Since every target typedefs this the same way, move it to the common code.
We have to leave Blackfin behind here for now because of inter-dependencies
on types and headers: sim-base.h includes sim-model.h which needs types in
machs.h which needs types in bfim-sim.h which needs SIM_CPU.
Almost every target defines sim_cia the same way -- either using the
address_word type directly, or a type of equivalent size. The only
odd one out is sh64 (who has 32bit address_word and 64bit cia), and
even that case doesn't seem to make sense. We'll put off clean up
though of sh64 and at least set up a sensible default for everyone.
The CIA_{GET,SET} macros serve the same function as CPU_PC_{GET,SET}
except the latter adds a layer of indirection via the sim state. This
lets models set up different functions at runtime and doesn't reach so
directly into the arch-specific cpu state.
It also doesn't make sense to have two sets of macros that do exactly
the same thing, so lets standardize on the one that gets us more.
Now that all the targets are utilizing CPU_PC_{FETCH,STORE}, and the
cpu state is multicore, and the STATE_CPU defines match, we can move
it all to the common code.
The previous profile change broke these sims that use sim-profile but
not sim-cpu (due to missing model support). Add simple funcs until we
can convert these over properly.
Rather than manually include tconfig.h when we think we'll need it (which
is error prone as it can define symbols we expect from config.h), have it
be included directly by config.h. Since we know we have to include that
header everywhere already, this will make sure tconfig.h isn't missed.
It should also be fine as tconfig.h is supposed to be simple and only set
up a few core defines for the target.
This allows us to stop symlinking it in place all the time and just use
it straight out of the respective source directory.
We want people to stop using the run.c frontend, but it's hard to notice
when it's still set as the default. Lets flip things so nrun.c is the
default, and users of run.c will get an error by default. We turn that
error into a warning for existing sims so we don't break them -- this is
mostly meant for people starting new ports.
* v850.igen: Add more e3v5 support.
(FMAF.S): New pattern.
(FMSF.S): New pattern.
(FNMAF.S): New pattern.
(FNMSF.S): New pattern.
(cnvq15q30): New pattern.
(cnvq30q15): New pattern.
(cnvq31q62): New pattern.
(cnvq62q31): New pattern.
(dup.h): New pattern.
(dup.w): New pattern.
(expq31): New pattern.
(modadd): New pattern.
(mov.dw): New pattern.
(mov.h): New pattern.
(mov.w): New pattern.
(pki16i32): New pattern.
(pki16ui8): New pattern.
(pki32i16): New pattern.
(pki64i32): New pattern.
(pkq15q31): New pattern.
(pkq30q31): New pattern.
(pkq31q15): New pattern.
(pkui8i16): New pattern.
(vabs.h): New pattern.
(vabs.w): New pattern.
(vadd.dw): New placeholder pattern.
(vadd.h): New placeholder pattern.
(vadd.w): New placeholder pattern.
(vadds.h): New placeholder pattern.
(vadds.w): New placeholder pattern.
(vaddsat.h): New placeholder pattern.
(vaddsat.w): New placeholder pattern.
(vand): New pattern.
(vbiq.h): New placeholder pattern.
(vbswap.dw): New placeholder pattern.
(vbswap.h): New placeholder pattern.
(vbswap.w): New placeholder pattern.
(vcalc.h): New placeholder pattern.
(vcalc.w): New placeholder pattern.
(vcmov): New placeholder pattern.
Directories that don't use libtool need to add -ldl (on most *nix
hosts) to provide dlopen for libbfd.
config/
* plugins.m4 (AC_PLUGINS): If plugins are enabled, add -ldl to
LIBS via AC_SEARCH_LIBS.
gdb/
* acinclude.m4 (GDB_AC_CHECK_BFD): Don't add -ldl.
* config.in: Regenerate.
sim/ppc/
* configure.ac: Invoke AC_PLUGINS.
* config.in: Regenerate.
and regen lots of configure files.
This removes the last uses of PARAMS from sim.
2014-01-06 Tom Tromey <tromey@redhat.com>
* README-HACKING: Don't use PARAMS.
* arm/wrapper.c: Don't use PARAMS.
* bfin/sim-main.h: Don't use PARAMS.
* common/callback.c: Don't use PARAMS.
* common/cgen-trace.c: Don't use PARAMS.
* common/run-sim.h: Don't use PARAMS.
* common/run.c: Don't use PARAMS.
* common/sim-base.h: Don't use PARAMS.
* common/sim-load.c: Don't use PARAMS.
* common/sim-options.h: Don't use PARAMS.
* common/sim-trace.c: Don't use PARAMS.
* common/sim-trace.h: Don't use PARAMS.
* common/sim-utils.h: Don't use PARAMS.
* cr16/cr16_sim.h: Don't use PARAMS.
* cr16/gencode.c: Don't use PARAMS.
* cr16/interp.c: Don't use PARAMS.
* cr16/simops.c: Don't use PARAMS.
* d10v/d10v_sim.h: Don't use PARAMS.
* d10v/gencode.c: Don't use PARAMS.
* d10v/interp.c: Don't use PARAMS.
* d10v/simops.c: Don't use PARAMS.
* erc32/erc32.c: Don't use PARAMS.
* erc32/exec.c: Don't use PARAMS.
* erc32/float.c: Don't use PARAMS.
* erc32/func.c: Don't use PARAMS.
* erc32/sis.c: Don't use PARAMS.
* erc32/sis.h: Don't use PARAMS.
* mips/interp.c: Don't use PARAMS.
* mips/sim-main.h: Don't use PARAMS.
* sh/interp.c: Don't use PARAMS.
* v850/sim-main.h: Don't use PARAMS.
* v850/v850_sim.h: Don't use PARAMS.
I noticed the sim code is using an old implementation of the maintainer logic.
I cut it over to the new macro (like gdb has been doing). In practice, it
makes no difference currently as nothing in the sim tree uses it, but I have a
follow up commit for the Blackfin tree that needs it.
(v850_bins): New function.
* simops.h: Add prototypes fir v850_rotl and v850_bins.
* v850-dc: Add entries for V850e3v5.
* v850.igen: Add support for v850e3v5.
(ld.dw, st.dw, rotl, bins): New patterns.
architecture type. Add support for bfd_mach_v850e2 and
bfd_mach_v850e2v3 machine numbers.
* v850.igen (dbtrap): Add support for SIM_OPEN_DEBUG.
(cmpf.d): Correct order of operands.
(cmpf.s): Likewise.
(trncf.dul): New pattern.
(trncf.duw): New pattern.
(trncf.sul): New pattern.
(trncf.suw): New pattern.
* v850-dc: Correct bitfield selection for TRNCF.SW and CVTF.SW.
Two modifications:
1. The addition of 2013 to the copyright year range for every file;
2. The use of a single year range, instead of potentially multiple
year ranges, as approved by the FSF.
Before POSIX standardized strsignal(), old systems would hide the
prototype unless the normal extension defines were enabled. So use
the AC_USE_SYSTEM_EXTENSIONS helper for that.
Then make sure we include string.h ourselves in nrun.c rather than
relying on implicit includes via other sim headers.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Lift the code that GDB is using to generate dependencies on the fly and
port it over to the sim. Now people shouldn't have to manually maintain
these in their Makefile's.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Automake likes to dump macros automatically used into the aclocal.m4
file, but the common/aclocal.m4 naming prevents that. So rename it
to the more normal "acinclude.m4" so the aclocal tool can work.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Now that the sourceware tree generally requires autoconf-2.64, update
the sim tree to require that too.
This allows us to drop the long standing SIM_AC_COMMON/common.m4
workaround as autoconf 2.64+ seems to work for me.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
Since sim_do_command for many people simply calls sim_args_command, start
a unified version of it. For people who handle their own options, they
could switch to this by using sim_add_option_table instead.
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
do not invoke the host's functionality directly. Invoke
sim_io_stat() instead of stat() for implementing TARGET_SYS_stat.
Implement TARGET_SYS_fstat, TARGET_SYS_rename, and TARGET_SYS_unlink.
The sim keeps track of which allocations are zero-ed internally (via
zalloc) and then calls a helper "zfree" function rather than "free".
But this "zfree" function simply calls "free" itself. Since I can
see no point in this and it is simply useless overhead, punt it.
The only real change is in hw-alloc.c where we remove the zalloc_p
tracking, and sim-utils.c where zfree is delete. The rest of the
changes are a simple `sed` from "zfree" to "free".
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
gdb/ChangeLog
* remote-sim.c (gdbsim_store_register): Update API to
sim_store_register to check more error conditions.
include/gdb/ChangeLog
* remote-sim.h (sim_store_register): Update the API
documentation for this function.
sim/erc32/ChangeLog
sim/h8300/ChangeLog
sim/m32c/ChangeLog
sim/mn10300/ChangeLog
sim/ppc/ChangeLog
sim/rx/ChangeLog
sim/v850/ChangeLog
* ???.c (sim_store_register): Update return value to
match new API.
Mike Frysinger
H.J. Lu
Nick Clifton
Joel Brobecker
Alan Modra
Roland McGrath
Tom Tromey
Joel Brobecker
Kevin Buettner
Andrew Burgess
Ralf Wildenhues