This picks up some improvements from gcc/contrib. exceptions must
derive from BaseException, port to python3, retain original file mode,
fix name of script in examples.
Adds libsframe to list of default dirs. I would have added gprofng
too but there are some files claiming copyright by authors other than
the Free Software Foundation.
There's a command "disable probes", but SystemTap probes, for instance
libc:longjmp cannot be disabled:
...
$ gdb -q -batch a.out -ex start -ex "disable probes libc ^longjmp$"
...
Probe libc:longjmp cannot be disabled.
Probe libc:longjmp cannot be disabled.
Probe libc:longjmp cannot be disabled.
...
Add a command "maintenance ignore-probes" that ignores probes during
get_probes, such that we can easily pretend to use a libc without the
libc:longjmp probe:
...
(gdb) maint ignore-probes -verbose libc ^longjmp$
ignore-probes filter has been set to:
PROVIDER: 'libc'
PROBE_NAME: '^longjmp$'
OBJNAME: ''
(gdb) start ^M
...
Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
Ignoring SystemTap probe libc longjmp in /lib64/libc.so.6.^M
...
The "Ignoring ..." messages can be suppressed by not using -verbose.
Note that as with "disable probes", running simply "maint ignore-probes"
ignores all probes.
The ignore-probes filter can be reset by using:
...
(gdb) maint ignore-probes -reset
ignore-probes filter has been reset
...
For now, the command is only supported for SystemTap probes.
PR cli/27159
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27159
A few fixes to minor issues I've discovered in my PDB patches.
* If sizes or offsets are greater than 0x8000, they get encoded as
extended values in the same way as for enum values - e.g. a LF_ULONG
.short followed by a .long.
* I've managed to coax MSVC to produce another type, LF_VFTABLE, which
is seen when dealing with COM. I don't think LLVM emits this. Note that
we can't just implement everything in Microsoft's header files, as most
of it is obsolete.
* Fixes a stupid bug in the test program, where I was adding an index to
a size. The index was hard-coded to 0, so this didn't cause any actual
issues.
[ Partial resubmission of an earlier submission by Andrew (
https://sourceware.org/pipermail/gdb-patches/2012-September/096347.html ), so
listing him as co-author. ]
With x86_64-linux and target board unix/-m32, we have:
...
(gdb) continue^M
Continuing.^M
Exception #10^M
^M
Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M
23 throw new int (e);^M
(gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \
check FinishBreakpoint in catch()
...
The following scenario happens:
- set breakpoint in throw_exception_1, a function that throws an exception
- continue
- hit breakpoint, with call stack main.c:38 -> throw_exception_1
- set a finish breakpoint
- continue
- hit the breakpoint again, with call stack main.c:48 -> throw_exception
-> throw_exception_1
Due to the exception, the function call did not properly terminate, and the
finish breakpoint didn't trigger. This is expected behaviour.
However, the intention is that gdb detects this situation at the next stop
and calls the out_of_scope callback, which would result here in this test-case
in a rather confusing "exception did not finish" message. So the problem is
that this message doesn't show up, in other words, the out_of_scope callback
is not called.
[ Note that the fact that the situation is detected only at the next stop
(wherever that happens to be) could be improved upon, and the earlier
submission did that by setting a longjmp breakpoint. But I'm considering this
problem out-of-scope for this patch. ]
Note that the message does show up later, at thread exit:
...
[Inferior 1 (process 20046) exited with code 0236]^M
exception did not finish ...^M
...
The decision on whether to call the out_of_scope call back is taken in
bpfinishpy_detect_out_scope_cb, and the interesting bit is here:
...
if (b->pspace == current_inferior ()->pspace
&& (!target_has_registers ()
|| frame_find_by_id (b->frame_id) == NULL))
bpfinishpy_out_of_scope (finish_bp);
...
In the case of the thread exit, the callback triggers because
target_has_registers () == 0.
So why doesn't the callback trigger in the case of the breakpoint?
Well, the b->frame_id is the frame_id of the frame of main (the frame
in which the finish breakpoint is supposed to trigger), so AFAIU
frame_find_by_id (b->frame_id) == NULL will only be true once we've
left main, at which point I guess we don't stop till thread exit.
Fix this by saving the frame in which the finish breakpoint was created, and
using frame_find_by_id () == NULL on that frame instead, such that we have:
...
(gdb) continue^M
Continuing.^M
Exception #10^M
^M
Breakpoint 3, throw_exception_1 (e=10) at py-finish-breakpoint2.cc:23^M
23 throw new int (e);^M
exception did not finish ...^M
(gdb) FAIL: gdb.python/py-finish-breakpoint2.exp: \
check FinishBreakpoint in catch()
...
Still, the test-case is failing because it's setup to match the behaviour that
we get on x86_64-linux with target board unix/-m64:
...
(gdb) continue^M
Continuing.^M
Exception #10^M
stopped at ExceptionFinishBreakpoint^M
(gdb) PASS: gdb.python/py-finish-breakpoint2.exp: \
check FinishBreakpoint in catch()
...
So what happens here? Again, due to the exception, the function call did not
properly terminate, but the finish breakpoint still triggers. This is somewhat
unexpected. This happens because it just so happens to be that the frame
return address at which the breakpoint is set, is also the first instruction
after the exception has been handled. This is a know problem, filed as
PR29909, so KFAIL it, and modify the test-case to expect the out_of_scope
callback.
Also add a breakpoint after setting the finish breakpoint but before throwing
the exception, to check that we don't call the out_of_scope callback too early.
Tested on x86_64-linux, with target boards unix/-m32.
Co-Authored-By: Andrew Burgess <aburgess@redhat.com>
PR python/27247
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=27247
On ubuntu 22.04.1 x86_64, I run into:
...
(gdb) PASS: gdb.base/print-symbol-loading.exp: shlib off: \
set print symbol-loading off
sharedlibrary .*^M
Symbols already loaded for /lib/x86_64-linux-gnu/libc.so.6^M
Symbols already loaded for /lib/x86_64-linux-gnu/libpthread.so.0^M
(gdb) FAIL: gdb.base/print-symbol-loading.exp: shlib off: load shared-lib
...
The test-case expects the libc.so line, but not the libpthread.so line.
However, we have:
...
$ ldd /lib/x86_64-linux-gnu/libc.so.6
linux-vdso.so.1 (0x00007ffd7f7e7000)
libgtk3-nocsd.so.0 => /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0 (0x00007f4468c00000)
/lib64/ld-linux-x86-64.so.2 (0x00007f4469193000)
libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f4468f3e000)
libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f4468f39000)
...
so it's not unexpected that libpthread.so is loaded if libc.so is loaded.
Fix this by accepting the libpthread.so line.
Tested on x86_64-linux.
PR testsuite/29919
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29919
On Ubuntu 22.04.1 x86_64, with glibc 2.35 I run into:
...
watchpoint-fork-mt.c: In function 'start':^M
watchpoint-fork-mt.c:67:7: warning: 'pthread_yield' is deprecated: \
pthread_yield is deprecated, use sched_yield instead \
[-Wdeprecated-declarations]^M
67 | i = pthread_yield ();^M
| ^^M
...
Fix this as suggested, by using sched_yield instead.
Tested on x86_64-linux.
On Ubuntu 22.04.1 x86_64 (with glibc 2.35), I run into:
...
(gdb) PASS: gdb.base/corefile.exp: $_exitcode is void
bt^M
#0 __pthread_kill_implementation (...) at ./nptl/pthread_kill.c:44^M
#1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M
#2 __GI___pthread_kill (...) at ./nptl/pthread_kill.c:89^M
#3 0x00007f4985e1a476 in __GI_raise (...) at ../sysdeps/posix/raise.c:26^M
#4 0x00007f4985e007f3 in __GI_abort () at ./stdlib/abort.c:79^M
#5 0x0000556b4ea4b504 in func2 () at gdb.base/coremaker.c:153^M
#6 0x0000556b4ea4b516 in func1 () at gdb.base/coremaker.c:159^M
#7 0x0000556b4ea4b578 in main (...) at gdb.base/coremaker.c:171^M
(gdb) PASS: gdb.base/corefile.exp: backtrace
up^M
#1 __pthread_kill_internal (...) at ./nptl/pthread_kill.c:78^M
78 in ./nptl/pthread_kill.c^M
(gdb) FAIL: gdb.base/corefile.exp: up
...
The problem is that the regexp used here:
...
gdb_test "up" "#\[0-9\]* *\[0-9xa-fH'\]* in .* \\(.*\\).*" "up"
...
does not fit the __pthread_kill_internal line which lacks the instruction
address due to inlining.
Fix this by making the regexp less strict.
Tested on x86_64-linux.
On ubuntu 22.04.1 x86_64, I run into:
...
(gdb) info probes all rtld rtld_map_complete^M
No probes matched.^M
(gdb) XFAIL: gdb.threads/dlopen-libpthread.exp: info probes all rtld rtld_map_complete
UNTESTED: gdb.threads/dlopen-libpthread.exp: no matching probes
...
This has been filed as PR testsuite/17016.
The problem is that the name rtld_map_complete is used, which was only
available in Fedora 17, and upstream the name map_complete was used.
In the email thread discussing a proposed patch (
https://sourceware.org/legacy-ml/gdb-patches/2014-09/msg00712.html ) it was
suggested to make the test-case handle both names.
So, handle both names: map_complete and rtld_map_complete.
This exposes the following FAIL:
...
(gdb) info sharedlibrary^M
From To Syms Read Shared Object Library^M
$hex $hex Yes /lib64/ld-linux-x86-64.so.2^M
$hex $hex Yes (*) /lib/x86_64-linux-gnu/libgtk3-nocsd.so.0^M
$hex $hex Yes /lib/x86_64-linux-gnu/libc.so.6^M
$hex $hex Yes /lib/x86_64-linux-gnu/libdl.so.2^M
$hex $hex Yes /lib/x86_64-linux-gnu/libpthread.so.0^M
(*): Shared library is missing debugging information.^M
(gdb) FAIL: gdb.threads/dlopen-libpthread.exp: libpthread.so not found
...
due to using a glibc (v2.35) that has libpthread integrated into libc.
Fix this by changing the FAIL into UNSUPPORTED.
Tested on x86_64-linux.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=17016
On Ubuntu 22.04.1 x86_64, I run into:
...
gdb.reverse/step-indirect-call-thunk.c: In function 'inc':^M
gdb.reverse/step-indirect-call-thunk.c:22:1: error: '-mindirect-branch' and \
'-fcf-protection' are not compatible^M
22 | { /* inc.1 */^M
| ^^M
...
Fix this by forcing -fcf-protection=none, if supported.
Tested on x86_64-linux.
On Ubuntu 22.04.1 x86_64, I run into:
...
(gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: not in inline 1
next^M
51 if (t != NULL^M
(gdb) FAIL: gdb.cp/step-and-next-inline.exp: no_header: next step 1
...
This is due to -fcf-protection, which adds the endbr64 at the start of get_alias_set:
...
0000000000001180 <_Z13get_alias_setP4tree>:
1180: f3 0f 1e fa endbr64
1184: 48 85 ff test %rdi,%rdi
...
so the extra insn gets an is-stmt line number entry:
...
INDEX LINE ADDRESS IS-STMT PROLOGUE-END
...
11 50 0x0000000000001180 Y
12 50 0x0000000000001180
13 51 0x0000000000001184 Y
14 54 0x0000000000001184
...
and when stepping into get_alias_set we step to line 50:
...
(gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main
step^M
get_alias_set (t=t@entry=0x555555558018 <xx>) at step-and-next-inline.cc:50^M
50 {^M
...
In contrast, with -fcf-protection=none, we get:
...
0000000000001170 <_Z13get_alias_setP4tree>:
1170: 48 85 ff test %rdi,%rdi
...
and:
...
INDEX LINE ADDRESS IS-STMT PROLOGUE-END
...
11 50 0x0000000000001170 Y
12 51 0x0000000000001170 Y
13 54 0x0000000000001170
...
so when stepping into get_alias_set we step to line 51:
...
(gdb) PASS: gdb.cp/step-and-next-inline.exp: no_header: in main
step^M
get_alias_set (t=t@entry=0x555555558018 <xx>) at step-and-next-inline.cc:51^M
51 if (t != NULL^M
...
Fix this by rewriting the gdb_test issuing the step command to check which
line the step lands on, and issuing an extra next if needed.
Tested on x86_64-linux, both with and without -fcf-protection=none.
PR testsuite/29920
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29920
Make comp_unit_head.length private, to enforce using accessor functions.
Replace accessor function get_length with get_length_with_initial and
get_length_without_initial, to make it explicit which variant we're using.
Tested on x86_64-linux.
PR symtab/29343
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343
This fixes a couple of places in display_debug_lines_decoded that were
off by one in checking DWARF5 .debug_line directory indices. It also
displays the DWARF5 entry 0 for the program current directory rather
than "." as is done for pre-DWARF5. I decided against displaying
DW_AT_comp_dir for pre-DWARF5 since I figure it is better for readelf
to minimally interpret debug info.
binutils/
PR 29948
* dwarf.c (display_debug_lines_decoded): Display the given
directory entry 0 for DWARF5. Properly check directory index
against number of entries in the table. Revert to using
unsigned int for n_directories and associated variables.
Correct warning messages.
gas/
* testsuite/gas/elf/dwarf-5-loc0.d: Update.
This commit makes CSR class handling for 'Smstateen' and 'Ssstateen'
extensions simpler using fall-throughs (as used in CSR_CLASS_I{,_32}).
gas/ChangeLog:
* config/tc-riscv.c (riscv_csr_address): Simplify the logic for
'Smstateen' and 'Ssstateen' extensions.
PR cli/29945 points out that "set debug timestamp 1" stopped working
-- this is a regression due to commit b8043d27 ("Remove a ui-related
memory leak").
This patch fixes the bug and adds a regression test.
I think this should probably be backported to the gdb 13 branch.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29945
When --no-keep-memory is used, the input section memory may not be cached.
Allocate input section memory for -z pack-relative-relocs if needed.
bfd/
PR ld/29939
* elfxx-x86.c (elf_x86_size_or_finish_relative_reloc): Allocate
input section memory if needed.
ld/
PR ld/29939
* testsuite/ld-elf/dt-relr-2i.d: New test.
A recent change in the XTheadFmv spec fixed an encoding bug in the
document. This patch changes the code to follow this bugfix.
Spec patch can be found here:
https://github.com/T-head-Semi/thead-extension-spec/pull/11
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
The gdb.gdb self-tests were timing out for me, which turned out to be
PR testsuite/29325. Looking into it, the problem is that the version
of the Boehm GC that is used by Guile on my machine causes a SEGV
during stack probing. This unexpected stop confuses the tests and
causes repeated timeouts.
This patch adapts the two failing tests. This makes them work for me,
and reduces the running time of gdb.gdb from 20 minutes to about 11
seconds.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29325
The naming in here has grown organically and is confusing to follow.
Originally there was only one set of rules for generating code from
the igen sources, so calling it "tmp-igen" and such made sense. But
when other multigen modes were added ("m16" & "multi") which also
used igen, it's not clear what's common igen and what's specific to
this generation mode. So rename the set of rules from "igen" to
"single" so it's easier to follow.
The m16 & multi targets generate itable once even when all the other
modules are generated multiple times. The default igen target will
generate itable with everything else out of convenience. This means
flags are passed which don't affect the generated itable there.
We can unify the itable generation by making sure the right -F/-M
filter variables are passed down. Since there's already a dedicated
rule & variable in the multi build mode, generalize that and switch
the m16 & igen builds over too.
I spent a lot of time staring at this code, building for diff mips
targets, and exploring all the shell code paths. I think this is
safe, but only time (and users) will really tell.
This variable is only used to generate the itable files. In preparation
for merging the itable logic among all ports, rename "multi_flags" to a
more appropriate "igen_itable_flags" variable. There should be no real
chagnes here otherwise.
This code appears to be unused since it was first merged. When
micromips was enabled, it was via the "MULTI" config, not the
"MICROMIPS" config, and the multi configs have sep vars. Since
nothing sets SIM_MIPS_GEN=MICROMIPS in the config, all of this
should be unreachable, so punt it to simplify. Further, the
SIM_MIPS_MICROMIPS16_FLAGS & SIM_MIPS_MICROMIPS_FLAGS settings
rely on sim_mips_micromips{,16}_{filter,machine} variables that
are never set in the configure script.
PR symtab/29343 points out that it would be beneficial if
comp_unit_head had a constructor and used initializers. This patch
implements this. I'm unsure if this is sufficient to close the bug,
but at least it's a step.
Bug: https://sourceware.org/bugzilla/show_bug.cgi?id=29343
I think the test for table->files[file].dir being non-zero is wrong
for DWARF5 where index zero is allowed and is the current directory of
the compilation. Most times this will be covered by the use of
table->comp_dir (from DW_AT_comp_dir) in concat_filename but the point
of putting the current dir in .debug_line was so the section could
stand alone without .debug_info.
Also, there is no need to check for table->dirs non-NULL, the
table->num_dirs test is sufficient.
* dwarf2.c (concat_filename): Correct and simplify tests of
directory index.
The following test was failing on ppc64 and s390x:
"FAIL: encode-1: Encode buffer match"
The offending stub was how we memcpy the FRE start address to the buffer
(on-disk format). When the host is big-endian, the address of the
source buffer for the memcpy needs to point to the uint8_t/uint16_t sized
value of the FRE start addr, not uint32_t sized value; we intend to copy
out only the fre_start_addr_sz number of bytes.
ChangeLog:
* libsframe/sframe.c (sframe_encoder_write_fre_start_addr): New
function.
(sframe_encoder_write_fre): Use it instead of memcpy.
While mips has respected sim_igen_smp at configure time (which was
always empty since it defaulted smp to off), no other igen port did.
Move this to a makefile variable and plumb it through the common
IGEN_RUN variable instead so everyone gets it by default. We also
clean up some redundant -N0 setting with multirun mips.
All the runtimes were only initializing a single CPU. When SMP is
enabled, things quickly crash as none of the other CPU structs are
setup. Change the default from 0 to the compile time value.
Alan Modra
GDB Administrator
Nick Clifton
Tom de Vries
Mark Harmstone
Tsukasa OI
Tom Tromey
H.J. Lu
Christoph Müllner
Tom Tromey
Mike Frysinger
Flavio Cruz
Indu Bhagat