binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Andre Vieira	514bbb0fd9	[PATCH, binutils, Arm] Add Armv8.1-M Mainline and MVE enablement to NEWS gas/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * NEWS: Mention Armv8.1-M Mainline and MVE. binutils/ChangeLog: 2019-05-16 Andre Vieira <andre.simoesdiasvieira@arm.com> * NEWS: Mention Armv8.1-M Mainline and MVE.	7 years ago
Jamey Hicks	37d0d09177	Add new option to objcopy: --verilog-data-width. Use this option to set the size of byte bundles generated in verilog format files. PR 19921 binutils* objcopy.c: Add new option --verilog-data-width. Use it to set the value of VerilogDataWidth. * doc/binutils.texi: Document the new option. * testsuite/binutils-all/objcopy.exp: Run tests of new option. * testsuite/binutils-all/verilog-1.hex: New file. * testsuite/binutils-all/verilog-2.hex: New file. * testsuite/binutils-all/verilog-4.hex: New file. * testsuite/binutils-all/verilog-8.hex: New file. * NEWS: Mention the new feature. bfd * verilog.c: (VerilogDataWidth): New variable. (verilog_write_record): Emit bytes in VerilogDataWidth bundles.	7 years ago
Nick Clifton	39f0547e55	Extend objdump's --dwarf=follow-links option so that separate debug info files will also be affected by other dump function, and symbol tables from separate debug info files will be used when disassembling the main file. * objdump.c (sym_ok): New function. (find_symbol_for_address): Use new function. (disassemble_section): Compare sections by name, not pointer. (dump_dwarf): Move code to initialise byte_get pointer and iterate over separate debug files from here to ... (dump_bfd): ... here. Add parameter indicating that a separate debug info file is being dumped. For main file, pull in the symbol tables from all separate debug info files. (display_object): Update call to dump_bfd. * doc/binutils.texi: Document extened behaviour of the --dwarf=follow-links option. * NEWS: Mention this new feature. * testsuite/binutils-all/objdump.WK2: Update expected output. * testsuite/binutils-all/objdump.exp (test_follow_debuglink): Add options and dump file parameters. Add extra test. * testsuite/binutils-all/objdump.WK3: New file. * testsuite/binutils-all/readelf.exp: Change expected output for readelf -wKis test. * testsuite/binutils-all/readelf.wKis: New file.	7 years ago
Nick Clifton	24841daa74	Extend readelf and objdump so that they will display and follow multiple links to separate debug information files. PR 23843 * dwarf.h (struct separate_info): New structure for containing information on separate debug info files. * dwarf.c (struct dwo_info): New structure for containing dwo links. (first_dwo_info): Chain of dwo_info structures. (first_separate_file): Chain of separate_info structures. (separate_debug_file, separate_debug_filename): Delete. (fetch_alt_indirect_string): Scan all separate debug info files for the requested string. (add_dwo_info): New function. (add_dwo_name): New function. (add_dwo_dir): New function. (add_dwo_id: New function. (free_dwo_info): New function. (read_and_display_attr_value): Store DWO data using the new functions. (load_debug_section_with_follow): If necessary, scan the list of separate debug info files for the requested section. (add_separate_debug_file): New function. (load_separate_debug_info): Call add_separate_debug_file to store the information on the newly loaded file. (load_dwo_file): Likewise. (load_separate_debif_file): Rename to load_separate_debug_files. Change return type to boolean. If following links then attempt to load all separate debug info files, not just the first one. (free_debug_memory): Release memory in dwo_info and separate_info chains. * objdump.c (dump_dwarf): Iterate over all loaded debg info files. * readelf.c (process_object): Likewise. * doc/debug.options.texi: Update descriptions of links and follow-links options. * testsuite/binutils-all/objdump.WK2: Update expected output. * testsuite/binutils-all/readelf.k2: Likewise. * NEWS: Announce the new feature.	7 years ago
Andrew Burgess	46cbf38dc3	binutils: Add new GNU format mode to `size` utility The size tool currently defaults to berkeley format output. However, this output format has a weird quirk, read-only data is counted against the text sections, not the data sections. The code offers no real explanation for why this is, but I'm reluctant to change it for two reasons, first, I'm assuming it probably makes sense in some case that I'm not thinking of (maybe a target where sections are not marked executable, and so there's no distinction between read-only data and code), and second, the code has been this way for at least 20 years, I worry that changing things now might cause more confusion than it solves. This commit then introduces a new output format for the size tool, this new format displays the results in a similar manor to the berkeley format, but counts read-only data in the data column, and only executable sections are counted in the text column. Given that this is a brand new output format I've gone ahead and simplified things a little, while the berkeley format displays the total twice, once in decimal and once in hex, the new display format just displays the total in decimal. Of course, there's still the '--radix' option which can be used to display all the results in hexadecimal or octal. I've called the new format 'gnu', so '--format=gnu' or '-G' are used to access it. binutils/ChangeLog: * size.c (berkeley_format): Delete. (enum output_format): New enum. (selected_output_format): New variable. (usage): Update to mention GNU format. (main): Update to extract options, and select format as needed. Handle GNU format where needed. (berkeley_sum): Renamed to... (berkeley_or_gnu_sum): ...this, and updated to handle both formats. (berkeley_format): Renamed to... (berkeley_or_gnu_format): ...this, and updated to handle both formats. (print_sizes): Handle GNU format. * doc/binutils.texi (size): Document new GNU format. * testsuite/binutils-all/size.exp: Add test of extended functionality. * NEWS: Mention new functionality.	7 years ago
Nick Clifton	f974f26cb1	Add markers for 2.32 branch to NEWS and ChangeLog files.	7 years ago
Nick Clifton	baae986a40	Update objdump's --disassemble=<symbol> feature so that if <symbol> is a function, the entire function will be disassembled, regardless of the presence of interveening symbols. * objdump.c (disassemble_section): When disassembling from a symbol only stop at the next symbol if the original symbol was not a function symbol. Otherwise continue disassembling until a new function is reached. * testsuite/binutils-all/objdump.exp: Add tests of extended functionality. * testsuite/binutils-all/disasm.s: New test source file.	7 years ago
Alan Modra	827041555a	Update year range in copyright notice of binutils files	7 years ago
Nick Clifton	69799d67e8	Fix a failure in the libiberty testsuite by increasing the recursion limit to 2048. PR 88409 include * demangle.h (DEMANGLE_RECURSION_LIMIT): Increase to 2048. binutils* NEWS: Note that recursion limit has increased to 2048. * doc/binutils.texi: Likewise.	7 years ago
Nick Clifton	af03af8f55	Synchronize libiberty with gcc and add --no-recruse-limit option to tools that support name demangling. This patch addresses the multitude of bug reports about resource exhaustion in libiberty's name demangling code. It adds a limit to the amount of recursion that is allowed, before an error is triggered. It also adds a new demangling option to disable this limit. (The limit is enabled by default). PR 87681 PR 87675 PR 87636 PR 87335 libiberty * cp-demangle.h (struct d_info): Add recursion_limit field. * cp-demangle.c (d_function_type): If the recursion limit is enabled and reached, return with a failure result. (d_demangle_callback): If the recursion limit is enabled, check for a mangled string that is so long that there is not enough stack space for the local arrays. * cplus-dem.c (struct work): Add recursion_level field. (demangle_nested_args): If the recursion limit is enabled and reached, return with a failure result. include * demangle.h (DMGL_RECURSE_LIMIT): Define. (DEMANGLE_RECURSION_LIMIT): Prototype. binutuils * addr2line.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (translate_address): Pass demangle_flags to bfd_demangle. (main): Handle --recurse-limit and --no-recurse-limit options. * cxxfilt.c (flags): Add DMGL_RECURSE_LIMIT. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * dlltool.c (gen_def_file): Include DMGL_RECURSE_LIMIT in flags passed to cplus_demangle. * nm.c (demangle_flags): New static variable. (long_options): Add --recurse-limit and --no-recurse-limit. (main): Handle new options. * objdump.c (demangle_flags): New static variable. (usage): Add --recurse-limit and --no-recurse-limit. (long_options): Likewise. (objdump_print_symname): Pass demangle_flags to bfd_demangle. (disassemble_section): Likewise. (dump_dymbols): Likewise. (main): Handle new options. * prdbg.c (demangle_flags): New static variable. (tg_variable): Pass demangle_flags to demangler. (tg_start_function): Likewise. * stabs.c (demangle_flags): New static variable. (stab_demangle_template): Pass demangle_flags to demangler. (stab_demangle_v3_argtypes): Likewise. (stab_demangle_v3_arg): Likewise. * doc/binutuls.texi: Document new command line options. * NEWS: Mention the new feature. * testsuite/config/default.exp (CXXFILT): Define if not already defined. (CXXFILTFLAGS): Likewise. * testsuite/binutils-all/cxxfilt.exp: New file. Runs a few simple tests of the cxxfilt program.	7 years ago
Masatake Yamato	d3def5d73e	Enhance objdump's --disassemble switch so that it can now take an optional parameter, specifying the starting symbol for disassembly. Disassembly will continue from this symbol up to the next symbol. * objdump.c (long_options): Have the --disassemble option take an optional argument. (usage): Add description for the `symbol' argument to the --disassemble option. (disasm_sym): New file private variable. (struct objdump_disasm_info): New field `symbol'. (disassemble_section): Introduce `do_print' local variable to control whether objdump displays the result of disassembling for a symbol or not. (main): Set `symbol' file private variable if the option argument for the --disassemble option is given. * doc/binutils.texi (objdump): Add description for the option argument. * NEWS: Mention the new feature. * testsuite/binutils-all/objdump.exp: Add tests of the -d and --disassemble=<symbol> options. * testsuite/binutils-all/bintest.s: Add more symbols and code. * testsuite/binutils-all/readelf.s: Update expected output. * testsuite/binutils-all/readelf.ss-64: Likewise. * testsuite/binutils-all/readelf.ss-mips: Likewise. * testsuite/binutils-all/readelf.ss-tmips: Likewise.	8 years ago
Chenghua Xu	9108bc33b1	[MIPS] Add Loongson 2K1000 proccessor support. bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs264e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS264E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs264e to bfd_mach_mips_gs464e extension. binutils/ * NEWS: Mention Loongson 2K1000 proccessor support. * readelf.c (get_machine_flags): Handle gs264e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS264E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS264E. (mips_cpu_info_table): Add gs264e descriptors. * doc/as.texi (march table): Add gs264e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS264E. * opcode/mips.h (CPU_XXX): New CPU_GS264E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs264e and gs464e. opcodes/ * mips-dis.c (mips_arch_choices): Add gs264e descriptors.	8 years ago
Chenghua Xu	bd782c07b9	[MIPS] Add Loongson 3A2000/3A3000 proccessor support. bfd/ * archures.c (bfd_architecture): New machine bfd_mach_mips_gs464e. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Handle E_MIPS_MACH_GS464E. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Map bfd_mach_mips_gs464e to bfd_mach_mips_gs464 extension. binutils/ * NEWS: Mention Loongson 3A2000/3A3000 proccessor support. * readelf.c (get_machine_flags): Handle gs464e. elfcpp/ * mips.c (EF_MIPS_MACH): New E_MIPS_MACH_GS464E. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Exclude CPU_GS464E. (mips_cpu_info_table): Add gs464e descriptors. * doc/as.texi (march table): Add gs464e. include/ * elf/mips.h (E_MIPS_MACH_XXX): New E_MIPS_MACH_GS464E. * opcode/mips.h (CPU_XXX): New CPU_GS464E. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Run good_combination gs464e and gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464e descriptors.	8 years ago
Chenghua Xu	ac8cb70f36	[MIPS] Add Loongson 3A1000 proccessor support. bfd/ * archures.c (bfd_architecture): Rename bfd_mach_mips_loongson_3a to bfd_mach_mips_gs464. * bfd-in2.h (bfd_architecture): Likewise. * cpu-mips.c (enum I_xxx): Likewise. (arch_info_struct): Likewise. * elfxx-mips.c (_bfd_elf_mips_mach): Likewise. (mips_set_isa_flags): Likewise. (mips_mach_extensions): Likewise. (bfd_mips_isa_ext_mach): Likewise. (bfd_mips_isa_ext): Likewise. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. binutils/ * NEWS: Mention Loongson 3A1000 proccessor support. * readelf.c (get_machine_flags): Rename loongson-3a to gs464. (print_mips_isa_ext): Delete AFL_EXT_LOONGSON_3A. elfcpp/ * mips.c (EF_MIPS_MACH): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. gas/ * config/tc-mips.c (ISA_HAS_ODD_SINGLE_FPR): Rename CPU_LOONGSON_3A to CPU_GS464. (mips_cpu_info_table): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * doc/as.texi (march table): Rename loongson3a to gs464. * testsuite/gas/mips/loongson-3a-mmi.d: Set "ISA Extension" flag to None. gold/ * mips.cc (Mips_mach, add_machine_extensions, elf_mips_mach): Rename loongson3a to gs464. (mips_isa_ext_mach, mips_isa_ext): Delete loongson3a. (infer_abiflags): Use ases instead of isa_ext for infer ABI flags. (elf_mips_mach_name): Rename loongson3a to gs464. include/ * elf/mips.h (E_MIPS_MACH_XXX): Rename E_MIPS_MACH_LS3A to E_MIPS_MACH_GS464. (AFL_EXT_XXX): Delete AFL_EXT_LOONGSON_3A. * opcode/mips.h (INSN_XXX): Delete INSN_LOONGSON_3A. (CPU_XXX): Rename CPU_LOONGSON_3A to CPU_GS464. * opcode/mips.h (mips_isa_table): Delete CPU_LOONGSON_3A case. ld/ * testsuite/ld-mips-elf/mips-elf-flags.exp: Rename loongson3a to gs464. opcodes/ * mips-dis.c (mips_arch_choices): Add gs464 descriptors, Keep loongson3a as an alias of gs464 for compatibility. * mips-opc.c (mips_opcodes): Change Comments.	8 years ago
Thomas Preud'homme	a05a5b64cf	Fix use of "command line X" in binutils doc Binutils documentation uses a mix of spelling for the compound word "command-line X". According to [1]: "Sometimes compound words are written separately (nail polish), sometimes with a hyphen (short-sighted) and sometimes as one word (eyelashes). Often new compounds are written as two separate words and, as they become more familiar, they are either connected with a hyphen (-) or made into one word." I think command-line X is common enough in our industry that the two workds command and line should be connected. Since command-line is more common than commandline, I propose to update binutils documentation to consistently use "command-line" when this is used as an adjective to a noun (eg. command-line argument, command-line switch, command-line option and command-line flag). I've left occurences of "the command line" as is. I've also left gdb, sim and readline alone and have only touched public documentation (texi and NEWS files). [1] http://dictionary.cambridge.org/grammar/british-grammar/word-formation/compounds 2018-07-02 Thomas Preud'homme <thomas.preudhomme@arm.com> bfd/ * doc/bfdint.texi: Use command-line consistently when used in a compount word. * doc/bfdsumm.texi: Likewise. binutils/ * NEWS: Use command-line consistently when used in a compount word. * doc/binutils.texi: Likewise and fix trailing whitespace on same line. gas/ * NEWS: Use command-line consistently when used in a compount word. * doc/as.texi: Likewise. * doc/c-aarch64.texi: Likewise. * doc/c-alpha.texi: Likewise. * doc/c-arc.texi: Likewise. * doc/c-arm.texi: Likewise. * doc/c-avr.texi: Likewise. * doc/c-bfin.texi: Likewise. * doc/c-cris.texi: Likewise. * doc/c-epiphany.texi: Likewise. * doc/c-i386.texi: Likewise. * doc/c-ia64.texi: Likewise. * doc/c-lm32.texi: Likewise. * doc/c-m32r.texi: Likewise. * doc/c-m68k.texi: Likewise. * doc/c-mips.texi: Likewise. * doc/c-mmix.texi: Likewise. * doc/c-msp430.texi: Likewise. * doc/c-mt.texi: Likewise. * doc/c-nios2.texi: Likewise. * doc/c-ppc.texi: Likewise. * doc/c-pru.texi: Likewise. * doc/c-rl78.texi: Likewise. * doc/c-rx.texi: Likewise. * doc/c-tic6x.texi: Likewise. * doc/c-v850.texi: Likewise. * doc/c-vax.texi: Likewise. * doc/c-visium.texi: Likewise. * doc/c-xstormy16.texi: Likewise. * doc/c-xtensa.texi: Likewise. * doc/c-z80.texi: Likewise. * doc/c-z8k.texi: Likewise. * doc/internals.texi: Likewise. gprof/ * gprof.texi: Use command-line consistently when used in a compount word. ld/ * NEWS: Use command-line consistently when used in a compount word. * ld.texinfo: Likewise. * ldint.texinfo: Likewise.	8 years ago
Nick Clifton	719d828850	Add 2.30 branch notes to ChangeLogs and NEWS files.	8 years ago
Ant Bikeneev	1869e86f2e	Add option to ar's 't' command to display the offset of elements within the archive. PR 23107 * ar.c (display_offsets): New variable. (usage): Add description of 'O' operator. (decode_option): Handle 'O' operator. (print_descr): Pass display_offsets to print_arelt_descr. * arsup.c: Update call to printy_arelt_descr. * objdump.c: Likewise. * bucomm.c (print_arelt_descr): If offsets parameter is true then display offset of archive element within the archive. * bucomm.h: Update prototype for print_arelt_descr. * doc/binutils.texi: Update description of ar command. * NEWS: Mention the new feature. * testsuite/binutils-all/ar.exp: Add text of new feature.	8 years ago
Tamar Christina	7d02540ab7	Allow non-fatal errors to be emitted and for disassembly notes be placed on AArch64 This patch adds a new platform option "notes" that can be used to indicate if disassembly notes should be placed in the disassembly as comments. These notes can contain information about a failing constraint such as reading from a write-only register. The disassembly will not be blocked because of this but -M notes will emit a comment saying that the operation is not allowed. For assembly this patch adds a new non-fatal status for errors. This is essentially a warning. The reason for not creating an actual warning type is that this causes the interaction between the ordering of warnings and errors to be problematic. Currently the error buffer is almost always filled because of the way operands are matched during assembly. An earlier template may have put an error there that would only be displayed if no other template matches or generates a higher priority error. But by definition a warning is lower priority than a warning, so the error (which is incorrect if another template matched) will supersede the warning. By treating warnings as errors and only later relaxing the severity this relationship keeps working and the existing reporting infrastructure can be re-used. binutils/ PR binutils/21446 * doc/binutils.texi (-M): Document AArch64 options. * NEWS: Document notes and warnings. gas/ PR binutils/21446 * config/tc-aarch64.c (print_operands): Indicate no notes. (output_operand_error_record): Support non-fatal errors. (output_operand_error_report, warn_unpredictable_ldst, md_assemble): Likewise. include/ PR binutils/21446 * opcode/aarch64.h (aarch64_operand_error): Add non_fatal. (aarch64_print_operand): Support notes. opcodes/ PR binutils/21446 * aarch64-dis.c (no_notes: New. (parse_aarch64_dis_option): Support notes. (aarch64_decode_insn, print_operands): Likewise. (print_aarch64_disassembler_options): Document notes. * aarch64-opc.c (aarch64_print_operand): Support notes.	8 years ago
Francois H. Theron	fe944acf8f	This patch adds support to objdump for disassembly of NFP (Netronome Flow Processor) ELF files (.nffw) as well as some basic readelf support. bfd * Makefile.am: Added NFP files to build. * archures.c: Added bfd_arch_nfp * config.bfd: Added NFP support. * configure.ac: Added NFP support. * cpu-nfp.c: New, for NFP support. * elf-bfd.h: Added elf_section_info() * elf64-nfp.c: New, for NFP support. * po/SRC-POTFILES.in: Added NFP source files. * targets.c: Added nfp_elf64_vec * bfd-in2.h: Regenerate. * Makefile.in: Regenerate. * configure: Regenerate. binutils* readelf.c: Very basic support for EM_NFP and its section types. * testsuite/binutils-all/nfp: New directory. * testsuite/binutils-all/nfp/objdump.exp: New file. Run new tests. * testsuite/binutils-all/nfp/test2_ctx8.d: New file. * testsuite/binutils-all/nfp/test2_no-pc_ctx4.d: New file. * testsuite/binutils-all/nfp/test1.d: New file. * testsuite/binutils-all/nfp/nfp6000.nffw: New file. * testsuite/binutils-all/nfp/test2_nfp6000.nffw: New file. * NEWS: Mention the new support. include * dis-asm.h: Added print_nfp_disassembler_options prototype. * elf/common.h: Added EM_NFP, officially assigned. See Google Group Generic System V Application Binary Interface. * elf/nfp.h: New, for NFP support. * opcode/nfp.h: New, for NFP support. opcodes Makefile.am: Added nfp-dis.c. configure.ac: Added bfd_nfp_arch. disassemble.h: Added print_insn_nfp prototype. disassemble.c: Added ARCH_nfp and call to print_insn_nfp nfp-dis.c: New, for NFP support. po/POTFILES.in: Added nfp-dis.c to the list. Makefile.in: Regenerate. configure: Regenerate.	8 years ago
Nick Clifton	9176ac5bfc	Add 2.30 markers to NEWS files. binutils/ * NEWS: Add marker for 2.30. gas/ * NEWS: Add marker for 2.30. ld/ * NEWS: Add marker for 2.30.	8 years ago
Alan Modra	219d1afa89	Update year range in copyright notice of binutils files	8 years ago
Nick Clifton	dda8d76d0d	Add support to readelf and objdump for following links to separate debug information files. Hi Guys, I am applying the rather large patch attached to this email to enhance the readelf and objdump programs so that they now have the ability to follow links to separate debug info files. (As requested by PR 15152). So for example whereas before we had this output: $ readelf -wi main.exe Contents of the .debug_info section: [...] <15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) [...] With the new option enabled we get: $ readelf -wiK main.exe main.exe: Found separate debug info file: dwz.debug Contents of the .debug_info section (loaded from main.exe): [...] <15> DW_AT_comp_dir : (alt indirect string, offset: 0x30c) /home/nickc/Downloads/dwzm [...] The link following feature also means that we can get two lots of output if the same section exists in both the main file and the separate debug info file: $ readelf -wiK main.exe main.exe: Found separate debug info file: dwz.debug Contents of the .debug_info section (loaded from main.exe): [...] Contents of the .debug_info section (loaded from dwz.debug): [...] The patch also adds the ability to display the contents of debuglink sections: $ readelf -wk main.exe Contents of the .gnu_debugaltlink section: Separate debug info file: dwz.debug Build-ID (0x14 bytes): c4 a8 89 8d 64 cf 70 8a 35 68 21 f2 ed 24 45 3e 18 7a 7a 93 Naturally there are long versions of these options (=follow-links and =links). The documentation has been updated as well, and since both readelf and objdump use the same set of debug display options, I have moved the text into a separate file. There are also a couple of new binutils tests to exercise the new behaviour. There are a couple of missing features in the current patch however, although I do intend to address them in follow up submissions: Firstly the code does not check the build-id inside separate debug info files when it is searching for a file specified by a .gnu_debugaltlink section. It just assumes that if the file is there, then it contains the information being sought. Secondly I have not checked the DWARF-5 version of these link features, so there will probably be code to add there. Thirdly I have only implemented link following for the DW_FORM_GNU_strp_alt format. Other alternate formats (eg DW_FORM_GNU_ref_alt) have yet to be implemented. Lastly, whilst implementing this feature I found it necessary to move some of the global variables used by readelf (eg section_headers) into a structure that can be passed around. I have moved all of the global variables that were necessary to get the patch working, but I need to complete the operation and move the remaining, file-specific variables (eg dynamic_strings). Cheers Nick binutils PR 15152 * dwarf.h (enum dwarf_section_display_enum): Add gnu_debuglink, gnu_debugaltlink and separate_debug_str. (struct dwarf_section): Add filename field. Add prototypes for load_separate_debug_file, close_debug_file and open_debug_file. * dwarf.c (do_debug_links): New. (do_follow_links): New. (separate_debug_file, separate_debug_filename): New. (fetch_alt_indirect_string): New function. Retrieves a string from the debug string table in the separate debug info file. (read_and_display_attr_value): Use it with DW_FORM_GNU_strp_alt. (load_debug_section_with_follow): New function. Like load_debug_section, but if the first attempt fails, then tries again in the separate debug info file. (introduce): New function. (process_debug_info): Use load_debug_section_with_follow and introduce. (load_debug_info): Likewise. (display_debug_lines_raw): Likewise. (display_debug_lines_decoded): Likewise. (display_debug_macinfo): Likewise. (display_debug_macro): Likewise. (display_debug_abbrev): Likewise. (display_debug_loc): Likewise. (display_debug_str): Likewise. (display_debug_aranges): Likewise. (display_debug_addr); Likewise. (display_debug_frames): Likewise. (display_gdb_index): Likewise. (process_cu_tu_index): Likewise. (load_cu_tu_indexes): Likewise. (display_debug_links): New function. Displays the contents of a .gnu_debuglink or .gnu_debugaltlink section. (calc_gnu_debuglink_ctc32):New function. Calculates a CRC32 value. (check_gnu_debuglink): New function. Checks the CRC of a potential separate debug info file. (parse_gnu_debuglink): New function. Reads a CRC value out of a .gnu_debuglink section. (check_gnu_debugaltlink): New function. (parse_gnu_debugaltlink): New function. Reads the build-id value out of a .gnu_debugaltlink section. (load_separate_debug_info): New function. Finds and loads a separate debug info file. (load_separate_debug_file): New function. Attempts to find and follow a link to a separate debug info file. (free_debug_memory): Free the separate debug info file information. (opts_table): Add "follow-links" and "links". (dwarf_select_sections_by_letters): Add "k" and "K". (debug_displays): Reformat. Add .gnu-debuglink and .gnu_debugaltlink. Add an extra entry for .debug_str in a separate debug info file. * doc/binutils.texi: Move description of debug dump features common to both readelf and objdump into... * objdump.c (usage): Add -Wk and -WK. (load_specific_debug_section): Initialise the filename field in the dwarf_section structure. (close_debug_file): New function. (open_debug_file): New function. (dump_dwarf): Load and dump the separate debug info sections. * readelf.c (struct filedata): New structure. Contains various variables that used to be global: (current_file_size, string_table, string_table_length, elf_header) (section_headers, program_headers, dump_sects, num_dump_sects): Move into filedata structure. (cmdline): New global variable. Contains list of sections to dump by number, as specified on the command line. Add filedata parameter to most functions. (load_debug_section): Load the string table if it has not already been retrieved. (close_file): New function. (close_debug_file): New function. (open_file): New function. (open_debug_file): New function. (process_object): Process sections in any separate debug info files. * doc/debug.options.texi: New file. Add description of =links and =follow-links options. * NEWS: Mention the new feature. * elfcomm.c: Have the byte gte functions take a const pointer. * elfcomm.h: Update prototypes. * testsuite/binutils-all/dw5.W: Update expected output. * testsuite/binutils-all/objdump.WL: Update expected output. * testsuite/binutils-all/objdump.exp: Add test of -WK and -Wk. * testsuite/binutils-all/readelf.exp: Add test of -wK and -wk. * testsuite/binutils-all/readelf.k: New file. * testsuite/binutils-all/objdump.Wk: New file. * testsuite/binutils-all/objdump.WK2: New file. * testsuite/binutils-all/linkdebug.s: New file. * testsuite/binutils-all/debuglink.s: New file. gas * testsuite/gas/avr/large-debug-line-table.d: Update expected output. * testsuite/gas/elf/dwarf2-11.d: Likewise. * testsuite/gas/elf/dwarf2-12.d: Likewise. * testsuite/gas/elf/dwarf2-13.d: Likewise. * testsuite/gas/elf/dwarf2-14.d: Likewise. * testsuite/gas/elf/dwarf2-15.d: Likewise. * testsuite/gas/elf/dwarf2-16.d: Likewise. * testsuite/gas/elf/dwarf2-17.d: Likewise. * testsuite/gas/elf/dwarf2-18.d: Likewise. * testsuite/gas/elf/dwarf2-5.d: Likewise. * testsuite/gas/elf/dwarf2-6.d: Likewise. * testsuite/gas/elf/dwarf2-7.d: Likewise. ld * testsuite/ld-avr/gc-section-debugline.d: Update expected output.	9 years ago
Tristan Gingold	55a09eb6df	Add markers. binutils/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. gas/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29. ld/ 2017-07-04 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.29.	9 years ago
Maciej W. Rozycki	909b4e3d5f	MIPS: Add microMIPS XPA support Add support for the base and Virtualization ASE microMIPS instructions as per the architecture specifications[1][2][3][4]. Most of this change by Andrew Bennett. [1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00582, Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit Instructions", p. 340 [2] "microMIPS32 Architecture for Programmers Volume IV-i: Virtualization Module of the microMIPS32 Architecture", MIPS Technologies, Inc., Document Number: MD00848, Revision 1.06, December 10, 2013, Section 6.1 "Overview", pp. 133, 136 [3] "MIPS Architecture for Programmers Volume II-B: The microMIPS64 Instruction Set", MIPS Technologies, Inc., Document Number: MD00594, Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit Instructions", pp. 415, 444 [4] "microMIPS64 Architecture for Programmers Volume IV-i: Virtualization Module of the microMIPS64 Architecture", MIPS Technologies, Inc., Document Number: MD00849, Revision 1.06, December 10, 2013, Section 6.1 "Overview", pp. 134-135, 139-140 binutils/ * NEWS: Mention microMIPS XPA support. opcodes/ * micromips-opc.c (XPA, XPAVZ): New macros. (micromips_opcodes): Add "mfhc0", "mfhgc0", "mthc0" and "mthgc0". gas/ * config/tc-mips.c (mips_ases): Add microMIPS XPA support. * testsuite/gas/mips/micromips@xpa.d: New test. * testsuite/gas/mips/mips.exp: Run the new test. Enable `xpa-virt-err' test for `micromips'.	9 years ago
Maciej W. Rozycki	f5b2fd523f	MIPS: Add microMIPS R5 support Add base microMIPS Release 5 ISA support and the ERETNC instruction in particular, as per the architecture specifications[1][2]. Most of this change by Andrew Bennett. References: [1] "MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set", MIPS Technologies, Inc., Document Number: MD00582, Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit Instructions", pp. 266-267 [2] "MIPS Architecture for Programmers Volume II-B: The microMIPS64 Instruction Set", MIPS Technologies, Inc., Document Number: MD00594, Revision 5.04, January 15, 2014, Section 5.5 "Recoded 32-Bit Instructions", pp. 326-327 binutils/ * NEWS: Mention microMIPS Release 5 ISA support. opcodes/ * micromips-opc.c (I36): New macro. (micromips_opcodes): Add "eretnc". gas/ * testsuite/gas/mips/micromips@r5.d: New test. * testsuite/gas/mips/mips.exp: Run the new test.	9 years ago
Maciej W. Rozycki	38bf472a15	MIPS: Add Imagination interAptiv MR2 MIPS32r3 processor support Add support for the Imagination interAptiv MR2 MIPS32r3 processor with the MIPS16e2 ASE as per documentation, including in particular: 1. Support for implementation-specific interAptiv MR2 COPYW and UCOPYW MIPS16e2 instructions[1], for assembly and disassembly, 2. Support for implementation-specific interAptiv MR2 SAVE and RESTORE regular MIPS instructions[2], for assembly and disassembly, 3. ELF binary file annotation for the interAptiv MR2 MIPS architecture extension. 4. Support for interAptiv MR2 architecture selection for assembly, in the form of the `-march=interaptiv-mr2' command-line option and its corresponding `arch=interaptiv-mr2' setting for the `.set' and `.module' pseudo-ops. 5. Support for interAptiv MR2 architecture selection for disassembly, in the form of the `mips:interaptiv-mr2' target architecture, for use e.g. with the `-m' command-line option for `objdump'. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 interAptiv Multiprocessing System Software User's Manual", Imagination Technologies Ltd., Document Number: MD00904, Revision 02.01, June 15, 2016, Section 24.3 "MIPS16e2 Implementation Specific Instructions", pp. 878-883 [2] same, Chapter 25 "Implementation-specific Instructions", pp. 911-917 include/ * elf/mips.h (E_MIPS_MACH_IAMR2): New macro. (AFL_EXT_INTERAPTIV_MR2): Likewise. * opcode/mips.h: Document new operand codes defined. (INSN_INTERAPTIV_MR2): New macro. (INSN_CHIP_MASK): Adjust accordingly. (CPU_INTERAPTIV_MR2): New macro. (cpu_is_member) <CPU_INTERAPTIV_MR2>: New case. (MIPS16_ALL_ARGS): Rename to... (MIPS_SVRS_ALL_ARGS): ... this. (MIPS16_ALL_STATICS): Rename to... (MIPS_SVRS_ALL_STATICS): ... this. bfd/ * archures.c (bfd_mach_mips_interaptiv_mr2): New macro. * cpu-mips.c (I_interaptiv_mr2): New enum value. (arch_info_struct): Add "mips:interaptiv-mr2" entry. * elfxx-mips.c (_bfd_elf_mips_mach) <E_MIPS_MACH_IAMR2>: New case. (mips_set_isa_flags) <bfd_mach_mips_interaptiv_mr2>: Likewise. (bfd_mips_isa_ext) <bfd_mach_mips_interaptiv_mr2>: Likewise. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. (mips_mach_extensions): Add `bfd_mach_mipsisa32r3' and `bfd_mach_mips_interaptiv_mr2' entries. * bfd-in2.h: Regenerate. opcodes/ * mips-formats.h (INT_BIAS): New macro. (INT_ADJ): Redefine in INT_BIAS terms. * mips-dis.c (mips_arch_choices): Add "interaptiv-mr2" entry. (mips_print_save_restore): New function. (print_insn_arg) <OP_SAVE_RESTORE_LIST>: Update comment. (validate_insn_args) <OP_SAVE_RESTORE_LIST>: Remove `abort' call. (print_insn_args): Handle OP_SAVE_RESTORE_LIST. (print_mips16_insn_arg): Call `mips_print_save_restore' for OP_SAVE_RESTORE_LIST handling, factored out from here. * mips-opc.c (decode_mips_operand) <'-'> <'m'>: New case. (RD_31, RD_SP, WR_SP, MOD_SP, IAMR2): New macros. (mips_builtin_opcodes): Add "restore" and "save" entries. * mips16-opc.c (decode_mips16_operand) <'n', 'o'>: New cases. (IAMR2): New macro. (mips16_opcodes): Add "copyw" and "ucopyw" entries. binutils/ * readelf.c (get_machine_flags) <E_MIPS_MACH_IAMR2>: New case. (print_mips_isa_ext) <AFL_EXT_INTERAPTIV_MR2>: Likewise. * NEWS: Mention Imagination interAptiv MR2 processor support. gas/ * config/tc-mips.c (validate_mips_insn): Handle OP_SAVE_RESTORE_LIST specially. (mips_encode_save_restore, mips16_encode_save_restore): New functions. (match_save_restore_list_operand): Factor out SAVE/RESTORE operand insertion into the instruction word or halfword to these new functions. (mips_cpu_info_table): Add "interaptiv-mr2" entry. * doc/c-mips.texi (MIPS Options): Add `interaptiv-mr2' to the `-march=' argument list.	9 years ago
Jose E. Marchesi	6451799480	binutils: support for the SPARC M8 processor This patch adds support for the new SPARC M8 processor (implementing OSA 2017) to binutils. New instructions: - Dictionary Unpack + dictunpack - Partitioned Compare with shifted result + Signed variants: fpcmp{le,gt,eq,ne}{8,16,32}shl + Unsigned variants: fpcmpu{le,gt}{8,16,32}shl - Partitioned Dual-Equal compared, with shifted result + fpcmpde{8,16,32}shl - Partitioned Unsigned Range Compare, with shifted result + fpcmpur{8,16,32}shl - 64-bit shifts on Floating-Point registers + fps{ll,ra,rl}64x - Misaligned loads and stores + ldm{sh,uh,sw,uw,x,ux} + ldm{sh,uh,sw,uw,x,ux}a + ldmf{s,d} + ldmf{s,d}a + stm{h,w,x} + stm{h,w,x}a + stmf{s,d} + stmf{s,d}a - Oracle Numbers + on{add,sub,mul,div} - Reverse Bytes/Bits + revbitsb + revbytes{h,w,x} - Run-Length instructions + rle_burst + rle_length - New crypto instructions + sha3 - Instruction to read the new register %entropy + rd %entropy New Alternate Address Identifiers: - 0x24, #ASI_CORE_COMMIT_COUNT - 0x24, #ASI_CORE_SELECT_COUNT - 0x48, #ASI_ARF_ECC_REG - 0x53, #ASI_ITLB_PROBE - 0x58, #ASI_DSFAR - 0x5a, #ASI_DTLB_PROBE_PRIMARY - 0x5b, #ASI_DTLB_PROBE_REAL - 0x64, #ASI_CORE_SELECT_COMMIT_NHT The new assembler command-line options for selecting the M8 architecture are: -Av9m8 or -Asparc6 for 64-bit binaries. -Av8plusm8 for 32-bit (v8+) binaries. The corresponding disassembler command-line options are: -msparc:v9m8 for 64-bit binaries. -msparc:v8plusm8 for 32-bit (v8+) binaries. Tested for regressions in the following targets: sparc-aout sparc-linux sparc-vxworks sparc64-linux bfd/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * archures.c (bfd_mach_sparc_v9m8): Define. (bfd_mach_sparc_v8plusm8): Likewise. (bfd_mach_sparc_v9_p): Adjust to M8. (bfd_mach_sparc_64bit_p): Likewise. * aoutx.h (machine_type): Handle bfd_mach_sparc_v9m8 and bfd_mach_sparc_v8plusm8. * bfd-in2.h: Regenerated. * cpu-sparc.c (arch_info_struct): Entries for sparc:v9m8 and sparc:v8plusm8. * elfxx-sparc.c (_bfd_sparc_elf_object_p): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8 using the new hw capabilities ONADDSUB, ONMUL, ONDIV, DICTUNP, FPCPSHL, RLE and SHA3. * elf32-sparc.c (elf32_sparc_final_write_processing): Handle bfd_mach_sparc_v8plusm8. binutils/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * NEWS: Mention the SPARC M8 support. gas/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * config/tc-sparc.c (sparc_arch_table): Entries for `sparc6', `v9m8' and `v8plusm8'. (sparc_md_end): Handle SPARC_OPCODE_ARCH_M8. (get_hwcap_name): Support the M8 hardware capabilities. (sparc_ip): Handle new operand types. * doc/c-sparc.texi (Sparc-Opts): Document -Av9m8, -Av8plusm8 and -Asparc6, and the corresponding -xarch aliases. * testsuite/gas/sparc/sparc6.s: New file. * testsuite/gas/sparc/sparc6.d: Likewise. * testsuite/gas/sparc/sparc6-diag.s: Likewise. * testsuite/gas/sparc/sparc6-diag.l: Likewise. * testsuite/gas/sparc/fpcmpshl.s: Likewise. * testsuite/gas/sparc/fpcmpshl.d: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.s: Likewise. * testsuite/gas/sparc/fpcmpshl-diag.l: Likewise. * testsuite/gas/sparc/ldm-stm.s: Likewise. * testsuite/gas/sparc/ldm-stm.d: Likewise. * testsuite/gas/sparc/ldm-stm-diag.s: Likewise. * testsuite/gas/sparc/ldm-stm-diag.l: Likewise. * testsuite/gas/sparc/ldmf-stmf.s: Likewise. * testsuite/gas/sparc/ldmf-stmf.d: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.s: Likewise. * testsuite/gas/sparc/ldmf-stmf-diag.l: Likewise. * testsuite/gas/sparc/on.s: Likewise. * testsuite/gas/sparc/on.d: Likewise. * testsuite/gas/sparc/on-diag.s: Likewise. * testsuite/gas/sparc/on-diag.l: Likewise. * testsuite/gas/sparc/rle.s: Likewise. * testsuite/gas/sparc/rle.d: Likewise. * testsuite/gas/sparc/sparc.exp (gas_64_check): Run new tests. * testsuite/gas/sparc/rdasr.s: Add test for RDENTROPY. * testsuite/gas/sparc/rdasr.d: Likewise. include/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * elf/sparc.h (ELF_SPARC_HWCAP2_SPARC6): Define. (ELF_SPARC_HWCAP2_ONADDSUB): Likewise. (ELF_SPARC_HWCAP2_ONMUL): Likewise. (ELF_SPARC_HWCAP2_ONDIV): Likewise. (ELF_SPARC_HWCAP2_DICTUNP): Likewise. (ELF_SPARC_HWCAP2_FPCMPSHL): Likewise. (ELF_SPARC_HWCAP2_RLE): Likewise. (ELF_SPARC_HWCAP2_SHA3): Likewise. * opcode/sparc.h (sparc_opcode_arch_val): Add SPARC_OPCODE_ARCH_M8 and adjust SPARC_OPCODE_ARCH_MAX. (HWCAP2_SPARC6): Define. (HWCAP2_ONADDSUB): Likewise. (HWCAP2_ONMUL): Likewise. (HWCAP2_ONDIV): Likewise. (HWCAP2_DICTUNP): Likewise. (HWCAP2_FPCMPSHL): Likewise. (HWCAP2_RLE): Likewise. (HWCAP2_SHA3): Likewise. (OPM): Likewise. (OPMI): Likewise. (ONFCN): Likewise. (REVFCN): Likewise. (SIMM10): Likewise. opcodes/ChangeLog: 2017-05-19 Jose E. Marchesi <jose.marchesi@oracle.com> * sparc-dis.c (MASK_V9): Include SPARC_OPCODE_ARCH_M8. (X_IMM2): Define. (compute_arch_mask): Handle bfd_mach_sparc_v8plusm8 and bfd_mach_sparc_v9m8. (print_insn_sparc): Handle new operand types. * sparc-opc.c (MASK_M8): Define. (v6): Add MASK_M8. (v6notlet): Likewise. (v7): Likewise. (v8): Likewise. (v9): Likewise. (v9a): Likewise. (v9b): Likewise. (v9c): Likewise. (v9d): Likewise. (v9e): Likewise. (v9v): Likewise. (v9m): Likewise. (v9andleon): Likewise. (m8): Define. (HWS_VM8): Define. (HWS2_VM8): Likewise. (sparc_opcode_archs): Add entry for "m8". (sparc_opcodes): Add OSA2017 and M8 instructions dictunpack, fpcmp{ule,ugt,eq,ne,de,ur}{8,16,32}shl, fpx{ll,ra,rl}64x, ldm{sh,uh,sw,uw,x,ux}, ldm{sh,uh,sw,uw,x,ux}a, ldmf{s,d}, ldmf{s,d}a, on{add,sub,mul,div}, rdentropy, revbitsb, revbytes{h,w,x}, rle_burst, rle_length, sha3, stm{h,w,x}, stm{h,w,x}a, stmf{s,d}, stmf{s,d}a. (asi_table): New M8 ASIs ASI_CORE_COMMIT_COUNT, ASI_CORE_SELECT_COUNT, ASI_ARF_ECC_REG, ASI_ITLB_PROBE, ASI_DSFAR, ASI_DTLB_PROBE_PRIMARY, ASI_DTLB_PROBE_REAL, ASI_CORE_SELECT_COMMIT_NHT.	9 years ago
Maciej W. Rozycki	25499ac7ee	MIPS16e2: Add MIPS16e2 ASE support Add MIPS16e2 ASE support as per the architecture specification[1], including in particular: 1. A new ELF ASE flag to mark MIPS16e2 binaries. 2. MIPS16e2 instruction assembly support, including a relaxation update to use LUI rather than an LI/SLL instruction pair for loading the high part of 32-bit addresses. 3. MIPS16e2 instruction disassembly support, including updated rules for extended forms of instructions that are now subdecoded and therefore do not alias to the original MIPS16 ISA revision instructions even for encodings that are not valid in the MIPS16e2 instruction set. Add `-mmips16e2' and `-mno-mips16e2' GAS command-line options and their corresponding `mips16e2' and `no-mips16e2' settings for the `.set' and `.module' pseudo-ops. Control the availability of the MT ASE subset of the MIPS16e2 instruction set with a combination of these controls and the preexisting MT ASE controls. Parts of this change by Matthew Fortune and Andrew Bennett. References: [1] "MIPS32 Architecture for Programmers: MIPS16e2 Application-Specific Extension Technical Reference Manual", Imagination Technologies Ltd., Document Number: MD01172, Revision 01.00, April 26, 2016 include/ * elf/mips.h (AFL_ASE_MIPS16E2): New macro. (AFL_ASE_MASK): Adjust accordingly. * opcode/mips.h: Document new operand codes defined. (mips_operand_type): Add OP_REG28 enum value. (INSN2_SHORT_ONLY): Update description. (ASE_MIPS16E2, ASE_MIPS16E2_MT): New macros. bfd/ * elfxx-mips.c (print_mips_ases): Handle MIPS16e2 ASE. opcodes/ * mips-dis.c (mips_arch_choices): Add ASE_MIPS16E2 and ASE_MIPS16E2_MT flags to the unnamed MIPS16 entry. (mips_convert_abiflags_ases): Handle the AFL_ASE_MIPS16E2 flag. (print_insn_arg) <OP_REG28>: Add handler. (validate_insn_args) <OP_REG28>: Handle. (print_mips16_insn_arg): Handle MIPS16 instructions that require 32-bit encoding and 9-bit immediates. (print_insn_mips16): Handle MIPS16 instructions that require 32-bit encoding and MFC0/MTC0 operand decoding. * mips16-opc.c (decode_mips16_operand) <'>', '9', 'G', 'N', 'O'> <'Q', 'T', 'b', 'c', 'd', 'r', 'u'>: Add handlers. (RD_C0, WR_C0, E2, E2MT): New macros. (mips16_opcodes): Add entries for MIPS16e2 instructions: GP-relative "addiu" and its "addu" spelling, "andi", "cache", "di", "ehb", "ei", "ext", "ins", GP-relative "lb", "lbu", "lh", "lhu", and "lw" instructions, "ll", "lui", "lwl", "lwr", "mfc0", "movn", "movtn", "movtz", "movz", "mtc0", "ori", "pause", "pref", "rdhwr", "sc", GP-relative "sb", "sh" and "sw" instructions, "swl", "swr", "sync" and its "sync_acquire", "sync_mb", "sync_release", "sync_rmb" and "sync_wmb" aliases, "xori", "dmt", "dvpe", "emt" and "evpe". Add split regular/extended entries for original MIPS16 ISA revision instructions whose extended forms are subdecoded in the MIPS16e2 ISA revision: "li", "sll" and "srl". binutils/ * readelf.c (print_mips_ases): Handle MIPS16e2 ASE. * NEWS: Mention MIPS16e2 ASE support. gas/ * config/tc-mips.c (RELAX_MIPS16_ENCODE): Add `e2' flag. (RELAX_MIPS16_E2): New macro. (RELAX_MIPS16_PIC, RELAX_MIPS16_SYM32, RELAX_MIPS16_NOMACRO) (RELAX_MIPS16_USER_SMALL, RELAX_MIPS16_USER_EXT) (RELAX_MIPS16_DSLOT, RELAX_MIPS16_JAL_DSLOT) (RELAX_MIPS16_EXTENDED, RELAX_MIPS16_MARK_EXTENDED) (RELAX_MIPS16_CLEAR_EXTENDED, RELAX_MIPS16_ALWAYS_EXTENDED) (RELAX_MIPS16_MARK_ALWAYS_EXTENDED) (RELAX_MIPS16_CLEAR_ALWAYS_EXTENDED, RELAX_MIPS16_MACRO) (RELAX_MIPS16_MARK_MACRO, RELAX_MIPS16_CLEAR_MACRO): Shift bits. (mips16_immed_extend): New prototype. (options): Add OPTION_MIPS16E2 and OPTION_NO_MIPS16E2 enum values. (md_longopts): Add "mmips16e2" and "mno-mips16e2" options. (mips_ases): Add "mips16e2" entry. (mips_set_ase): Handle MIPS16e2 ASE. (insn_insert_operand): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (is_opcode_valid_16): Pass enabled ASE bitmask on to `opcode_is_member'. (validate_mips_insn): Explicitly handle immediates with MIPS16 instructions that require 32-bit encoding. (operand_reg_mask) <OP_REG28>: Add handler. (match_reg28_operand): New function. (match_operand) <OP_REG28>: Add handler. (append_insn): Pass ASE_MIPS16E2 setting to RELAX_MIPS16_ENCODE. (match_mips16_insn): Handle MIPS16 instructions that require 32-bit encoding and `V' and `u' operand codes. (mips16_ip): Allow any characters except from `.' in opcodes. (mips16_immed_extend): Handle 9-bit immediates. Do not shuffle immediates whose width is not one of these listed. (md_estimate_size_before_relax): Handle MIPS16e2 relaxation. (mips_relax_frag): Likewise. (md_convert_frag): Likewise. (mips_convert_ase_flags): Handle MIPS16e2 ASE. * doc/as.texinfo (Target MIPS options): Add `-mmips16e2' and `-mno-mips16e2' options. (-mmips16e2, -mno-mips16e2): New options. * doc/c-mips.texi (MIPS Options): Add `-mmips16e2' and `-mno-mips16e2' options. (MIPS ASE Instruction Generation Overrides): Add `.set mips16e2' and `.set nomips16e2'.	9 years ago
H.J. Lu	a91e1603af	Support ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX Mark an ALLOC section, which should be placed in special memory area, with SHF_GNU_MBIND. Its sh_info field indicates the special memory type. GNU_MBIND section names start with ".mbind" so that they are placed as orphan sections by linker. All input GNU_MBIND sections with the same sh_type, sh_flags and sh_info are placed in one output GNU_MBIND section. In executable and shared object, create a GNU_MBIND segment for each GNU_MBIND section and its segment type is PT_GNU_MBIND_LO plus the sh_info value. Each GNU_MBIND segment is aligned at page boundary. The assembler syntax: .section .mbind.foo,"adx",%progbits ^ 0: Special memory type. \| 'd' for SHF_GNU_MBIND. .section .mbind.foo,"adx",%progbits,0x1 ^ 1: Special memory type. \| 'd' for SHF_GNU_MBIND. .section .mbind.bar,"adG",%progbits,.foo_group,comdat,0x2 ^ 2: Special memory type. \| 'd' for SHF_GNU_MBIND. bfd/ * elf.c (get_program_header_size): Add a GNU_MBIND segment for each GNU_MBIND section and align GNU_MBIND section to page size. (_bfd_elf_map_sections_to_segments): Create a GNU_MBIND segment for each GNU_MBIND section. (_bfd_elf_init_private_section_data): Copy sh_info from input for GNU_MBIND section. binutils/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * readelf.c (get_segment_type): Handle PT_GNU_MBIND_XXX. (get_elf_section_flags): Handle SHF_GNU_MBIND. (process_section_headers): Likewise. * testsuite/binutils-all/mbind1.s: New file. * testsuite/binutils-all/objcopy.exp: Run readelf test on mbind1.s. gas/ * NEWS: Mention support for ELF SHF_GNU_MBIND. * config/obj-elf.c (section_match): New. (get_section): Match both sh_info and group name. (obj_elf_change_section): Add argument for sh_info. Pass both sh_info and group name to get_section. Issue an error for SHF_GNU_MBIND section without SHF_ALLOC. Set sh_info. (obj_elf_parse_section_letters): Set SHF_GNU_MBIND for 'd'. (obj_elf_section): Support SHF_GNU_MBIND section info. * config/obj-elf.h (obj_elf_change_section): Add argument for sh_info. * config/tc-arm.c (start_unwind_section): Pass 0 as sh_info to obj_elf_change_section. * config/tc-ia64.c (obj_elf_vms_common): Likewise. * config/tc-microblaze.c (microblaze_s_data): Likewise. (microblaze_s_sdata): Likewise. (microblaze_s_rdata): Likewise. (microblaze_s_bss): Likewise. * config/tc-mips.c (s_change_section): Likewise. * config/tc-msp430.c (msp430_profiler): Likewise. * config/tc-rx.c (parse_rx_section): Likewise. * config/tc-tic6x.c (tic6x_start_unwind_section): Likewise. * doc/as.texinfo: Document 'd' for SHF_GNU_MBIND. * testsuite/gas/elf/elf.exp: Run section12a, section12b and section13. * testsuite/gas/elf/section10.d: Updated. * testsuite/gas/elf/section10.s: Likewise. * testsuite/gas/elf/section12.s: New file. * testsuite/gas/elf/section12a.d: Likewise. * testsuite/gas/elf/section12b.d: Likewise. * testsuite/gas/elf/section13.l: Likewise. * testsuite/gas/elf/section13.d: Likewise. * testsuite/gas/elf/section13.s: Likewise. include/ * elf/common.h (PT_GNU_MBIND_NUM): New. (PT_GNU_MBIND_LO): Likewise. (PT_GNU_MBIND_HI): Likewise. (SHF_GNU_MBIND): Likewise. ld/ * NEWS: Mention support for ELF SHF_GNU_MBIND and PT_GNU_MBIND_XXX. * emultempl/elf32.em (gld${EMULATION_NAME}_place_orphan): Place input GNU_MBIND sections with the same type, attributes and sh_info field into a single output GNU_MBIND section. * testsuite/ld-elf/elf.exp: Run mbind2a and mbind2b. * testsuite/ld-elf/mbind1.s: New file. * testsuite/ld-elf/mbind1a.d: Likewise. * testsuite/ld-elf/mbind1b.d: Likewise. * testsuite/ld-elf/mbind1c.d: Likewise. * testsuite/ld-elf/mbind2a.s: Likewise. * testsuite/ld-elf/mbind2b.c: Likewise.	9 years ago
Pip Cet	efdf7a02db	Fix minor problems with previous wasm32 binutils commit. binutils * NEWS: Use "WebAssembly" consistently. * testsuite/binutils-all/wasm32/wasm32.exp: Fix copyright notice.	9 years ago
Pip Cet	f96bd6c2d7	Add support for the WebAssembly file format and the wasm32 ELF conversion to gas and the binutils. binutils * readelf.c: Add support for wasm32 ELF format WebAssembly files. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_none_reloc_): Likewise. * NEWS: Mention the new support. * testsuite/lib/binutils-common.exp (is_elf_format): Mark wasm32 as ELF target. (supports_gnu_unique): Mark wasm32 as supporting STB_GNU_UNIQUE. * testsuite/binutils-all/nm.exp: Mark wasm32 as requiring .size annotations. * testsuite/binutils-all/wasm32: New directory. * testsuite/binutils-all/wasm32/create-wasm.d: New file. * testsuite/binutils-all/wasm32/create-wasm.s: Likewise. * testsuite/binutils-all/wasm32/custom-section.d: Likewise. * testsuite/binutils-all/wasm32/custom-section.s: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.d: Likewise. * testsuite/binutils-all/wasm32/invalid-wasm-1.s: Likewise. * testsuite/binutils-all/wasm32/long-sections.d: Likewise. * testsuite/binutils-all/wasm32/long-sections.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm.s: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.d: Likewise. * testsuite/binutils-all/wasm32/parse-wasm-2.s: Likewise. * testsuite/binutils-all/wasm32/prepared-section.d: Likewise. * testsuite/binutils-all/wasm32/prepared-section.s: Likewise. * testsuite/binutils-all/wasm32/wasm32.exp: New file, run tests. gas * config/tc-wasm32.h: New file: Add WebAssembly assembler target. * config/tc-wasm32.c: New file: Add WebAssembly assembler target. * Makefile.am: Add WebAssembly assembler target. * configure.tgt: Add WebAssembly assembler target. * doc/c-wasm32.texi: New file: Start documenting WebAssembly assembler. * doc/all.texi: Define WASM32. * doc/as.texinfo: Add WebAssembly entries. * NEWS: Mention the new support. * Makefile.in: Regenerate. * po/gas.pot: Regenerate. * po/POTFILES.in: Regenerate. * testsuite/gas/wasm32: New directory. * testsuite/gas/wasm32/allinsn.d: New file. * testsuite/gas/wasm32/allinsn.s: New file. * testsuite/gas/wasm32/illegal.l: New file. * testsuite/gas/wasm32/illegal.s: New file. * testsuite/gas/wasm32/illegal-2.l: New file. * testsuite/gas/wasm32/illegal-2.s: New file. * testsuite/gas/wasm32/illegal-3.l: New file. * testsuite/gas/wasm32/illegal-3.s: New file. * testsuite/gas/wasm32/illegal-4.l: New file. * testsuite/gas/wasm32/illegal-4.s: New file. * testsuite/gas/wasm32/illegal-5.l: New file. * testsuite/gas/wasm32/illegal-5.s: New file. * testsuite/gas/wasm32/illegal-6.l: New file. * testsuite/gas/wasm32/illegal-6.s: New file. * testsuite/gas/wasm32/illegal-7.l: New file. * testsuite/gas/wasm32/illegal-7.s: New file. * testsuite/gas/wasm32/illegal-8.l: New file. * testsuite/gas/wasm32/illegal-8.s: New file. * testsuite/gas/wasm32/illegal-9.l: New file. * testsuite/gas/wasm32/illegal-9.s: New file. * testsuite/gas/wasm32/illegal-10.l: New file. * testsuite/gas/wasm32/illegal-10.s: New file. * testsuite/gas/wasm32/illegal-11.l: New file. * testsuite/gas/wasm32/illegal-11.s: New file. * testsuite/gas/wasm32/illegal-12.l: New file. * testsuite/gas/wasm32/illegal-12.s: New file. * testsuite/gas/wasm32/illegal-13.l: New file. * testsuite/gas/wasm32/illegal-13.s: New file. * testsuite/gas/wasm32/illegal-14.l: New file. * testsuite/gas/wasm32/illegal-14.s: New file. * testsuite/gas/wasm32/illegal-15.l: New file. * testsuite/gas/wasm32/illegal-15.s: New file. * testsuite/gas/wasm32/illegal-16.l: New file. * testsuite/gas/wasm32/illegal-16.s: New file. * testsuite/gas/wasm32/illegal-17.l: New file. * testsuite/gas/wasm32/illegal-17.s: New file. * testsuite/gas/wasm32/illegal-18.l: New file. * testsuite/gas/wasm32/illegal-18.s: New file. * testsuite/gas/wasm32/illegal-19.l: New file. * testsuite/gas/wasm32/illegal-19.s: New file. * testsuite/gas/wasm32/illegal-20.l: New file. * testsuite/gas/wasm32/illegal-20.s: New file. * testsuite/gas/wasm32/illegal-21.l: New file. * testsuite/gas/wasm32/illegal-21.s: New file. * testsuite/gas/wasm32/illegal-22.l: New file. * testsuite/gas/wasm32/illegal-22.s: New file. * testsuite/gas/wasm32/illegal-24.l: New file. * testsuite/gas/wasm32/illegal-24.s: New file. * testsuite/gas/wasm32/illegal-25.l: New file. * testsuite/gas/wasm32/illegal-25.s: New file. * testsuite/gas/wasm32/reloc.d: New file. * testsuite/gas/wasm32/reloc.s: New file. * testsuite/gas/wasm32/wasm32.exp: New tests for WebAssembly architecture. opcodes * configure.ac: Add (empty) bfd_wasm32_arch target. * configure: Regenerate * po/opcodes.pot: Regenerate. include * opcode/wasm.h: New file to support wasm32 architecture. * elf/wasm32.h: Add R_WASM32_32 relocation. bfd * elf32-wasm32.c: Add relocation code, two relocs. * reloc.c: Add wasm32 relocations. * libbfd.h: Regenerate. * bfd-in2.h: Regenerate. * bfd/po/bfd.pot: Regenerate.	9 years ago
Andi Kleen	4a14e30646	Add --inlines option to objdump to include scope backtrace of inlined functions when generating source line number information. * objdump.c (unwind_inlines): Add. (option_values): Add OPTION_INLINES. (show_line): Unwind inlines if requested. (main): Parse OPTION_INLINES. (usage): Document --inlines. * doc/binutils.texi: Document --inlines. * NEWS: Likewise.	9 years ago
Nick Clifton	9ef920e933	Add support for displaying and merging GNU_BUILD_NOTEs. include * elf/common.h (SHF_GNU_BUILD_NOTE): Define. (NT_GNU_PROPERTY_TYPE_0): Define. (NT_GNU_BUILD_ATTRIBUTE_OPEN): Define. (NT_GNU_BUILD_ATTRIBUTE_FUN): Define. (GNU_BUILD_ATTRIBUTE_TYPE_NUMERIC): Define. (GNU_BUILD_ATTRIBUTE_TYPE_STRING): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_TRUE): Define. (GNU_BUILD_ATTRIBUTE_TYPE_BOOL_FALSE): Define. (GNU_BUILD_ATTRIBUTE_VERSION): Define. (GNU_BUILD_ATTRIBUTE_STACK_PROT): Define. (GNU_BUILD_ATTRIBUTE_RELRO): Define. (GNU_BUILD_ATTRIBUTE_STACK_SIZE): Define. (GNU_BUILD_ATTRIBUTE_TOOL): Define. (GNU_BUILD_ATTRIBUTE_ABI): Define. (GNU_BUILD_ATTRIBUTE_PIC): Define. (NOTE_GNU_PROPERTY_SECTION_NAME): Define. (GNU_BUILD_ATTRS_SECTION_NAME): Define. (GNU_PROPERTY_STACK_SIZE): Define. (GNU_PROPERTY_NO_COPY_ON_PROTECTED): Define. (GNU_PROPERTY_X86_ISA_1_USED): Define. (GNU_PROPERTY_X86_ISA_1_NEEDED): Define. (GNU_PROPERTY_X86_ISA_1_486): Define. (GNU_PROPERTY_X86_ISA_1_586): Define. (GNU_PROPERTY_X86_ISA_1_686): Define. (GNU_PROPERTY_X86_ISA_1_SSE): Define. (GNU_PROPERTY_X86_ISA_1_SSE2): Define. (GNU_PROPERTY_X86_ISA_1_SSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSSE3): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_1): Define. (GNU_PROPERTY_X86_ISA_1_SSE4_2): Define. (GNU_PROPERTY_X86_ISA_1_AVX): Define. (GNU_PROPERTY_X86_ISA_1_AVX2): Define. (GNU_PROPERTY_X86_ISA_1_AVX512F): Define. (GNU_PROPERTY_X86_ISA_1_AVX512CD): Define. (GNU_PROPERTY_X86_ISA_1_AVX512ER): Define. (GNU_PROPERTY_X86_ISA_1_AVX512PF): Define. (GNU_PROPERTY_X86_ISA_1_AVX512VL): Define. (GNU_PROPERTY_X86_ISA_1_AVX512DQ): Define. (GNU_PROPERTY_X86_ISA_1_AVX512BW): Define. binutils* readelf.c (get_note_type): Add support for GNU_BUILD_NOTEs. (get_gnu_elf_note_type): Add support for GNU_PROPERTY_NOTEs. (decode_x86_isa): New function. (print_gnu_property_note): New function. (print_gnu_note): Handle GNU_PROPERTY_NOTEs. (print_gnu_build_attribute_description): New function. (print_gnu_build_attribute_name): New function. (process_note): Add support for GNU_BUILD_NOTEs. * objcopy.c (--merge-notes): New command line option. (copy_options): Add merge-notes. (copy_usage): Likewise. (is_merge_note_section): New function. (merge_gnu_build_notes): New function. (copy_object): Merge note sections if asked to do so. (skip_section): Add skip_copy parameter. Add support for skipping merged note sections. (copy_relocations_in_section): Update call to skip_section. (copy_section): Likewise. (copy_main): Add support for merge-notes option. * doc/binutils.texi: Document the new option to objcopy. * NEWS: Mention the new feature. * testsuite/binutils-all/note-2-32.d: New test. Checks note merging on 32-bit targets. * testsuite/binutils-all/note-2-32.s: New test source file. * testsuite/binutils-all/note-2-64.d: New test. Like note-2-32.d but for 64-bit targets. * testsuite/binutils-all/note-2-64.s: New test source file. * testsuite/binutils-all/objcopy.exp: Run the new test.	9 years ago
Nick Clifton	2425a30e40	Add support for locating separate debug info files via the build-id method. PR binutils/20876 bfd * opncls.c (find_separate_debug_file): Add include_dirs parameter. Only include the directory part of the bfd's filename in search paths if include_dirs is true. Add a couple of extra locations for looking for debug files. ( bfd_follow_gnu_debuglink): Update invocation of find_separate_debug_file. (bfd_follow_gnu_debugaltlink): Likewise. (get_build_id): New function: Finds the build-id of the given bfd. (get_build_id_name): New function: Computes the name of the separate debug info file for a bfd, based upon its build-id. (check_build_id_file): New function: Checks to see if a separate debug info file exists at the given location, and that its build-id matches that of the original bfd. (bfd_follow_build_id_debuglink): New function: Finds a separate debug info file for a given bfd by using the build-id method. * dwarf2.c (_bfd_dwarf2_slurp_debug_info): Try using the build-id method of locating a separate debug info file before using the debuglink method. * bfd-in2.h: Regenerate. binutils * NEWS: Mention the new feature. * testsuite/binutils-all/objdump.exp (test_build_id_debuglink): New proc to test the location of separate debug info files using the build-id method.	9 years ago
Alan Modra	2571583aed	Update year range in copyright notice of all files.	9 years ago
Tristan Gingold	9703a4ef4d	Add marker in NEWS files binutils/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. gas/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28. ld/ 2016-12-23 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.28.	9 years ago
Alan Modra	08dc996fed	PR20744, Incorrect PowerPC VLE relocs VLE 16A and 16D relocs were functionally swapped. PR 20744 include/ * opcode/ppc.h: Define VLE insns using 16A and 16D relocs. bfd/ * elf32-ppc.h (struct ppc_elf_params): Add vle_reloc_fixup field. * elf32-ppc.c: Include opcode/ppc.h. (ppc_elf_howto_raw): Correct dst_mask for R_PPC_VLE_LO16A, R_PPC_VLE_LO16D, R_PPC_VLE_HI16A, R_PPC_VLE_HI16D, R_PPC_VLE_HA16A, R_PPC_VLE_HA16D, R_PPC_VLE_SDAREL_LO16A, R_PPC_VLE_SDAREL_LO16D, R_PPC_VLE_SDAREL_HI16A, R_PPC_VLE_SDAREL_HI16D, R_PPC_VLE_SDAREL_HA16A, and R_PPC_VLE_SDAREL_HA16D relocs. (ppc_elf_link_hash_table_create): Update default_params init. (ppc_elf_vle_split16): Correct shift and mask. Add params. Report or fix insn/reloc mismatches. (ppc_elf_relocate_section): Pass input_section, offset and fixup to ppc_elf_vle_split16. binutils/ * NEWS: Mention PowerPC VLE relocation error. gas/ * config/tc-ppc.c: Delete VLE insn defines. (md_assemble): Swap use_a_reloc and use_d_reloc. * testsuite/gas/ppc/vle-reloc.d: Update. ld/ * emultempl/ppc32elf.em (params): Update initializer. Handle --vle-reloc-fixup command line arg.	10 years ago
Nick Clifton	df2c87b580	Add the ability for nm to display symbol version information. PR binutils/20751 * nm.c (with_symbol_versions): New local variable. (long_options): Add --with-symbol-versions. (usage): Mention --with-symbol-versions. (print_symbol): If with_symbol_versions is set then display the version information associated with the symbol. * NEWS: Mention the new feature. * doc/binutils.texi (nm): Document the new option. (objdump): Describe how symbol version information is displayed for dynamic symbol dumps. (readelf): Describe how symbol version information is displayed. * testsuite/binutils-all/nm.exp: Add a test of the new feature.	10 years ago
Claudiu Zissulescu	37fd5ef3ec	Add support to the ARC disassembler for selecting instruction classes. gas * testsuite/gas/arc/dsp.d: New file. * testsuite/gas/arc/dsp.s: Likewise. * testsuite/gas/arc/fpu.d: Likewise. * testsuite/gas/arc/fpu.s: Likewise. * testsuite/gas/arc/ext2op.d: Add specific disassembler option. * testsuite/gas/arc/ext3op.d: Likewise. * testsuite/gas/arc/tdpfp.d: Likewise. * testsuite/gas/arc/tfpuda.d: Likewise. opcodes * arc-dis.c (skipclass): New structure. (decodelist): New variable. (is_compatible_p): New function. (new_element): Likewise. (skip_class_p): Likewise. (find_format_from_table): Use skip_class_p function. (find_format): Decode first the extension instructions. (print_insn_arc): Select either ARCEM or ARCHS based on elf e_flags. (parse_option): New function. (parse_disassembler_options): Likewise. (print_arc_disassembler_options): Likewise. (print_insn_arc): Use parse_disassembler_options function. Proper select ARCv2 cpu variant. * disassemble.c (disassembler_usage): Add ARC disassembler options. binutils* doc/binutils.texi (objdump): Add ARC disassembler options. * testsuite/binutils-all/arc/dsp.s: New file. * testsuite/binutils-all/arc/objdump.exp: Likewise. include * dis-asm.h: Declare print_arc_disassembler_options.	10 years ago
Andrew Burgess	d3e5f6c8f1	objcopy/strip: Add option --remove-relocations=SECTIONPATTERN The objcopy and strip tools make use of the bfd library to manipulate the state of the input file (to produce an output file). Within the input file (for ELF at least), relocations are held within a section, and so, if the user wanted to remove the relocations, but keep the section to which the relocations would have been applied, it is tempting to think that specifying the name of a relocation section to objcopy's --remove-section option might do what you want, for example: objcopy --remove-section=.rela.text input.elf output.elf However, this does not work. The reason is that when the input file is loaded, relocations are not managed as sections, but are, instead, loaded as data associated with the section to which the relocations would be applied. In our example above the relocations in '.rela.text' are held as data on the section '.text' once 'input.elf' is loaded. One task that objcopy and strip do is copy the relocations from the input file to the output file if the section is also being copied from the input file to the output file. This commit adds a new command line option for objcopy and strip, --remove-relocations, which can be used to remove the relocations, while keeping the section that the relocations would have been applied to, for example: objcopy --remove-relocations=.text input.elf output.elf in this case the section '.text' will appear in both 'input.elf' and 'output.elf', but any relocations in 'input.elf' that apply to '.text' will not be present in 'output.elf'. I have also added a special case to the handling of --remove-section that spots if a user tries to remove a relocation section (currently this is done by spotting the '.rela.' or '.rel.' prefix) and forwards the request to --remove-relocations. As with --remove-section and --only-section the --remove-relocations option supports the '!' prefix on the section-patterns it takes to allow for sections to be specifically not matched. There are tests for all the new functionality. binutils/ChangeLog: * doc/binutils.texi (objcopy): Document 'remove-relocations'. (strip): Likewise. * objcopy.c (SECTION_CONTEXT_REMOVE_RELOCS): Define. (enum command_line_switch): Add 'OPTION_REMOVE_RELOCS'. (struct option strip_options): Add 'remove-relocations'. (struct option copy_options): Likewise. (copy_usage): Likewise. (strip_usage): Likewise. (handle_remove_relocations_option): New function. (discard_relocations): New function. (handle_remove_section_option): New function. (copy_relocations_in_section): Use discard_relocations. (strip_main): Use handle_remove_section_option for 'remove-section', and handle 'remove-relocations' option. (copy_main): Likewise. * testsuite/binutils-all/objcopy.exp: Run new tests. * testsuite/binutils-all/remove-relocs-01.d: New file. * testsuite/binutils-all/remove-relocs-01.s: New file. * testsuite/binutils-all/remove-relocs-02.d: New file. * testsuite/binutils-all/remove-relocs-03.d: New file. * testsuite/binutils-all/remove-relocs-04.d: New file. * testsuite/binutils-all/remove-relocs-05.d: New file. * testsuite/binutils-all/remove-relocs-06.d: New file.	11 years ago
Andrew Burgess	e511c9b19f	objcopy/strip: Allow section patterns starting with '!'. For symbol matching, prefixing a pattern with '!' will indicate a non-matching pattern, however, this is not the case for section patterns. As a result it is not possible to say "apply this action to all sections except ...". With this commit the objcopy and strip tools now support '!' prefix for section patterns, so we can say: objcopy --remove-section="" --remove-section="!.text" Which will remove all sections, except those matching the pattern '.text'. binutils/ChangeLog: objcopy.c (find_section_list): Handle section patterns starting with '!' being a non-matching pattern. * doc/binutils.texi (objcopy): Give example of using '!' with --remove-section and --only-section. (strip): Give example of using '!' with --remove-section. * testsuite/binutils-all/data-sections.s: New file. * testsuite/binutils-all/only-section-01.d: New file. * testsuite/binutils-all/remove-section-01.d: New file. * testsuite/binutils-all/objcopy.exp: Run new tests. * NEWS: Mention new feature.	11 years ago
Tristan Gingold	96a84ea350	Add marker for 2.27 branch. binutils/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. gas/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27. ld/ 2016-07-01 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.27.	10 years ago
H.J. Lu	e6cc316af9	Enable 64-bit archives in ar and ranlib Since existing ld and gold support the 64-bit (MIPS) ELF archives, we can use the 64-bit (MIPS) ELF archives as 64-bit archives. Since the plugin target is used to create archive in plugin-enabled ar, we need a way to enable 64-bit archives in the plugin target. This patch adds --enable-64-bit-archive to bfd to force 64-bit archives in ar and ranlib. Since both 64-bit MIPS and s390 ELF targets currently use 64-bit archives, 64-bit archives are enabled by default for them. 64-bit archive is generated automatically if the archive is too big. Tested on Linux/x86 and Linux/x86-64 with existing ld and gold. bfd/ PR binutils/14625 * archive.c (bfd_slurp_armap): Replace bfd_elf64_archive_slurp_armap with _bfd_archive_64_bit_slurp_armap. (bsd_write_armap): Call _bfd_archive_64_bit_write_armap if BFD64 is defined and the archive is too big. (coff_write_armap): Likewise. * archive64.c (bfd_elf64_archive_slurp_armap): Renamed to ... (_bfd_archive_64_bit_slurp_armap): This. (bfd_elf64_archive_write_armap): Renamed to ... (_bfd_archive_64_bit_write_armap): This. * configure.ac: Add --enable-64-bit-archive. (want_64_bit_archive): New. Set to true by default for 64-bit MIPS and s390 ELF targets. (USE_64_BIT_ARCHIVE): New AC_DEFINE. * config.in: Regenerated. * configure: Likewise. * elf64-mips.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elf64-s390.c (bfd_elf64_archive_functions): Removed. (bfd_elf64_archive_slurp_armap): Likewise. (bfd_elf64_archive_write_armap): Likewise. (bfd_elf64_archive_slurp_extended_name_table): Likewise. (bfd_elf64_archive_construct_extended_name_table): Likewise. (bfd_elf64_archive_truncate_arname): Likewise. (bfd_elf64_archive_read_ar_hdr): Likewise. (bfd_elf64_archive_write_ar_hdr): Likewise. (bfd_elf64_archive_openr_next_archived_file): Likewise. (bfd_elf64_archive_get_elt_at_index): Likewise. (bfd_elf64_archive_generic_stat_arch_elt): Likewise. (bfd_elf64_archive_update_armap_timestamp): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined and bfd_elfNN_archive_functions isn't defined. (TARGET_LITTLE_SYM): Likewise. * libbfd-in.h (_bfd_archive_64_bit_slurp_armap): New prototype. (_bfd_archive_64_bit_write_armap): Likewise. (_bfd_archive_64_bit_slurp_extended_name_table): New macro. (_bfd_archive_64_bit_construct_extended_name_table): Likewise. (_bfd_archive_64_bit_truncate_arname): Likewise. (_bfd_archive_64_bit_read_ar_hdr): Likewise. (_bfd_archive_64_bit_write_ar_hdr): Likewise. (_bfd_archive_64_bit_openr_next_archived_file): Likewise. (_bfd_archive_64_bit_get_elt_at_index): Likewise. (_bfd_archive_64_bit_generic_stat_arch_elt): Likewise. (_bfd_archive_64_bit_update_armap_timestamp): Likewise. * libbfd.h: Regenerated. * plugin.c (plugin_vec): Use _bfd_archive_64_bit on BFD_JUMP_TABLE_ARCHIVE if USE_64_BIT_ARCHIVE is defined. binutils/ PR binutils/14625 * NEWS: Mention --enable-64-bit-archive.	10 years ago
H.J. Lu	b8871f357f	Properly implement STT_COMMON The BFD configure option, --enable-elf-stt-common, can't be to used to verify STT_COMMON implementation with the normal binutils build. Instead, this patch removes it from BFD. It adds --elf-stt-common=[no\|yes] to ELF assembler/objcopy and adds -z common/-z nocommon to ld. A configure option, --enable-elf-stt-common, is added to gas to specify whether ELF assembler should generate common symbols with the STT_COMMON type by default. Since BSF_KEEP_G is never used, it is renamed to BSF_ELF_COMMON for ELF common symbols. bfd/ PR ld/19645 * bfd.c (bfd): Change flags to 20 bits. (BFD_CONVERT_ELF_COMMON): New. (BFD_USE_ELF_STT_COMMON): Likewise. (BFD_FLAGS_SAVED): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. (BFD_FLAGS_FOR_BFD_USE_MASK): Likewise. * configure.ac: Remove --enable-elf-stt-common. * elf.c (swap_out_syms): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. * elfcode.h (elf_slurp_symbol_table): Set BSF_ELF_COMMON for STT_COMMON. * elflink.c (bfd_elf_link_mark_dynamic_symbol): Also check STT_COMMON. (elf_link_convert_common_type): New function. (elf_link_output_extsym): Choose STT_COMMON or STT_OBJECT for common symbol depending on BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON. Set sym.st_info after sym.st_shndx. * elfxx-target.h (TARGET_BIG_SYM): Add BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON to object_flags. (TARGET_LITTLE_SYM): Likewise. * syms.c (BSF_KEEP_G): Renamed to ... (BSF_ELF_COMMON): This. * bfd-in2.h: Regenerated. * config.in: Likewise. * configure: Likewise. binutils/ PR ld/19645 * NEWS: Mention --elf-stt-common= for objcopy. * doc/binutils.texi: Document --elf-stt-common= for objcopy. * objcopy.c (do_elf_stt_common): New. (command_line_switch): Add OPTION_ELF_STT_COMMON. (copy_options): Add --elf-stt-common=. (copy_usage): Add --elf-stt-common=. (copy_object): Also check do_elf_stt_common for ELF targets. (copy_file): Handle do_elf_stt_common. (copy_main): Handle OPTION_ELF_STT_COMMON. * readelf.c (apply_relocations): Support STT_COMMON. * testsuite/binutils-all/common-1.s: New file. * testsuite/binutils-all/common-1a.d: Likewise. * testsuite/binutils-all/common-1b.d: Likewise. * testsuite/binutils-all/common-1c.d: Likewise. * testsuite/binutils-all/common-1d.d: Likewise. * testsuite/binutils-all/common-1e.d: Likewise. * testsuite/binutils-all/common-1f.d: Likewise. * testsuite/binutils-all/common-2.s: Likewise. * testsuite/binutils-all/common-2a.d: Likewise. * testsuite/binutils-all/common-2b.d: Likewise. * testsuite/binutils-all/common-2c.d: Likewise. * testsuite/binutils-all/common-2d.d: Likewise. * testsuite/binutils-all/common-2e.d: Likewise. * testsuite/binutils-all/common-2f.d: Likewise. * testsuite/binutils-all/objcopy.exp (objcopy_test_elf_common_symbols): New proc. Run objcopy_test_elf_common_symbols for ELF targets gas/ PR ld/19645 * NEWS: Mention --enable-elf-stt-common and --elf-stt-common= for ELF assemblers. * as.c (flag_use_elf_stt_common): New. (show_usage): Add --elf-stt-common=. (option_values): Add OPTION_ELF_STT_COMMON. (std_longopts): Add --elf-stt-common=. (parse_args): Handle --elf-stt-common=. * as.h (flag_use_elf_stt_common): New. * config.in: Regenerated. * configure: Likewise. * configure.ac: Add --enable-elf-stt-common and define DEFAULT_GENERATE_ELF_STT_COMMON. * gas/write.c (write_object_file): Set BFD_CONVERT_ELF_COMMON and BFD_USE_ELF_STT_COMMON if flag_use_elf_stt_common is set. * doc/as.texinfo: Document --elf-stt-common=. * testsuite/gas/elf/common3.s: New file. * testsuite/gas/elf/common3a.d: Likewise. * testsuite/gas/elf/common3b.d: Likewise. * testsuite/gas/elf/common4.s: Likewise. * testsuite/gas/elf/common4a.d: Likewise. * testsuite/gas/elf/common4b.d: Likewise. * testsuite/gas/i386/dw2-compress-3b.d: Likewise. * testsuite/gas/i386/dw2-compressed-3b.d: Likewise. * testsuite/gas/elf/elf.exp: Run common3a, common3b, common4a and common4b. * testsuite/gas/i386/dw2-compress-3.d: Renamed to ... * testsuite/gas/i386/dw2-compress-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/dw2-compressed-3.d: Renamed to ... * testsuite/gas/i386/dw2-compressed-3a.d: This. Pass --elf-stt-common=no to as. * testsuite/gas/i386/i386.exp: Run dw2-compress-3a, dw2-compress-3b, dw2-compressed-3a and dw2-compressed-3b instead of dw2-compress-3 and dw2-compressed-3. include/ PR ld/19645 * bfdlink.h (bfd_link_elf_stt_common): New enum. (bfd_link_info): Add elf_stt_common. ld/ PR ld/19645 * NEWS: Mention -z common/-z nocommon for ELF targets. * emultempl/elf32.em (gld${EMULATION_NAME}_handle_option): Handle -z common and -z nocommon. * ld.texinfo: Document -z common/-z nocommon. * lexsup.c (elf_shlib_list_options): Add -z common/-z nocommon. * testsuite/ld-elf/tls_common.exp: Test --elf-stt-common=no and --elf-stt-common=yes with assembler. * testsuite/ld-elfcomm/common-1.s: New file. * testsuite/ld-elfcomm/common-1a.d: Likewise. * testsuite/ld-elfcomm/common-1b.d: Likewise. * testsuite/ld-elfcomm/common-1c.d: Likewise. * testsuite/ld-elfcomm/common-1d.d: Likewise. * testsuite/ld-elfcomm/common-1e.d: Likewise. * testsuite/ld-elfcomm/common-1f.d: Likewise. * testsuite/ld-elfcomm/common-2.s: Likewise. * testsuite/ld-elfcomm/common-2a.d: Likewise. * testsuite/ld-elfcomm/common-2b.d: Likewise. * testsuite/ld-elfcomm/common-2c.d: Likewise. * testsuite/ld-elfcomm/common-2d.d: Likewise. * testsuite/ld-elfcomm/common-2e.d: Likewise. * testsuite/ld-elfcomm/common-2f.d: Likewise. * testsuite/ld-elfcomm/common-3a.rd: Likewise. * testsuite/ld-elfcomm/common-3b.rd: Likewise. * testsuite/ld-i386/pr19645.d: Likewise. * testsuite/ld-i386/pr19645.s: Likewise. * testsuite/ld-x86-64/largecomm-1.s: Likewise. * testsuite/ld-x86-64/largecomm-1a.d: Likewise. * testsuite/ld-x86-64/largecomm-1b.d: Likewise. * testsuite/ld-x86-64/largecomm-1c.d: Likewise. * testsuite/ld-x86-64/largecomm-1d.d: Likewise. * testsuite/ld-x86-64/largecomm-1e.d: Likewise. * testsuite/ld-x86-64/largecomm-1f.d: Likewise. * testsuite/ld-x86-64/pr19645.d: Likewise. * testsuite/ld-x86-64/pr19645.s: Likewise. * testsuite/ld-elfcomm/elfcomm.exp: Test --elf-stt-common=yes with assembler. (assembler_generates_commons): Removed. Run -z common/-z nocommon tests. Run .d tests. testsuite/ld-i386/i386.exp: Run pr19645. * testsuite/ld-x86-64/x86-64.exp: Likewise. * testsuite/ld-x86-64/dwarfreloc.exp: Test --elf-stt-common with assembler. Test STT_COMMON with readelf.	10 years ago
Alan Modra	6f2750feaf	Copyright update for binutils	10 years ago
Tristan Gingold	7feec526b7	Add markers for release 2.26 binutils/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. gas/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26. ld/ 2015-11-13 Tristan Gingold <gingold@adacore.com> * NEWS: Add marker for 2.26.	11 years ago
Ronald Hoogenbllon	2b35fb28f3	Add ability for objcopy to insert new symbols into a binary. PR binutils/19104 binutils * objcopy.c (command_line_switch): Add OPTION_ADD_SYMBOL. (copy_options): Add add-symbol. (copy_usage): Likewise. (parse_symflags): New function. (need_sym_before): New function. (create_new_symbol): New function. (filter_symbols): Add code to insert new symbols. (copy_main): Process OPTION_ADD_SYMBOL. * doc/binutils.texi: Document new feature. * NEWS: Add note about the new feature. tests * binutils-all/add-symbol.d: New test. * binutils-all/objcopy.exp: Run the new test.	11 years ago
Nick Clifton	886a250647	New ARC implementation. bfd * archures.c: Remove support for older ARC. Added support for new ARC cpus (ARC600, ARC601, ARC700, ARCV2). * bfd-in2.h: Likewise. * config.bfd: Likewise. * cpu-arc.c: Likewise. * elf32-arc.c: Totally changed file with a refactored inplementation of the ARC port. * libbfd.h: Added ARC specific relocation types. * reloc.c: Likewise. gas * config/tc-arc.c: Revamped file for ARC support. * config/tc-arc.h: Likewise. * doc/as.texinfo: Add new ARC options. * doc/c-arc.texi: Likewise. ld * configure.tgt: Added target arc--elf and arc--linux-uclibc. emulparams/arcebelf_prof.sh: New file * emulparams/arcebelf.sh: Likewise. * emulparams/arceblinux_prof.sh: Likewise. * emulparams/arceblinux.sh: Likewise. * emulparams/arcelf_prof.sh: Likewise. * emulparams/arcelf.sh: Likewise. * emulparams/arclinux_prof.sh: Likewise. * emulparams/arclinux.sh: Likewise. * emulparams/arcv2elfx.sh: Likewise. * emulparams/arcv2elf.sh: Likewise. * emultempl/arclinux.em: Likewise. * scripttempl/arclinux.sc: Likewise. * scripttempl/elfarc.sc: Likewise. * scripttempl/elfarcv2.sc: Likewise * Makefile.am: Add new ARC emulations. * Makefile.in: Regenerate. * NEWS: Mention the new feature. opcodes * arc-dis.c: Revamped file for ARC support * arc-dis.h: Likewise. * arc-ext.c: Likewise. * arc-ext.h: Likewise. * arc-opc.c: Likewise. * arc-fxi.h: New file. * arc-regs.h: Likewise. * arc-tbl.h: Likewise. binutils * readelf.c (get_machine_name): Remove A5 reference. Add ARCompact and ARCv2. (get_machine_flags): Handle EM_ARCV2 and EM_ARCOMPACT. (guess_is_rela): Likewise. (dump_relocations): Likewise. (is_32bit_abs_reloc): Likewise. (is_16bit_abs_reloc): Likewise. (is_none_reloc): Likewise. * NEWS: Mention the new feature. include * dis-asm.h (arc_get_disassembler): Correct declaration. * arc-reloc.def: Macro file with definition of all relocation types. * arc.h: Changed macros for the newly supported ARC cpus. Altered enum defining the supported relocations. * common.h: Changed EM_ARC_A5 definition to EM_ARC_COMPACT. Added macro for EM_ARC_COMPACT2. * arc-func.h: New file. * arc.h: Likewise.	11 years ago
Erik Ackermann	55edd97b4b	Adds an option to the strings program to specify a separator between the emitted pieces of text. * strings.c: Add -s/--output-separator option to specify custom separator string. * NEWS: Mention the new feature. * doc/binutils.text (strings): Document the new command line option.	11 years ago
H.J. Lu	3aade68889	Remove trailing spaces in binutils	11 years ago

1 2 3 4

172 Commits (2376c3702e43ad8a717d80888b34e1e7eaeacaa8)