binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Przemyslaw Wirkus	12e35da62f	This patch introduces ETMv4 (Embedded Trace Macrocell) system registers for the AArch64 architecture. gas * testsuite/gas/aarch64/etm-ro-invalid.d: New test. * testsuite/gas/aarch64/etm-ro-invalid.l: New test. * testsuite/gas/aarch64/etm-ro-invalid.s: New test. * testsuite/gas/aarch64/etm-ro.s: New test. * testsuite/gas/aarch64/etm-wo-invalid.d: New test. * testsuite/gas/aarch64/etm-wo-invalid.l: New test. * testsuite/gas/aarch64/etm-wo-invalid.s: New test. * testsuite/gas/aarch64/etm-wo.s: New test. * testsuite/gas/aarch64/etm.s: New test. * testsuite/gas/aarch64/sysreg.d: system register s2_1_c0_c3_0 disassembled now to trcstatr. opcodes * aarch64-opc.c: Added ETMv4 system registers TRCACATRn, TRCACVRn, TRCAUTHSTATUS, TRCAUXCTLR, TRCBBCTLR, TRCCCCTLR, TRCCIDCCTLR0, TRCCIDCCTLR1, TRCCIDCVRn, TRCCIDR0, TRCCIDR1, TRCCIDR2, TRCCIDR3, TRCCLAIMCLR, TRCCLAIMSET, TRCCNTCTLRn, TRCCNTRLDVRn, TRCCNTVRn, TRCCONFIGR, TRCDEVAFF0, TRCDEVAFF1, TRCDEVARCH, TRCDEVID, TRCDEVTYPE, TRCDVCMRn, TRCDVCVRn, TRCEVENTCTL0R, TRCEVENTCTL1R, TRCEXTINSELR, TRCIDR0, TRCIDR1, TRCIDR2, TRCIDR3, TRCIDR4, TRCIDR5, TRCIDR6, TRCIDR7, TRCIDR8, TRCIDR9, TRCIDR10, TRCIDR11, TRCIDR12, TRCIDR13, TRCIMSPEC0, TRCIMSPECn, TRCITCTRL, TRCLAR WOTRCLSR, TRCOSLAR WOTRCOSLSR, TRCPDCR, TRCPDSR, TRCPIDR0, TRCPIDR1, TRCPIDR2, TRCPIDR3, TRCPIDR4, TRCPIDR[5,6,7], TRCPRGCTLR, TRCP,CSELR, TRCQCTLR, TRCRSCTLRn, TRCSEQEVRn, TRCSEQRSTEVR, TRCSEQSTR, TRCSSCCRn, TRCSSCSRn, TRCSSPCICRn, TRCSTALLCTLR, TRCSTATR, TRCSYNCPR, TRCTRACEIDR, TRCTSCTLR, TRCVDARCCTLR, TRCVDCTLR, TRCVDSACCTLR, TRCVICTLR, TRCVIIECTLR, TRCVIPCSSCTLR, TRCVISSCTLR, TRCVMIDCCTLR0, TRCVMIDCCTLR1 and TRCVMIDCVRn.	6 years ago
Przemyslaw Wirkus	47e1f9deaa	This patch adds support for Cortex-X1 gas * config/tc-aarch64.c: (aarch64_cpus): Add Cortex-X1. * doc/c-aarch64.texi: Document -mcpu=cortex-x1.	6 years ago
Przemyslaw Wirkus	3454861d89	This patch introduces ETE (Embedded Trace Extension) system registers for the AArch64 architecture. gas * testsuite/gas/aarch64/ete.d: New test. * testsuite/gas/aarch64/ete.s: New test. opcodes * aarch64-opc.c: Add ETE system registers TRCEXTINSELR<0-3> and TRCRSR.	6 years ago
Przemyslaw Wirkus	1ff8e40105	This patch introduces TRBE (Trace Buffer Extension) system registers for the AArch64 architecture. gas * testsuite/gas/aarch64/trbe-invalid.d: New test. * testsuite/gas/aarch64/trbe-invalid.l: New test. * testsuite/gas/aarch64/trbe-invalid.s: New test. * testsuite/gas/aarch64/trbe.d: New test. * testsuite/gas/aarch64/trbe.s: New test. opcodes * aarch64-opc.c: Add TRBE system registers TRBIDR_EL1 , TRBBASER_EL1 , TRBLIMITR_EL1 , TRBMAR_EL1 , TRBPTR_EL1, TRBSR_EL1 and TRBTRG_EL1.	6 years ago
Alex Coplan	9bede61ce5	arm: Add missing Neoverse V1 feature This simple follow-on patch adds a feature bit (FP16) that was missing from the initial Neoverse V1 support. gas/ChangeLog: * config/tc-arm.c (arm_cpus): Add FP16 to Neoverse V1.	6 years ago
Alex Coplan	c769fd6a32	aarch64: Neoverse V1 tweaks This simple follow-on patch groups the Neoverse cores together and adds a missing feature bit (F16) to the entry for Neoverse V1. gas/ChangeLog: * config/tc-aarch64.c (aarch64_cpus): Group Neoverse cores together, add missing F16 bit to Neoverse V1.	6 years ago
Alan Modra	f243e458cd	PR26656 testcases * testsuite/ld-powerpc/tlsget.d, * testsuite/ld-powerpc/tlsget.s, * testsuite/ld-powerpc/tlsget.wf, * testsuite/ld-powerpc/tlsget2.d. * testsuite/ld-powerpc/tlsget2.wf: New testcases. * testsuite/ld-powerpc/powerpc.exp: Run them.	6 years ago
Tom Tromey	2c72d5e58a	Rewrite tui_puts This rewrites tui_puts. It now writes as many bytes as possible in a call to waddnstr, letting curses handle multi-byte sequences properly. Note that tui_puts_internal remains. It is needed to handle computing the start line of the readline prompt, which is difficult to do properly in the case where redisplaying can also cause the command window to scroll. This might be possible to implement by reverting to single "character" output, by using mbsrtowcs for its side effects to find character boundaries in the input. I have not attempted this. gdb/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> PR tui/25342: * tui/tui-io.c (tui_puts): Rewrite. Move earlier.	6 years ago
Tom Tromey	35a982372f	Use ISCNTRL in tui_copy_source_line This changes tui_copy_source_line to use ISCNTRL. This lets it work more nicely with UTF-8 input. Note that this still won't work for stateful multi-byte encodings; for that much more work would be required. However, I think this patch does not make gdb any worse in this scenario. gdb/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> PR tui/25342: * tui/tui-winsource.c (tui_copy_source_line): Use ISNCTRL.	6 years ago
Tom Tromey	9e820dec13	Use a curses pad for source and disassembly windows This changes the TUI source and disassembly windows to use a curses pad for their text. This is an important step toward properly handling non-ASCII characters, because it makes it easy to scroll horizontally without needing gdb to also understand multi-byte character boundaries -- this can be wholly delegated to curses. Horizontal scrolling is probably also faster now, because no re-rendering is required. gdb/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> * unittests/tui-selftests.c: Update. * tui/tui-winsource.h (struct tui_source_window_base) <extra_margin, show_line_number, refresh_pad>: New methods. <m_max_length, m_pad>: New members. (tui_copy_source_line): Update. * tui/tui-winsource.c (tui_copy_source_line): Remove line_no, first_col, line_width, ndigits parameters. Add length. (tui_source_window_base::show_source_line): Write to pad. Line number now 0-based. (tui_source_window_base::refresh_pad): New method. (tui_source_window_base::show_source_content): Write to pad. Call refresh_pad. (tui_source_window_base::do_scroll_horizontal): Call refresh_pad, not refill. (tui_source_window_base::update_exec_info): Call show_line_number. * tui/tui-source.h (struct tui_source_window) <extra_margin>: New method. <m_digits>: New member. * tui/tui-source.c (tui_source_window::set_contents): Set m_digits and m_max_length. (tui_source_window::show_line_number): New method. * tui/tui-io.h (tui_puts): Fix comment. * tui/tui-disasm.c (tui_disasm_window::set_contents): Set m_max_length.	6 years ago
Tom Tromey	c15c15c8d9	Remove a call to show_source_line from TUI This removes a call to show_source_line from tui_source_window_base. This call isn't needed because this function already calls the 'refill' method if the state changed. gdb/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> * tui/tui-winsource.c (tui_source_window_base::set_is_exec_point_at): Don't call show_source_line.	6 years ago
Tom Tromey	149830c137	Use an inner window in tui_py_window This changes tui_py_window to create an inner curses window. This greatly simplifies tui_py_window::output, beacuse it no longer needs to be careful to avoid overwriting the window's border. This patch also makes it a bit easier for a later patch to rewrite tui_copy_source_line. gdb/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> * python/py-tui.c (class tui_py_window) <refresh_window>: New method. <erase>: Update. <cursor_x, cursor_y>: Remove. <m_inner_window>: New member. (tui_py_window::rerender): Create inner window. (tui_py_window::output): Write to inner window.	6 years ago
Tom Tromey	5f278258cc	Remove test duplicate from gdb.tui I noticed a duplicated test in gdb.tui. This patch removes it by wrapping a test in with_test_prefix. gdb/testsuite/ChangeLog 2020-09-27 Tom Tromey <tom@tromey.com> * gdb.tui/new-layout.exp: Use with_test_prefix.	6 years ago
Alan Modra	12cf8b93da	Re: PR26656, power10 libstdc++.so segfault in __cxxabiv1::__cxa_throw Some missing NULL checks meant a stub for a local symbol used a stub looking like the __tls_get_addr_opt stub. PR 26656 * elf64-ppc.c (ppc_build_one_stub, ppc_size_one_stub): Check for NULL stub_entry->h before calling is_tls_get_addr.	6 years ago
GDB Administrator	5ecafd7020	Automatic date update in version.in	6 years ago
GDB Administrator	31f327a6c8	Automatic date update in version.in	6 years ago
Gareth Rees	8f9929bb97	gdb: Fix from_tty argument to gdb.execute in Python. Prior to commit `56bcdbea2b`, the from_tty keyword argument to the Python function gdb.execute controlled whether the command took input from the terminal. When from_tty=True, "starti" and similar commands prompted the user: (gdb) python gdb.execute("starti", from_tty=True) The program being debugged has been started already. Start it from the beginning? (y or n) y Starting program: /bin/true Program stopped. When from_tty=False, these commands did not prompt the user, and "yes" was assumed: (gdb) python gdb.execute("starti", from_tty=False) Program stopped. However, after commit `56bcdbea2b`, the from_tty keyword argument no longer had this effect. For example, as of commit 7ade7fba75: (gdb) python gdb.execute("starti", from_tty=True) The program being debugged has been started already. Start it from the beginning? (y or n) [answered Y; input not from terminal] Starting program: /bin/true Program stopped. Note the "[answered Y; input not from terminal]" in the output even though from_tty=True was requested. Looking at commit `56bcdbea2b`, it seems that the behaviour of the from_tty argument was changed accidentally. The commit message said: Let gdb.execute handle multi-line commands This changes the Python API so that gdb.execute can now handle multi-line commands, like "commands" or "define". and there was no mention of changing the effect of the from_tty argument. It looks as though the code for setting the instream to nullptr was accidentally moved from execute_user_command() to execute_control_commands() along with the other scoped restores. Accordingly, the simplest way to fix this is to partially reverse commit `56bcdbea2b` by moving the code for setting the instream to nullptr back to execute_user_command() where it was to begin with. Additionally, add a test case to reduce the risk of similar breakage in future. gdb/ChangeLog: PR python/26586 * cli/cli-script.c (execute_control_commands): don't set instream to nullptr here as this breaks the from_tty argument to gdb.execute in Python. (execute_user_command): set instream to nullptr here instead. gdb/testsuite/ChangeLog: PR python/26586 * gdb.python/python.exp: add test cases for the from_tty argument to gdb.execute.	6 years ago
Alan Modra	63e5eea234	[GOLD] PPC64_OPT_LOCALENTRY is incompatible with tail calls Gold version of commit `3cd7c7d7ef`. * powerpc.cc (Target_powerpc): Rename power10_stubs_ to power10_relocs_. (Target_powerpc::set_power10_relocs): New accessor. (Target_powerpc::set_power10_stubs): Delete. (Target_powerpc::power10_stubs): Adjust. (Target_powerpc::has_localentry0): New accessor. (ld_0_11): New constant. (glink_eh_frame_fde_64v1, glink_eh_frame_fde_64v2): Adjust. (glink_eh_frame_fde_64v2_localentry0): New. (Output_data_glink::pltresolve_size): Update. (Output_data_glink::add_eh_frame): Use localentry0 version eh_frame. (Output_data_glink::do_write): Move r2 save to start of ELFv2 stub and only emit for has_localentry0. Don't use r2 in the stub. (Target_powerpc::Scan::local, global): Adjust for set_power10_relocs renaming. (Target_powerpc::scan_relocs): Warn and reset plt_localentry0_.	6 years ago
Alan Modra	3cd7c7d7ef	PPC64_OPT_LOCALENTRY is incompatible with tail calls The save of r2 in __glink_PLTresolve is the culprit. Remove it, unless we know we need it for --plt-localentry. --plt-localentry should not be used with power10 pc-relative code that makes tail calls. The patch also removes use of r2 as a scratch reg in the ELFv2 __glink_PLTresolve. Using r2 isn't a problem, this is just reducing the number of scratch regs. bfd/ * elf64-ppc.c (GLINK_PLTRESOLVE_SIZE): Depend on has_plt_localentry0. (LD_R0_0R11, ADD_R11_R0_R11): Define. (ppc64_elf_tls_setup): Disable params->plt_localentry0 when power10 code detected. (ppc64_elf_size_stubs): Update __glink_PLTresolve eh_frame. (ppc64_elf_build_stubs): Move r2 save to start of __glink_PLTresolve, and only emit for has_plt_localentry0. Don't use r2 in the stub. ld/ * testsuite/ld-powerpc/elfv2so.d, * testsuite/ld-powerpc/notoc2.d, * testsuite/ld-powerpc/tlsdesc.wf, * testsuite/ld-powerpc/tlsdesc2.d, * testsuite/ld-powerpc/tlsdesc2.wf, * testsuite/ld-powerpc/tlsopt5.d, * testsuite/ld-powerpc/tlsopt5.wf, * testsuite/ld-powerpc/tlsopt6.d, * testsuite/ld-powerpc/tlsopt6.wf: Update __glink_PLTresolve.	6 years ago
Alan Modra	0be2fe677c	ubsan: opcodes/csky-opc.h:929 shift exponent 536870912 opcodes/ * csky-opc.h: Formatting. (GENERAL_REG_BANK): Correct spelling. Update use throughout file. (get_register_name): Mask arch with CSKY_ARCH_MASK for shift, and shift 1u. (get_register_number): Likewise. * csky-dis.c (get_gr_name, get_cr_name): Don't mask mach_flag. gas/ * config/tc-csky.c (parse_type_ctrlreg): Don't mask mach_flag for csky_get_control_regno. (csky_get_reg_val): Likewise when calling csky_get_general_regno.	6 years ago
GDB Administrator	0919fa3c46	Automatic date update in version.in	6 years ago
Simon Marchi	956bdb595b	gdb: fix formatting of _debug_printf macros The do/while in these macros are not formatted with proper GNU style, fix that. gdb/ChangeLog: * infrun.h (infrun_debug_printf): Fix formatting. * linux-nat.c (linux_nat_debug_printf): Fix formatting. Change-Id: I3a723663c76d9091f785941923c2b6cf67459629	6 years ago
Saagar Jha	3b93626be9	Add a missing munmap_list move constructor compile_module attempts to request a move constructor, but because munmap_list doesn't have one it gets implicitly deleted. This is an warning on clang under -Wdefaulted-function-deleted (which is enabled by default): In file included from compile/compile-object-load.c:21: compile/compile-object-load.h:56:3: error: explicitly defaulted move constructor is implicitly deleted [-Werror,-Wdefaulted-function-deleted] compile_module (compile_module &&other) = default; ^ compile/compile-object-load.h:86:22: note: move constructor of 'compile_module' is implicitly deleted because field 'munmap_list' has a deleted move constructor struct munmap_list munmap_list; ^ compile/compile-object-load.h:30:28: note: 'munmap_list' has been explicitly marked deleted here DISABLE_COPY_AND_ASSIGN (munmap_list); ^ gdb/ChangeLog: * compile/compile-object-load.h: Give munmap_list a move constructor. Change-Id: I300c52e27da70087f18c7e359773c2b984073d8b	6 years ago
Simon Marchi	ee1b8b9477	Import mklog.py from gcc repo I've been using the mklog utility from the gcc repo for a while to generate skeleton of ChangeLog entries. It recently got a rewrite as a Python script. Unfortunately, to find the repository root, and eventually to find in which ChangeLog file each entry goes, the new script assumes it is located in the same git repository that it generates ChangeLog entries for. This means that if you make a change in the gcc source tree and run mklog.py from that same source tree, it works. But if you make changes in your ~/src/binutils-gdb tree and run ~/src/gcc/contrib/mklog.py, it won't work. IIRC, the old script required that you ran it with the project's root directory as the CWD. The simplest way to fix this is to import the script in binutils-gdb and use it from there. It's also nice because we can use it without having a clone of the gcc repo. I also thought of adding a "--root" switch to the script to override the project's base directory. However: 1) It is more work. 2) If the script still lives in the gcc repo, it's less convenient than having it in binutils-gdb. This patch imports contrib/mklog.py from the gcc repo, revision c560591408440f441b8b327f5b41f9328d20b67b. contrib/ChangeLog: * mklog.py: New file, imported from gcc. Note: the ChangeLog entry above was generated using `git show \| ./mklog.py`! Change-Id: I955592ce6397681986dc82a09593c32d8b8de54f	6 years ago
Simon Marchi	e851246a2a	gdb: fix whitespaces in ChangeLog Change-Id: Ie5accb8915341cf9b4ed23162f9503d7ef947fcf	6 years ago
Gary Benson	c20c017b2c	Fix gdb.base/infcall-nested-structs-c++.exp with Clang gdb.base/infcall-nested-structs-c++.exp failed to build using Clang with many variations on the following error: gdb compile failed, /gdbtest/src/gdb/testsuite/gdb.base/infcall-nested-structs.c:207:46: warning: self-comparison always evaluates to true [-Wtautological-compare] This commit builds this testcase with -Wno-tautological-compare when using Clang, to avoid this failure. gdb/testsuite/ChangeLog: * gdb.base/infcall-nested-structs.exp.tcl: Add additional_flags=-Wno-tautological-compare for C++ tests when compiling using Clang.	6 years ago
Gary Benson	68d654afdf	Fix compilation of .c files as C++ when using Clang In commit `221db974e6`, this patch: 2020-06-24 Pedro Alves <palves@redhat.com> * lib/gdb.exp (gdb_compile): Pass "-x c++" explicitly when compiling C++ programs. attempted to fix problems with testcases that compile .c files with the C++ compiler. They pass the "c++" option to gdb_compile, resulting in the following error when using Clang: gdb compile failed, clang-10: warning: treating 'c' input as 'c++' when in C++ mode, this behavior is deprecated [-Wdeprecated] This fix did not work for gdb.base/infcall-nested-structs-c++.exp, however: the "-x c++" appeared in the compiler's commandline after the .c file, so the option was not enabled for that file. The previous files fixed all used build_executable_from_specs, which compiles and links in separate steps, using gdb_compile: the compile step passes $type=object to gdb_compile, while the link step passes $type=executable. gdb.base/infcall-nested-structs-c++.exp uses gdb_compile directly instead, and it passes $type=executable to compile and link all in one step. Pedro found that DejaGnu's default_target_compile adds the sources at the end when $type=object, but at the beginning when $type=executable: # This is obscure: we put SOURCES at the end when building an # object, because otherwise, in some situations, libtool will # become confused about the name of the actual source file. if {$type == "object"} { set opts "$add_flags $sources" } else { set opts "$sources $add_flags" } This commit moves the "-x c++" earlier in the compiler's commandline. Unfortunately this then broke the testcase that required the original fix, gdb.compile/compile-cplus.exp: the "-x c++" was being parsed for the linker pass, causing the compiler to attempt to parse the .o files as C++. This commit makes passing "-x c++" conditional on the source being a .c file. gdb/testsuite/ChangeLog: * lib/gdb.exp (gdb_compile): Pass "-x c++" earlier, and only for .c files.	6 years ago
Alan Modra	5a805384b8	asan: readelf buffer overflow and abort * elfcomm.c (byte_put_little_endian, byte_put_big_endian): Support more field sizes. * readelf.c (target_specific_reloc_handling <MSP430>): Limit allowed reloc_size. Don't read_leb128 outside of section.	6 years ago
Alan Modra	cc9ea2c21c	Re: Sync libiberty and include with GCC for get_DW_UT_name * dwarf.h (DW_FIRST_UT, DW_UT, DW_END_UT): Define.	6 years ago
Cui,Lili	09d7303523	Put together MOD_VEX_0F38* in i386-dis.c, There are 11 MOD_VEX_0F38* inserted in MOD_0F38* group, which should be placed in MOD_VEX_0F38* group. opcode/ PR 26654 i386-dis.c (enum): Put MOD_VEX_0F38 together.	6 years ago
GDB Administrator	bee4644aff	Automatic date update in version.in	6 years ago
Jim Wilson	743f5cfc00	RISC-V: Error for relaxable branch in absolute section. Emit an error instead of crashing in frag_new, handling this same as the i386 port. gas/ PR 26400 * config/tc-riscv.c (append_insn): If in absolute section, emit error before add_relaxed_insn call. * testsuite/gas/riscv/absolute-sec.d: New. * testsuite/gas/riscv/absolute-sec.l: New. * testsuite/gas/riscv/absolute-sec.s: New.	6 years ago
Mark Wielaard	debd1a62c4	readelf: Show Unit Type for DWARF5 binutils/ChangeLog: * dwarf.c (process_debug_info): Print Unit Type for DWARF5. * testsuite/binutils-all/dw5.W: Adjust expected output. * testsuite/binutils-all/dwarf-attributes.W: Likewise. gas/ChangeLog: * testsuite/gas/elf/dwarf-5-cu.d: Adjust expected output.	6 years ago
Mark Wielaard	d7b477c541	Sync libiberty and include with GCC for get_DW_UT_name. This adds a get_DW_UT_name function to dwarfnames using dwarf2.def for use in binutils readelf to show the unit types in a DWARF5 header. include/ChangeLog: Sync with GCC * dwarf2.def: Add DWARF5 Unit type header encoding macros DW_UT_FIRST, DW_UT and DW_UT_END. * dwarf2.h (enum dwarf_unit_type): Removed and define using DW_UT_FIRST, DW_UT and DW_UT_END macros. (get_DW_UT_name): New function declaration. libiberty/ChangeLog: Sync with GCC * dwarfnames.c (get_DW_UT_name): Define using DW_UT_FIRST, DW_UT and DW_UT_END.	6 years ago
Mark Wielaard	ec47b32a85	binutils: Handle DWARF5 DW_FORM_ref_addr and DW_UT_partial. dwz in DWARF5 mode might produce DW_UT_partial unit types, which are the same as DW_UT_compile unit types (but start with a DW_TAG_partial_unit) and it might produce DW_FORM_ref_addr to create a reference between units. Accept both constructs. binutils/ChangeLog: * dwarf.c (read_and_display_attr_value): Handle DW_FORM_ref_addr for dwarf_version 5 just as version 3 and 4 (only 2 is different). (process_debug_info): Allow DW_UT_partial.	6 years ago
Simon Marchi	29363cfa40	gdb: remove file_handler typedef Remove the typedef (unneeded with C++). Re-format the comments to follow the more common style. gdbsupport/ChangeLog: * event-loop.c (struct file_handler): Remove typedef, re-format. Change-Id: I3aea21fba1eb2584c507de3412da4e4c98283b2d	6 years ago
Tom Tromey	b551a89f51	Don't let TUI focus on locator PR tui/26638 notes that the C-x o binding can put the focus on the locator window. However, this is not useful and did not happen historically. This patch changes the TUI to skip this window when switching focus. gdb/ChangeLog 2020-09-24 Tom Tromey <tromey@adacore.com> PR tui/26638: * tui/tui-stack.h (struct tui_locator_window) <can_focus>: New method. * tui/tui-data.h (struct tui_win_info) <can_focus>: New method. * tui/tui-data.c (tui_next_win): Exclude non-focusable windows. (tui_prev_win): Rewrite. gdb/testsuite/ChangeLog 2020-09-24 Tom Tromey <tromey@adacore.com> PR tui/26638: * gdb.tui/list.exp: Check output of "focus next".	6 years ago
Hannes Domani	99bb393f1d	Handle 64bit breakpoints of WOW64 processes as SIGINT When a WOW64 process triggers a breakpoint exception in 64bit code (which happens when a 64bit gdb calls DebugBreakProcess for a 32bit target), gdb ignores the breakpoint (because Wow64GetThreadContext can only report the pc of 32bit code, and there is not int3 at this location). But if these 64bit breakpoint exceptions are handled as SIGINT, gdb doesn't check for int3, and always stops the target. gdb/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * nat/windows-nat.c (handle_exception): Handle 64bit breakpoints in WOW64 processes as SIGINT. * nat/windows-nat.h: Make wow64_process a shared variable. * windows-nat.c: Remove static wow64_process variable. gdbserver/ChangeLog: 2020-09-23 Hannes Domani <ssbssa@yahoo.de> * win32-low.cc: Remove local wow64_process variable. * win32-low.h: Remove local wow64_process variable.	6 years ago
Alex Coplan	6eee0315f6	arm: Add support for Neoverse V1 CPU This patch adds support for Arm's Neoverse V1 CPU to AArch32 binutils. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-arm.c (arm_cpus): Add Neoverse V1. * doc/c-arm.texi: Document Neoverse V1 support.	6 years ago
Alex Coplan	9e980ddcef	aarch64: Add support for Neoverse V1 CPU This adds support for Arm's Neoverse V1 CPU to AArch64 binutils. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-aarch64.c (aarch64_cpu_option_table): Add Neoverse V1. * doc/c-aarch64.texi: Document Neoverse V1 support.	6 years ago
Andrew Burgess	011a045a6b	csky/opcodes: enclose if body in curly braces This commit: commit `afdcafe891` Date: Thu Sep 17 14:30:28 2020 +0800 CSKY: Add objdump option -M abi-names. cases the build of GDB (configured with --enabled-targets=all) to fail with this error: libtool: compile: gcc -DHAVE_CONFIG_H -I. -I../../src/opcodes -I. -I../../src/opcodes -I../bfd -I../../src/opcodes/../include -I../../src/opcodes/../bfd -W -Wall -Wstrict-prototypes -Wmissing-prototypes -Wshadow -Wstack-usage=262144 -Werror -O0 -g3 -D_GLIBCXX_DEBUG=1 -MT csky-dis.lo -MD -MP -MF .deps/csky-dis.Tpo -c ../../src/opcodes/csky-dis.c -o csky-dis.o ../../src/opcodes/csky-dis.c: In function 'csky_output_operand': ../../src/opcodes/csky-dis.c:849:7: error: this 'if' clause does not guard... [-Werror=misleading-indentation] 849 \| if (IS_CSKY_V1 (mach_flag)) \| ^~ ../../src/opcodes/csky-dis.c:851:2: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the 'if' 851 \| strcat (str, buf); \| ^~~~~~ this commit adds { ... } around the if body to resolve this issue. opcodes/ChangeLog: * csky-dis.c (csky_output_operand): Enclose body of if in curly braces.	6 years ago
Nick Clifton	a2ab58313a	Document that the lower case 'c' character in nm's output is used to signify a small common. PR 26662 * doc/binutils.texi (nm): Document that 'c' is used for small common symbols.	6 years ago
Alex Coplan	f3034e25fa	arm: Add support for Neoverse N2 CPU This adds support for Arm's Neoverse N2 CPU to AArch32 binutils. The Neoverse N2 CPU builds AArch32 at EL0 and therefore needs support in the AArch32 assembler. gas/ChangeLog: 2020-09-24 Alex Coplan <alex.coplan@arm.com> * config/tc-arm.c (arm_cpus): Add Neoverse N2. * doc/c-arm.texi: Document -mcpu=neoverse-n2.	6 years ago
Cui,Lili	81d54bb7ae	Add support for Intel TDX instructions. gas/ * NEWS: Add TDX. * config/tc-i386.c (cpu_arch): Add .tdx. (cpu_noarch): Likewise. * doc/c-i386.texi: Document tdx. * testsuite/gas/i386/i386.exp: Run tdx tests. * testsuite/gas/i386/tdx.d: Likewise. * testsuite/gas/i386/tdx.s: Likewise. * testsuite/gas/i386/x86-64-tdx.d: Likewise. * testsuite/gas/i386/x86-64-tdx.s: Likewise. opcodes/ * i386-dis.c (enum): Add PREFIX_0F01_REG_1_RM_5, PREFIX_0F01_REG_1_RM_6, PREFIX_0F01_REG_1_RM_7, X86_64_0F01_REG_1_RM_5_P_2, X86_64_0F01_REG_1_RM_6_P_2, X86_64_0F01_REG_1_RM_7_P_2. (prefix_table): Likewise. (x86_64_table): Likewise. (rm_table): Likewise. * i386-gen.c (cpu_flag_init): Add CPU_TDX_FLAGS and CPU_ANY_TDX_FLAGS. (cpu_flags): Add CpuTDX. * i386-opc.h (enum): Add CpuTDX. (i386_cpu_flags): Add cputdx. * i386-opc.tbl: Add TDX insns. * i386-init.h: Regenerate. * i386-tbl.h: Likewise.	6 years ago
GDB Administrator	7469ddd78f	Automatic date update in version.in	6 years ago
Alan Modra	a993d270f8	[GOLD] PowerPC64 __tls_get_addr_opt stub This stub doesn't have the r2 store at the beginning. * powerpc.cc (Target_powerpc::Relocate::relocate): Don't skip first insn of __tls_get_addr_opt stub.	6 years ago
Alan Modra	294338867c	PR26656, power10 libstdc++.so segfault in __cxxabiv1::__cxa_throw This adds missing support for a power10 version of the __tls_get_addr call stub implementing DT_PPC64_OPT PPC64_OPT_TLS. Without this, power10 code using __tls_get_addr fails miserably at runtime unless the --no-tls-get-addr-optimize option is given. PR 26656 * elf64-ppc.c (plt_stub_size): Add "odd" param. Use it with size_power10_offset rather than calculating from start of stub. Add size for notoc tls_get_addr_opt stub. (plt_stub_pad): Add "odd" param, pass to plt_stub_size. (build_tls_get_addr_head, build_tls_get_addr_tail): New functions. (build_tls_get_addr_stub): Delete. (ppc_build_one_stub): Use a temp for htab->params->stub_bfd. Emit notoc tls_get_addr_opt stub. Move eh_frame code to suit. Adjust code to use bfd_tls_get_addr_head/tail in place of build_tls_get_addr_stub. (ppc_size_one_stub): Size notoc tls_get_addr_opt stub. Adjust plt_stub_size and plt_stub_pad calls. Correct "odd" when padding stub. Size eh_frame for notoc stub too. Correct lr_restore value. (ppc64_elf_relocate_section): Don't skip over first insn of notoc tls_get_addr_opt stub.	6 years ago
Alan Modra	c94053440e	PR26655, Power10 libstdc++.so R_PPC64_NONE dynamic relocs Some of the powerpc64 code editing functions are better run after dynamic symbols have stabilised in order to make proper decisions based on SYMBOL_REFERENCES_LOCAL. The dynamic symbols are processed early in bfd_elf_size_dynamic_sections, before the backend always_size_sections function is called. One function, ppc64_elf_tls_setup must run before bfd_elf_size_dynamic_sections because it changes dynamic symbols. ppc64_elf_edit_opd and ppc64_elf_inline_plt can run early or late, I think. ppc64_elf_tls_optimize and ppc64_elf_edit_toc are better run later. So this patch arranges to call some edit functions later via always_size_sections. PR 26655 bfd/ * elf64-ppc.c (ppc64_elf_func_desc_adjust): Rename to.. (ppc64_elf_edit): Call params->edit. (ppc64_elf_tls_setup): Don't call _bfd_elf_tls_setup. Return a bfd_boolean. * elf64-ppc.h (struct ppc64_elf_params): Add "edit". (ppc64_elf_tls_setup): Update declaration. ld/ * emultempl/ppc64elf.em (params): Add ppc_edit. (ppc_before_allocation): Split off some edit functions to.. (ppc_edit): ..this, new function.	6 years ago
Cooper Qu	afdcafe891	CSKY: Add objdump option -M abi-names. Add option parser for disassembler, and refine the codes of parse register operand and disassemble register operand. While strengthen the operands legality check of some instructions. Co-Authored-By: Lifang Xia <lifang_xia@c-sky.com> gas/ * config/tc-csky.c (parse_type_ctrlreg): Use function csky_get_control_regno to operand. (csky_get_reg_val): Likewise. (is_reg_sp_with_bracket): Use function csky_get_reg_val to parse operand. (is_reg_sp): Refine. (is_oimm_within_range): Fix, report error when operand is not constant. (parse_type_cpreg): Refine. (parse_type_cpcreg): Refine. (get_operand_value): Add handle of OPRND_TYPE_IMM5b_LS. (md_assemble): Fix no error reporting somtimes when operands number are not fit. (csky_addc64): Refine. (csky_subc64): Refine. (csky_or64): Refine. (v1_work_fpu_fo): Refine. (v1_work_fpu_read): Refine. (v1_work_fpu_writed): Refine. (v1_work_fpu_readd): Refine. (v2_work_addc): New function, strengthen the operands legality check of addc. * gas/testsuite/gas/csky/all.d : Use register number format when disassemble register name by default. * gas/testsuite/gas/csky/cskyv2_all.d : Likewise. * gas/testsuite/gas/csky/trust.d: Likewise. * gas/testsuite/gas/csky/cskyv2_ck860.d : Fix. * gas/testsuite/gas/csky/trust.s : Fix. opcodes/ * csky-dis.c (using_abi): New. (parse_csky_dis_options): New function. (get_gr_name): New function. (get_cr_name): New function. (csky_output_operand): Use get_gr_name and get_cr_name to disassemble and add handle of OPRND_TYPE_IMM5b_LS. (print_insn_csky): Parse disassembler options. * opcodes/csky-opc.h (OPRND_TYPE_IMM5b_LS): New enum. (GENARAL_REG_BANK): Define. (REG_SUPPORT_ALL): Define. (REG_SUPPORT_ALL): New. (ASH): Define. (REG_SUPPORT_A): Define. (REG_SUPPORT_B): Define. (REG_SUPPORT_C): Define. (REG_SUPPORT_D): Define. (REG_SUPPORT_E): Define. (csky_abiv1_general_regs): New. (csky_abiv1_control_regs): New. (csky_abiv2_general_regs): New. (csky_abiv2_control_regs): New. (get_register_name): New function. (get_register_number): New function. (csky_get_general_reg_name): New function. (csky_get_general_regno): New function. (csky_get_control_reg_name): New function. (csky_get_control_regno): New function. (csky_v2_opcodes): Prefer two oprerans format for bclri and bseti, strengthen the operands legality check of addc, zext and sext.	6 years ago
Tom Tromey	20a5fcbd5b	Handle bit offset and bit size in base types PR symtab/25470 points out that the Zig programming language allows integers of various bit sizes (including zero), not just sizes that are a multiple of 8. This is supported in DWARF by applying both a byte size and a DW_AT_bit_size. This patch adds support for this feature to integer and boolean types. Other base types are not handled -- for floating-point types, this didn't seem to make sense, and for character types I didn't see much need. (These can be added later if desired.) I've also added support for DW_AT_data_bit_offset at the same time. I don't know whether the Zig compiler requires this, but it was described in the same section in the DWARF standard and was easy to add. A new test case is supplied, using the DWARF assembler. gdb/ChangeLog 2020-09-23 Tom Tromey <tom@tromey.com> PR symtab/25470: * value.c (unpack_long, pack_long, pack_unsigned_long): Handle bit offset and bit size. * printcmd.c (print_scalar_formatted): Handle zero-length integer. (print_scalar_formatted): Use bit_size_differs_p. * gdbtypes.h (enum type_specific_kind) <TYPE_SPECIFIC_INT>: New constant. (union type_specific): <int_stuff>: New member. (struct type) <bit_size_differs_p, bit_size, bit_offset>: New methods. * gdbtypes.c (init_integer_type, init_boolean_type): Initialize TYPE_SPECIFIC_FIELD. (recursive_dump_type, copy_type_recursive): Update. * dwarf2/read.c (read_base_type): Handle DW_AT_bit_size and DW_AT_data_bit_offset. gdb/testsuite/ChangeLog 2020-09-23 Tom Tromey <tom@tromey.com> * gdb.dwarf2/intbits.exp: New file. * gdb.dwarf2/intbits.c: New file.	6 years ago

1 2 3 4 5 ...

103455 Commits (12e35da62fbce831da2bb591e31d05aa4060d11a) All Branches Search

103455 Commits (12e35da62fbce831da2bb591e31d05aa4060d11a)

All Branches