binutils-gdb

Commit Graph

Author	SHA1	Message	Date
Nick Clifton	9cf03b7e41	2011-10-13 Nick Clifton <nickc@redhat.com> Fixes to aid translation: * addr2line.c (translate_address): Add comments describing context of a couple of printf statements. * ar.c (write_archive): Allow translation of error message. * bucomm.c (endian_string): Allow translation of strings. (display_target_list): Allow translation. * coffdump.c (dump_coff_type): Allow translation of output. (dump_coff_where): Likewise. (dump_coff_symbol): Likewise. (dump_coff_scope): Likewise. (dump_coff_sfile): Likewise. (dump_coff_section): Likewise. (coff_dump): Likewise. * dlltool (def_version): Allow translation of output. (run): Likewise. * dllwrap.c (run): Allow translation of output. * dwarf.c (print_dwarf_vma): Allow translation of output. (process_extended_line_op): Remove spurious translation. Add translation for strings that can be translated. (decode_location_exression): Allow translation of output. (read_and_display_attr_value): Allow translation of output. * readelf.c (slurp_rela_relocs): Add translation for error messages when failing to get data. (slurp_rel_relocs): Likewise. (get_32bit_elf_symbols): Likewise. (get_64bit_elf_symbols): Likewise. (dump_ia64_vms_dynamic_relocs): Replace abbreviation with full word. (process_relocs): Remove spurious translation. (decode_tic6x_unwind_bytecode): Likewise. (process_version_section): Improve error messages. (process_mips_specific): Likewise. (print_gnu_note): Remove spurious translation. (print_stapsdt_note): Likewise. (get_ia64_vms_note_type): Likewise. * sysdump.c (getCHARS): Allow translation. (fillup): Allow translation of output. (getone): Likewise. (must): Likewise. (derived_type): Likewise. * doc/binutils.doc (addr2line): Extend description of command line options. * po/binutils.pot: Regenerate.	15 years ago
H.J. Lu	7a9068fe16	Add initial Intel K1OM support. bfd/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (ALL_MACHINES): Add cpu-k1om.lo. (ALL_MACHINES_CFILES): Add cpu-k1om.c. * Makefile.in: Regenerated. * archures.c (bfd_architecture): Add bfd_arch_k1om. (bfd_k1om_arch): New. (bfd_archures_list): Add &bfd_k1om_arch. * bfd-in2.h: Regenerated. * config.bfd (targ64_selvecs): Add bfd_elf64_k1om_vec if bfd_elf64_x86_64_vec is supported. Add bfd_elf64_k1om_freebsd_vec if bfd_elf64_x86_64_freebsd_vec is supported. (targ_selvecs): Likewise. * configure.in: Support bfd_elf64_k1om_vec and bfd_elf64_k1om_freebsd_vec. * configure: Regenerated. * cpu-k1om.c: New. * elf64-x86-64.c (elf64_k1om_elf_object_p): New. (bfd_elf64_k1om_vec): Likewise. (bfd_elf64_k1om_freebsd_vec): Likewise. * targets.c (bfd_elf64_k1om_vec): New. (bfd_elf64_k1om_freebsd_vec): Likewise. (_bfd_target_vector): Add bfd_elf64_k1om_vec and bfd_elf64_k1om_freebsd_vec. binutils/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * dwarf.c (init_dwarf_regnames): Handle EM_K1OM. * elfedit.c (elf_machine): Support EM_K1OM. (elf_class): Likewise. * readelf.c (guess_is_rela): Handle EM_K1OM. (dump_relocations): Likewise. (get_machine_name): Likewise. (get_section_type_name): Likewise. (get_elf_section_flags): Likewise. (process_section_headers): Likewise. (get_symbol_index_type): Likewise. (is_32bit_abs_reloc): Likewise. (is_32bit_pcrel_reloc): Likewise. (is_64bit_abs_reloc): Likewise. (is_64bit_pcrel_reloc): Likewise. (is_none_reloc): Likewise. * doc/binutils.texi: Mention K1OM for elfedit. binutils/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/elfedit.exp: Run elfedit-4. * binutils-all/elfedit-4.d: New. gas/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * config/tc-i386.c (cpu_arch): Add k1om. (i386_align_code): Handle PROCESSOR_K1OM. (check_cpu_arch_compatible): Check EM_K1OM. (i386_arch): Handle Intel K1OM. (i386_mach): Return bfd_mach_k1om for Intel K1OM. (i386_target_format): Return ELF_TARGET_K1OM_FORMAT for Intel K1OM. * config/tc-i386.h (ELF_TARGET_K1OM_FORMAT): New. (processor_type): Add PROCESSOR_K1OM. * doc/c-i386.texi: Document k1om. gas/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * gas/i386/k1om.d: New. * gas/i386/k1om-inval.l: Likewise. * gas/i386/k1om-inval.s: Likewise. * gas/i386/i386.exp: Run k1om-inval and k1om. include/elf/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * common.h (EM_K1OM): New. ld/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * Makefile.am (ALL_64_EMULATIONS): Add eelf_k1om.o and eelf_k1om_fbsd.o (eelf_k1om.c): New. (eelf_k1om_fbsd.c): Likewise. * Makefile.in: Regenerated. * configure.tgt (targ64_extra_emuls): Add elf_k1om if elf_x86_64 is supported. Add elf_k1om_fbsd if elf_x86_64_fbsd is supported. (targ_extra_emuls): Likewise. * emulparams/elf_k1om.sh: New. * emulparams/elf_k1om_fbsd.sh: Likewise. ld/testsuite/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * ld-x86-64/abs-k1om.d: New. * ld-x86-64/protected2-k1om.d: Likewise. * ld-x86-64/protected3-k1om.d: Likewise. * ld-x86-64/x86-64.exp: Run abs-k1om, protected2-k1om and protected3-k1om. opcodes/ 2011-07-22 H.J. Lu <hongjiu.lu@intel.com> * configure.in: Handle bfd_k1om_arch. * configure: Regenerated. * disassemble.c (disassembler): Handle bfd_k1om_arch. * i386-dis.c (print_insn): Handle bfd_mach_k1om and bfd_mach_k1om_intel_syntax. * i386-gen.c (cpu_flag_init): Set CPU_UNKNOWN_FLAGS to ~(CpuL1OM\|CpuK1OM). Add CPU_K1OM_FLAGS. (cpu_flags): Add CpuK1OM. * i386-opc.h (CpuK1OM): New. (i386_cpu_flags): Add cpuk1om. * i386-init.h: Regenerated. * i386-tbl.h: Likewise.	15 years ago
Thomas Schwinge	9c55345c8c	ELFOSABI_GNU bfd/ * elf.c (_bfd_elf_set_osabi): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX alias. * elf32-hppa.c: Likewise. * elf32-i370.c: Likewise. * elf64-hppa.c: Likewise. binutils/ * elfedit.c (osabis): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX alias and ELFOSABI_HURD. Add GNU alias. * readelf.c (get_osabi_name, get_symbol_binding, get_symbol_type): Likewise. * doc/binutils.texi <elfedit>: Update accordingly. elfcpp/ * elfcpp.h (ELFOSABI): Add ELFOSABI_GNU with value of ELFOSABI_LINUX, keep ELFOSABI_LINUX as an alias. Remove ELFOSABI_HURD. gas/ * config/obj-elf.c (obj_elf_type): Use ELFOSABI_GNU name instead of ELFOSABI_LINUX alias. * config/tc-ia64.c: Likewise. include/elf/ * common.h (ELFOSABI_GNU): Define, replaces... (ELFOSABI_LINUX): ... this, kept as an alias. (ELFOSABI_HURD): Remove. ld/testsuite/ * ld-ifunc/ifunc.exp: Update for changed output. * ld-unique/unique.exp: Likewise.	15 years ago
Nick Clifton	8adf5d7047	PR binutils/12325 * doc/binutils.texi (ar cmdline): Document --target, --version and --help command line options.	15 years ago
Nick Clifton	cc643b88f1	Fix spelling mistakes.	15 years ago
Nick Clifton	0ba0c2b343	PR binutils/12753 * nm.c (filter_symbols): Treat unique symbols as global symbols. * doc/binutils.texi (nm): Mention that some lowercase letters actually indicate global symbols. * lib/utils-lib.exp (run_dump_test): Allow nm as a program. * binutils-all/nm.exp: Test running "nm -g" on an object file containing a unique symbol.	15 years ago
Tristan Gingold	6abcee9042	2011-05-16 Tristan Gingold <gingold@adacore.com> * od-xcoff.c: New file. * objdump.h: New file. * objdump.c: Include objdump.h (dump_private_options, objdump_private_vectors): New variables. (usage): Mention -P/--private. Display handled options. (long_options): Add -P/--private. (dump_target_specific): New function. (dump_bfd): Handle dump_private_options. (main): Handle -P. * doc/binutils.texi (objdump): Document -P/--private. * configure.in (OBJDUMP_PRIVATE_VECTORS, OBJDUMP_PRIVATE_OFILES): New variables, compute them. (od_vectors): Add vectors for private dumpers. Make them uniq. (OBJDUMP_DEFS): Add OBJDUMP_PRIVATE_VECTORS. * Makefile.am (HFILES): Add objdump.h (CFILES): Add od-xcoff.c (OBJDUMP_PRIVATE_OFILES): New variable. (objdump_DEPENDENCIES): Append OBJDUMP_PRIVATE_OFILES. (objdump_LDADD): Ditto. (EXTRA_objdump_SOURCES): Define. * Makefile.in: Regenerate. * configure: Regenerate.	15 years ago
Tom Tromey	fd2f003344	* NEWS: Add note about --dwarf-depth, --dwarf-start, and dwarf-mode.el. * objdump.c (suppress_bfd_header): New global. (usage): Update. (OPTION_DWARF_DEPTH, OPTION_DWARF_START): New constants. (options): Add dwarf-depth and dwarf-start entries. (dump_bfd): Use suppress_bfd_header. (main): Handle OPTION_DWARF_START, OPTION_DWARF_DEPTH. * doc/binutils.texi (objcopy): Document --dwarf-depth and --dwarf-start. (readelf): Likewise. * dwarf-mode.el: New file. * dwarf.c (dwarf_cutoff_level, dwarf_start_die): New globals. (read_and_display_attr_value): Also check debug_info_p. (process_debug_info): Handle dwarf_start_die and dwarf_cutoff_level. * dwarf.h (dwarf_cutoff_level, dwarf_start_die): Declare. * readelf.c (usage): Update. (OPTION_DWARF_DEPTH): New macro. (OPTION_DWARF_START): Likewise. (options): Add dwarf-depth and dwarf-start entries. (parse_args): Handle OPTION_DWARF_START and OPTION_DWARF_DEPTH. testsuite * binutils-all/objdump.W: Correct output.	15 years ago
Nick Clifton	ec25acb399	* windres.c (usage): Add new --preprocessor-arg option. (option_values): Add new OPTION_PREPROCESSOR_ARG enumerator. (option long_options): Add preprocessor-arg option. (main): Handle it. * doc/binutils.texi: Add documentation for --preprocessor-arg option. * NEWS: Add line about new --preprocessor-arg option for windres. * binutils-all/windres/windres.exp: Add '// cpparg <option>' command to rc file interpretation to specify addition pre-processor commands as script option. * binutils-all/windres/strtab3.rc: New. * binutils-all/windres/strtab3.rsd: New. * binutils-all/windres/README: Add note about cpparg script option. argument	15 years ago
H.J. Lu	08ebfb8c18	Fix typos in elfedit documentation. 2010-12-12 Peter Breitenlohner <peb@mppmu.mpg.de> PR binutils/12306 * doc/binutils.texi: Fix typos in elfedit documentation.	16 years ago
Doug Evans	5bbdf3d565	* dwarf.c: #include "bfd_stdint.h". (do_gdb_index): New global. (display_gdb_index): New function. (dwarf_select_sections_by_names) Add "gdb_index". (dwarf_select_sections_all): Set do_gdb_index. (debug_displays): Add .gdb_index. * dwarf.h (do_gdb_index): Declare. * objdump.c (usage): Add gdb_index. * readelf.c (usage): Add gdb_index. (process_section_headers): Process ".gdb_index". * doc/binutils.texi (readelf): Document gdb_index dump. (objdump): Ditto.	16 years ago
H.J. Lu	4a114e3e0c	Add compressed debug section support to binutils and ld. bfd/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> Cary Coutant <ccoutant@google.com> * archive.c (bfd_openr_next_archived_file): Copy BFD_COMPRESS and BFD_DECOMPRESS. * bfd.c (BFD_COMPRESS): New. (BFD_DECOMPRESS): Likewise. (BFD_FLAGS_SAVED): Likewise. (bfd_preserve_save): Replace BFD_IN_MEMORY with BFD_FLAGS_SAVED. * compress.c (bfd_uncompress_section_contents): Removed. (get_uncompressed_size): New. (decompress_contents): Likewise. (bfd_compress_section_contents): Likewise. (bfd_get_full_section_contents): Likewise. (bfd_is_section_compressed): Likewise. (bfd_init_section_decompress_status): Likewise. (bfd_init_section_compress_status): Likewise. * dwarf2.c (dwarf_debug_sections): New. (dwarf_debug_section_enum): Likewise. (read_section): Remove section_name and compressed_section_name. Add dwarf_debug_section_enum. Try compressed debug section. (read_indirect_string): Updated. (read_abbrevs): Likewise. (decode_line_info): Likewise. (read_debug_ranges): Likewise. (find_line): Updated. * ecoff.c (bfd_debug_section): Add compress_status and compressed_size. * elf.c (_bfd_elf_make_section_from_shdr): Call bfd_is_section_compressed to check if a DWARF debug section is compressed. Call bfd_init_section_compress_status or bfd_init_section_decompress_status if needed. * elflink.c (elf_link_input_bfd): Replace bfd_get_section_contents with bfd_get_full_section_contents. * merge.c (_bfd_add_merge_section): Likewise. * reloc.c (bfd_generic_get_relocated_section_contents): Likewise. * simple.c (bfd_simple_get_relocated_section_contents): Likewise. * elfxx-target.h (TARGET_BIG_SYM): Allow BFD_COMPRESS and BFD_DECOMPRESS. (TARGET_LITTLE_SYM): Likewise. * libbfd-in.h (dwarf_debug_section): New. (dwarf_debug_sections): Likewise. * libbfd.c (_bfd_generic_get_section_contents): Issue an error when getting contents on compressed/decompressed section. * section.c (COMPRESS_SECTION_NONE): New. (COMPRESS_SECTION_DONE): Likewise. (DECOMPRESS_SECTION_SIZED): Likewise. (BFD_FAKE_SECTION): Add compress_status and compressed_size. (bfd_malloc_and_get_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. * bfd-in2.h: Regenerated. * libbfd.h: Likewise. binutils/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * addr2line.c (process_file): Set BFD_DECOMPRESS. * objcopy.c (do_debug_sections): New. (OPTION_COMPRESS_DEBUG_SECTIONS): New. (OPTION_DECOMPRESS_DEBUG_SECTIONS): Likewise. (copy_options): Add OPTION_COMPRESS_DEBUG_SECTIONS and OPTION_DECOMPRESS_DEBUG_SECTIONS. (copy_usage): Add --compress-debug-sections and --decompress-debug-sections. (copy_file): Set BFD_COMPRESS or BFD_DECOMPRESS. (copy_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. (copy_main): Handle OPTION_COMPRESS_DEBUG_SECTIONS and OPTION_DECOMPRESS_DEBUG_SECTIONS. Check do_debug_sections to rename DWARF debug sections. * objdump.c (load_specific_debug_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. Remove bfd_uncompress_section_contents. (dump_section): Replace bfd_get_section_contents with bfd_get_full_section_contents. (display_file): Set BFD_DECOMPRESS if needed. * readelf.c (uncompress_section_contents): Set buffer to NULL to indiate decompression failure. (load_specific_debug_section): Always call uncompress_section_contents. * doc/binutils.texi: Document --compress-debug-sections and --decompress-debug-sections. binutils/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/compress.exp: New. * binutils-all/dw2-1.S: Likewise. * binutils-all/dw2-2.S: Likewise. * binutils-all/libdw2-compressed.out: Likewise. * binutils-all/libdw2.out: Likewise. gas/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * write.c (compress_debug): Optimize section flags check. gas/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * elf/dwarf2-1.s: Replace .zdebug_abbrev section with .debug_abbrev section. * elf/dwarf2-2.3: Likewise. * elf/dwarf2-1.d: Pass --compress-debug-sections to assembler. Updated. * elf/dwarf2-2.d: Likewise. * gas/i386/i386.exp: Remove xfail on dw2-compress-2 and x86-64-dw2-compress-2. ld/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * ldfile.c (ldfile_try_open_bfd): Set BFD_DECOMPRESS after bfd_openr returns. * emultempl/elf32.em (gld${EMULATION_NAME}_try_needed): Likewise. * scripttempl/elf.sc: Include compressed DWARF debug sections. ld/testsuite/ 2010-10-29 H.J. Lu <hongjiu.lu@intel.com> * ld-elf/compress.exp: New. * ld-elf/compress1.s: Likewise. * ld-elf/compress1a.d: Likewise. * ld-elf/compress1b.d: Likewise. * ld-elf/compress1c.d: Likewise.	16 years ago
Nick Clifton	e58bcb8f09	PR binutils/12058 * ar.c (usage): Revert previous change. Describe how 's' can be used as a command letter. * doc/binutils.texi (ar cmdline): Describe how 's' can be used as a command letter.	16 years ago
Nick Clifton	b7dd81f7c5	* objcopy.c: Add --interleave-width option to allow interleaving of more than one byte at a time. (copy_width): New variable. (copy_options): Add --interleave-width. (copy_section): When interleaving copy in units of copy_width bytes. (copy_main): Parse the new option. * doc/binutils: Document the new option. * NEWS: Mention the new feature. * binutils-all/objcopy.exp: Add test of new --interleave-width option.	16 years ago
H.J. Lu	d0514c4914	Add --input-osabi and --output-osabi to elfedit. binutils/ 2010-08-23 H.J. Lu <hongjiu.lu@intel.com> * elfedit.c (input_elf_osabi): New. (output_elf_osbi): Likewise. (osabis): Likewise. (elf_osabi): Likewise. (update_elf_header): Support updating ELF OSABI. (make_qualified_name): Break long line. (command_line_switch): Add OPTION_INPUT_OSABI and OPTION_OUTPUT_OSABI. (options): Likewise. (usage): Add --input-osabi and --output-osabi. (main): Handle OPTION_INPUT_OSABI and OPTION_OUTPUT_OSABI. * doc/binutils.texi: Document --input-osabi and --output-osabi for elfedit. binutils/testsuite/ 2010-08-23 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/elfedit-3.d: New. * binutils-all/elfedit.exp: Run elfedit-3.	16 years ago
Tristan Gingold	6f875884e0	2010-05-24 Tristan Gingold <gingold@adacore.com> * readelf.c (usage): Add new trace sections for --debug-dump. (process_section_headers): Handle dump of trace sections. * objdump.c (usage): Add new trace sections for --dwarf. * dwarf.h (do_trace_info, do_trace_abbrevs): New variables. (do_trace_aranges): Ditto. (enum dwarf_section_display_enum): Add trace_info, trace_abbrev and trace_aranges literals. * dwarf.c (do_trace_info, do_trace_abbrevs): New variables. (do_trace_aranges): Ditto. (process_debug_info): Add abbrev_sec argument and replace abbrev with abbrev_sec. (load_debug_info): Adjust call of process_debug_info. (display_debug_info): Ditto. (display_trace_info): New function. (dwarf_select_sections_by_names): Add trace_info, trace_abbrevs and trace_aranges sections name. (dwarf_select_sections_all): Also select trace sections. (debug_displays): Reindent. Add entries for the trace sections. * doc/binutils.texi (readelf): Document new --dwarf parameters. (objdump): Ditto.	16 years ago
Tristan Gingold	6540b386f0	bfd/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. bfd/doc/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. binutils/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. * doc/Makefile.in: Ditto. gas/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. * doc/Makefile.in: Ditto. gprof/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. ld/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto. opcodes/ 2010-05-07 Tristan Gingold <gingold@adacore.com> * Makefile.in: Regenerate with automake 1.11.1. * aclocal.m4: Ditto.	16 years ago
Thomas Schwinge	ba7f26422c	2010-03-25 Thomas Schwinge <thomas@codesourcery.com> * doc/binutils.texi (readelf) <unwind information>: Mention support for ARM unwind tables.	16 years ago
Nick Clifton	826fec2f76	PR binutils/11298 * doc/binutils.texi (windmc): Fix synopsis and description of ASCII options.	16 years ago
H.J. Lu	2c610e4b46	Add --dyn-syms to readelf binutils/ 2010-01-11 H.J. Lu <hongjiu.lu@intel.com> PR ld/11146 * NEWS: Mention --dyn-syms for readelf. * readelf.c (do_dyn_syms): New. (OPTION_DYN_SYMS): Likewise. (options): Add "dyn-syms". (usage): Add --dyn-syms. (parse_args): Handle OPTION_DYN_SYMS. (process_symbol_table): Handle do_dyn_syms. (process_object): Likewise. (process_archive): Likewise. * doc/binutils.texi: Document --dyn-syms for readelf. Mention symbol hash tables for -D. ld/testsuite/ 2010-01-11 H.J. Lu <hongjiu.lu@intel.com> PR ld/11146 * ld-elf/dynsym1.d: New.	16 years ago
Ralf Wildenhues	3725885a65	Sync Libtool from GCC. /: * libtool.m4: Sync from git Libtool. * ltmain.sh: Likewise. * ltoptions.m4: Likewise. * ltversion.m4: Likewise. * lt~obsolete.m4: Likewise. sim/iq2000/: * configure: Regenerate. sim/d10v/: * configure: Regenerate. sim/m32r/: * configure: Regenerate. sim/frv/: * configure: Regenerate. sim/: * avr/configure: Regenerate. * cris/configure: Regenerate. * microblaze/configure: Regenerate. sim/h8300/: * configure: Regenerate. sim/mn10300/: * configure: Regenerate. sim/erc32/: * configure: Regenerate. sim/arm/: * configure: Regenerate. sim/m68hc11/: * configure: Regenerate. sim/lm32/: * configure: Regenerate. sim/sh64/: * configure: Regenerate. sim/v850/: * configure: Regenerate. sim/cr16/: * configure: Regenerate. sim/moxie/: * configure: Regenerate. sim/m32c/: * configure: Regenerate. sim/mips/: * configure: Regenerate. sim/mcore/: * configure: Regenerate. sim/sh/: * configure: Regenerate. gprof/: * Makefile.in: Regenerate. * configure: Regenerate. opcodes/: * Makefile.in: Regenerate. * configure: Regenerate. gas/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. ld/: * configure: Regenerate. gdb/testsuite/: * gdb.cell/configure: Regenerate. binutils/: * Makefile.in: Regenerate. * configure: Regenerate. * doc/Makefile.in: Regenerate. bfd/: * Makefile.in: Regenerate. * configure: Regenerate. bfd/doc/: * Makefile.in: Regenerate.	17 years ago
H.J. Lu	dd35de7434	Add --input-type and --output-type to elfedit binutils/ 2010-01-08 H.J. Lu <hongjiu.lu@intel.com> * elfedit.c (input_elf_type): New. (output_elf_type): Likewise. (elf_type): Likewise. (update_elf_header): Support updating ELF file type. (command_line_switch): Add OPTION_INPUT_TYPE and OPTION_OUTPUT_TYPE. (options): Likewise. (usage): Add --input-type and --output-type. (main): Handle OPTION_INPUT_TYPE and OPTION_OUTPUT_TYPE. Check one of --output-mach and --output-type must be specified. * doc/binutils.texi: Document --input-type and --output-type for elfedit. binutils/testsuite/ 2010-01-08 H.J. Lu <hongjiu.lu@intel.com> * binutils-all/elfedit-2.d: New. * binutils-all/elfedit.exp: Run elfedit-2.	17 years ago
H.J. Lu	c7a795f842	Fix a typo 2010-01-08 H.J. Lu <hongjiu.lu@intel.com> * doc/binutils.texi: Fix a typo.	17 years ago
H.J. Lu	ed22650ea5	2010-01-07 H.J. Lu <hongjiu.lu@intel.com> * doc/binutils.texi: Replace -histogram with --histogram.	17 years ago
H.J. Lu	30fd33bb93	Add elfedit binutils/ 2010-01-06 H.J. Lu <hongjiu.lu@intel.com> PR binutils/11131 * Makefile.am (ELFEDIT_PROG): New. (bin_PROGRAMS): Add $(ELFEDIT_PROG). (CFILES): Add elfedit.c. (elfedit_DEPENDENCIES): New. (elfedit_SOURCES): Likewise. (elfedit_LDADD): Likewise. * Makefile.in: Regenerated. * elfedit.c: New. * doc/binutils.texi: Document elfedit. * doc/Makefile.am (man_MANS): Add elfedit.1. (elfedit.1): New. * doc/Makefile.in: Regenerated. binutils/testsuite/ 2010-01-06 H.J. Lu <hongjiu.lu@intel.com> PR binutils/11131 * binutils-all/elfedit-1.d: New. * binutils-all/elfedit.exp: Likewise. * config/default.exp (ELFEDIT): New. Set if it doesn't exist. (ELFEDITFLAGS): Likewise. * lib/utils-lib.exp (run_dump_test): Support elfedit.	17 years ago
Nick Clifton	91d6fa6a03	Add -Wshadow to the gcc command line options used when compiling the binutils. Fix up all warnings generated by the addition of this switch.	17 years ago
Tristan Gingold	68cdf72f1e	2009-12-10 Tristan Gingold <gingold@adacore.com> * addr2line.c (pretty_print): New variable. (long_options): Add an entry for -p/--pretty-print. (usage): Document -p/--pretty-print. (translate_addresses): Handle pretty_print. Reindent. (main): Handle option -p. * doc/binutils.texi (addr2line): Document -p/--pretty-print. * NEWS: Mention new feature.	17 years ago
Tristan Gingold	be6f64938f	2009-12-09 Tristan Gingold <gingold@adacore.com> * addr2line.c (translate_addresses): Display addresses if option -a is used. (with_addresses): New variable. (long_options): Add option '-a'. (usage): Add usage for option '-a'. (main): Handle option '-a'. * doc/binutils.texi (addr2line): Document option '-a'. * NEWS: Mention new feature.	17 years ago
Nick Clifton	f9f0e73285	PR binutils/11045 * dwarf.c (do_debug_pubtypes): New variable. (dwarf_select_sections_by_names): Handle .debug_pubtypes. (dwarf_select_sections_by_letters): Add 't' for .debug_pubtype. (dwarf_select_sections_all): Set do_debug_pubtypes. (debug_displays): Add support for .debug_pubtypes. * dwarf.h (do_debug_pubtypes): Export. * objdump.c (usage): Add -wt or --dwarf=pubtypes. * readelf.c (usage): Likewise. (process_section_headers): Enable debug display if do_debug_pubtypes is set. * doc/binutils.texi: Document -wt/--dwarf=pubtypes option.	17 years ago
Kai Tietz	36d21de541	2009-10-28 Kai Tietz <kai.tietz@onevision.com> * dlltool.c (leading_underscore): New local variable. (asm_prefix): Interpret leading_underscore. (xlate): Likewise. (add_excludes): Use leading_underscore for making symbol name. (gen_exp_file): Use leading_underscore for internal _imp_ symbols. (usage): Add display of --no-leading-underscore and --leading-underscore option. (OPTION_NO_LEADING_UNDERSCORE): New. (OPTION_LEADING_UNDERSCORE): New. (long_options): Add --no-leading-underscore and --leading-underscore option. (main): Handle new options. * doc/binutils.text: Add documentation of the options --no-leading-underscore and --leading-underscore.	17 years ago
Kai Tietz	bf201fddaa	2009-10-23 Kai Tietz <kai.tietz@onevision.com> * deflex.l: Allow '<' and '>' in ID names. * defparse.y (EQUAL): New token constant. (opt_import_name): New rule for emptry or '==' ID. (expline): Add opt_import_name as last line element. (impline): Likewise. * dlltool.c (ifunct): New member its_name. (export): Likewise. (append_import): Add its_name argument. (defexports): Likewise. (defimport): Likewise. (scan_drectve_symbols): Adjust calls to def_exports. (dump_def_info): Print new optinal import/export table symbol name. (generate_idata_ofile): Use its_name member. (make_one_lib_file): Likewise. (nfunc): Take its_name in account on sort. * dlltool.h (def_exports): Add its_name as argument. (def_import): Likewise. * doc/binutils.texi: Add new def file syntax extension. * deflex.l (EQUAL): Add rule for '=='. * NEWS: Mention new feature. 2009-10-23 Kai Tietz <kai.tietz@onevision.com> * binutils-all/dlltool.exp: Add new test. * binutils-all/alias-2.def: New file.	17 years ago
Nick Clifton	1ed06042db	* readelf.c (usage): Add mention of --debug-dump=frames-interp. Wrap output to 80 columns. * objdump.c (usage): Likewise. * doc/binutils.texi (readelf): Add note about =frames-interp.	17 years ago
Nick Clifton	94454bb4c9	* doc/binutils.texi (c++filt): Remove spurious description of nonexistent --java command line switch for cxxfilt.	17 years ago
Nick Clifton	8b31b6c4c8	* obcopy.c (copy_object): New parameter `input_arch', architecture of input file, if not specified in input file itself; all callers updated; `binary_architecture' hack removed. (copy_archive, copy_file): New parameter `input_arch', for `copy_object' usage. (copy_main): Accept `-B' (`--binary-architecture') option also for any arch-less input ifile format, not only `binary'; remove bfd_external_binary_architecture hack; instead, add `input_arch' to calls to `copy_file'. * windres.c, windmc.c : Obsolete and useless external references to `bfd_external_binary_architecture' or `bfd_external_machine' removed. * binary.c (binary_object_p): Remove bfd_external_binary_architecture hack. objcopy `-B' (`--binary-architecture') option is now handled in a generic way.	17 years ago
Dave Korn	10e636d21e	2009-09-04 Timo Kreuzer <timo.kreuzer@web.de> * dlltool.c (delayimp_name): Add new global variable (usage, long_options, main): Add new option "-y" / "--output-delaylib" (struct mac): Add fields how_dljtab_size, how_dljtab_roff1, how_dljtab_roff2, how_dljtab, trampoline. (i386_dljtab): Add binary stub for x86 delay import. (i386_trampoline): Add text assembly stub for x86 delay import. (mtable): Add delay import data for M386 and MX86 only. (make_delay_head): New function. (make_one_lib_file): New arg delay creates delay-load import stub. (gen_lib_file): New arg delay likewise. (HOW_JTAB, HOW_JTAB_SIZE, HOW_JTAB_ROFF): New arg delay likewise. (HOW_JTAB_ROFF2, HOW_JTAB_ROFF3): New macros for delay import. (make_tail): Convert hard TABS embedded in strings to "\t" escapes. * NEWS: Mention new feature. Also fix whitespace. * doc/binutils.texi: Updated dlltool documentation.	17 years ago
Dave Korn	b96fec5e99	* doc/binutils.texi (--only-keep-debug): Relocate stray para here ... (--subsystem): ... from here.	17 years ago
Ralf Wildenhues	af542c2e31	Cleanups after the update to Autoconf 2.64, Automake 1.11. /: * README-maintainer-mode: Point directly to upstream locations for autoconf, automake, libtool, gettext, instead of copies on sources.redhat.com. Document required versions. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gdb/: * CONTRIBUTE: Bump documented Autoconf version. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gdb/doc/: * gdbint.texinfo (Releasing GDB): Point to README-maintainer-mode file for required autoconf version. * configure.ac: Do not substitute datarootdir, htmldir, pdfdir, docdir. Do not process --with-datarootdir, --with-htmldir, --with-pdfdir, --with-docdir. * configure: Regenerate. gprof/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (install-pdf-recursive, html__strip_dir, install-html) (install-html-am, install-html-recursive): Remove. * Makefile.in: Regenerate. opcodes/: * Makefile.am (install-pdf, install-html): Remove. * Makefile.in: Regenerate. gas/: * Makefile.am (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * doc/Makefile.in: Regenerate. ld/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (install-pdf-recursive, html__strip_dir, install-html) (install-html-am, install-html-recursive): Remove. * Makefile.in: Regenerate. binutils/: * Makefile.am (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. * doc/Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * doc/Makefile.in: Regenerate. bfd/: * Makefile.am (datarootdir, docdir, htmldor, pdfdir) (install-pdf, install-pdf-recursive, install-html) (install-html-recursive): Remove. * Makefile.in: Regenerate. bfd/doc/: * Makefile.am (pdf__strip_dir, install-pdf, install-pdf-am) (html__strip_dir, install-html, install-html-am): Remove. * Makefile.in: Regenerate.	17 years ago
Ralf Wildenhues	81ecdfbb4d	Regenerate tree using Autoconf 2.64 and Automake 1.11. config/: * override.m4 (_GCC_AUTOCONF_VERSION): Bump to 2.64. /: * configure: Regenerate. etc/: * configure: Regenerate. sim/common/: * config.in: Regenerate. * configure: Likewise. sim/iq2000/: * config.in: Regenerate. * configure: Likewise. sim/d10v/: * config.in: Regenerate. * configure: Likewise. sim/igen/: * config.in: Regenerate. * configure: Likewise. sim/m32r/: * config.in: Regenerate. * configure: Likewise. sim/frv/: * config.in: Regenerate. * configure: Likewise. sim/: * avr/config.in: Regenerate. * avr/configure: Likewise. * configure: Likewise. * cris/config.in: Likewise. * cris/configure: Likewise. sim/h8300/: * config.in: Regenerate. * configure: Likewise. sim/mn10300/: * config.in: Regenerate. * configure: Likewise. sim/ppc/: * config.in: Regenerate. * configure: Likewise. sim/erc32/: * config.in: Regenerate. * configure: Likewise. sim/arm/: * config.in: Regenerate. * configure: Likewise. sim/m68hc11/: * config.in: Regenerate. * configure: Likewise. sim/lm32/: * config.in: Regenerate. * configure: Likewise. sim/sh64/: * config.in: Regenerate. * configure: Likewise. sim/v850/: * config.in: Regenerate. * configure: Likewise. sim/cr16/: * config.in: Regenerate. * configure: Likewise. sim/moxie/: * config.in: Regenerate. * configure: Likewise. sim/m32c/: * config.in: Regenerate. * configure: Likewise. sim/mips/: * config.in: Regenerate. * configure: Likewise. sim/mcore/: * config.in: Regenerate. * configure: Likewise. sim/testsuite/d10v-elf/: * configure: Regenerate. sim/testsuite/: * configure: Regenerate. sim/testsuite/frv-elf/: * configure: Regenerate. sim/testsuite/m32r-elf/: * configure: Regenerate. sim/testsuite/mips64el-elf/: * configure: Regenerate. sim/sh/: * config.in: Regenerate. * configure: Likewise. gold/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * testsuite/Makefile.in: Likewise. gprof/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * configure: Likewise. * gconfig.in: Likewise. opcodes/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gas/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. ld/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. gdb/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. * gnulib/Makefile.in: Likewise. gdb/doc/: * configure: Regenerate. gdb/gdbserver/: * aclocal.m4: Regenerate. * config.in: Likewise. * configure: Likewise. gdb/testsuite/: * configure: Regenerate. * gdb.hp/configure: Likewise. * gdb.hp/gdb.aCC/configure: Likewise. * gdb.hp/gdb.base-hp/configure: Likewise. * gdb.hp/gdb.compat/configure: Likewise. * gdb.hp/gdb.defects/configure: Likewise. * gdb.hp/gdb.objdbg/configure: Likewise. * gdb.stabs/configure: Likewise. binutils/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. * doc/Makefile.in: Likewise. bfd/: * Makefile.in: Regenerate. * aclocal.m4: Likewise. * config.in: Likewise. * configure: Likewise. bfd/doc/: * Makefile.in: Regenerate. readline/: * configure: Regenerate. readline/examples/rlfe/: * configure: Regenerate.	17 years ago
Nick Clifton	3e7a7d11f1	* config/obj-elf.c (obj_elf_type): Add code to support a type of gnu_unique_object. * doc/as.texinfo: Document new feature of .type directive. * NEWS: Mention support for gnu_unique_object symbol type. * common.h (STB_GNU_UNIQUE): Define. * NEWS: Mention the linker's support for symbols with a binding of STB_GNU_UNIQUE. * gas/elf/type.s: Add unique global symbol definition. * gas/elf/type.e: Add expected readelf output for global unique symbol. * elfcpp.h (enum STB): Add STB_GNU_UNIQUE. * readelf.c (get_symbol_binding): For Linux targeted files return UNIQUE for symbols with the STB_GNU_UNIQUE binding. * doc/binutils.texi: Document the meaning of the 'u' symbol binding in the output of nm and objdump --syms. * elf-bfd.h (struct elf_link_hash_entry): Add unique_global field. * elf.c (swap_out_syms): Set binding to STB_GNU_UNIQUE for symbols with the BSF_GNU_UNIQUE flag bit set. * elfcode.h (elf_slurp_symbol_table): Set the BSF_GNU_UNIQUE flag for symbols with STB_GNU_UNIQUE binding. * elflink.c (_bfd_elf_merge_symbol): Set unique_global for symbols with the STB_GNU_UNIQUE binding. (elf_link_add_object_symbols): Set the BSF_GNU_UNIQUE flag for symbols with STB_GNU_UNIQUE binding. Set STB_GNU_UNIQUE for symbols with the unique_global field set. (elf_link_output_extsym): Set unique_global field for symbols with the STB_GNU_UNIQUE binding. * syms.c (struct bfd_symbol): Define BSF_GNU_UNIQUE flag bit. (bfd_print_symbol_vandf): Print a 'u' character for BSF_GNU_UNIQUE symbols. (bfd_decode_symclass): Return a 'u' character for BSF_GNU_UNIQUE symbols. * bfd-in2.h: Regenerate.	17 years ago
H.J. Lu	3dcb3fcb14	2009-07-20 H.J. Lu <hongjiu.lu@intel.com> * NEWS: Mention --insn-width. * objdump.c (insn_width): New. (usage): Display --insn-width. (option_values): Add OPTION_INSN_WIDTH. (long_options): Add --insn-width. (disassemble_bytes): Handle insn_width. (main): Handle OPTION_INSN_WIDTH. * doc/binutils.texi: Document --insn-width.	17 years ago
Nick Clifton	cf13d6995d	* dwarf.c (display_debug_lines_raw): Include the name of the section in warning message. (struct debug_display): Enable reloc processing for .debug_line and .debug_ranges sections. * readelf.c: Add --relocated-dump command line option to dump the relocated contents of a specified section. (request_dump): New function. (parse_args): Use it. (dump_section_as_bytes): Add parameter to indicate whether the contents should be relocated. (target_specific_reloc_handling): Add code for a R_MN10300_16 reloc found after a R_MN10300_SYM_DIFF reloc. (debug_apply_relocations): Rename to apply_relocations. (get_section_contents): New function. Replaces common code found in dump_section_as_strings and dump_section_as_bytes. * doc/binutils.texi: Document new command line option. * NEWS: Mention the new feature.	17 years ago
Nick Clifton	0313a2b8d2	PR 10288 * arm-dis.c (print_insn_coprocessor): Check that a user specified ARM architecture supports the matched instruction. (print_insn_arm): Likewise. (select_arm_features): New function. Fills in the fields of an arm_feature_set structure based on a given arm machine number. (print_insn): Initialise an arm_feature_set structure. * objdump.c (disassemble_bytes): Set the USER_SPECIFIED_MACHINE_TYPE flag in the disassemble_info structure if the user has invoked the -m switch. * doc/binutils.texi: Document the additional behaviour of objdump's -m switch for ARM targets. * dis-asm.h (USER_SPECIFIED_MACHINE_TYPE): New value for the flags field of struct disassemble_info. * gas/arm/align.s: Add labels so that COFF based targets can correctly locate THUMB code. * gas/arm/copro.d: Do not pass --architecture switch to objdump.	17 years ago
Alan Modra	1533edfb9f	PR 10199 * doc/binutils.texi (nm): Correct -S description.	17 years ago
Nick Clifton	5691d22d50	* plugins.m4: New. * aclocal.m4: Include ../config/plugins.m4. * configure.in: Use AC_PLUGINS. * configure: Regenerate. * Makefile.in: Regenerate. * doc/Makefile.in: Regenerate.	17 years ago
Nick Clifton	ce3c775b8f	* Makefile.am: Run "make dep-am". (AM_CPPFLAGS): New. (LIBDL): New. (ALL_MACHINES): Add cpu-plugin.lo. (ALL_MACHINES_CFILES): Add cpu-plugin.c. (BFD32_BACKENDS): Add plugin.lo. (BFD32_BACKENDS_CFILES): Add plugin.c. (libbfd_la_LIBADD): Add LIBDL * archures.c (bfd_architecture): Add bfd_arch_plugin. (bfd_plugin_arch): Declare. * bfd-in.h (BFD_SUPPORTS_PLUGINS): New. * bfd.c (bfd): Add plugin_data. * config.bfd: Handle the plugin target. * configure.in: Check for --enable-plugins. (LT_INIT): Use the dlopen option. * cpu-plugin.c: New. * plugin.c: New. * plugin.h: New. * targets.c (plugin_vec): Declare. (_bfd_target_vector): Add plugin_vec. * Makefile.in: Regenerate. * bfd-in2.h: Regenerate. * configure: Regenerate. * ar.c: Include plugin.h. (main): Handle the --plugin option. * nm.c: Include plugin.h. (OPTION_PLUGIN): New. (long_options): Add plugin. (main): Handle OPTION_PLUGIN. * NEWS: Mention the new feature. * doc/binutils: Documement the new command line options. * configure.in: Check for --enable-plugins. * configure: Regenerate.	17 years ago
H.J. Lu	d911860251	bfd/ 2009-04-17 H.J. Lu <hongjiu.lu@intel.com> * peXXigen.c (_bfd_XX_print_private_bfd_data_common): Replace IMAGE_SUBSYSTEM_EFI_ROM with IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER. binutils/ 2009-04-17 H.J. Lu <hongjiu.lu@intel.com> * objcopy.c (set_pe_subsystem): Replace efi-rom with sal-rtd. * doc/binutils.texi: Likewise. include/coff/ 2009-04-17 H.J. Lu <hongjiu.lu@intel.com> * pe.h (IMAGE_SUBSYSTEM_EFI_ROM): Renamed to ... (IMAGE_SUBSYSTEM_SAL_RUNTIME_DRIVER): This.	17 years ago
H.J. Lu	92dd451149	bfd/ 2009-04-17 H.J. Lu <hongjiu.lu@intel.com> PR binutils/10074 * coffcode.h (bfd_pei_p): New. * config.bfd: Remove bfd_efi_bsdrv_ia32_vec, bfd_efi_rtdrv_ia32_vec, bfd_efi_bsdrv_x86_64_vec, bfd_efi_rtdrv_x86_64_vec, bfd_efi_bsdrv_ia64_vec and bfd_efi_rtdrv_ia64_vec. Replace bfd_efi_app_ia32_vec, bfd_efi_app_x86_64_vec and bfd_efi_app_ia64_vec with i386pei_vec, x86_64pei_vec and bfd_pei_ia64_vec, respectively. * configure.in: Remove bfd_efi_bsdrv_ia32_vec, bfd_efi_rtdrv_ia32_vec, bfd_efi_bsdrv_x86_64_vec, bfd_efi_rtdrv_x86_64_vec, bfd_efi_bsdrv_ia64_vec and bfd_efi_rtdrv_ia64_vec. Replace bfd_efi_ia64_vec with bfd_pei_ia64_vec. * targets.c: Likewise. * configure: Regenerated. * libcoff.h: Likewise. * Makefile.in: Likewise. * efi-app-ia32.c: Removed. * efi-app-x86_64.c: Likewise. * efi-bsdrv-ia32.c: Likewise. * efi-bsdrv-ia64.c: Likewise. * efi-bsdrv-x86_64.c: Likewise. * efi-rtdrv-ia32.c: Likewise. * efi-rtdrv-ia64.c: Likewise. * efi-rtdrv-x86_64.c: Likewise. * efi-rtdrv-ia32.c: Likewise. * efi-app-ia64.c: Moved to ... * pei-ia64.c: This. (TARGET_SYM): Set to bfd_pei_ia64_vec. (TARGET_NAME): Set to pei-ia64. * libpei.h (bfd_target_pei_p): Removed. (bfd_target_pei_arch): Likewise. (bfd_target_efi_app_p): Likewise. (bfd_target_efi_app_arch): Likewise. (bfd_target_efi_bsdrv_p): Likewise. (bfd_target_efi_bsdrv_arch): Likewise. (bfd_target_efi_rtdrv_p): Likewise. (bfd_target_efi_rtdrv_arch): Likewise. (bfd_pe_executable_p): Likewise. * Makefile.am (BFD32_BACKENDS): Remove efi-app-ia32.lo, efi-bsdrv-ia32.lo and efi-rtdrv-ia32.lo. (BFD32_BACKENDS_CFILES): Remove efi-app-ia32.c, efi-bsdrv-ia32.c and efi-rtdrv-ia32.c. (BFD64_BACKENDS): Remove efi-app-ia64.lo, efi-bsdrv-ia64.lo, efi-rtdrv-ia64.lo, efi-app-x86_64.lo, efi-bsdrv-x86_64.lo and efi-rtdrv-x86_64.lo. Add pei-ia64.lo. (BFD64_BACKENDS_CFILES): Remove efi-app-ia64.c, efi-bsdrv-ia64.c, efi-rtdrv-ia64.c, efi-app-x86_64.c, efi-bsdrv-x86_64.c and efi-rtdrv-x86_64.c. Add pei-ia64.c. (efi-app-ia64.lo): Removed. (efi-bsdrv-ia32.lo): Likewise. (efi-rtdrv-ia32.lo): Likewise. (efi-app-ia64.lo): Likewise. (efi-bsdrv-ia64.lo): Likewise. (efi-rtdrv-ia64.lo): Likewise. (efi-app-x86_64.lo): Likewise. (efi-bsdrv-x86_64.lo): Likewise. (efi-rtdrv-x86_64.lo): Likewise. (pei-ia64.lo): New. * peicode.h (coff_swap_scnhdr_in): Replace bfd_pe_executable_p with bfd_pei_p. (arch_type): Removed. (pe_arch): Likewise. (pe_bfd_object_p): Just return coff_object_p. * peXXigen.c (_bfd_XXi_swap_scnhdr_out): Replace bfd_pe_executable_p with bfd_pei_p. binutils/ 2009-04-17 H.J. Lu <hongjiu.lu@intel.com> PR binutils/10074 * objcopy.c: Include coff/i386.h and coff/pe.h. (pe_file_alignment): New. (pe_heap_commit): Likewise. (pe_heap_reserve): Likewise. (pe_image_base): Likewise. (pe_section_alignment): Likewise. (pe_stack_commit): Likewise. (pe_stack_reserve): Likewise. (pe_subsystem): Likewise. (pe_major_subsystem_version): Likewise. (pe_minor_subsystem_version): Likewise. (set_pe_subsystem): Likewise. (convert_efi_target): Likewise. (command_line_switch): Add OPTION_FILE_ALIGNMENT, OPTION_HEAP, OPTION_IMAGE_BASE, OPTION_SECTION_ALIGNMENT, OPTION_STACK and OPTION_SUBSYSTEM. (copy_options): Likewise. (copy_usage): Add --file-alignment, --heap, --image-base, --section-alignment, --stack and --subsystem. (copy_object): Set up PE parameters. (copy_main): Process Add OPTION_FILE_ALIGNMENT, OPTION_HEAP, OPTION_IMAGE_BASE, OPTION_SECTION_ALIGNMENT, OPTION_STACK and OPTION_SUBSYSTEM. Convert EFI target to PEI target. * NEWS: Mention --file-alignment, --heap, --image-base, --section-alignment, --stack and --subsystem command line options for objcopy. * doc/binutils.texi: Document --file-alignment, --heap, --image-base, --section-alignment, --stack and --subsystem command line options for objcopy.	17 years ago
Dave Korn	0408dee693	bfd/ChangeLog * coffgen.c (make_a_section_from_file): Set the backend long section names enable if long section names found on input. * coffcode.h: Extend long section names documentation to match. binutils/ChangeLog * objcopy.c (enum long_section_name_handling): New enum type. (enum command_line_switch): Add OPTION_LONG_SECTION_NAMES. (copy_options[]): Add entry for --long-section-names option. (copy_usage): Document it. (set_long_section_mode): New subroutine. (copy_file): Call it. (copy_main): Accept OPTION_LONG_SECTION_NAMES and parse arg. * doc/binutils.texi: Update objcopy documentation with details of new option.	17 years ago
Nick Clifton	ffbe5983cb	PR 9972 * doc/binutils.texi (strings): Document the -V alias for the --version option. * strings.c (usage): Likewise.	17 years ago
Chris Demetriou	36e4dce69d	[bfd/ChangeLog] 2009-03-11 Chris Demetriou <cgd@google.com> * bfd.c (BFD_DETERMINISTIC_OUTPUT): New flag. * bfd-in2.h: Regenerate. * archive.c (bfd_ar_hdr_from_filesystem): If BFD_DETERMINISTIC_OUTPUT flag is set, use 0 for uid, gid, and timestamp, and use 0644 for file mode. (bsd_write_armap): Likewise. (_bfd_archive_bsd_update_armap_timestamp): If BFD_DETERMINISTIC_OUTPUT flag is set, do nothing. (coff_write_armap): If BFD_DETERMINISTIC_OUTPUT flag is set, use 0 for timestamp. [binutils/ChangeLog] 2009-03-11 Chris Demetriou <cgd@google.com> * ar.c (deterministic): New global variable. (main): Recognize new 'D' option, which enables 'deterministic mode'. (usage): Document new 'D' option. (write_archive): Set BFD_DETERMINISTIC_OUTPUT in output archive's flags if deterministic mode was requested. * doc/binutils.texi (ar): Document deterministic mode ('D' option). [binutils/testsuite/ChangeLog] 2009-03-11 Chris Demetriou <cgd@google.com> * binutils-all/ar.exp (deterministic_archive): New test.	17 years ago

1 2 3 4 5

232 Commits (0a394bfbada7defad3dff1fdcaa86e0e5a13c656)