binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Alan Modra	c2795844e6	ChangeLog rotation	5 years ago
H.J. Lu	279d901e5a	x86-64: Add Intel LAM property support Add Intel Linear Address Masking (LAM) property support. LAM modifies the checking that is applied to 64-bit linear addresses, allowing software to use of the untranslated address bits for metadata. bfd/ * elf-linker-x86.h (elf_x86_cet_report): Renamed to ... (elf_x86_prop_report): This. (elf_linker_x86_params): Add lam_u48, lam_u57, lam_u48_report and lam_u57_report. * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Support GNU_PROPERTY_X86_FEATURE_1_LAM_U48 and GNU_PROPERTY_X86_FEATURE_1_LAM_U57. (_bfd_x86_elf_link_fixup_gnu_properties): Keep LAM features only for 64-bit output. binutils/ * NEWS: Mention LAM_U48 and LAM_U57 support. * elfedit.c (elf_x86_feature): Support lam_u48 and lam_u57. (usage): Add lam_u48 and lam_u57. * readelf.c (decode_x86_feature_1): Support LAM_U48 and LAM_U57. * doc/binutils.texi: Update elfedit with lam_u48 and lam_u57 support. * testsuite/binutils-all/x86-64/lam-u48.d: New file. * testsuite/binutils-all/x86-64/lam-u48.s: Likewise. * testsuite/binutils-all/x86-64/lam-u57.d: Likewise. * testsuite/binutils-all/x86-64/lam-u57.s: Likewise. include/ * elf/common.h (GNU_PROPERTY_X86_FEATURE_1_LAM_U48): New. (GNU_PROPERTY_X86_FEATURE_1_LAM_U57): Likewise. ld/ * NEWS: Mention LAM_U48 and LAM_U57 support. * ld.texi: Document LAM_U48 and LAM_U57 support. * emulparams/cet.sh: Updated. * emulparams/elf_x86_64.sh: Source x86-64-lam.sh. * emulparams/x86-64-lam.sh: New file. * testsuite/ld-x86-64/property-x86-lam-u48-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u48.s: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-1b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-2.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3a.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-3b.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-4.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57-5.d: Likewise. * testsuite/ld-x86-64/property-x86-lam-u57.s: Likewise. * testsuite/ld-x86-64/x86-64.exp: Run LAM tests.	5 years ago
Alan Modra	3fafa2e26e	Assorted tidies bfd/ * elf32-microblaze.c (dbg): Delete unused variable. * elf32-nds32.c (relax_group_section_id_list): Make static. * som.c (reloc_queue): Make static. * xtensa-isa.c (xtisa_errno, xtisa_error_msg): Make static. include/ * xtensa-isa-internal.h (xtisa_errno, xtisa_error_msg): Delete.	5 years ago
Alan Modra	bd38246a45	Constify more arrays bfd/ * coff-z80.c (bfd_howto_type): Make typedef const. * elf32-z80.c (bfd_howto_type): Likewise. * elf32-m32c.c (EncodingTable): Likewise. * elf32-csky.c (csky_arch_for_merge): Likewise. (csky_archs): Use typedef. * elf32-m68hc11.c (m68hc11_direct_relax_table): Make const. (find_relaxable_insn, m68hc11_elf_relax_section): Adjust to suit. * elf32-ppc.c (ppc_alt_plt): Make const. * elf32-rl78.c (relax_addr16): Likewise. * targets.c (_bfd_associated_vector): Likewise. (bfd_target_vector, bfd_associated_vector): Likewise. * libbfd-in.h (bfd_target_vector, bfd_associated_vector): Likewise. * libbfd.h: Regenerate. include/ * opcode/arc-attrs.h (CONFLICT_LIST): Make const.	5 years ago
Alan Modra	c410035d37	constify elfNN_bed elfNN_bed was made writable as an expedient means of communicating ld -z max-page-size and ld -z common-page-size values to BFD linker code, and even for objcopy to communicate segment alignment between copy_private_bfd_data, rewrite_elf_program_header and assign_file_positions_for_load_sections. Some time later elfNN_bed elf_osabi was written by gas. It turns out none of these modifications to elfNN_bed was necessary, so make it const again. include/ * bfdlink.h (struct bfd_link_info): Add maxpagesize and commonpagesize. bfd/ * elfxx-target.h (elfNN_bed): Constify. * bfd.c (bfd_elf_set_pagesize): Delete. (bfd_emul_set_maxpagesize, bfd_emul_set_commonpagesize): Delete. * elf.c (get_program_header_size): Get commonpagesize from link info. (_bfd_elf_map_sections_to_segments): Get maxpagesize from link info. (assign_file_positions_for_load_sections): Likewise. (assign_file_positions_for_non_load_sections): Likewise. (rewrite_elf_program_header): Add maxpagesize param. Set map_p_align. (copy_private_bfd_data): Don't call bfd_elf_set_maxpagesize. Instead pass maxpagesize to rewrite_elf_program_header. * elf32-nds32.c (relax_range_measurement): Add link_info param. Get maxpagesize from link_info. Adjust caller. * bfd-in2.h: Regenerate. gas/ * config/obj-elf.c (obj_elf_section): Don't set elf_osabi here. (obj_elf_type): Likewise. ld/ * ld.h (ld_config_type): Delete maxpagesize and commonpagesize. * emultempl/elf.em: Use link_info rather than config for maxpagesize and commonpagesize. * emultempl/ppc32elf.em: Likewise. * ldexp.c (fold_binary, fold_name): Likewise. * ldemul.c (after_parse_default): Likewise. (set_output_arch_default): Don't call bfd_emul_set_maxpagesize or bfd_emul_set_commonpagesize.	5 years ago
Alan Modra	61d2295d72	xtensa constify Move lots of read-only arrays to .rodata. include/ * xtensa-isa-internal.h (xtensa_format_internal), (xtensa_slot_internal, xtensa_operand_internal), (xtensa_arg_internal, xtensa_iclass_internal), (xtensa_opcode_internal, xtensa_regfile_internal), (xtensa_interface_internal, xtensa_funcUnit_internal), (xtensa_state_internal, xtensa_sysreg_internal): Constify. bfd/ * elf32-xtensa.c (narrowable, widenable): Constify. * xtensa-modules.c: Constify many arrays.	5 years ago
Vivek Das Mohapatra	6a0a0dd0cc	Handle -z unique/-z nounique in ld Add (or suppress) a DT_GNU_FLAGS_1 dynamic section with a bit flag value of DF_GNU_1_UNIQUE. bfd/ * elflink.c (bfd_elf_size_dynamic_sections): Call _bfd_elf_add_dynamic_entry to add a DT_GNU_FLAGS_1 section. include/ * bfdlink.h (struct bfd_link_info): New field gnu_flags_1. ld/ * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Parse -z unique / -z nounique options.	5 years ago
Vivek Das Mohapatra	ee0688c233	Define a new DT_GNU_FLAGS_1 dynamic section for ld, readelf et al DT_GNU_FLAGS_1 added to the DT_VALRNGLO-DT_VALRNGHI range. DT_GNU_FLAGS_1 value DF_GNU_1_UNIQUE added. * elf/common.h (DT_GNU_FLAGS_1, DF_GNU_1_UNIQUE): Define.	5 years ago
Cary Coutant	4cf2ad7200	Update ELF headers and readelf with recent e_machine assignments. binutils/ * readelf.c (get_machine_name): Update list of e_machine values. include/ * elf/common.h: Update list of e_machine values.	5 years ago
Nelson Chu	c2137f55ad	RISC-V: Add sext.[bh] and zext.[bhw] pseudo instructions. https://github.com/riscv/riscv-asm-manual/pull/61 We aleady have sext.w, so just add sext.b, sext.h, zext.b, zext.h and zext.w. In a certain sense, zext.b is not a pseudo - It is an alias of andi. Similarly, sext.b and sext.h are aliases of other rvb instructions, when we enable b extension; But they are pseudos when we just enable rvi. However, this patch does not consider the rvb cases. Besides, zext.w is only valid in rv64. gas/ * config/tc-riscv.c (riscv_ext): New function. Use md_assemblef to expand the zext and sext pseudos, to give them a chance to be expanded into c-ext instructions. (macro): Handle M_ZEXTH, M_ZEXTW, M_SEXTB and M_SEXTH. * testsuite/gas/riscv/ext.s: New testcase. * testsuite/gas/riscv/ext-32.d: Likewise. * testsuite/gas/riscv/ext-64.d: Likewise. include/ * opcode/riscv.h (M_ZEXTH, M_ZEXTW, M_SEXTB, M_SEXTH.): Added. opcodes/ * riscv-opc.c (riscv_opcodes): Add sext.[bh] and zext.[bhw].	5 years ago
Nelson Chu	729a53530e	RISC-V: Control fence.i and csr instructions by zifencei and zicsr. bfd/ * elfxx-riscv.c (riscv_ext_dont_care_version): New function. Return TRUE if we don't care the versions of the extensions. These extensions are added to the subset list for special purposes, with the explicit versions or the RISCV_UNKNOWN_VERSION versions. (riscv_parse_add_subset): If we do care the versions of the extension, and the versions are unknown, then report errors for the non-implicit extensions, and return directly for the implicit one. (riscv_arch_str1): Do not output i extension after e, and the extensions which versions are unknown. gas/ * config/tc-riscv.c (riscv_multi_subset_supports): Handle INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI. * testsuite/gas/riscv/march-imply-i.s: New testcase. * testsuite/gas/riscv/march-imply-i2p0-01.d: New testcase. The version of i is less than 2.1, and zi* are supported in the chosen spec, so enable the fence.i and csr instructions, also output the implicit zi* to the arch string. * testsuite/gas/riscv/march-imply-i2p0-02.d: Likewise, but the zi* are not supported in the spec 2.2. Enable the related instructions since i's version is less than 2.1, but do not output them. * testsuite/gas/riscv/march-imply-i2p1-01.d: New testcase. The version of i is 2.1, so don't add it's implicit zi, and disable the related instructions. testsuite/gas/riscv/march-imply-i2p1-01.l: Likewise. * testsuite/gas/riscv/march-imply-i2p1-02.d: Likewise, and set the zi* explicitly, so enable the related instructions. * testsuite/gas/riscv/march-imply-i2p0.d: Removed. * testsuite/gas/riscv/march-imply-i2p1.d: Removed. include/ * opcode/riscv.h: Add INSN_CLASS_ZICSR and INSN_CLASS_ZIFENCEI. opcodes/ * riscv-opc.c (riscv_opcodes): Control fence.i and csr instructions by zifencei and zicsr.	5 years ago
Nick Clifton	846141822b	Remove references to the unofficial SHF_GNU_BUILD_NOTE section flag. binutils * objcopy.c (is_mergeable_note_section): Remove reference to SHF_GNU_BUILD_NOTE. include * elf/common.h (SHF_GNU_BUILD_NOTE): Delete.	5 years ago
Nelson Chu	00d4d1b0a3	RISC-V: Support to add implicit extensions for G. G is a special case, consider the ISA spec github issue as follows, https://github.com/riscv/riscv-isa-manual/issues/575 My understand is that - i, m, a, f and d extensions are not g's implicit extensions, they are g's expansions. The zifencei is the implicit extension of g, and so is zicsr, since it is implicited by f (or i2p1). However, we add the g with the RISCV_UNKNOWN_VERSION to the subset list, and it will not output to the arch string, it is only used to check what implicit extensions are need to be added. bfd/ * elfxx-riscv.c (riscv_parse_add_subset): Allow to add g with RISCV_UNKNOWN_VERSION versions. (riscv_parse_std_ext): Add g to the subset list, we only use it to add the implicit extensions, but won't output it to arch string. (riscv_parse_add_implicit_subsets): Add implicit zicsr and zifencei for g extension. (riscv_arch_str1): Do not output g to the arch string. * elfxx-riscv.h (RISCV_UNKNOWN_VERSION): Moved to include/opcode/riscv.h. gas/ * testsuite/gas/riscv/attribute-10.d: Updated. * testsuite/gas/riscv/march-imply-g.d: New testcase for g. * testsuite/gas/riscv/march-imply-unsupported.d: The zicsr and zifencei are not supported in the ISA spec v2.2, so don't add and output them. include/ * opcode/riscv.h (RISCV_UNKNOWN_VERSION): added.	5 years ago
Nelson Chu	7ef19aa616	RISC-V: Improve the version parsing for arch string. Keep the riscv_add_subset to do the same thing, and use a new function, riscv_parse_add_subset, to cover most of the things when parsing, including find the default versions for extensions, and check whether the versions are valid. The version 0p0 should be an invalid version, that is the mistake I made before. This patch clarify the version rules as follows, * We accept any version of extensions set by users, except 0p0. * The non-standard x extensions must be set with versions in arch string. * If user don't set the versions, or set 0p0 for the extensions, then try to find the supported versions according to the chosen ISA spec. Otherwise, report errors rather than output 0p0 for them. Besides, we use as_bad rather than as_fatal to report more errors for assembler. bfd/ * elfxx-riscv.c (riscv_lookup_subset): Moved to front. (riscv_add_subset): Likewise. (riscv_release_subset_list): Likewise. (riscv_parse_add_subset): New function. Find and check the versions before adding them by riscv_add_subset. (riscv_parsing_subset_version): Remove use_default_version and change the version type from unsigned to int. Set the versions to RISCV_UNKNOWN_VERSION if we can not find them in the arch string. (riscv_parse_std_ext): Updated. (riscv_parse_prefixed_ext): Updated. Since we use as_bad rather than as_fatal to report more errors, return NULL string if the parsed end_of_version is NULL, too. (riscv_parse_subset): Use a new boolean, no_conflict, to report more errors when we have more than one ISA conflicts. * elfxx-riscv.h (RISCV_DONT_CARE_VERSION): Changed to RISCV_UNKNOWN_VERSION. (riscv_lookup_subset_version): Removed. (riscv_parse_subset_t): Updated. gas/ * config/tc-riscv.c (riscv_get_default_ext_version): Change the version type from unsigned to int. (riscv_set_arch): Use as_bad rather than as_fatal to report more errors. * testsuite/gas/riscv/attribute-02.d: Updated since x must be set with versions. * testsuite/gas/riscv/attribute-03.d: Likewise. * testsuite/gas/riscv/march-ok-two-nse.d: Likewise. * testsuite/gas/riscv/attribute-09.d: zicsr wasn't supported in the spec 2.2, so choose the newer spec. * testsuite/gas/riscv/march-fail-base-01.l: Updated since as_bad. * testsuite/gas/riscv/march-fail-base-02.l: Likewise. * testsuite/gas/riscv/march-fail-order-std.l: Likewise. * testsuite/gas/riscv/march-fail-order-x.l: Likewise. * testsuite/gas/riscv/march-fail-order-z.l: Likewise. * testsuite/gas/riscv/march-fail-porder.l: Likewise. * testsuite/gas/riscv/march-fail-rv32ef.l: Likewise. * testsuite/gas/riscv/march-fail-rv32id.l: Likewise. * testsuite/gas/riscv/march-fail-rv32iq.l: Likewise. * testsuite/gas/riscv/march-fail-rv64iq.l: Likewise. * testsuite/gas/riscv/march-fail-single-char.l: Likewise. * testsuite/gas/riscv/march-fail-unknown-std.l: Likewise. * testsuite/gas/riscv/march-fail-unknown.l: Likewise. * testsuite/gas/riscv/march-fail-uppercase.l: Likewise. * testsuite/gas/riscv/march-fail-version.l: Likewise. * testsuite/gas/riscv/march-fail-isa-spec.d: Likewise. * testsuite/gas/riscv/march-fail-isa-spec.l: Likewise. include/ * opcode/riscv.h (riscv_ext_version): Change the version type from unsigned to int.	5 years ago
Nick Alcock	53651de80f	libctf, include: support foreign-endianness symtabs with CTF The CTF symbol lookup machinery added recently has one deficit: it assumes the symtab is in the machine's native endianness. This is always true when the linker is writing out symtabs (because cross linkers byteswap symbols only after libctf has been called on them), but may be untrue in the cross case when the linker or another tool (objdump, etc) is reading them. Unfortunately the easy way to model this to the caller, as an endianness field in the ctf_sect_t, is precluded because doing so would change the size of the ctf_sect_t, which would be an ABI break. So, instead, allow the endianness of the symtab to be set after open time, by calling one of the two new API functions ctf_symsect_endianness (for ctf_dict_t's) or ctf_arc_symsect_endianness (for entire ctf_archive_t's). libctf calls these functions automatically for objects opened via any of the BFD-aware mechanisms (ctf_bfdopen, ctf_bfdopen_ctfsect, ctf_fdopen, ctf_open, or ctf_arc_open), but the various mechanisms that just take raw ctf_sect_t's will assume the symtab is in native endianness and need a later call to ctf_symsect_endianness to adjust it if needed. (This call is basically free if the endianness is actually native: it only costs anything if the symtab endianness was previously guessed wrong, and there is a symtab, and we are using it directly rather than using symtab indexing.) Obviously, calling ctf_lookup_by_symbol or ctf_symbol_next before the symtab endianness is correctly set will probably give wrong answers -- but you can set it at any time as long as it is before then. include/ChangeLog 2020-11-23 Nick Alcock <nick.alcock@oracle.com> ctf-api.h: Style nit: remove () on function names in comments. (ctf_sect_t): Mention endianness concerns. (ctf_symsect_endianness): New declaration. (ctf_arc_symsect_endianness): Likewise. libctf/ChangeLog 2020-11-23 Nick Alcock <nick.alcock@oracle.com> * ctf-impl.h (ctf_dict_t) <ctf_symtab_little_endian>: New. (struct ctf_archive_internal) <ctfi_symsect_little_endian>: Likewise. * ctf-create.c (ctf_serialize): Adjust for new field. * ctf-open.c (init_symtab): Note the semantics of repeated calls. (ctf_symsect_endianness): New. (ctf_bufopen_internal): Set ctf_symtab_little_endian suitably for the native endianness. (_Static_assert): Moved... (swap_thing): ... with this... * swap.h: ... to here. * ctf-util.c (ctf_elf32_to_link_sym): Use it, byteswapping the Elf32_Sym if the ctf_symtab_little_endian demands it. (ctf_elf64_to_link_sym): Likewise swap the Elf64_Sym if needed. * ctf-archive.c (ctf_arc_symsect_endianness): New, set the endianness of the symtab used by the dicts in an archive. (ctf_archive_iter_internal): Initialize to unknown (assumed native, do not call ctf_symsect_endianness). (ctf_dict_open_by_offset): Call ctf_symsect_endianness if need be. (ctf_dict_open_internal): Propagate the endianness down. (ctf_dict_open_sections): Likewise. * ctf-open-bfd.c (ctf_bfdopen_ctfsect): Get the endianness from the struct bfd and pass it down to the archive. * libctf.ver: Add ctf_symsect_endianness and ctf_arc_symsect_endianness.	5 years ago
Nick Alcock	97a2a623d0	libctf, include: add ctf_getsymsect and ctf_getstrsect libctf has long provided ctf_getdatasect, which hands back a pointer to the CTF section a (read-only) dict came from. But it has no such functions to return pointers to the ELF symbol table or string table it's working from, which is unfortunate because several libctf functions (ctf_open, ctf_fdopen, and ctf_bfdopen) figure out which string and symbol table to use themselves, and don't tell the user what they decided, so the caller can't agree on which symtab to use with libctf even if it wanted to. Add a pair of functions to return the symtab and strtab in use. Like ctf_getdatasect, these return ctf_sect_t structures by value, filled with all-NULL/0 content if a symtab or strtab is not being used. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_getsymsect): New. (ctf_getstrsect): Likewise. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-open.c (ctf_getsymsect): New. (ctf_getstrsect): Likewise. * libctf.ver: Add them.	5 years ago
Nick Alcock	2c78e92523	libctf, include: CTF-archive-wide symbol lookup CTF archives may contain multiple dicts, each of which contain many types and possibly a bunch of symtypetab entries relating to those types: each symtypetab entry is going to appear in exactly one dict, with the corresponding entries in the other dicts empty (either pads, or indexed symtypetabs that do not mention that symbol). But users of libctf usually want to get back the type associated with a symbol without having to dig around to find out which dict that type might be in. This adds machinery to do that -- and since you probably want to do it repeatedly, it adds internal caching to the ctf-archive machinery so that iteration over archives via ctf_archive_next and repeated symbol lookups do not have to repeatedly reopen the archive. (Iteration using ctf_archive_iter will gain caching soon.) Two new API functions: ctf_dict_t * ctf_arc_lookup_symbol (ctf_archive_t arc, unsigned long symidx, ctf_id_t typep, int errp); This looks up the symbol with index SYMIDX in the archive ARC, returning the dictionary in which it resides and optionally the type index as well. Errors are returned in ERRP. The dict should be ctf_dict_close()d when done, but is also cached inside the ctf_archive so that the open cost is only paid once. The result of the symbol lookup is also cached internally, so repeated lookups of the same symbol are nearly free. void ctf_arc_flush_caches (ctf_archive_t arc); Flush all the caches. Done at close time, but also available as an API function if users want to do it by hand. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_arc_lookup_symbol): New. (ctf_arc_flush_caches): Likewise. * ctf.h: Document new auto-ctf_import behaviour. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-impl.h (struct ctf_archive_internal) <ctfi_dicts>: New, dicts the archive machinery has opened and cached. <ctfi_symdicts>: New, cache of dicts containing symbols looked up. <ctfi_syms>: New, cache of types of symbols looked up. * ctf-archive.c (ctf_arc_close): Free them on close. (enosym): New, flag entry for 'symbol not present'. (ctf_arc_import_parent): New, automatically import the parent from ".ctf" if this is a child in an archive and ".ctf" is present. (ctf_dict_open_sections): Use it. (ctf_archive_iter_internal): Likewise. (ctf_cached_dict_close): New, thunk around ctf_dict_close. (ctf_dict_open_cached): New, open and cache a dict. (ctf_arc_flush_caches): New, flush the caches. (ctf_arc_lookup_symbol): New, look up a symbol in (all members of) an archive, and cache the lookup. (ctf_archive_iter): Note the new caching behaviour. (ctf_archive_next): Use ctf_dict_open_cached. * libctf.ver: Add ctf_arc_lookup_symbol and ctf_arc_flush_caches.	5 years ago
Nick Alcock	1136c37971	libctf: symbol type linking support This adds facilities to write out the function info and data object sections, which efficiently map from entries in the symbol table to types. The write-side code is entirely new: the read-side code was merely significantly changed and support for indexed tables added (pointed to by the no-longer-unused cth_objtidxoff and cth_funcidxoff header fields). With this in place, you can use ctf_lookup_by_symbol to look up the types of symbols of function and object type (and, as before, you can use ctf_lookup_variable to look up types of file-scope variables not present in the symbol table, as long as you know their name: but variables that are also data objects are now found in the data object section instead.) (Compatible) file format change: The CTF spec has always said that the function info section looks much like the CTF_K_FUNCTIONs in the type section: an info word (including an argument count) followed by a return type and N argument types. This format is suboptimal: it means function symbols cannot be deduplicated and it causes a lot of ugly code duplication in libctf. But conveniently the compiler has never emitted this! Because it has always emitted a rather different format that libctf has never accepted, we can be sure that there are no instances of this function info section in the wild, and can freely change its format without compatibility concerns or a file format version bump. (And since it has never been emitted in any code that generated any older file format version, either, we need keep no code to read the format as specified at all!) So the function info section is now specified as an array of uint32_t, exactly like the object data section: each entry is a type ID in the type section which must be of kind CTF_K_FUNCTION, the prototype of this function. This allows function types to be deduplicated and also correctly encodes the fact that all functions declared in C really are types available to the program: so they should be stored in the type section like all other types. (In format v4, we will be able to represent the types of static functions as well, but that really does require a file format change.) We introduce a new header flag, CTF_F_NEWFUNCINFO, which is set if the new function info format is in use. A sufficiently new compiler will always set this flag. New libctf will always set this flag: old libctf will refuse to open any CTF dicts that have this flag set. If the flag is not set on a dict being read in, new libctf will disregard the function info section. Format v4 will remove this flag (or, rather, the flag has no meaning there and the bit position may be recycled for some other purpose). New API: Symbol addition: ctf_add_func_sym: Add a symbol with a given name and type. The type must be of kind CTF_K_FUNCTION (a function pointer). Internally this adds a name -> type mapping to the ctf_funchash in the ctf_dict. ctf_add_objt_sym: Add a symbol with a given name and type. The type kind can be anything, including function pointers. This adds to ctf_objthash. These both treat symbols as name -> type mappings: the linker associates symbol names with symbol indexes via the ctf_link_shuffle_syms callback, which sets up the ctf_dynsyms/ctf_dynsymidx/ctf_dynsymmax fields in the ctf_dict. Repeated relinks can add more symbols. Variables that are also exposed as symbols are removed from the variable section at serialization time. CTF symbol type sections which have enough pads, defined by CTF_INDEX_PAD_THRESHOLD (whether because they are in dicts with symbols where most types are unknown, or in archive where most types are defined in some child or parent dict, not in this specific dict) are sorted by name rather than symidx and accompanied by an index which associates each symbol type entry with a name: the existing ctf_lookup_by_symbol will map symbol indexes to symbol names and look the names up in the index automatically. (This is currently ELF-symbol-table-dependent, but there is almost nothing specific to ELF in here and we can add support for other symbol table formats easily). The compiler also uses index sections to communicate the contents of object file symbol tables without relying on any specific ordering of symbols: it doesn't need to sort them, and libctf will detect an unsorted index section via the absence of the new CTF_F_IDXSORTED header flag, and sort it if needed. Iteration: ctf_symbol_next: Iterator which returns the types and names of symbols one by one, either for function or data symbols. This does not require any sorting: the ctf_link machinery uses it to pull in all the compiler-provided symbols cheaply, but it is not restricted to that use. (Compatible) changes in API: ctf_lookup_by_symbol: can now be called for object and function symbols: never returns ECTF_NOTDATA (which is now not thrown by anything, but is kept for compatibility and because it is a plausible error that we might start throwing again at some later date). Internally we also have changes to the ctf-string functionality so that "external" strings (those where we track a string -> offset mapping, but only write out an offset) can be consulted via the usual means (ctf_strptr) before the strtab is written out. This is important because ctf_link_add_linker_symbol can now be handed symbols named via strtab offsets, and ctf_link_shuffle_syms must figure out their actual names by looking in the external symtab we have just been fed by the ctf_link_add_strtab callback, long before that strtab is written out. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_symbol_next): New. (ctf_add_objt_sym): Likewise. (ctf_add_func_sym): Likewise. * ctf.h: Document new function info section format. (CTF_F_NEWFUNCINFO): New. (CTF_F_IDXSORTED): New. (CTF_F_MAX): Adjust accordingly. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-impl.h (CTF_INDEX_PAD_THRESHOLD): New. (_libctf_nonnull_): Likewise. (ctf_in_flight_dynsym_t): New. (ctf_dict_t) <ctf_funcidx_names>: Likewise. <ctf_objtidx_names>: Likewise. <ctf_nfuncidx>: Likewise. <ctf_nobjtidx>: Likewise. <ctf_funcidx_sxlate>: Likewise. <ctf_objtidx_sxlate>: Likewise. <ctf_objthash>: Likewise. <ctf_funchash>: Likewise. <ctf_dynsyms>: Likewise. <ctf_dynsymidx>: Likewise. <ctf_dynsymmax>: Likewise. <ctf_in_flight_dynsym>: Likewise. (struct ctf_next) <u.ctn_next>: Likewise. (ctf_symtab_skippable): New prototype. (ctf_add_funcobjt_sym): Likewise. (ctf_dynhash_sort_by_name): Likewise. (ctf_sym_to_elf64): Rename to... (ctf_elf32_to_link_sym): ... this, and... (ctf_elf64_to_link_sym): ... this. * ctf-open.c (init_symtab): Check for lack of CTF_F_NEWFUNCINFO flag, and presence of index sections. Refactor out ctf_symtab_skippable and ctf_elf_to_link_sym, and use them. Use ctf_link_sym_t, not Elf64_Sym. Skip initializing objt or func sxlate sections if corresponding index section is present. Adjust for new func info section format. (ctf_bufopen_internal): Add ctf_err_warn to corrupt-file error handling. Report incorrect-length index sections. Always do an init_symtab, even if there is no symtab section (there may be index sections still). (flip_objts): Adjust comment: func and objt sections are actually identical in structure now, no need to caveat. (ctf_dict_close): Free newly-added data structures. ctf-create.c (ctf_create): Initialize them. (ctf_symtab_skippable): New, refactored out of init_symtab, with st_nameidx_set check added. (ctf_add_funcobjt_sym): New, add a function or object symbol to the ctf_objthash or ctf_funchash, by name. (ctf_add_objt_sym): Call it. (ctf_add_func_sym): Likewise. (symtypetab_delete_nonstatic_vars): New, delete vars also present as data objects. (CTF_SYMTYPETAB_EMIT_FUNCTION): New flag to symtypetab emitters: this is a function emission, not a data object emission. (CTF_SYMTYPETAB_EMIT_PAD): New flag to symtypetab emitters: emit pads for symbols with no type (only set for unindexed sections). (CTF_SYMTYPETAB_FORCE_INDEXED): New flag to symtypetab emitters: always emit indexed. (symtypetab_density): New, figure out section sizes. (emit_symtypetab): New, emit a symtypetab. (emit_symtypetab_index): New, emit a symtypetab index. (ctf_serialize): Call them, emitting suitably sorted symtypetab sections and indexes. Set suitable header flags. Copy over new fields. * ctf-hash.c (ctf_dynhash_sort_by_name): New, used to impose an order on symtypetab index sections. * ctf-link.c (ctf_add_type_mapping): Delete erroneous comment relating to code that was never committed. (ctf_link_one_variable): Improve variable name. (check_sym): New, symtypetab analogue of check_variable. (ctf_link_deduplicating_one_symtypetab): New. (ctf_link_deduplicating_syms): Likewise. (ctf_link_deduplicating): Call them. (ctf_link_deduplicating_per_cu): Note that we don't call them in this case (yet). (ctf_link_add_strtab): Set the error on the fp correctly. (ctf_link_add_linker_symbol): New (no longer a do-nothing stub), add a linker symbol to the in-flight list. (ctf_link_shuffle_syms): New (no longer a do-nothing stub), turn the in-flight list into a mapping we can use, now its names are resolvable in the external strtab. * ctf-string.c (ctf_str_rollback_atom): Don't roll back atoms with external strtab offsets. (ctf_str_rollback): Adjust comment. (ctf_str_write_strtab): Migrate ctf_syn_ext_strtab population from writeout time... (ctf_str_add_external): ... to string addition time. * ctf-lookup.c (ctf_lookup_var_key_t): Rename to... (ctf_lookup_idx_key_t): ... this, now we use it for syms too. <clik_names>: New member, a name table. (ctf_lookup_var): Adjust accordingly. (ctf_lookup_variable): Likewise. (ctf_lookup_by_id): Shuffle further up in the file. (ctf_symidx_sort_arg_cb): New, callback for... (sort_symidx_by_name): ... this new function to sort a symidx found to be unsorted (likely originating from the compiler). (ctf_symidx_sort): New, sort a symidx. (ctf_lookup_symbol_name): Support dynamic symbols with indexes provided by the linker. Use ctf_link_sym_t, not Elf64_Sym. Check the parent if a child lookup fails. (ctf_lookup_by_symbol): Likewise. Work for function symbols too. (ctf_symbol_next): New, iterate over symbols with types (without sorting). (ctf_lookup_idx_name): New, bsearch for symbol names in indexes. (ctf_try_lookup_indexed): New, attempt an indexed lookup. (ctf_func_info): Reimplement in terms of ctf_lookup_by_symbol. (ctf_func_args): Likewise. (ctf_get_dict): Move... * ctf-types.c (ctf_get_dict): ... here. * ctf-util.c (ctf_sym_to_elf64): Re-express as... (ctf_elf64_to_link_sym): ... this. Add new st_symidx field, and st_nameidx_set (always 0, so st_nameidx can be ignored). Look in the ELF strtab for names. (ctf_elf32_to_link_sym): Likewise, for Elf32_Sym. (ctf_next_destroy): Destroy ctf_next_t.u.ctn_next if need be. * libctf.ver: Add ctf_symbol_next, ctf_add_objt_sym and ctf_add_func_sym.	5 years ago
Nick Alcock	3d16b64e28	bfd, include, ld, binutils, libctf: CTF should use the dynstr/sym This is embarrassing. The whole point of CTF is that it remains intact even after a binary is stripped, providing a compact mapping from symbols to types for everything in the externally-visible interface of an ELF object: it has connections to the symbol table for that purpose, and to the string table to avoid duplicating symbol names. So it's a shame that the hooks I implemented last year served to hook it up to the .symtab and .strtab, which obviously disappear on strip, leaving any accompanying the CTF dict containing references to strings (and, soon, symbols) which don't exist any more because their containing strtab has been vaporized. The original Solaris design used .dynsym and .dynstr (well, actually, .ldynsym, which has more symbols) which do not disappear. So should we. Thankfully the work we did before serves as guide rails, and adjusting things to use the .dynstr and .dynsym was fast and easy. The only annoyance is that the dynsym is assembled inside elflink.c in a fairly piecemeal fashion, so that the easiest way to get the symbols out was to hook in before every call to swap_symbol_out (we also leave in a hook in front of symbol additions to the .symtab because it seems plausible that we might want to hook them in future too: for now that hook is unused). We adjust things so that rather than being offered a whole hash table of symbols at once, libctf is now given symbols one at a time, with st_name indexes already resolved and pointing at their final .dynstr offsets: it's now up to libctf to resolve these to names as needed using the strtab info we pass it separately. Some bits might be contentious. The ctf_new_dynstr callback takes an elf_internal_sym, and this remains an elf_internal_sym right down through the generic emulation layers into ldelfgen. This is no worse than the elf_sym_strtab we used to pass down, but in the future when we gain non-ELF CTF symtab support we might want to lower the elf_internal_sym to some other representation (perhaps a ctf_link_symbol) in bfd or in ldlang_ctf_new_dynsym. We rename the 'apply_strsym' hooks to 'acquire_strings' instead, becuse they no longer have anything to do with symbols. There are some API changes to pieces of API which are technically public but actually totally unused by anything and/or unused by anything but ld so they can change freely: the ctf_link_symbol gains new fields to allow symbol names to be given as strtab offsets as well as strings, and a symidx so that the symbol index can be passed in. ctf_link_shuffle_syms loses its callback parameter: the idea now is that linkers call the new ctf_link_add_linker_symbol for every symbol in .dynsym, feed in all the strtab entries with ctf_link_add_strtab, and then a call to ctf_link_shuffle_syms will apply both and arrange to use them to reorder the CTF symtab at CTF serialization time (which is coming in the next commit). Inside libctf we have a new preamble flag CTF_F_DYNSTR which is always set in v3-format CTF dicts from this commit forwards: CTF dicts without this flag are associated with .strtab like they used to be, so that old dicts' external strings don't turn to garbage when loaded by new libctf. Dicts with this flag are associated with .dynstr and .dynsym instead. (The flag is not the next in sequence because this commit was written quite late: the missing flags will be filled in by the next commit.) Tests forthcoming in a later commit in this series. bfd/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * elflink.c (elf_finalize_dynstr): Call examine_strtab after dynstr finalization. (elf_link_swap_symbols_out): Don't call it here. Call ctf_new_symbol before swap_symbol_out. (elf_link_output_extsym): Call ctf_new_dynsym before swap_symbol_out. (bfd_elf_final_link): Likewise. * elf.c (swap_out_syms): Pass in bfd_link_info. Call ctf_new_symbol before swap_symbol_out. (_bfd_elf_compute_section_file_positions): Adjust. binutils/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * readelf.c (dump_section_as_ctf): Use .dynsym and .dynstr, not .symtab and .strtab. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * bfdlink.h (struct elf_sym_strtab): Replace with... (struct elf_internal_sym): ... this. (struct bfd_link_callbacks) <examine_strtab>: Take only a symstrtab argument. <ctf_new_symbol>: New. <ctf_new_dynsym>: Likewise. * ctf-api.h (struct ctf_link_sym) <st_symidx>: New. <st_nameidx>: Likewise. <st_nameidx_set>: Likewise. (ctf_link_iter_symbol_f): Removed. (ctf_link_shuffle_syms): Remove most parameters, just takes a ctf_dict_t now. (ctf_link_add_linker_symbol): New, split from ctf_link_shuffle_syms. * ctf.h (CTF_F_DYNSTR): New. (CTF_F_MAX): Adjust. ld/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ldelfgen.c (struct ctf_strsym_iter_cb_arg): Rename to... (struct ctf_strtab_iter_cb_arg): ... this, changing fields: <syms>: Remove. <symcount>: Remove. <symstrtab>: Rename to... <strtab>: ... this. (ldelf_ctf_strtab_iter_cb): Adjust. (ldelf_ctf_symbols_iter_cb): Remove. (ldelf_new_dynsym_for_ctf): New, tell libctf about a single symbol. (ldelf_examine_strtab_for_ctf): Rename to... (ldelf_acquire_strings_for_ctf): ... this, only doing the strtab portion and not symbols. * ldelfgen.h: Adjust declarations accordingly. * ldemul.c (ldemul_examine_strtab_for_ctf): Rename to... (ldemul_acquire_strings_for_ctf): ... this. (ldemul_new_dynsym_for_ctf): New. * ldemul.h: Adjust declarations accordingly. * ldlang.c (ldlang_ctf_apply_strsym): Rename to... (ldlang_ctf_acquire_strings): ... this. (ldlang_ctf_new_dynsym): New. (lang_write_ctf): Call ldemul_new_dynsym_for_ctf with NULL to do the actual symbol shuffle. * ldlang.h (struct elf_strtab_hash): Adjust accordingly. * ldmain.c (bfd_link_callbacks): Wire up new/renamed callbacks. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-link.c (ctf_link_shuffle_syms): Adjust. (ctf_link_add_linker_symbol): New, unimplemented stub. * libctf.ver: Add it. * ctf-create.c (ctf_serialize): Set CTF_F_DYNSTR on newly-serialized dicts. * ctf-open-bfd.c (ctf_bfdopen_ctfsect): Check for the flag: open the symtab/strtab if not present, dynsym/dynstr otherwise. * ctf-archive.c (ctf_arc_bufpreamble): New, get the preamble from some arbitrary member of a CTF archive. * ctf-impl.h (ctf_arc_bufpreamble): Declare it.	5 years ago
Nick Alcock	ae41200ba8	libctf, include, binutils, gdb: rename CTF-opening functions The functions that return ctf_dict_t's given a ctf_archive_t and a name are very clumsily named. It sounds like they return archives, not dictionaries, and the names are very long and clunky. Why do we have a ctf_arc_open_by_name when it opens a dictionary, not an archive, and when there is no way to open a dictionary in any other way? The answer is purely internal: the function is located in ctf-archive.c, and everything in there was called ctf_arc_, and there is another way to open a dict (by offset in the archive), that is internal to ctf-archive.c and that nothing else can call. This is clearly bad naming. The internal organization of the source tree should not dictate public API names! So rename things (keeping the old, bad names for compatibility), and adjust all users. You now open a dict using ctf_dict_open, and open it giving ELF sections via ctf_dict_open_sections. binutils/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> objdump.c (dump_ctf): Use ctf_dict_open, not ctf_arc_open_by_name. * readelf.c (dump_section_as_ctf): Likewise. gdb/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctfread.c (elfctf_build_psymtabs): Use ctf_dict_open, not ctf_arc_open_by_name. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_arc_open_by_name): Rename to... (ctf_dict_open): ... this, keeping compatibility function. (ctf_arc_open_by_name_sections): Rename to... (ctf_dict_open_sections): ... this, keeping compatibility function. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-archive.c (ctf_arc_open_by_offset): Rename to... (ctf_dict_open_by_offset): ... this. Adjust callers. (ctf_arc_open_by_name_internal): Rename to... (ctf_dict_open_internal): ... this. Adjust callers. (ctf_arc_open_by_name_sections): Rename to... (ctf_dict_open_sections): ... this, keeping compatibility function. (ctf_arc_open_by_name): Rename to... (ctf_dict_open): ... this, keeping compatibility function. * libctf.ver: New functions added. * ctf-link.c (ctf_link_one_input_archive): Adjusted accordingly. (ctf_link_deduplicating_open_inputs): Likewise.	5 years ago
Nick Alcock	139633c307	libctf, include, binutils, gdb, ld: rename ctf_file_t to ctf_dict_t The naming of the ctf_file_t type in libctf is a historical curiosity. Back in the Solaris days, CTF dictionaries were originally generated as a separate file and then (sometimes) merged into objects: hence the datatype was named ctf_file_t, and known as a "CTF file". Nowadays, raw CTF is essentially never written to a file on its own, and the datatype changed name to a "CTF dictionary" years ago. So the term "CTF file" refers to something that is never a file! This is at best confusing. The type has also historically been known as a 'CTF container", which is even more confusing now that we have CTF archives which are also a sort of container (they contain CTF dictionaries), but which are never referred to as containers in the source code. So fix this by completing the renaming, renaming ctf_file_t to ctf_dict_t throughout, and renaming those few functions that refer to CTF files by name (keeping compatibility aliases) to refer to dicts instead. Old users who still refer to ctf_file_t will see (harmless) pointer-compatibility warnings at compile time, but the ABI is unchanged (since C doesn't mangle names, and ctf_file_t was always an opaque type) and things will still compile fine as long as -Werror is not specified. All references to CTF containers and CTF files in the source code are fixed to refer to CTF dicts instead. Further (smaller) renamings of annoyingly-named functions to come, as part of the process of souping up queries across whole archives at once (needed for the function info and data object sections). binutils/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * objdump.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t. (dump_ctf_archive_member): Likewise. (dump_ctf): Likewise. Use ctf_dict_close, not ctf_file_close. * readelf.c (dump_ctf_errs): Rename ctf_file_t to ctf_dict_t. (dump_ctf_archive_member): Likewise. (dump_section_as_ctf): Likewise. Use ctf_dict_close, not ctf_file_close. gdb/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctfread.c: Change uses of ctf_file_t to ctf_dict_t. (ctf_fp_info::~ctf_fp_info): Call ctf_dict_close, not ctf_file_close. include/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-api.h (ctf_file_t): Rename to... (ctf_dict_t): ... this. Keep ctf_file_t around for compatibility. (struct ctf_file): Likewise rename to... (struct ctf_dict): ... this. (ctf_file_close): Rename to... (ctf_dict_close): ... this, keeping compatibility function. (ctf_parent_file): Rename to... (ctf_parent_dict): ... this, keeping compatibility function. All callers adjusted. * ctf.h: Rename references to ctf_file_t to ctf_dict_t. (struct ctf_archive) <ctfa_nfiles>: Rename to... <ctfa_ndicts>: ... this. ld/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ldlang.c (ctf_output): This is a ctf_dict_t now. (lang_ctf_errs_warnings): Rename ctf_file_t to ctf_dict_t. (ldlang_open_ctf): Adjust comment. (lang_merge_ctf): Use ctf_dict_close, not ctf_file_close. * ldelfgen.h (ldelf_examine_strtab_for_ctf): Rename ctf_file_t to ctf_dict_t. Change opaque declaration accordingly. * ldelfgen.c (ldelf_examine_strtab_for_ctf): Adjust. * ldemul.h (examine_strtab_for_ctf): Likewise. (ldemul_examine_strtab_for_ctf): Likewise. * ldeuml.c (ldemul_examine_strtab_for_ctf): Likewise. libctf/ChangeLog 2020-11-20 Nick Alcock <nick.alcock@oracle.com> * ctf-impl.h: Rename ctf_file_t to ctf_dict_t: all declarations adjusted. (ctf_fileops): Rename to... (ctf_dictops): ... this. (ctf_dedup_t) <cd_id_to_file_t>: Rename to... <cd_id_to_dict_t>: ... this. (ctf_file_t): Fix outdated comment. <ctf_fileops>: Rename to... <ctf_dictops>: ... this. (struct ctf_archive_internal) <ctfi_file>: Rename to... <ctfi_dict>: ... this. * ctf-archive.c: Rename ctf_file_t to ctf_dict_t. Rename ctf_archive.ctfa_nfiles to ctfa_ndicts. Rename ctf_file_close to ctf_dict_close. All users adjusted. * ctf-create.c: Likewise. Refer to CTF dicts, not CTF containers. (ctf_bundle_t) <ctb_file>: Rename to... <ctb_dict): ... this. * ctf-decl.c: Rename ctf_file_t to ctf_dict_t. * ctf-dedup.c: Likewise. Rename ctf_file_close to ctf_dict_close. Refer to CTF dicts, not CTF containers. * ctf-dump.c: Likewise. * ctf-error.c: Likewise. * ctf-hash.c: Likewise. * ctf-inlines.h: Likewise. * ctf-labels.c: Likewise. * ctf-link.c: Likewise. * ctf-lookup.c: Likewise. * ctf-open-bfd.c: Likewise. * ctf-string.c: Likewise. * ctf-subr.c: Likewise. * ctf-types.c: Likewise. * ctf-util.c: Likewise. * ctf-open.c: Likewise. (ctf_file_close): Rename to... (ctf_dict_close): ...this. (ctf_file_close): New trivial wrapper around ctf_dict_close, for compatibility. (ctf_parent_file): Rename to... (ctf_parent_dict): ... this. (ctf_parent_file): New trivial wrapper around ctf_parent_dict, for compatibility. * libctf.ver: Add ctf_dict_close and ctf_parent_dict.	5 years ago
Jozef Lawrynowicz	99fabbc973	Support SHF_GNU_RETAIN ELF section flag The SHF_GNU_RETAIN section flag is an extension to the GNU ELF OSABI. It is defined as follows: ========================================================= Section Attribute Flags +-------------------------------------+ \| Name \| Value \| +-------------------------------------+ \| SHF_GNU_RETAIN \| 0x200000 (1 << 21) \| +-------------------------------------+ SHF_GNU_RETAIN The link editor should not garbage collect the section. ========================================================= The .section directive accepts the "R" flag, which indicates SHF_GNU_RETAIN should be applied to the section. There is not a direct mapping of SHF_GNU_RETAIN to the BFD section flag SEC_KEEP. Keeping these flags distinct allows SHF_GNU_RETAIN sections to be explicitly removed by placing them in /DISCARD/. bfd/ChangeLog: * elf-bfd.h (enum elf_gnu_osabi): Add elf_gnu_osabi_retain. (struct elf_obj_tdata): Increase has_gnu_osabi to 4 bits. * elf.c (_bfd_elf_make_section_from_shdr): Set elf_gnu_osabi_retain for SHF_GNU_RETAIN. (_bfd_elf_final_write_processing): Report if SHF_GNU_RETAIN is not supported by the OSABI. Adjust error messages. * elflink.c (elf_link_input_bfd): Copy enabled has_gnu_osabi bits from input BFD to output BFD. (bfd_elf_gc_sections): gc_mark the section if SHF_GNU_RETAIN is set. binutils/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * readelf.c (get_elf_section_flags): Handle SHF_GNU_RETAIN. Recognize SHF_GNU_RETAIN and SHF_GNU_MBIND only for supported OSABIs. * testsuite/binutils-all/readelf.exp: Run new tests. Don't run run_dump_test when there isn't an assembler available. * testsuite/lib/binutils-common.exp (supports_gnu_osabi): Adjust comment. * testsuite/binutils-all/readelf-maskos-1a.d: New test. * testsuite/binutils-all/readelf-maskos-1b.d: New test. * testsuite/binutils-all/readelf-maskos.s: New test. * testsuite/binutils-all/retain1.s: New test. * testsuite/binutils-all/retain1a.d: New test. * testsuite/binutils-all/retain1b.d: New test. gas/ChangeLog: * NEWS: Announce SHF_GNU_RETAIN support. * config/obj-elf.c (obj_elf_change_section): Merge SHF_GNU_RETAIN bit between section declarations. (obj_elf_parse_section_letters): Handle 'R' flag. Handle numeric flag values within the SHF_MASKOS range. (obj_elf_section): Validate SHF_GNU_RETAIN usage. * doc/as.texi: Document 'R' flag to .section directive. * testsuite/gas/elf/elf.exp: Run new tests. * testsuite/gas/elf/section10.d: Unset SHF_GNU_RETAIN bit. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section22.d: New test. * testsuite/gas/elf/section22.s: New test. * testsuite/gas/elf/section23.s: New test. * testsuite/gas/elf/section23a.d: New test. * testsuite/gas/elf/section23b.d: New test. * testsuite/gas/elf/section23b.err: New test. * testsuite/gas/elf/section24.l: New test. * testsuite/gas/elf/section24.s: New test. * testsuite/gas/elf/section24a.d: New test. * testsuite/gas/elf/section24b.d: New test. include/ChangeLog: * elf/common.h (SHF_GNU_RETAIN): Define. ld/ChangeLog: * NEWS: Announce support for SHF_GNU_RETAIN. * ld.texi (garbage collection): Document SHF_GNU_RETAIN. (Output Section Discarding): Likewise. * testsuite/ld-elf/elf.exp: Run new tests. * testsuite/ld-elf/retain1.s: New test. * testsuite/ld-elf/retain1a.d: New test. * testsuite/ld-elf/retain1b.d: New test. * testsuite/ld-elf/retain2.d: New test. * testsuite/ld-elf/retain2.ld: New test. * testsuite/ld-elf/retain2.map: New test. * testsuite/ld-elf/retain3.d: New test. * testsuite/ld-elf/retain3.s: New test. * testsuite/ld-elf/retain4.d: New test. * testsuite/ld-elf/retain4.s: New test. * testsuite/ld-elf/retain5.d: New test. * testsuite/ld-elf/retain5.map: New test. * testsuite/ld-elf/retain5lib.s: New test. * testsuite/ld-elf/retain5main.s: New test. * testsuite/ld-elf/retain6a.d: New test. * testsuite/ld-elf/retain6b.d: New test. * testsuite/ld-elf/retain6lib.s: New test. * testsuite/ld-elf/retain6main.s: New test.	5 years ago
Przemyslaw Wirkus	e64441b14c	aarch64: Extract Condition flag manipulation feature from Armv8.4-A Extract FLAGM (Condition flag manipulation) feature from Armv8.4-A. Please note that FLAGM stays a Armv8.4-A feature but now can be assigned to other architectures or CPUs. New -march option +flagm is added to enable independently this feature.	5 years ago
Spencer E. Olson	9372689d72	Add support for the LMBD (left-most bit detect) instruction to the PRU assembler. include * opcode/pru.h: Add LMBD (left-most bit detect) opcode index opcodes * pru-opc.c: Add opcode description for LMBD (left-most bit detect) gas * testsuite/gas/pru/misc.s: Add tests for lmbd (left-most bit detect) * testsuite/gas/pru/misc.d: Add tests for lmbd (left-most bit	5 years ago
Przemyslaw Wirkus	8edca81ece	aarch64: Limit Rt register number for LS64 load/store instructions Atomic 64-byte load/store instructions limit Rt register number to values matching below condition (register <Xt> number must be even and <= 22): if Rt<4:3> == '11' \|\| Rt<0> == '1' then UNDEFINED; This patch adds check if Rt fulfills above requirement. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i	5 years ago
Przemyslaw Wirkus	af1bd771fc	aarch64: Extract Pointer Authentication feature from Armv8.3-A Extract PAC (Pointer Authentication) feature from Armv8.3-A. Please note that PAC stays a Armv8.3-A feature but now can be assigned to other architectures or CPUs.	5 years ago
Przemyslaw Wirkus	55cc012834	aarch64: Update feature RAS system registers This patch: + updates RAS feature system registers with new RAS 1.1 regs. + extends RAS/RAS 1.1 support for all architecture levels of Armv8-A. Please note that early Armv8-A architectures do not officially support RAS extension. Rationale of the patch: To ease development so that user-friendly RAS system registers operands can be used. Certain use cases require developers to enable only more generic architecture (e.g. -march=armv8-a) during system development. Users must use RAS extension registers bearing in mind that system they use must support it. The RAS (Reliability, Availability, Serviceability) extension is a system-level extension that defines a number of system registers. RAS 1.1 (FEAT_RASv1p1) introduces five new system registers: ERXPFGCTL_EL1, ERXPFGCDN_EL1, ERXMISC2_EL1, ERXMISC3_EL1 and ERXPFGF_EL1. For details see [0]. [0] https://developer.arm.com/docs/ddi0595/i/	5 years ago
Przemyslaw Wirkus	fd65497db4	[PATCH][GAS] aarch64: Add atomic 64-byte load/store instructions for Armv8.7 Armv8.7 architecture introduces the "accelerator extension", aka load/store of 64 bytes. New atomic load/store instructions are: LD64B, ST64B, ST64BV and ST64BV0. This patch adds: + New feature +ls64 to -march command line. + New atomic load/store instructions associated with above feature. For more details regarding atomic 64-byte load/store instruction for Armv8.7 please refer to Arm A64 Instruction set documentation for Armv8-A architecture profile, see document page 157 for load instruction, and pages 414-418 for store instructions of [0]. [0]: https://developer.arm.com/docs/ddi0596/i	5 years ago
Przemyslaw Wirkus	3a959875ea	[PATCH] aarch64: Update missing ChangeLog for AArch64 commits Patch with missing ChangeLog entries for GAS AArch64 files.	5 years ago
H.J. Lu	b0ab069373	x86: Support GNU_PROPERTY_X86_ISA_1_BASELINE marker GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 X86 ISA markers are updated: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 GNU_PROPERTY_X86_ISA_1_BASELINE is added and GNU_PROPERTY_X86_ISA_1_V[234] are updated: #define GNU_PROPERTY_X86_ISA_1_BASELINE (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 2) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 3) Add -z x86-64-baseline linker command line option to mark x86-64-baseline ISA level as needed. bfd/ PR gas/26703 * elfxx-x86.c (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_BASELINE for -z x86-64-baseline. binutils/ PR gas/26703 * readelf.c (decode_x86_isa): Handle * GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (output_insn): Update for GNU_PROPERTY_X86_ISA_1_BASELINE. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/property-11.d: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_BASELINE): New. (GNU_PROPERTY_X86_ISA_1_V2): Uppdated. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-baseline. * ld.texi: Document -z x86-64-baseline. * emulparams/x86-64-level.sh: Handle -z x86-64-baseline. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c-x32.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-isa4. * testsuite/ld-i386/property-x86-isa4.d: New file. * testsuite/ld-x86-64/property-x86-isa4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa4.d: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-isa4 and property-x86-isa4-x32.	6 years ago
Cooper Qu	9d1ccf22fd	CSKY: Add version flag in eflag and fix bug in disassembling register. gas/ * config/tc-csky.c (md_begin): Add version flag in eflag. include/ * opcode/csky.h (CSKY_VERSION_V1): Define, currently used. (CSKY_VERSION_V2): Define. (CSKY_VERSION_V3): Define. Change-Id: Iafe3a9ce6fe544880a225b9fae439275a828bb34	6 years ago
Tom Tromey	0d01fbe64f	Remove libctf/mkerrors.sed This patch removes libctf/mkerrors.sed, replacing it with a macro in ctf-api.h. This simplifies the build and avoids possible unportable code in the sed script. 2020-10-21 Tom Tromey <tromey@adacore.com> * ctf-api.h (_CTF_ERRORS): New macro. libctf/ChangeLog 2020-10-21 Tom Tromey <tromey@adacore.com> * mkerrors.sed: Remove. * ctf-error.c (_CTF_FIRST): New define. (_CTF_ITEM): Define this, not _CTF_STR. (_ctf_errlist, _ctf_erridx): Use _CTF_ERRORS. (ERRSTRFIELD): Rewrite. (ERRSTRFIELD1): Remove. * Makefile.in: Rebuild. * Makefile.am (BUILT_SOURCES): Remove. (ctf-error.h): Remove.	6 years ago
Nelson Chu	02dd9d2568	RISC-V: Support GNU indirect functions. Generally, glibc dynamic linker should have two ways to deal with ifunc - one is to handle the IRELATIVE relocations for the non-preemtive ifunc symbols, the other is to handle the R_RISCV_32/64 and R_RISCV_JUMP_SLOT relocations with the STT_IFUNC preemtive symbols. No matter which method is used, both of them should get the resolved ifunc symbols at runtime. Therefore, linker needs to generate the correct dynamic relocations for ifunc to make sure the the dynamic linker works well. For now, there are thirteen relocations are supported for ifunc in GNU ld, * R_RISCV_CALL and R_RISCV_CALL_PLT: The RISC-V compiler won't generate R_RISCV_JAL directly to jump to an ifunc. Besides, we disable the relaxations for the relocation referenced to ifunc, so just handling the R_RISCV_CALL and R_RISCV_CALL_PLT should be enough. Linker should generate a .plt entry and a .got.plt entry for it, and also needs to insert a dynamic IRELATIVE in the .got.plt enrty, or insert a R_RISCV_JUMP_SLOT when generating shared library. * R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO12_I/S: LA/LLA pattern with local fPIC ifunc symbol, or any non-PIC ifunc symbol. The PC-relative relocation. The current linker will deal with them in the same way as R_RISCV_CALL_PLT. * R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO12_I/S: LA pattern with global PIC ifunc symbol. Linker should insert a dynamic IRELATIVE in the .got entry, or insert a R_RISCV_32/64 when generating shared library. * R_RISCV_32 and R_RISCV_64: Store the ifunc symbol into the data section. Linker should insert a dynamic IRELATIVE in the data section, or insert a R_RISCV_32/64 when generating shared library. * R_RISCV_HI20 and R_RISCV_LO12_I/S: The LUI + ADDI/LW/SW patterns. The absolute access relocation. The medlow model without the -fPIC compiler option should generate them. The ld ifunc testsuites "Build pr23169a" and "Build pr23169d" need the relocations, they are in the ld/testsuite/ld-ifunc/, and need compiler support. However, we also made some optimizations with reference to x86, * If GOT and PLT relocations refer to the same ifunc symbol when generating pie, then they can actually share a .got entry without creating two entries to store the same value and relocation. * If GOT, PLT and DATA relocations refer to the same ifunc symbol when generating position dependency executable, then linker will fill the address of .plt entry into the corresponding .got entry and data section, without insert any dynamic relocations for the GOT and DATA relocations. For the ifunc testcases, there are three types of them, 1. ifunc-reloc-: Only check the single type of relocation refers to ifunc symbol. ifunc-reloc-call: R_RISCV_CALL and R_RISCV_CALL_PLT. * ifunc-reloc-data: R_RISCV_32 and R_RISCV_64. * ifunc-reloc-got: R_RISCV_GOT_HI20 and R_RISCV_PCREL_LO_I/S. * ifunc-reloc-pcrel: R_RISCV_PCREL_HI20 and R_RISCV_PCREL_LO_I/S. 2. ifunc-[nonplt\|plt]-: If we don't have PLT relocs, then don't need to create the PLT and it's .plt entries. ifunc-nonplt: Combine R_RISCV_GOT_HI20 and R_RISCV_32/64. * ifunc-plt: Combine all ifunc relocations. 3. ifunc-seperate-: If we link the ifunc caller and resolver into the same module (link the objects), then the results are the same as the ifunc-reloc- and ifunc-[noplt\|plt]-* testcases. Consider the cases that the ifunc callers and resolver are in the different modules, that is, we compile the ifunc resolver to the shared library first, and then link it with the ifunc callers. The output of ifunc callers should be the same as the normal STT_FUNC cases, and the shared ifunc resolver should define the symbols as STT_IFUNC. The R_RISCV_PCREL_HI20 reloc is special. It should be linked and resolved locally, so if the ifunc resolver is defined in other modules (other shared libraries), then the R_RISCV_PCREL_HI20 is unresolvable, and linker should issue an unresolvable reloc error. bfd/ * elfnn-riscv.c: Include "objalloc.h" since we need objalloc_alloc. (riscv_elf_link_hash_table): Add loc_hash_table and loc_hash_memory for local STT_GNU_IFUNC symbols. (riscv_elf_got_plt_val): Removed. (riscv_elf_local_htab_hash, riscv_elf_local_htab_eq): New functions. Use to compare local hash entries. (riscv_elf_get_local_sym_hash): New function. Find a hash entry for local symbol, and create a new one if needed. (riscv_elf_link_hash_table_free): New function. Destroy an riscv elf linker hash table. (riscv_elf_link_hash_table_create): Create hash table for local ifunc. (riscv_elf_check_relocs): Create a fake global symbol to track the local ifunc symbol. Add support to check and handle the relocations reference to ifunc symbols. (allocate_dynrelocs): Let allocate_ifunc_dynrelocs and allocate_local_ifunc_dynrelocs to handle the ifunc symbols if they are defined and referenced in a non-shared object. (allocate_ifunc_dynrelocs): New function. Allocate space in .plt, .got and associated reloc sections for ifunc dynamic relocs. (allocate_local_ifunc_dynrelocs): Likewise, but for local ifunc dynamic relocs. (riscv_elf_relocate_section): Add support to handle the relocation referenced to ifunc symbols. (riscv_elf_size_dynamic_sections): Updated. (riscv_elf_adjust_dynamic_symbol): Updated. (riscv_elf_finish_dynamic_symbol): Finish up the ifunc handling, including fill the PLT and GOT entries for ifunc symbols. (riscv_elf_finish_local_dynamic_symbol): New function. Called by riscv_elf_finish_dynamic_symbol to handle the local ifunc symbols. (_bfd_riscv_relax_section): Don't do the relaxation for ifunc. * elfxx-riscv.c: Add R_RISCV_IRELATIVE. * configure.ac: Link elf-ifunc.lo to use the generic ifunc support. * configure: Regenerated. include/ * elf/riscv.h: Add R_RISCV_IRELATIVE to 58. ld/ * emulparams/elf32lriscv-defs.sh: Add IREL_IN_PLT. * testsuite/ld-ifunc/ifunc.exp: Enable ifunc tests for RISC-V. * testsuite/ld-riscv-elf/ld-riscv-elf.exp (run_dump_test_ifunc): New dump test for ifunc. There are two arguments, 'target` and `output`. The `target` is rv32 or rv64, and the `output` is used to choose which output you want to test (exe, pie or .so). * testsuite/ld-riscv-elf/ifunc-reloc-call-01.s: New testcase. * testsuite/ld-riscv-elf/ifunc-reloc-call-01.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-01-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-call-02-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-data-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-got-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel.s: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel.d: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-reloc-pcrel-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt.s: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt.d: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-nonplt-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01.s: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01.d: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-01-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02.s: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02.d: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-exe.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-pic.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-plt-02-pie.rd: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-resolver.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-caller.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-exe.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pic.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pie.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-caller-pcrel.s: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pic.d: Likewise. * testsuite/ld-riscv-elf/ifunc-seperate-pcrel-pie.d: Likewise.	6 years ago
H.J. Lu	32930e4edb	x86: Support GNU_PROPERTY_X86_ISA_1_V[234] marker GCC 11 supports -march=x86-64-v[234] to enable x86 micro-architecture ISA levels: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=97250 Update GNU_PROPERTY_X86_ISA_1_XXX macros: https://gitlab.com/x86-psABIs/x86-64-ABI/-/merge_requests/13 in x86 ELF binaries to indicate that micro-architecture ISA levels required to execute the binary: #define GNU_PROPERTY_X86_ISA_1_NEEDED (GNU_PROPERTY_X86_UINT32_OR_LO + 2) #define GNU_PROPERTY_X86_ISA_1_USED (GNU_PROPERTY_X86_UINT32_OR_AND_LO + 2) #define GNU_PROPERTY_X86_ISA_1_V2 (1U << 0) #define GNU_PROPERTY_X86_ISA_1_V3 (1U << 1) #define GNU_PROPERTY_X86_ISA_1_V4 (1U << 2) The previous GNU_PROPERTY_X86_ISA_1_XXX macros are deprecated and renamed to GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX. In addition to EM_X86_64, GNU_PROPERTY_X86_ISA_1_V[234] marker can be used by ld.so to detect the x86-64-v4 shared library placed in an x86-64-v2 directory by mistake on an x86-64-v2 machine to avoid crashes on x86-64-v4 instructions. Add -z x86-64-v[234] linker command line option to mark x86-64-v[234] ISA level as needed. Also add #define GNU_PROPERTY_X86_FEATURE_2_MASK (1U << 11) for mask registers. bfd/ PR gas/26703 * elf-linker-x86.h (elf_linker_x86_params): Add isa_level. * elfxx-x86.c (_bfd_x86_elf_merge_gnu_properties): Merge GNU_PROPERTY_X86_ISA_1_V[234]. (_bfd_x86_elf_link_setup_gnu_properties): Generate GNU_PROPERTY_X86_ISA_1_V[234] for -z x86-64-v[234]. binutils/ PR gas/26703 * readelf.c (decode_x86_compat_2_isa): New function. (decode_x86_isa): Updated for new X86_ISA_1_XXX bits. (decode_x86_feature_1): Handle GNU_PROPERTY_X86_FEATURE_2_MASK. (print_gnu_property_note): Handle X86_COMPAT_2_ISA_1_USED, and X86_COMPAT_2_ISA_1_NEEDED. * testsuite/binutils-all/i386/pr21231b.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/binutils-all/x86-64/pr21231b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494a.s: Likewise. * testsuite/binutils-all/x86-64/pr23494b.s: Likewise. * testsuite/binutils-all/x86-64/pr23494c.s: Likewise. * testsuite/binutils-all/i386/empty.d: Updated. * testsuite/binutils-all/i386/ibt.d: Likewise. * testsuite/binutils-all/i386/pr21231a.d: Likewise. * testsuite/binutils-all/i386/pr21231b.d: Likewise. * testsuite/binutils-all/i386/shstk.d: Likewise. * testsuite/binutils-all/x86-64/empty-x32.d: Likewise. * testsuite/binutils-all/x86-64/empty.d: Likewise. * testsuite/binutils-all/x86-64/ibt-x32.d: Likewise. * testsuite/binutils-all/x86-64/ibt.d: Likewise. * testsuite/binutils-all/x86-64/pr21231a.d: Likewise. * testsuite/binutils-all/x86-64/pr21231b.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494a.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494c.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494d.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e-x32.d: Likewise. * testsuite/binutils-all/x86-64/pr23494e.d: Likewise. * testsuite/binutils-all/x86-64/shstk-x32.d: Likewise. * testsuite/binutils-all/x86-64/shstk.d: Likewise. gas/ PR gas/26703 * config/tc-i386.c (xstate): Add xstate_mask. (md_assemble): Check i.types[j], instead of i.tm.operand_types[j], for xstate. Set xstate_mask, instead of xstate_zmm, for RegMask. (output_insn): Update for GNU_PROPERTY_X86_ISA_1_V[234]. Update xstate for mask register and VSIB. * testsuite/gas/i386/i386.exp: Run more GNU_PROPERTY tests. * testsuite/gas/i386/property-1.s: Updated to the current GNU_PROPERTY_X86_ISA_1_USED value. * testsuite/gas/i386/property-2.s: Only keep cmove. * testsuite/gas/i386/property-3.s: Changed to addsubpd. * testsuite/gas/i386/property-1.d: Updated. * testsuite/gas/i386/property-2.d: Likewise. * testsuite/gas/i386/property-3.d: Likewise. * testsuite/gas/i386/property-4.d: Likewise. * testsuite/gas/i386/property-5.d: Likewise. * testsuite/gas/i386/property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-1.d: Likewise. * testsuite/gas/i386/x86-64-property-2.d: Likewise. * testsuite/gas/i386/x86-64-property-3.d: Likewise. * testsuite/gas/i386/x86-64-property-4.d: Likewise. * testsuite/gas/i386/x86-64-property-5.d: Likewise. * testsuite/gas/i386/x86-64-property-6.d: Likewise. * testsuite/gas/i386/x86-64-property-7.d: Likewise. * testsuite/gas/i386/x86-64-property-8.d: Likewise. * testsuite/gas/i386/x86-64-property-9.d: Likewise. * testsuite/gas/i386/property-11.d: New file. * testsuite/gas/i386/property-11.s: Likewise. * testsuite/gas/i386/property-12.d: Likewise. * testsuite/gas/i386/property-12.s: Likewise. * testsuite/gas/i386/property-13.d: Likewise. * testsuite/gas/i386/property-13.s: Likewise. * testsuite/gas/i386/x86-64-property-11.d: Likewise. * testsuite/gas/i386/x86-64-property-12.d: Likewise. * testsuite/gas/i386/x86-64-property-13.d: Likewise. * testsuite/gas/i386/x86-64-property-14.d: Likewise. * testsuite/gas/i386/x86-64-property-14.s: Likewise. include/ PR gas/26703 * elf/common.h (GNU_PROPERTY_X86_ISA_1_USED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_USED): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_NEEDED): This. (GNU_PROPERTY_X86_ISA_1_XXX): Renamed to ... (GNU_PROPERTY_X86_COMPAT_2_ISA_1_XXX): This. (GNU_PROPERTY_X86_ISA_1_NEEDED): New. (GNU_PROPERTY_X86_ISA_1_USED): Likewise. (GNU_PROPERTY_X86_ISA_1_V2): Likewise. (GNU_PROPERTY_X86_ISA_1_V3): Likewise. (GNU_PROPERTY_X86_ISA_1_V4): Likewise. (GNU_PROPERTY_X86_FEATURE_2_MASK): Likewise. ld/ PR gas/26703 * NEWS: Mention -z x86-64-v[234]. * ld.texi: Document -z x86-64-v[234]. * emulparams/elf32_x86_64.sh: Use x86-64-level.sh. * emulparams/elf_i386.sh: Likewise. * emulparams/elf_x86_64.sh: Likewise. * emulparams/x86-64-level.sh: New file. * testsuite/ld-elf/x86-feature-1a.rd: Update. * testsuite/ld-elf/x86-feature-1b.rd: Likewise. * testsuite/ld-elf/x86-feature-1c.rd: Likewise. * testsuite/ld-elf/x86-feature-1d.rd: Likewise. * testsuite/ld-elf/x86-feature-1e.rd: Likewise. * testsuite/ld-i386/pr23372c.d: Likewise. * testsuite/ld-i386/pr23486c.d: Likewise. * testsuite/ld-i386/pr23486d.d: Likewise. * testsuite/ld-i386/pr24322a.d: Likewise. * testsuite/ld-i386/pr24322b.d: Likewise. * testsuite/ld-i386/property-1a.r: Likewise. * testsuite/ld-i386/property-2a.r: Likewise. * testsuite/ld-i386/property-3.r: Likewise. * testsuite/ld-i386/property-3a.r: Likewise. * testsuite/ld-i386/property-4.r: Likewise. * testsuite/ld-i386/property-4a.r: Likewise. * testsuite/ld-i386/property-5.r: Likewise. * testsuite/ld-i386/property-5a.r: Likewise. * testsuite/ld-i386/property-7a.r: Likewise. * testsuite/ld-i386/property-x86-3.d: Likewise. * testsuite/ld-i386/property-x86-4a.d: Likewise. * testsuite/ld-i386/property-x86-5.d: Likewise. * testsuite/ld-i386/property-x86-cet1.d: Likewise. * testsuite/ld-i386/property-x86-cet2a.d: Likewise. * testsuite/ld-i386/property-x86-cet5a.d: Likewise. * testsuite/ld-i386/property-x86-cet5b.d: Likewise. * testsuite/ld-i386/property-x86-ibt1a.d: Likewise. * testsuite/ld-i386/property-x86-ibt1b.d: Likewise. * testsuite/ld-i386/property-x86-ibt2.d: Likewise. * testsuite/ld-i386/property-x86-ibt3a.d: Likewise. * testsuite/ld-i386/property-x86-ibt3b.d: Likewise. * testsuite/ld-i386/property-x86-ibt4.d: Likewise. * testsuite/ld-i386/property-x86-ibt5.d: Likewise. * testsuite/ld-i386/property-x86-shstk1a.d: Likewise. * testsuite/ld-i386/property-x86-shstk1b.d: Likewise. * testsuite/ld-i386/property-x86-shstk2.d: Likewise. * testsuite/ld-i386/property-x86-shstk3a.d: Likewise. * testsuite/ld-i386/property-x86-shstk3b.d: Likewise. * testsuite/ld-i386/property-x86-shstk4.d: Likewise. * testsuite/ld-i386/property-x86-shstk5.d: Likewise. * testsuite/ld-x86-64/pr23372c-x32.d: Likewise. * testsuite/ld-x86-64/pr23372c.d: Likewise. * testsuite/ld-x86-64/pr23486c.d: Likewise. * testsuite/ld-x86-64/pr23486d-x32.d: Likewise. * testsuite/ld-x86-64/pr23486d.d: Likewise. * testsuite/ld-x86-64/pr24322a-x32.d: Likewise. * testsuite/ld-x86-64/pr24322a.d: Likewise. * testsuite/ld-x86-64/pr24322b-x32.d: Likewise. * testsuite/ld-x86-64/pr24322b.d: Likewise. * testsuite/ld-x86-64/pr24458a-x32.d: Likewise. * testsuite/ld-x86-64/pr24458a.d: Likewise. * testsuite/ld-x86-64/pr24458b-x32.d: Likewise. * testsuite/ld-x86-64/pr24458b.d: Likewise. * testsuite/ld-x86-64/pr24458c-x32.d: Likewise. * testsuite/ld-x86-64/pr24458c.d: Likewise. * testsuite/ld-x86-64/property-1a.r: Likewise. * testsuite/ld-x86-64/property-2a.r: Likewise. * testsuite/ld-x86-64/property-3.r: Likewise. * testsuite/ld-x86-64/property-3a.r: Likewise. * testsuite/ld-x86-64/property-4.r: Likewise. * testsuite/ld-x86-64/property-4a.r: Likewise. * testsuite/ld-x86-64/property-5.r: Likewise. * testsuite/ld-x86-64/property-5a.r: Likewise. * testsuite/ld-x86-64/property-7a.r: Likewise. * testsuite/ld-x86-64/property-x86-3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-3.d: Likewise. * testsuite/ld-x86-64/property-x86-4a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-4a.d: Likewise. * testsuite/ld-x86-64/property-x86-5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-5.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet1.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet2a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5a.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-cet5b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt1b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt2.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3a.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt3b.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt4.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-ibt5.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk1b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk2.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3a.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk3b.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk4.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-shstk5.d: Likewise. * testsuite/ld-i386/i386.exp: Run property-x86-6, property-x86-isa1, property-x86-isa2 and property-x86-isa3. * testsuite/ld-i386/property-x86-1.S: Updated to the current GNU_PROPERTY_X86_ISA_1_USED and GNU_PROPERTY_X86_ISA_1_NEEDED values. * testsuite/ld-i386/property-x86-2.S: Likewise. * testsuite/ld-i386/property-x86-3.s: Likewise. * testsuite/ld-x86-64/pr23372d.s: Likewise. * testsuite/ld-x86-64/pr23372e.s: Likewise. * testsuite/ld-x86-64/pr23372f.s: Likewise. * testsuite/ld-x86-64/pr23486c.s: Likewise. * testsuite/ld-x86-64/pr23486d.s: Likewise. * testsuite/ld-x86-64/property-x86-1.S: Likewise. * testsuite/ld-x86-64/property-x86-2.S: Likewise. * testsuite/ld-x86-64/property-x86-3.s: Likewise. * testsuite/ld-x86-64/property-x86-5a.s: Likewise. * testsuite/ld-x86-64/property-x86-5b.s: Likewise. * testsuite/ld-i386/property-x86-6.d: New file. * testsuite/ld-i386/property-x86-isa1.d: Likewise. * testsuite/ld-i386/property-x86-isa2.d: Likewise. * testsuite/ld-i386/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/property-x86-6-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-6.d: Likewise. * testsuite/ld-x86-64/property-x86-6.s: Likewise. * testsuite/ld-x86-64/property-x86-isa1-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.d: Likewise. * testsuite/ld-x86-64/property-x86-isa1.s: Likewise. * testsuite/ld-x86-64/property-x86-isa2-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa2.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3-x32.d: Likewise. * testsuite/ld-x86-64/property-x86-isa3.d: Likewise. * testsuite/ld-x86-64/simple.s: Likewise. * ld/testsuite/ld-x86-64/x86-64.exp: Run property-x86-6, property-x86-6-x32, property-x86-isa1, property-x86-isa1-x32, property-x86-isa2, property-x86-isa2-x32, property-x86-isa3-x32 and property-x86-isa3.	6 years ago
Mark Wielaard	d7b477c541	Sync libiberty and include with GCC for get_DW_UT_name. This adds a get_DW_UT_name function to dwarfnames using dwarf2.def for use in binutils readelf to show the unit types in a DWARF5 header. include/ChangeLog: Sync with GCC * dwarf2.def: Add DWARF5 Unit type header encoding macros DW_UT_FIRST, DW_UT and DW_UT_END. * dwarf2.h (enum dwarf_unit_type): Removed and define using DW_UT_FIRST, DW_UT and DW_UT_END macros. (get_DW_UT_name): New function declaration. libiberty/ChangeLog: Sync with GCC * dwarfnames.c (get_DW_UT_name): Define using DW_UT_FIRST, DW_UT and DW_UT_END.	6 years ago
H.J. Lu	496afd1705	elf: Add -z unique-symbol to avoid duplicated local symbol names The symbol string table in the .symtab section is optional and cosmetic. The contents of the .symtab section have no impact on run-time execution. The symbol names in the symbol string table help distinguish addresses at different locations. Add a linker option, -z unique-symbol, to avoid duplicated local symbol names in the symbol string table. This feature was well received by the livepatch maintainers. It not only solves the duplicated local symbol name problem, but also would allow livepatch to more precisely locate duplicate symbols in general for patching. bfd/ PR ld/26391 * elflink.c (elf_final_link_info): Add local_hash_table. (local_hash_entry): New. (local_hash_newfunc): Likewise. (elf_link_output_symstrtab): Append ".COUNT" to duplicated local symbols. (bfd_elf_final_link): Initialize and free local_hash_table for "-z unique-symbol". include/ PR ld/26391 * bfdlink.h (bfd_link_info): Add unique_symbol. ld/ PR ld/26391 * NEWS: Mention "-z unique-symbol". * emultempl/elf.em (gld${EMULATION_NAME}_handle_option): Handle "-z unique-symbol" and "-z nounique-symbol". * ld.texi: Document "-z unique-symbol" and "-z nounique-symbol". * lexsup.c (elf_static_list_options): Add "-z unique-symbol" and "-z nounique-symbol". * testsuite/ld-elf/elf.exp: Add PR ld/26391 tests. * testsuite/ld-elf/pr26391.nd: New file. * testsuite/ld-elf/pr26391.out: Likewise. * testsuite/ld-elf/pr26391a.c: Likewise. * testsuite/ld-elf/pr26391b.c: Likewise. * testsuite/ld-elf/pr26391c.c: Likewise. * testsuite/ld-elf/pr26391d.c: Likewise.	6 years ago
Felix Willgerodt	dae7c5a444	Sync include, libiberty with GCC. include: 2020-09-10 Felix Willgerodt <felix.willgerodt@intel.com> Sync with GCC 2020-08-17 Felix Willgerodt <felix.willgerodt@intel.com> * floatformat.h (floatformat_bfloat16_big): New. (floatformat_bfloat16_little): New. libiberty: 2020-09-10 Felix Willgerodt <felix.willgerodt@intel.com> Sync with GCC 2020-08-17 Felix Willgerodt <felix.willgerodt@intel.com> * floatformat.c (floatformat_bfloat16_big): New. (floatformat_bfloat16_little): New.	6 years ago
Cooper Qu	548f527578	CSKY: Change ISA flag's type to bfd_uint64_t and fix build error. The previous patch missed one modification. Following is the error message: gas/config/tc-csky.c:806:5: error: 'CSKY_ARCH_804' undeclared here (not in a function); did you mean 'CSKY_ARCH_807'? include/ * opcode/csky.h (CSKYV1_ISA_E1): Convert to bfd_uint64_t type. (CSKYV2_ISA_E1): Likewise. (CSKYV2_ISA_1E2): Likewise. (CSKYV2_ISA_2E3): Likewise. (CSKYV2_ISA_3E7): Likewise. (CSKYV2_ISA_7E10): Likewise. (CSKYV2_ISA_3E3R1): Likewise. (CSKYV2_ISA_3E3R2): Likewise. (CSKYV2_ISA_10E60): Likewise. (CSKYV2_ISA_3E3R3): Likewise. (CSKY_ISA_TRUST): Likewise. (CSKY_ISA_CACHE): Likewise. (CSKY_ISA_NVIC): Likewise. (CSKY_ISA_CP): Likewise. (CSKY_ISA_MP): Likewise. (CSKY_ISA_MP_1E2): Likewise. (CSKY_ISA_JAVA): Likewise. (CSKY_ISA_MAC): Likewise. (CSKY_ISA_MAC_DSP): Likewise. (CSKY_ISA_DSP): Likewise. (CSKY_ISA_DSP_1E2): Likewise. (CSKY_ISA_DSP_ENHANCE): Likewise. (CSKY_ISA_DSPE60): Likewise. (CSKY_ISA_FLOAT_E1): Likewise. (CSKY_ISA_FLOAT_1E2): Likewise. (CSKY_ISA_FLOAT_1E3): Likewise. (CSKY_ISA_FLOAT_3E4): Likewise. (CSKY_ISA_FLOAT_7E60): Likewise. (CSKY_ISA_VDSP): Likewise. (CSKY_ISA_VDSP_2): Likewise. (CSKY_ARCH_804): Define. (CSKY_ARCH_805): Define. (CSKY_ARCH_800): Define.	6 years ago
H.J. Lu	8d58ed37f1	x86: Add NT_X86_CET note Define NT_X86_CET which is the proposed note for x86 CET state to support Intel CET in Linux kernel. Double check it after Intel CET patches have been merged into Linux kernel. binutils/ * readelf.c (get_note_type): Support NT_X86_CET. include/ * elf/common.h (NT_X86_CET): New.	6 years ago
Cooper Qu	525a0aa301	CSKY: Add new arches while refine the cpu option process. Add arches CK804, CK805 and CK800. CK800 is an special arch which support all instructions for CSKYV2. Refine the cpu tables to simplify adding a new cpu. Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com> gas/ * config/tc-csky.c (struct csky_cpu_info): Add new members isa_flag, features and ver. (struct csky_cpu_feature): New. (struct csky_cpu_version): New. (CSKY_FEATURE_MAX): Define. (CSKY_CPU_REVERISON_MAX): Define. (FEATURE_DSP_EXT, FEATURE_DSP, FEATURE_MMU, FEATURE_VDSP, FEATURE_FLOAT, FEATURE_TRUST, FEATURE_JAVA, FEATURE_SHIELD): Define, each standard one collection of instructions. (CSKY_FEATURES_DEF_NULL, CSKY_FEATURES_DEF_e, CSKY_FEATURES_DEF_t, CSKY_FEATURES_DEF_f, CSKY_FEATURES_DEF_v, CSKY_FEATURES_DEF_ef, CSKY_FEATURES_DEF_jt, CSKY_FEATURES_DEF_efht, CSKY_FEATURES_DEF_efv, CSKY_FEATURES_DEF_eft, CSKY_FEATURES_DEF_d, CSKY_FEATURES_DEF_df, CSKY_FEATURES_DEF_ft, CSKY_FEATURES_DEF_tv, CSKY_FEATURES_DEF_fv, CSKY_FEATURES_DEF_dft, CSKY_FEATURES_DEF_dfv, CSKY_FEATURES_DEF_ftv, CSKY_FEATURES_DEF_eftv): Define, the features combination used by cpu. (CSKY_CPU_REVERISON_r0p0, CSKY_CPU_REVERISON_r1p0, CSKY_CPU_REVERISON_r2p0, CSKY_CPU_REVERISON_r3p0, CSKY_CPU_REVERISON_RESERVED, CSKY_CPU_REVERISON_R3): Define, version information used by cpu. (csky_cpus): Refine, and add CK804, CK805 and CK800. (parse_cpu): Refine. (parse_arch): Refine. (md_show_usage): Refine. (md_begin): Refine. include/ * opcode/csky.h (CSKY_ARCH_804): Define. (CSKY_ARCH_805): Define. (CSKY_ARCH_800): Define.	6 years ago
Nick Clifton	0332f66274	Fix compile time warnings when building for the CSKY target on a 32-bit host. incldue * opcode/csky.h (CSKY_ISA_FLOAT_7E60): Use a long long type for this value. opcodes * csky-dis.c (csky_output_operand): Coerce the immediate values to long before printing.	6 years ago
Cooper Qu	6a1ed9106f	CSKY: Change mvtc and mulsw's ISA flag. gas/ * config/tc-csky.c (CSKYV2_ISA_DSP): CSKY_ISA_DSPE60. (CSKY_ISA_860): Likewise. include/ * opcode/csky.h (CSKY_ISA_DSPE60): Define. opcodes/ * csky-opc.h (csky_v2_opcodes): Change mvtc and mulsw's ISA flag.	6 years ago
Cooper Qu	1feede9b38	CSKY: Add FPUV3 instructions, which supported by ck860f. Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com> gas/ * config/tc-csky.c (float_work_fpuv3_fmovi): New function, helper function to encode fpuv3 fmovi instructions. (float_work_fpuv3_fstore): New function. (struct literal): Add new member 'offset'. (csky_cpus): New cpu CK860f. (enter_literal): Return literal pool pointer instead of offset. (parse_rt): Adjust the change of enter_literal. (parse_rtf): Likewise. (v1_work_lrw): Likewise. (v1_work_jbsr): Likewise. (v2_work_lrw): Likewise. (v2_work_jbsr): Likewise. (v2_work_jsri): Likewise. (vdsp_work_vlrw): Likewise. (is_freglist_legal): Add handler for FPUV3. (parse_type_freg): Likewise. (is_imm_within_range): Set e.X_add_number if it is a signed and negtive number. (get_operand_value): Add handler for OPRND_TYPE_IMM9b, OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. (float_to_half): Convert float number to harf float. opcodes/ * csky-dis.c (csky_output_operand): Add handlers for OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. Refine OPRND_TYPE_FREGLIST_DASH to support FPUV3 instructions. * csky-opc.h (enum operand_type): New enum OPRND_TYPE_IMM9b, OPRND_TYPE_HFLOAT_FMOVI, OPRND_TYPE_SFLOAT_FMOVI and OPRND_TYPE_DFLOAT_FMOVI. (OPRND_MASK_4_5, OPRND_MASK_6, OPRND_MASK_6_7, OPRND_MASK_6_8, OPRND_MASK_7, OPRND_MASK_7_8, OPRND_MASK_17_24, OPRND_MASK_20, OPRND_MASK_20_21, OPRND_MASK_20_22, OPRND_MASK_20_23, OPRND_MASK_20_24, OPRND_MASK_20_25, OPRND_MASK_0_3or5_8, OPRND_MASK_0_3or6_7, OPRND_MASK_0_3or25, OPRND_MASK_0_4or21_24, OPRND_MASK_5or20_21, OPRND_MASK_5or20_22, OPRND_MASK_5or20_23, OPRND_MASK_5or20_24, OPRND_MASK_5or20_25, OPRND_MASK_8_9or21_25, OPRND_MASK_8_9or16_25, OPRND_MASK_4_6or20, OPRND_MASK_5_7or20, OPRND_MASK_4_5or20or25, OPRND_MASK_4_6or20or25, OPRND_MASK_4_7or20or25, OPRND_MASK_6_9or17_24, OPRND_MASK_6_7or20, OPRND_MASK_6or20, OPRND_MASK_7or20, OPRND_MASK_5or8_9or16_25, OPRND_MASK_5or8_9or20_25): Define. (csky_v2_opcodes): Add FPUV3 instructions. include/ * opcode/csky.h (CSKY_ISA_FLOAT_7E60): Define.	6 years ago
Jozef Lawrynowicz	7d81bc937c	MSP430: Support relocations for subtract expressions in .uleb128 directives Link-time relaxations of branches are common for MSP430, given that GCC can generate pessimal branch instructions, and the -mcode-region=either/-mdata-region=either options to shuffle sections can further change the type of branch instruction required. These relaxations can result in invalid code when .uleb128 directives, used in the .gcc_except_table section, are used to calculate the distance between two labels. A value for the .uleb128 directive is calculated at assembly-time, and can't be updated at link-time, even if relaxation causes the distance between the labels to change. This patch adds relocations for subtract expressions in .uleb128 directives, to allow the linker to re-calculate the value of these expressions after relaxation has been performed. bfd/ChangeLog: * bfd-in2.h (bfd_reloc_code_real): Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * elf32-msp430.c (msp430_elf_ignore_reloc): New. (elf_msp430_howto_table): Add R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. (msp430_reloc_map): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (msp430x_reloc_map): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. (write_uleb128): New. (msp430_final_link_relocate): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. * libbfd.c (_bfd_write_unsigned_leb128): New. * libbfd.h (_bfd_write_unsigned_leb128): New prototype. Add BFD_RELOC_MSP430_{SET,SUB}_ULEB128. * reloc.c: Document BFD_RELOC_MSP430_{SET,SUB}_ULEB128. binutils/ChangeLog: * readelf.c (target_specific_reloc_handling): Handle R_MSP430{,X}_GNU_{SET,SUB}_ULEB128. gas/ChangeLog: * config/tc-msp430.c (msp430_insert_uleb128_fixes): New. (msp430_md_end): Call msp430_insert_uleb128_fixes. include/ChangeLog: * elf/msp430.h (elf_msp430_reloc_type): Add R_MSP430_GNU_{SET,SUB}_ULEB128. (elf_msp430x_reloc_type): Add R_MSP430X_GNU_{SET,SUB}_ULEB128. ld/ChangeLog: * testsuite/ld-msp430-elf/msp430-elf.exp: Run new tests. * testsuite/ld-msp430-elf/uleb128.s: New test. * testsuite/ld-msp430-elf/uleb128_430.d: New test. * testsuite/ld-msp430-elf/uleb128_430x.d: New test.	6 years ago
Alex Coplan	38cf07a6c0	aarch64: Add support for Armv8-R system registers This patch adds support for the system registers introduced in Armv8-R AArch64. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (parse_sys_reg): Also pass sysreg name to validation function. (parse_sys_ins_reg): Likewise. (print_operands): Pass CPU features to aarch64_print_operand(). * testsuite/gas/aarch64/v8-r-bad-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-bad-sysregs.l: Error output. * testsuite/gas/aarch64/v8-r-bad-sysregs.s: Input. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.d: New test. * testsuite/gas/aarch64/v8-r-sysregs-need-arch.l: Error output. * testsuite/gas/aarch64/v8-r-sysregs.d: New test. * testsuite/gas/aarch64/v8-r-sysregs.s: Input for previous two tests. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (aarch64_sys_ins_reg_supported_p): Also take system register name in order to simplify validation for v8-R. (aarch64_print_operand): Also take CPU feature set, as disassembly for system registers now depends on arch variant. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (print_operands): Pass CPU features to aarch64_print_operand(). * aarch64-opc.c (aarch64_print_operand): Use CPU features to determine preferred disassembly of system registers. (SR_RNG): Refactor to use new SR_FEAT2 macro. (SR_FEAT2): New. (SR_V8_1_A): New. (SR_V8_4_A): New. (SR_V8_A): New. (SR_V8_R): New. (SR_EXPAND_ELx): New. (SR_EXPAND_EL12): New. (aarch64_sys_regs): Specify which registers are only on A-profile, add R-profile system registers. (ENC_BARLAR): New. (PRBARn_ELx): New. (PRLARn_ELx): New. (aarch64_sys_ins_reg_supported_p): Reject EL3 registers for Armv8-R AArch64.	6 years ago
Alex Coplan	95830c988a	aarch64: Add base support for Armv8-R This patch adds the basic infrastructure needed to support Armv8-R in AArch64 binutils: new command-line flags, new feature bits, a new BFD architecture, and support for differentiating between architecture variants in the disassembler. The new command-line options added by this patch are -march=armv8-r in GAS and -m aarch64:armv8-r in objdump. The disassembler support is necessary since Armv8-R AArch64 introduces a system register (VSCTLR_EL2) which shares an encoding with a different system register (TTBR0_EL2) in Armv8-A. This also allows us to use the correct preferred disassembly for the new DFB alias introduced in Armv8-R. bfd/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * archures.c (bfd_mach_aarch64_8R): New. * bfd-in2.h: Regenerate. * cpu-aarch64.c (bfd_aarch64_arch_v8_r): New. (bfd_aarch64_arch_ilp32): Update tail pointer. gas/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_archs): Add armv8-r. * doc/c-aarch64.texi: Document -march=armv8-r. include/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * opcode/aarch64.h (AARCH64_FEATURE_V8_A): New. (AARCH64_FEATURE_V8_R): New. (AARCH64_ARCH_V8): Include new A-profile feature bit. (AARCH64_ARCH_V8_R): New. opcodes/ChangeLog: 2020-09-08 Alex Coplan <alex.coplan@arm.com> * aarch64-dis.c (arch_variant): New. (determine_disassembling_preference): Disassemble according to arch variant. (select_aarch64_variant): New. (print_insn_aarch64): Set feature set.	6 years ago
Alan Modra	7c80dd4c2c	ubsan: v850-opc.c:412 left shift cannot be represented include/ * opcode/v850.h (struct v850_operand <insert>): Make param op an unsigned long. opcodes/ * v850-opc.c (insert_i5div1, insert_i5div2, insert_i5div3), (insert_d5_4, insert_d8_6, insert_d8_7, insert_v8, insert_d9), (insert_u16_loop, insert_d16_15, insert_d16_16, insert_d17_16), (insert_d22, insert_d23, insert_d23_align1, insert_i9, insert_u9), (insert_spe, insert_r4, insert_POS, insert_WIDTH, insert_SELID), (insert_VECTOR8, insert_VECTOR5, insert_CACHEOP, insert_PREFOP), (nsert_IMM10U, insert_SRSEL1, insert_SRSEL2): Use unsigned long for value parameter and update code to suit. (extract_d9, extract_d16_15, extract_d16_16, extract_d17_16), (extract_d22, extract_d23, extract_i9): Use unsigned long variables.	6 years ago
Cooper Qu	4211a34001	CSKY: Add CPU CK803r3. Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set, which is enabled by ck803r3, and it's still a part of enhance DSP instruction set. gas/ * config/tc-csky.c (csky_cpus): Add ck803r3. (CSKY_ISA_803R3): Define. (CSKY_ISA_803R2): Refine, use CSKY_ISA_803R1. include/ * opcode/csky.h (CSKYV2_ISA_3E3R3): Define. opcodes/ * csky-opc.h (csky_v2_opcodes): Move divul and divsl to CSKYV2_ISA_3E3R3 instruction set.	6 years ago
Alan Modra	1174d92070	PR26493 UBSAN: elfnn-riscv.c left shift of negative value include/ PR 26493 * opcode/riscv.h (OP_MASK_CSR, OP_MASK_CUSTOM_IMM) (OP_MASK_FUNCT7, OP_MASK_RS3): Make unsigned. bfd/ PR 26493 * elfnn-riscv.c (riscv_make_plt_header): Cast PLT_HEADER_SIZE to unsigned when using with RISCV_ITYPE. (_bfd_riscv_relax_call): Use an unsigned foff.	6 years ago
Alan Modra	a148a448ec	PR26457 UBSAN: som.c:1794 left shift cannot be represented PR 26457 * som/aout.h (SOM_SUBSPACE_ACCESS_CONTROL_BITS_MASK): Make unsigned. (SOM_SUBSPACE_MEMORY_RESIDENT, SOM_SUBSPACE_DUP_COMMON) (SOM_SUBSPACE_IS_COMMON, SOM_SUBSPACE_IS_LOADABLE) (SOM_SUBSPACE_QUADRANT_MASK, SOM_SUBSPACE_INITIALLY_FROZEN) (SOM_SUBSPACE_IS_FIRST, SOM_SUBSPACE_CODE_ONLY) (SOM_SUBSPACE_SORT_KEY_MASK, SOM_SUBSPACE_REPLICATE_INIT) (SOM_SUBSPACE_CONTINUATION, SOM_SUBSPACE_IS_TSPECIFIC) (SOM_SUBSPACE_IS_COMDAT): Likewise.	6 years ago

1 Commits (299b91cd85540b4bfa94124364572f6a51b816fe)