATDEPFILES): Likewise. * config/s390/linux.mh (NATDEPFILES): Likewise. * config/sparc/linux64.mh (NATDEPFILES): Likewise. * config/sparc/linux.mh (NATDEPFILES): Likewise. * config/tilegx/linux.mh (NATDEPFILES): Likewise. * config/xtensa/linux.mh (NATDEPFILES): Likewise. * defs.h: Remove #include <stdint.h> (moved to common/common-defs.h). * linux-nat.c: Include nat/linux-personality.h. Remove #include <sys/personality.h>; do not define ADDR_NO_RANDOMIZE (moved to nat/linux-personality.c). (linux_nat_create_inferior): Remove code to disable address space randomization (moved to nat/linux-personality.c). Create cleanup to disable address space randomization. * nat/linux-personality.c: New file. * nat/linux-personality.h: Likewise. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (SFILES): Add linux-personality.c. (linux-personality.o): New rule. * configure.srv (srv_linux_obj): Add linux-personality.o to the list of objects to be built. * linux-low.c: Include nat/linux-personality.h. (linux_create_inferior): Remove code to disable address space randomization (moved to ../nat/linux-personality.c). Create cleanup to disable address space randomization.	12 years ago
Sergio Durigan Junior	fb23d55442	Move safe_strerror to common/ This patch moves safe_strerror from the gdb/{posix,mingw}-hdep.c files to the respective common/{posix,mingw}-strerror.c files. This is a preparation for the next patch, which shares a common code (to disable address space randomization when creating a new inferior). The patch has been regtested on Fedora 20 x86_64, and no regressions were found. gdb/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (ALLDEPFILES): Including common/mingw-strerror.c and common/posix-strerror.c. (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * common/common-utils.h (safe_strerror): Move prototype to here, from utils.h. * common/common.host: New file. * common/mingw-strerror.c: Likewise. * common/posix-strerror.c: Likewise. * configure: Regenerated. * configure.ac: Source common/common.host. Add variable common_host_obs to gdb_host_obs. * contrib/ari/gdb_ari.sh: Mention gdb/common/mingw-strerror.c and gdb/common/posix-strerror.c when warning about the use of strerror. * mingw-hdep.c (safe_strerror): Remove definition; move it to common/mingw-strerror.c. * posix-hdep.c (safe_strerror): Remove definition; move it to common/posix-hdep.c. * utils.h (safe_strerror): Remove prototype; move to common/common-utils.h. gdb/gdbserver/ChangeLog 2015-01-15 Sergio Durigan Junior <sergiodj@redhat.com> * Makefile.in (posix-strerror.o): New rule. (mingw-strerror.o): Likewise. * configure: Regenerated. * configure.ac: Source file ../common/common.host. Initialize new variable srv_host_obs. Add srv_host_obs to GDBSERVER_DEPFILES.	12 years ago
H.J. Lu	6333bc0dd6	Don't complain about -fPIC for undefined symbol When building executable, undefined symbol is a fatal error. We don't complain about -fPIC if the symbol is undefined. bfd/ PR ld/17847 * elf64-x86-64.c (elf_x86_64_relocate_section): Don't complain about -fPIC if the symbol is undefined when building executable. ld/testsuite/ PR ld/17847 * ld-x86-64/pie1.d: New file. * ld-x86-64/pie1.s: Likwise. * ld-x86-64/x86-64.exp: Run pie1.	12 years ago
Don Breazeal	d221e7efd6	Skip two more attach tests when testing against stub-like targets This patch updates two attach tests to use utility procs for checking if the attach test should run and for launching the program to be attached, as follows: 1) Use can_spawn_for_attach instead of is_remote target 2) Use spawn_wait_for_attach instead of exec/sleep Tested (1) with i686-mingw32 host and i686-pc-linux-gnu build/target and both with x86_64 Ubuntu. gdb/testsuite/ChangeLog: * gdb.base/attach-pie-noexec.exp: Use can_spawn_for_attach instead of checking whether the target board is remote and use spawn_wait_for_attach instead of exec/sleep. * gdb.base/attach-twice.exp: Likewise.	12 years ago
Nick Clifton	cd21f5daad	Fix memory access violations triggered by running objdump on fuzzed binaries. PR binutils/17512 * elf-m10300.c (mn10300_info_to_howto): Replace assertion with an error message. Never return an invalid howto pointer. * elf32-cr16.c (cr16_info_to_howto): Likewise. * elf32-crx.c (elf_crx_info_to_howto): Likewise. * elf32-i370.c (i370_elf_info_to_howto): Likewise. * elf32-mcore.c (mcore_elf_info_to_howto): Likewise. * elf32-microblaze.c (microblaze_elf_info_to_howto): Likewise. * elf32-mips.c (mips_elf32_rtype_to_howto): Likewise. * elf32-pj.c (pj_elf_info_to_howto): Likewise. * elf32-ppc.c (ppc_elf_info_to_howto): Likewise. * elf32-spu.c (spu_elf_info_to_howto): Likewise. * elf32-v850.c (v850_elf_info_to_howto_rela): Likewise. * elf32-vax.c (rtype_to_howto): Likewise. * elf64-alpha.c (elf64_alpha_info_to_howto): Likewise. * elf64-mips.c (mips_elf64_rtype_to_howto): Likewise. * elfn32-mips.c (sh_elf_info_to_howto): Likewise. * elf32-sh.c (sh_elf_info_to_howto): Likewise. (sh_elf_reloc): Check that the reloc is in range. * reloc.c (bfd_perform_relocation): Check that the section is big enough for the entire reloc. (bfd_generic_get_relocated_section_contents): Report unexpected return values from perform_reloc.	12 years ago
Nick Clifton	2d071cfc66	Fixes a bug in the relaxation of R_MSP430X_ABS16 to R_MSP430_10_PCREL. * elf32-msp430.c (msp430_elf_relax_section): Skip unhandled relocs. Include PC-relative adjustment for R_MSP430X_ABS16 relaxation.	12 years ago
Alan Modra	ca55926c2f	Omit section dynsyms for any linker created section This is a simplification, and fixes a testcase I had where an empty powerpc64 .branch_lt section was chosen for the data_index_section dynamic symbol and thus wasn't removed. * elflink.c (_bfd_elf_link_omit_section_dynsym): Return true for any output section matching a linker created dynobj section.	12 years ago
Joel Brobecker	3af8af43f7	Document the GDB 7.8.2 release in gdb/ChangeLog gdb/ChangeLog: GDB 7.8.2 released.	12 years ago
Alan Modra	8539e4e89e	Fix ARM fail of gap test ld-elf/gap test was failing due to the ARM backend attempting to output arch symbols when ld -s (strip all symbols) is in force. This patch stops that happening and tidies the code a little. PR 17842 * elflink.c (elf_link_output_sym): Assert elf_onesymtab set. (bfd_elf_final_link): Always create a symbol table when emit_relocs. Don't assign symtab file position unless symbols will be output. Merge blocks with condition in common. Don't call elf_backend_output_arch_local_syms or elf_backend_output_arch_syms unless other symbols are output. Move assignment of symtab_shndx file position. Localize variable.	12 years ago
Joel Brobecker	bafffb51c4	[Ada] 'first/'last/'length of array whose bound is a discriminant Consider the following code: type Table is array (Positive range <>) of Integer; type Object (N : Integer) is record Data : Table (1 .. N); end record; My_Object : Object := (N => 3, Data => (3, 5, 8)); Trying to print the range and length of the My_Object.Data array yields: (gdb) print my_object.data'first $1 = 1 (gdb) print my_object.data'last $2 = 0 (gdb) print my_object.data'length $3 = 0 The first one is correct, and that is thanks to the fact that the lower bound is statically known. However, for the upper bound, and consequently the array's length, the values are incorrect. It should be: (gdb) print my_object.data'last $2 = 3 (gdb) print my_object.data'length $3 = 3 What happens here is that ada_array_bound_from_type sees that our array has a parallel "___XA" type, and therefore tries to use it. In particular, it described our array's index type as: [...]___XDLU_1__n, which means lower bound = 1, and upper bound is value of "n". Unfortunately, ada_array_bound_from_type does not have access to the discriminant, and is therefore unable to compute the bound correctly. Fortunately, at this stage, the bound has already been computed a while ago, and therefore doesn't need to be re-computed here. This patch fixes the issue by ignoring that ___XA type if the array is marked as already fixed. This also fixes the same issue with packed arrays. gdb/ChangeLog: * ada-lang.c (ada_array_bound_from_type): Ignore array's parallel ___XA type if the array has already been fixed. gdb/testsuite/ChangeLog: * gdb.ada/var_arr_attrs: New testcase.	12 years ago
Joel Brobecker	a300380e12	Build failure in sim/rx/gdb-if.c on windows This should fix a build failure reported on x86_64-mingw32 by Daniel Calcoen due to conflicting declarations of "open". This patch just renames the static global in sim/rx/gdb-if.c into "rx_sim_is_open". sim/rx/ChangeLog: * gdb-if.c (open): Rename to... (rx_sim_is_open): This. Replace all uses of "open" by uses of "rx_sim_is_open" throughout. Tested by rebuilding on x86_64-linux.	12 years ago
Anthony Green	10b8fe5e0e	Don't disable gprof for moxie	12 years ago
GDB Administrator	c360943165	Automatic date update in version.in	12 years ago
Jan-Benedict Glaw	edabaaee81	Merge include/libiberty.h from GCC This pulls in some missing prototypes and also adds corresponding entries to the ChangeLog file. Please note that for one function, strverscmp(), the ChangeLog entry was already there, but the actual prototype wasn't. These ChangeLog entries are added: 2014-10-28 Yury Gribov <y.gribov@samsung.com> * libiberty.h (strtol, strtoul, strtoll, strtoull): New prototypes. 2014-10-15 David Malcolm <dmalcolm@redhat.com> * libiberty.h (choose_tmpdir): New prototype.	12 years ago
Jiong Wang	52db4ec2d1	[ARM] Reject R_ARM_REL32 when trying to defer it to runtime bfd/ * elf32-arm.c (elf32_arm_final_link_relocate): Reject R_ARM_32/_NOI when trying to defer them to runtime. ld/testsuite/ * ld-arm/elf32-reject.s: New testcase. * ld-arm/elf32-reject.d: Likewise. * ld-arm/elf32-reject-pie.s: Likewise. * ld-arm/elf32-reject-pie.d: Likewise. * ld-arm/arm-elf.exp: Run new testcases. * ld-arm/ifunc-7.s: Delete f2/f4 test items. * ld-arm/ifunc-7.rd: Likewise. * ld-arm/ifunc-7.gd: Likewise. * ld-arm/ifunc-7.dd: Likewise. * ld-arm/ifunc-8.s: Likewise. * ld-arm/ifunc-8.rd: Likewise. * ld-arm/ifunc-8.gd: Likewise. * ld-arm/ifunc-8.dd: Likewise.	12 years ago
Cary Coutant	3d0064a95d	Fix a bug in resolving HI16/LO16 relocation pairs for MIPS. 2015-01-14 Sasa Stankovic <Sasa.Stankovic@imgtec.com> gold/ * mips.cc (reloc_high): Add r_sym. (Mips_relocate_functions::relhi16): Add r_sym parameter. Pass r_sym to reloc_high constructor. (Mips_relocate_functions::relgot16_local): Likewise. (Mips_relocate_functions::rello16): Add r_sym parameter. Use r_sym and r_type to decide whether LO16 matches HI16. (Target_mips::Relocate::relocate): Pass r_sym to calls to relhi16, rello16 and relgot16_local.	12 years ago
Yao Qi	cdf436294f	Detect 64-bit-ness in PowerPC Book III-E This patch is to teach both GDB and GDBServer to detect 64-bit inferior correctly. We find a problem that GDBServer is unable to detect on a e5500 core processor. Current GDBServer assumes that MSR is a 64-bit register, but MSR is a 32-bit register in Book III-E. This patch is to fix this problem by checking the right bit in MSR, in order to handle both Book III-S and Book III-E. In order to detect Book III-S and Book III-E, we check the PPC_FEATURE_BOOKE from the host's HWCAP (by getauxval on glibc >= 2.16. If getauxval doesn't exist, we implement the fallback by parsing /proc/self/auxv), because it should an invariant on the same machine cross different processes. In order to share code, I add nat/ppc-linux.c for both GDB and GDBserver side. gdb: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (ppc-linux.o): New rule. * config/powerpc/ppc64-linux.mh (NATDEPFILES): Add ppc-linux.o. * configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * nat/ppc-linux.h [__powerpc64__] (ppc64_64bit_inferior_p): Declare. * nat/ppc-linux.c: New file. * ppc-linux-nat.c (ppc_linux_target_wordsize) [__powerpc64__]: Call ppc64_64bit_inferior_p. gdb/gdbserver: 2015-01-14 Yao Qi <yao@codesourcery.com> * Makefile.in (SFILES): Add nat/ppc-linux.c. (ppc-linux.o): New rule. * configure.srv (powerpc--linux): Add ppc-linux.o. configure.ac: AC_CHECK_FUNCS(getauxval). * config.in: Re-generated. * configure: Re-generated. * linux-ppc-low.c (ppc_arch_setup) [__powerpc64__]: Call ppc64_64bit_inferior_p	12 years ago
Yao Qi	514c533895	Move some ppc macros to nat/ppc-linux.h When I use PPC_FEATURE_BOOKE in GDBserver, I find it is defined in GDB but not in GDBserver. After taking a further look, I find some macros are duplicated between ppc-linux-nat.c and linux-ppc-low.c, so this patch is to move them into nat/ppc-linux.h. gdb/gdbserver: 2015-01-14 Yao Qi <yao@codesourcery.com> * linux-ppc-low.c: Include "nat/ppc-linux.h". (PPC_FEATURE_HAS_VSX): Move to nat/ppc-linux.h. (PPC_FEATURE_HAS_ALTIVEC, PPC_FEATURE_HAS_SPE): Likewise. (PT_ORIG_R3, PT_TRAP): Likewise. (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise. (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise. (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise. gdb: 2015-01-14 Yao Qi <yao@codesourcery.com> * ppc-linux-nat.c (PT_ORIG_R3, PT_TRAP): Move to nat/ppc-linux.h. (PPC_FEATURE_CELL, PPC_FEATURE_BOOKE): Likewise. (PPC_FEATURE_HAS_DFP): Likewise. (PTRACE_GETVRREGS, PTRACE_SETVRREGS): Likewise. (PTRACE_GETVSXREGS, PTRACE_SETVSXREGS): Likewise. (PTRACE_GETEVRREGS, PTRACE_SETEVRREGS): Likewise. Include "nat/ppc-linux.h". * nat/ppc-linux.h: New file. * Makefile.in (HFILES_NO_SRCDIR): Add nat/ppc-linux.h.	12 years ago
Pedro Alves	5589af0e66	PR17525 - breakpoint commands not executed when program run from -x script Executing a gdb script that runs the inferior (from the command line with -x), and has it hit breakpoints with breakpoint commands that themselves run the target, is currently broken on async targets (Linux, remote). While we're executing a command list or a script, we force the interpreter to be sync, which results in some functions nesting an event loop and waiting for the target to stop, instead of returning immediately and having the top level event loop handle the stop. The issue with this bug is simply that bpstat_do_actions misses checking whether the interpreter is sync. When we get here, in the case of executing a script (or, when the interpreter is sync), the program has already advanced to the next breakpoint, through maybe_wait_sync_command_done. We need to process its breakpoints immediately, just like with a sync target. Tested on x86_64 Fedora 20. gdb/ 2015-01-14 Pedro Alves <palves@redhat.com> PR gdb/17525 * breakpoint.c: Include "interps.h". (bpstat_do_actions_1): Also check whether the interpreter is async. gdb/testsuite/ 2015-01-14 Pedro Alves <palves@redhat.com> Joel Brobecker <brobecker@adacore.com> PR gdb/17525 * gdb.base/bp-cmds-execution-x-script.c: New file. * gdb.base/bp-cmds-execution-x-script.exp: New file. * gdb.base/bp-cmds-execution-x-script.gdb: New file.	12 years ago

1 2 3 4 5 ...

82455 Commits (43d66c95c826441c64bacfa07095535ddea57a51) All Branches Search

82455 Commits (43d66c95c826441c64bacfa07095535ddea57a51)

All Branches