(AC_FUNC_SETPGRP): Add.
* aclocal.m4, configure, config.in: Regenerated.
* inflow.c (gdb_setpgid): Get rid of NEED_POSIX_SETPGID and
SETPGRP_ARGS. Always use setpgid if it is available, fall back on
setpgrp if it isn't. Use SETPGRP_VOID (defined by autoconf) to
distinguish between the two setpgrp flavours.
* config/xm-sysv4.h, config/arm/xm-linux.h,
config/i386/xm-i386aix.h, config/i386/xm-sco.h,
config/i386/xm-linux.h, config/i386/xm-ptx.h,
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/sparc/xm-sun4sol2.h,
config/ia64/xm-linux.h (NEED_POSIX_SETPGID): Remove.
* config/rs6000/xm-rs6000.h (SETPGRP_ARGS): Remove.
<sys/sysctl.h>.
(store_inferior_registers): Wrap long line.
(i386bsd_dr_get_status): Fix typo in comment.
(_initialize_i386bsd_nat): New function. * i386bsd-tdep.c: New
file. * config/i386/tm-fbsd.h (IN_SIGTRAMP): New define.
(i386bsd_in_sigtramp): New prototype.
(SIGTRAMP_START, SIGTRAMP_END): Redefine in terms...
(i386bsd_sigtramp_start, i386bsd_sigtramp_end): ...these new
(external) variables.
(SIGCONTEXT_PC_OFFSET): Removed.
(FRAME_SAVED_PC): New define.
(i386bsd_frame_saved_pc): New function. * config/i386/fbsd.mt
(TDEPFILES): Add i386bsd-tdep.o.
config/m68k/xm-linux.h, config/powerpc/xm-linux.h,
config/sparc/xm-linux.h, config/ia64/xm-linux.h (HAVE_TERMIOS):
Removed. Taken care of by autoconf and terminal.h.
* config/sh/tm-sh.h (struct gdbarch_tdep): Add
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM fields.
* sh-tdep.c (sh_skip_prologue_hard_way): Rename from
skip_prologue_hard_way().
(skip_prologue_hard_way): Make it a function pointer.
(sh_print_register): Use function pointer do_pseudo_register,
instead of sh_do_pseudo_register.
(sh_do_registers_info): Ditto.
(sh_gdbarch_init): Initialize do_pseudo_register.
(IS_MOV_TO_R14): Rename from IS_MOV_R14.
(skip_prologue_hard_way): Update.
(sh_gdbarch_init): Move setting of frame_chain,
get_saved_register, init_extra_frame_info, push_arguments,
extract_return_value, pop_frame, store_struct_return,
extract_struct_value_address, use_struct_convention,
init_extra_frame_info to before target specific settings.
(sh_gdbarch_init): Initialize new tdep fields
FLOAT_ARGLAST_REGNUM, RETURN_REGNUM, ARG0_REGNUM, ARGLAST_REGNUM,
PR_REGNUM.
(sh_push_arguments): Use new gdbarch_tdep fields
{ARG0,ARGLAST}_REGNUM.
(sh_saved_pc_after_call, sh_nofp_frame_init_saved_regs,
sh_init_extra_frame_info, sh_push_return_address,
sh_generic_show_regs, sh3_show_regs, sh3e_show_regs,
sh3_dsp_show_regs, sh4_show_regs, sh_dsp_show_regs): Update to use
gdbarch_tdep->PR_REGNUM.
(dr_reg_base_num, fv_reg_base_num): Move to earlier in the file.
reasonable defaults for REALTIME_LO and REALTIME_HI if they're not
already defined.
* config/nm-linux.h: Include <signal.h>.
[__SIGRTMIN] (REALTIME_LO, REALTIME_HI): Define to __SIGRTMIN and
(__SIGRTMAX + 1) respectively.
* config/mips/irix6.mh: New file.
* config/mips/irix6.mt: New file.
* config/mips/xm-irix6.h: New file.
* config/mips/nm-irix6.h: New file.
* mips-tdep.c (mips_gdbarch_init) <MIPS_ABI_N32>: Set up the
disassembler info in tm_print_insn_info as appropriate for the N32
ABI. Force N32 ABI to be the default if the CPU is R8000 or
R10000.
* configure.tgt (mips*-sgi-irix6*): Map to irix6.
* configure.host (mips*-sgi-irix6*): Ditto.
* config/djgpp/fnchange.lst: Add two new files in the
gdb/testsuite/gdb.c++/ directory to the remapped names.
* config/djgpp/djconfig.sh (lt_cv_sys_max_cmd_len): Set to 12KB.
(i386_register_convertible): New function.
* config/i386/tm-i386.h (REGISTER_VIRTUAL_TYPE): Redefine in terms
of i386_register_virtual_type.
(REGISTER_CONVERTIBLE): Redefine in terms of
i386_register_convertible.
(i386_register_virtual_type, i386_register_convertible): New
prototypes.
saves in general.
* config/mn10300/tm-mn10300.h (D0_REGNUM, A0_REGNUM, MDRQ_REGNUM,
MCRH_REGNUM, MCRL_REGNUM, MCVF_REGNUM): New definitions.
(enum movm_register_bits): New enum.
* mn10300-tdep.c (set_movm_offsets): Use symbolic names for the
bits, not hex literals. Handle the `other', `exreg0', and
`exother' bits. Correct handling of `exreg1': it saves r4, r5,
r6, and r7, not r2, r3, r4, and r5.
(saved_regs_size): New function.
(mn10300_frame_chain, mn10300_frame_saved_pc): Use it, instead
of computing the same thing inline, incorrectly.
stuff out into mn10300_pop_frame_regular, and use
generic_pop_current_frame. This lets us share code, and also
makes this function's prototype match that expected by gdbarch.
Make this function static.
(mn10300_pop_frame_regular): New function.
(mn10300_gdbarch_init): Register mn10300_pop_frame as the
gdbarch's pop_frame method.
* config/mn10300/tm-mn10300.h (POP_FRAME): Delete definition.
(mn10300_pop_frame): Delete declaration.
than the tm-*.h file.
* config/mn10300/tm-mn10300.h (MAX_REGISTER_VIRTUAL_SIZE,
REGISTER_BYTES, FP_REGNUM, BREAKPOINT_FROM_PC,
FUNCTION_START_OFFSET, DECR_PC_AFTER_BREAK, INNER_THAN,
SAVED_PC_AFTER_CALL, INIT_EXTRA_FRAME_INFO, FRAME_INIT_SAVED_REGS,
FRAME_CHAIN, FRAME_CHAIN_VALID, FRAME_SAVED_PC,
EXTRACT_RETURN_VALUE, EXTRACT_STRUCT_VALUE_ADDRESS,
STORE_RETURN_VALUE, STORE_STRUCT_RETURN, SKIP_PROLOGUE,
FRAME_ARGS_SKIP, FRAME_ARGS_ADDRESS, FRAME_LOCALS_ADDRESS,
FRAME_NUM_ARGS, POP_FRAME, USE_GENERIC_DUMMY_FRAMES, CALL_DUMMY,
CALL_DUMMY_START_OFFSET, CALL_DUMMY_BREAKPOINT_OFFSET,
CALL_DUMMY_LOCATION, FIX_CALL_DUMMY, CALL_DUMMY_ADDRESS,
TARGET_READ_FP, PUSH_RETURN_ADDRESS, PUSH_DUMMY_FRAME,
SAVE_DUMMY_FRAME_TOS, PUSH_ARGUMENTS, PC_IN_CALL_DUMMY,
REG_STRUCT_HAS_ADDR, USE_STRUCT_CONVENTION, GET_SAVED_REGISTER):
Delete definitions. We register gdbarch methods for these now.
(struct frame_info, struct type, struct value): Delete forward
declarations of these types; they're no longer necessary, since we
don't have function declarations here any more.
* mn10300-tdep.c: #include "arch-utils.h", to get declarations for
some default gdbarch methods.
(mn10300_store_struct_return): Return void, as expected by
gdbarch.
(mn10300_init_extra_frame_info): Take initial `fromleaf' argument,
as expected by gdbarch.
(mn10300_frame_init_saved_regs): Provide dummy definition for
this, as required by gdbarch.
(mn10300_gdbarch_init): Add mn10300_call_dummy_words, as expected
by gdbarch. Register gdbarch methods or values for all the stuff
removed from tm-10300.h, listed above.
(rs6000_in_solib_return_trampoline): Declare.
* rs6000-tdep.c (rs6000_in_solib_return_trampoline): New
function.
(rs6000_skip_trampoline_code): Skip bigtoc fixup code.
* xcoffread.c (read_xcoff_symtab): Perform the ISFCN function
check after the CSECT check rather than before it. Allocate
separate symtabs for CSECTs whose names begin with '@'.
(scan_xcoff_symtab): Don't ignore symbols beginning with '@'.
Activate the misc_func_recorded mechanism for whose names begin
with '@'.
* config/i386/tm-i386.h (FRAMELESS_FUNCTION_INVOCATION): Redefine
in terms of i386_frameless_function_invocation. Adjust comment.
(i386_frameless_function_invocation): New prototype.
Mark Kettenis
Orjan Friberg
Daniel Jacobowitz
Elena Zannoni
Andrew Cagney
Eli Zaretskii
Nicholas Duffek
Kevin Buettner
Jim Blandy