the page man title.
* doc/Makefile.in: Rebuild.
* doc/as.texinfo: Do not put man SEEALSO in document;
Use @command for commands, @option for options; Reorganize usage
to clearly identify target specific options.
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.in (mips-*-netbsd*): Add support for target.
* configure: Regenerate.
[ gas/testsuite/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* gas/mips/mips.exp (svr4pic): Set if target is *-*-netbsd*.
(aout): Don't set if *-*-netbsd*.
[ ld/ChangeLog ]
2001-11-04 Chris Demetriou <cgd@broadcom.com>
* configure.tgt (mips*el-*-netbsd*, mips*-*-netbsd*):
Add support for targets.
(insns): Re-arrange instructions by archtitecture. Pld instruction
is part of ARMv5E.
(tinsns): blx and bkpt are part of ARMv5T.
(do_fp_{ctrl,ldst,ldstm,dyadic,monadic,cmp,from_reg,to_reg}): Rename
to do_fpa_*. All callers changed.
* tc-arm.c (insns): Add two temporary instructions to handle
ldrd/strd.
2001-10-31 Chris Demetriou <cgd@demetriou.com>
* elf32-mips.c (_bfd_mips_elf_hi16_reloc): Handle PC-relative
relocations properly.
[ gas/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* config/tc-mips.c (HAVE_32BIT_ADDRESSES): If compiling embedded
PIC code, assume pointers the same size as GPRs.
(macro): In M_LA_AB handling for embedded PIC code, support
"la $treg,foo-bar($breg)". In load/store handling
(label ld_st) support "<op> $treg,<sym>-<local_sym>($breg)"
which is used by the compiler for switch statements.
In load/store double multi-instruction macro handling
(label ldd_std) add a comment that no special handling
is currently done for embedded PIC.
(mips_ip): In 'o' (16-bit offset) case, only accept 16
bit offsets.
[ gas/testsuite/ChangeLog ]
2001-10-31 Chris Demetriou <cgd@broadcom.com>
* gas/mips/empic.s: Undo damage inflicted on 2000-12-02.
* gas/mips/empic.d: Likewise.
* gas/mips/elempic.d: Likewise (it was copied into other files).
* gas/mips/telempic.d: Likewise.
* gas/mips/tempic.d: Likewise.
* gas/mips/empic2.s: New test to check new 'la' and 'lw' (and
related ops) syntax, test loads with large offsets.
* gas/mips/emcic2.d: Likewise.
* gas/mips/mips.exp: Run the new test on ELF platforms.
* tc-arm.c (ARM_EXT_LONGMUL, ARM_EXT_HALFWORD, ARM_EXT_THUMB): Delete.
(ARM_2UP, ARM_ALL, ARM_3UP, ARM_6UP): Delete.
(FPU_CORE, FPU_FPA10, FPA_FPA11, FPU_ALL, FPA_MEMMULTI): Delete.
(ARM_EXT_V{1,2,2S,3,3M,4,4T,5T,5ExP}): New defines.
(ARM_EXT_V{5,5E}): Synchronize with above.
(ARM_ARCH_V*): Define a complete set in terms of above features.
(ARM_{1,2,3,250,6,7,8,9,STRONG}): Define in terms of architecture.
(FPU_FPA_EXT_V[12]): Define.
(FPU_ARCH_FPE, FPU_ARCH_FPA): Define in terms of above.
(FPU_ANY): Define.
(FPU_DEFAULT): Default to FPA.
(CPU_DEFAULT): For XScale, this is now just ARM_ARCH_XSCALE; for
Thumb, this is now ARM_ARCH_V5T.
(insns): Rework for new feature defines.
(tinsns): Likewise.
(opcode_select, do_ldst, md_begin, md_parse_option): Likewise.
(ppc_size): Select PPC_OPCODE_64 if 64 bit.
(md_begin): Don't set ppc_size here.
(ppc_target_format): Test ppc_size as well as BFD_DEFAULT_TARGET_SIZE.
(md_shortopts): Constify.
(md_longopts): Likewise.
(md_longopts_size): Likewise.
(ppc_elf_suffix): Only allow 64-bit relocs when ppc_size specifies
64-bit opcodes.
(ppc_machine): Explain why this function is a nop.
* config/tc-ppc.c (md_parse_option): New -m7410, -m7450 and -m7455
flags, equivalent to -m7400. New -maltivec to enable AltiVec
instructions. New -mbook64 and -mbooke/-mbooke32 flags to enable
64-bit and 32-bit BookE support, respectively. Change -m403 and
-m405 to set PPC403 option.
(md_show_usage): Adjust for new options.
* doc/all.texi: Set PPC.
* doc/as.texinfo: Add PPC support and pull in c-ppc.texi.
* doc/c-ppc.texi: New file.
* doc/Makefile.am (CPU_DOCS): Add c-ppc.texi.
* doc/Makefile.in: Regenerate.
[gas/testsuite/ChangeLog]
* gas/ppc/booke.s: New test for Motorola BookE.
* gas/ppc/booke.d: New file.
* gas/ppc/ppc.exp: Test booke.s.
[include/opcode/ChangeLog]
* ppc.h (PPC_OPCODE_BOOKE, PPC_OPCODE_403): New opcode flags for
BookE and PowerPC403 instructions.
[opcodes/ChangeLog]
* ppc-opc.c (insert_de, extract_de, insert_des, extract_des): New
instruction field instruction/extraction functions for new BookE
DE form instructions.
(CT): New macro for CT field in an X form instruction.
(DE, DES, DEO, DE_MASK): New macros for DE/DES fields in DE form
instructions.
(PPC64): Don't include PPC_OPCODE_PPC.
(403): New opcode macro for PPC403 processors.
(BOOKE): New opcode macro for BookE processors.
(bce, bcel, bcea, bcela, bclre, bclrel: New BookE instructions.
(bcctre, bcctrel, be, bel, bea, bela, icbt, icbte, lwzxe): Likewise.
(dcbste, lwzuxe, luxe, dcbfe, lbzxe, lwarxe, lbzuxe): Likewise.
(stwcxe, stwxe, stxe, stwuxe, stuxe, stbxe, dcbtste, stbuxe): Likewise.
(mfapidi, dcbte, lhzxe, lhzuxe, lhaxe, lhauxe, subfe64): Likewise.
(subfeo64, adde64, addeo64, sthxe, sthuxe, subfze64): Likewise.
(subfzeo64, addze64, addzeo64, dcbie, subfme64, subfmeo64): Likewise.
(addme64, addmeo64, stdcxe., mcrxr64, lwbrxe, lfsxe, lfsuxe): Likewise.
(lfdxe, lfduxe, stwbrxe, stfsxe, stfsuxe, stfdxe, dcbae): Likewise.
(stfduxe, tlbivax, tlbivaxe, lhbrxe, ldxe, lduxe, tlbsx): Likewise.
(tlbsxe, sthbrxe, stdxe, stduxe, icbie, stfiwxe, dcbze, lbze): Likewise.
(lbzue, ldue, lhze, lhzue, lhae, lhaue, lwze, lwzue): Likewise.
(stbe, stbue, sthe, sthue, stwe, stwue, lfse, lfsue, lfde): Likewise.
(lfdue, stde, stdue, stfse, stfsue, stfde, stfdue): Likewise.
* ppc-dis.c (print_insn_big_powerpc, print_insn_little_powerpc): Look
for a disassembler option of `booke', `booke32' or `booke64' to enable
BookE support in the disassembler.
(mips_cpreturn_register): Likewise.
(mips_gp_register): Likewise.
(s_cpsetup): New function prototype.
(s_cplocal): Likewise.
(s_cpreturn): Likewise.
(s_gpvalue): Likewise.
(mips_pseudo_table): Add .cpsetup, .cplocal, .cpreturn, .gpvalue
pseudo-ops.
(macro): Don't warn about .cprestore for NewABI.
(md_pcrel_from): Code cleanup.
(mips_force_relocation): Force output of some NewABI relocations even
without a defined symbol.
(s_cpload): Ignore .cpload for NewABI.
(s_cpsetup): Handle .cpsetup.
(s_cplocal): Handle .cplocal.
(s_cprestore): Ignore .cprestore for NewABI.
(s_cpreturn): Handle .cpreturn.
(s_gpvalue): Handle .gpvalue.
(s_cpadd): Ignore .cpadd for NewABI.
(nopic_need_relax): Take g_switch_value into account as gp
optimization.
(tc_gen_reloc): Don't handle BFD_RELOC_MIPS_{CALL,GOT}* for NewABI.
(small_ex_type): Named this enum, more return values for
my_getSmallExpression.
(mips_ip): Allow SPC and HT between arguments. Handle some NewABI
triple relocations. Protect some parts with ifdef OBJ_ELF.
(percent_op_match): New struct, lookup table for %some_reloc().
(my_getSmallParser): New function, parses nested percent_ops also.
(my_getSmallExpression): Rewite to support nested percent_ops.
(load_address): Support both 32- and 64-bit addresses.
(macro): Call load_register correctly. Expand 64-bit loads ans stores.
(macro2): Call load_address correctly.
throughout file.
(obj_elf_change_section): Rename "group" to "group_name".
(obj_elf_section): Likewise.
(elf_frob_file): Don't use sec->lineno for SHT_GROUP section to store
first member section; Instead use elf_next_in_group.
Set elf_section_data group from it. Warn if group name changed.
(obj_elf_parse_section_letters): Parse 'G' too.
(obj_elf_section): Parse group name.
(struct group_list): New.
(build_group_lists): New function.
(elf_frob_file): Create SEC_GROUP section(s).
* config/obj-elf.c: (elf_copy_symbol_attributes): Zap trailing
whitespace.
capitalise, no final period or newline, don't say "ignoring" for
as_bad messages. In some cases, change the wording to that used
elsewhere for similar messages.
(obj_elf_section_name): New function, split out from ..
(obj_elf_section): .. here. Correctly mask off SHF_MERGE if
entsize not specified.
Stephane Carrez
Thiemo Seufer
Eric Christopher
Martin Schwidefsky
Chris Demetriou
Nick Clifton
Richard Earnshaw
Alan Modra
H.J. Lu
Hans-Peter Nilsson
Matthew Green
Kazu Hirata
Aldy Hernandez
Tom Rix
Jakub Jelinek
Alexandre Oliva