QNX provides some .note subsections. QNT_STACK is the one controling
the stack allocation.
bfd/ChangeLog:
* elf.c (BFD_QNT_CORE_INFO): Delete.
(BFD_QNT_CORE_STATUS): Likewise.
(BFD_QNT_CORE_GREG): Likewise.
(BFD_QNT_CORE_FPREG): Likewise.
(elfcore_grok_nto_note): Replace BFD_QNT_* by QNT_*.
binutils/ChangeLog:
* readelf.c (get_qnx_elfcore_note_type): New function.
(print_qnx_note): New function.
(process_note): Add support for QNX support.
include/ChangeLog:
* elf/common.h (QNT_DEBUG_FULLPATH): New define.
(QNT_DEBUG_RELOC): New define.
(QNT_STACK): New define.
(QNT_GENERATOR): New define.
(QNT_DEFAULT_LIB): New define.
(QNT_CORE_SYSINFO): New define.
(QNT_CORE_INFO): New define.
(QNT_CORE_STATUS): New define.
(QNT_CORE_GREG): New define.
(QNT_CORE_FPREG): New define.
(QNT_LINK_MAP): New define.
This memcpy segfaults if symcount is -1 (=> syms is NULL).
memcpy (sorted_syms, symcount ? syms : dynsyms,
sorted_symcount * sizeof (asymbol *));
* objdump.c (slurp_symtab): Don't leave symcount as -1 after
an error.
(slurp_dynamic_symtab): Likewise for dynsymcount.
objdump's read_section is never used for bss-style sections, so to
plug a hole that fuzzers have found, exclude sections without
SEC_HAS_CONTENTS.
* objdump.c (read_section): Report and return an error on
a no contents section.
Commit e3f450f393 resulted in a nm -l segfault on object files
without undefined symbols. Fix that, and be paranoid about bfd
section count changing.
* nm.c (struct lineno_cache): Add seccount.
(free_lineno_cache): Don't segfault on NULL lc->relocs.
(print_symbol): Stash section count when creating arrays.
* objdump.c (slurp_symtab): Replace bfd_fatal calls with calls
to my_bfd_nonfatal.
(slurp_dynamic_symtab, disassemble_section): Likewise.
(disassemble_data): Replace fatal call with non_fatal call, and
set exit_status. Don't error on non-existent dynamic relocs.
Don't call bfd_fatal on bfd_canonicalize_dynamic_reloc error.
(dump_ctf, dump_section_sframe): Replace bfd_fatal calls with
calls to my_bfd_nonfatal and clean up memory.
(dump_relocs_in_section): Don't call bfd_fatal on errors.
(dump_dynamic_relocs): Likewise.
(display_any_bfd): Make archive nesting too depp non_fatal.
Many of the fatal errors in nm ought to be recoverable. This patch
downgrades most of them. The ones that are left are most likely due
to memory allocation failures.
* nm.c (print_symdef_entry): Don't bomb with a fatal error
on a corrupted archive symbol table.
(filter_symbols): Silently omit symbols that return NULL
from bfd_minisymbol_to_symbol rather than giving a fatal
error.
(display_rel_file): Don't give a fatal error on
bfd_read_minisymbols returning an error, or on not being able
to read dynamic symbols for synth syms.
(display_archive): Downgrade bfd_openr_next_archived_file
error.
(display_file): Don't bomb on a bfd_close failure.
Replace the static variables used by nm to cache line number info
with a struct attached to the bfd. Cleaner, and it avoids any concern
that lineno_cache_bfd is somehow left pointing at memory for a closed
bfd and that memory is later reused for another bfd, not that I think
this is possible. Also don't bomb via bfd_fatal on errors getting
the line number info, just omit the line numbers.
* nm.c (struct lineno_cache): Rename from get_relocs_info.
Add symcount.
(lineno_cache_bfd, lineno_cache_rel_bfd): Delete.
(get_relocs): Adjust for struct rename. Don't call bfd_fatal
on errors.
(free_lineno_cache): New function.
(print_symbol): Use lineno_cache in place of statics. Don't
call bfd_fatal on errors reading symbols, just omit the line
info.
(display_archive, display_file): Call free_lineno_cache.
bfd_nonfatal is used when a bfd error is to be printed. That's not
the case for command line errors.
* objdump.c (nonfatal): Rename to my_bfd_nonfatal.
(main): Use non_fatal and call usage on unrecognized arg errors.
Don't set exit_status when calling usage.
There isn't really any good reason for code in rdcoff.c to distinguish
between "basic" types and any other type. This patch dispenses with
the array reserved for basic types and instead handles all types using
coff_get_slot, simplifying the code.
* rdcoff.c (struct coff_types, coff_slots): Merge. Delete
coff_slots.
(T_MAX): Delete.
(parse_coff_base_type): Use coff_get_slot to store baseic types.
(coff_get_slot, parse_coff_type, parse_coff_base_type),
(parse_coff_struct_type, parse_coff_enum_type),
(parse_coff_symbol, parse_coff): Pass types as coff_types**.
As for commit 72d225ef9c, handle type numbers starting anywhere.
PR 17512
* rdcoff.c (struct coff_slots): Add base_index.
(coff_get_slot): Delete pr17512 excessively large slot check.
Don't allocate entire array from 0 to type number, allocate a
sparse array.
On DOS systems, absolute paths start with the drive letter. This can
trigger failures in the regexp from dump tests, especially for those
checking for warnings or errors. They are usually skipping everything
before the first ":" as it has to be the file path.
| [^:]*: warning: ...
In order to avoid modifying many regexps to allow such drive letters,
prune them from all the outputs if they are found at the beginning of
a line.
binutils/ChangeLog:
* testsuite/lib/binutils-common.exp (prune_dump_output): New
(run_dump_test): Use it.
ld/ChangeLog:
* testsuite/ld-elf/noinit-sections-2.l: Remove DOS drive letter
handler.
Commit f9c36cc995 changed (and renamed) read_section_stabs with one
difference in overall behaviour. Previously read_section_stabs would
return a NULL for an empty section, which was then treated the same as
a missing section. Now an empty section is recognized and dumped.
This leads to NULL stabp and stabs_end in print_section_stabs. Since
stabs_end - STABSIZE is then a pointer to a very large address, the
test "stabp < stabs_end - STABSIZE" succeeds.
* objdump.c (print_section_stabs): Correct STABSIZE comparison.
Fix these fails:
alpha-dec-vms +FAIL: ld-scripts/asciz
alpha-dec-vms +FAIL: ld-scripts/ascii
i386-go32 +FAIL: ld-scripts/asciz
sh-coff +FAIL: ld-scripts/asciz
It's better to positively select targets for .section support than to
try to exclude all targets that don't. Make a new is_coff_format so
we can easily select such.
binutils/
* testsuite/lib/binutils-common.exp (is_coff_format): New.
ld/
* testsuite/ld-scripts/ascii.d: Use is_elf_format and
is_coff_format to select targets, exclude ti coff.
* testsuite/ld-scripts/asciz.d: Likewise. Accept trailing zeros.
I don't see much point in cluttering the source with the PROGRESS
macros, which of course do nothing at all with the definitions in
progress.h. progress.h is unchanged apart from the copyright comment
since commit d4d4c53c68 in 1994.
binutils/
* ar.c: Don't include progress.h, or invoke PROGRESS macros.
* nm.c: Likewise.
* objcopy.c: Likewise.
* objdump.c: Likewise.
gas/
* as.h: Don't include progress.h.
* as.c: Don't invoke PROGRESS macros.
* write.c: Likewise.
include/
* progress.h: Delete.
ld/
* ldmain.c: Don't include progress.h, or invoke PROGRESS macros.
This function is used to read sections other than stabs, and there is
now another version of it that extracts different info from the bfd
section. Rename it and return the bfd section instead of assorted
fields of the bfd section.
* objcopy.c (read_section): Renamed from read_section_stabs.
Delete size_ptr and entsize_ptr params, add contents param.
Return asection pointer. Don't unnecessarily free contents on
failure from bfd_malloc_and_get_section.
(find_stabs_section): Use read_section.
(dump_ctf, dump_section_sframe): Likewise.
(read_section_sframe): Delete.
Fuzzers have found that specifying a large stab type number results in
lots of memory being requested, as the list is extended with a 16
element array at a time until we reach the given stab type. It also
takes a long time. Of course normal sane stab types use small
positive integers, but it's not hard to modify the code to handle type
numbers starting anyhere.
* stabs.c (struct stab_types): Add base_index.
(stab_find_slot): Simplify filenum check. Delete type number
check. Don't allocate entire array from 0 to type number,
allocate a sparse array.
Before commit:
commit 2438b771ee
Date: Wed Nov 2 15:53:43 2022 +0000
opcodes/mips: use .word/.short for undefined instructions
unknown 32-bit microMIPS instructions were disassembled as a raw
32-bit number with no '.word' directive. The above commit changed
this and added a '.word' directive before the 32-bit number.
It was pointed out on the mailing list, that for microMIPS it would be
better to display such 32-bit instructions using a '.short' directive
followed by two 16-bit values.
This commit updates the mips disassembler to do this, and adds a new
test that validates this output.
This fixes some objcopy memory leaks. commit 450da4bd38 used
xatexit to tidy most of the hash table memory, but of course that's
ineffective without a call to xexit. The other major memory leak
happens if there is an error of some sort writing the output file, due
to not closing the input file and thus not freeing memory attached to
the bfd.
* objcopy.c (copy_file): Don't return when bfd_close of output
gives an error, always bfd_close input too.
(main): Call xexit.
There is some inconsistency between the behaviour of objdump -D and
objdump -s, both supposedly operating on all sections by default.
objdump -s ignores bss sections, while objdump -D dissassembles the
zeros. Fix this by making objdump -D ignore bss sections too.
Furthermore, "objdump -s -j .bss" doesn't dump .bss as it should,
since the user is specifically asking to look at all those zeros.
This change does find some tests that used objdump -D with expected
output in bss-style sections. I've updated all the msp430 tests that
just wanted to find a non-empty section to look at section headers
instead, making the tests slightly more stringent. The ppc xcoff and
spu tests are fixed by adding -j options to objdump, which makes the
tests somewhat more lenient.
binutils/
* objdump.c (disassemble_section): Ignore sections without
contents, unless overridden by -j.
(dump_section): Allow -j to override the default of not
displaying sections without contents.
* doc/binutils.texi (objdump options): Update -D, -s and -j
description.
gas/
* testsuite/gas/ppc/xcoff-tls-32.d: Select wanted objdump
sections with -j.
* testsuite/gas/ppc/xcoff-tls-64.d: Likewise.
ld/
* testsuite/ld-msp430-elf/main-bss-lower.d,
* testsuite/ld-msp430-elf/main-bss-upper.d,
* testsuite/ld-msp430-elf/main-const-lower.d,
* testsuite/ld-msp430-elf/main-const-upper.d,
* testsuite/ld-msp430-elf/main-text-lower.d,
* testsuite/ld-msp430-elf/main-text-upper.d,
* testsuite/ld-msp430-elf/main-var-lower.d,
* testsuite/ld-msp430-elf/main-var-upper.d: Expect -wh output.
* testsuite/ld-msp430-elf/msp430-elf.exp: Use objdump -wh
rather than objdump -D or objdump -d with tests checking for
non-empty given sections.
* testsuite/ld-spu/ear.d,
* testsuite/ld-spu/icache1.d,
* testsuite/ld-spu/ovl.d,
* testsuite/ld-spu/ovl2.d: Select wanted objdump sections.
I've found that I often use dwarf-mode with relatively small test
files. In this situation, it's handy to be able to expand all the
DWARF, rather than moving to each "..." separately and using C-u C-m.
This patch implements this feature. It also makes a couple of other
minor changes:
* I removed a stale FIXME from dwarf-mode. In practice I find I often
use "g" to restore the buffer to a pristine state; checking the file
mtime would work against this.
* I tightened the regexp in dwarf-insert-substructure. This prevents
the C-m binding from trying to re-read a DIE which has already been
expanded.
* Finally, I've bumped the dwarf-mode version number so that this
version can easily be installed using package.el.
2023-02-09 Tom Tromey <tromey@adacore.com>
* dwarf-mode.el: Bump version to 1.8.
(dwarf-insert-substructure): Tighten regexp.
(dwarf-refresh-all): New defun.
(dwarf-mode-map): Bind "A" to dwarf-refresh-all.
(dwarf-mode): Remove old FIXME.
If file size is calculated by bfd_get_file_size, as it is by
_bfd_alloc_and_read calls in coff_object_p, then it is cached and when
pe_ILF_build_a_bfd converts an archive entry over to BFD_IN_MEMORY,
the file size is no longer valid. Found when attempting objdump -t on
a very small (27 bytes) ILF file and hitting the pr24707 fix (commit
781152ec18). So, clear file size when setting BFD_IN_MEMORY on bfds
that may have been read. (It's not necessary in writable bfds,
because caching is ignored by bfd_get_size when bfd_write_p.)
I also think the PR 24707 fix is no longer neeeded. All of the
testcases in that PR and in PR24712 are caught earlier by file size
checks when reading the symbols from file. So I'm reverting that fix,
which just compared the size of an array of symbol pointers against
file size. That's only valid if on-disk symbols are larger than a
host pointer, so the test is better done in format-specific code.
bfd/
* coff-alpha.c (alpha_ecoff_get_elt_at_filepos): Clear cached
file size when making a BFD_IN_MEMORY bfd.
* opncls.c (bfd_make_readable): Likewise.
* peicode.h (pe_ILF_build_a_bfd): Likewise.
binutils/
PR 24707
* objdump.c (slurp_symtab): Revert PR24707 fix. Tidy.
(slurp_dynamic_symtab): Tidy.
Insn width granularity being 16 bits, producing byte granular output
isn't very useful. With there being a way to specific otherwise
unknown insns to the assembler, use that same representation (to be
precise: its <length>,<encoding> flavor) for disassembly.
After bfd_close nothing should access bfd memory. Now that bfd_close
always tidies up even after an error, attempting to tidy the cached
bfd list by calling bfd_cache_close is wrong and not needed.
PR 30060
* ar.c (remove_output): Don't call bfd_cache_close.
(output_bfd): Delete.
* arsup.c (ar_end): Call bfd_close_all_done, not bfd_cache_close.
This adjusts the testsuite to get rid of a number of XPASSes that have
appeared. Someone might like to look into a better patch for the s390
change.
aarch64-pe XPASS: weak symbols
arm-nacl XPASS: rgn-over8
mcore-pe XPASS: ld-scripts/provide-8
mips64-linux-gnuabi64 XPASS: vers4
mips64-linux-gnuabi64 XPASS: vers4b
mips-linux-gnu XPASS: vers4
mips-linux-gnu XPASS: vers4b
s390-linux-gnu XPASS: undefined line
sh4-linux-gnu XPASS: --gc-sections with __start_SECTIONNAME
sh-coff XPASS: objcopy object (simple copy)
sh-coff XPASS: objcopy executable (pr25662)
binutils/
* testsuite/binutils-all/objcopy.exp: Don't xfail "simple
copy" and "pr25662" on sh-*-coff. Remove all non-ELF xfails
on "ELF unknown section type" test.
ld/
* testsuite/ld-elfvers/vers.exp (vers4, vers4b): Don't xfail
all mips, just xfail mips irix.
* testsuite/ld-gc/pr19161.d: Don't xfail sh.
* testsuite/ld-scripts/rgn-over8-ok.d: Don't xfail nacl.
* testsuite/ld-scripts/weak.exp: Don't xfail aarch64-pe.
* testsuite/ld-undefined/undefined.exp: Conditionally xfail
"undefined line" depending on gcc version for s390.
If objdump is used with both --disassemble=symbol and --reloc options
skip relocations that have addresses before the symbol, so that they
are not displayed.
This adds a mingw target for aarch64, including windres and dlltool.
Note that the old value of jmp_aarch64_bytes was wrong, and this does
the same thing as MSVC does.
The bfd_coff_backend_data struct should be read-only, the only thing
preventing this is that objcopy writes to one of the fields,
_bfd_coff_long_section_names. This patch creates a copy of the field
in bfd coff_obj_tdata, which makes more sense anyway. When enabling
long section names the intent is to do so for a particular bfd, not
for all bfds that might happen to be using the target xvec.
bfd/
* coffcode.h: Update coff long section name comment.
(bfd_coff_set_long_section_names_allowed): Use macro accessor
to set flag.
(bfd_coff_set_long_section_names_disallowed): Tidy.
(coff_backend_info): Return a const pointer.
(bfd_coff_std_swap_table, ticoff0_swap_table, ticoff1_swap_table),
(bigobj_swap_table): Make const.
(bfd_coff_long_section_names): Use tdata copy.
(coff_mkobject): Set long_section_names from coff_backend_info.
* coff-go32.c (_bfd_go32_mkobject): Likewise.
* peicode.h (pe_mkobject): Likewise.
* coff-sh.c (bfd_coff_small_swap_table): Make const.
* libcoff-in.h (struct coff_tdata): Add long_section_names,
reorder fields.
* libcoff.h: Regenerate.
binutils/
* objcopy.c (set_long_section_mode): Move earlier in file.
(copy_object): Call set_long_section_mode here, after setting
output format.
(copy_file): Don't call set_long_section_mode.
This occurs when attempting to read back a section from the output
file in _bfd_XX_bfd_copy_private_bfd_data_common. The copy of the
section failed size sanity checking, thus it won't be written.
* objcopy.c (copy_object): Return false if copy_section or
copy_relocations_in_section fails.
Alan Modra
Clément Chigot
Nick Clifton
Andrew Burgess
Tom Tromey
Jan Beulich
Vladislav Khmelevsky
Indu Bhagat
Mark Harmstone