binutils run_dump_test rename not-target and not-skip

Use notarget and noskip, like the ld testsuite.

	* testsuite/binutils-all/copy-2.d,
	* testsuite/binutils-all/copy-3.d,
	* testsuite/binutils-all/copy-4.d,
	* testsuite/binutils-all/elfedit-1.d,
	* testsuite/binutils-all/note-1.d,
	* testsuite/binutils-all/note-2-64.d,
	* testsuite/binutils-all/strip-11.d,
	* testsuite/binutils-all/strip-13.d,
	* testsuite/binutils-all/strip-14.d,
	* testsuite/binutils-all/testranges.d,
	* testsuite/binutils-all/x86-64/pr23494a-x32.d,
	* testsuite/binutils-all/x86-64/pr23494a.d,
	* testsuite/binutils-all/x86-64/pr23494b-x32.d,
	* testsuite/binutils-all/x86-64/pr23494b.d,
	* testsuite/binutils-all/x86-64/pr23494c-x32.d,
	* testsuite/binutils-all/x86-64/pr23494c.d,
	* testsuite/binutils-all/x86-64/pr23494d-x32.d,
	* testsuite/binutils-all/x86-64/pr23494d.d,
	* testsuite/binutils-all/x86-64/pr23494e-x32.d,
	* testsuite/binutils-all/x86-64/pr23494e.d,
	* testsuite/lib/utils-lib.exp (run_dump_test): Replace not-target
	and not-skip with notarget and noskip.

binutils/ChangeLog

@@ -1,3 +1,28 @@
+2018-09-15  Alan Modra  <amodra@gmail.com>
+
+	* testsuite/binutils-all/copy-2.d,
+	* testsuite/binutils-all/copy-3.d,
+	* testsuite/binutils-all/copy-4.d,
+	* testsuite/binutils-all/elfedit-1.d,
+	* testsuite/binutils-all/note-1.d,
+	* testsuite/binutils-all/note-2-64.d,
+	* testsuite/binutils-all/strip-11.d,
+	* testsuite/binutils-all/strip-13.d,
+	* testsuite/binutils-all/strip-14.d,
+	* testsuite/binutils-all/testranges.d,
+	* testsuite/binutils-all/x86-64/pr23494a-x32.d,
+	* testsuite/binutils-all/x86-64/pr23494a.d,
+	* testsuite/binutils-all/x86-64/pr23494b-x32.d,
+	* testsuite/binutils-all/x86-64/pr23494b.d,
+	* testsuite/binutils-all/x86-64/pr23494c-x32.d,
+	* testsuite/binutils-all/x86-64/pr23494c.d,
+	* testsuite/binutils-all/x86-64/pr23494d-x32.d,
+	* testsuite/binutils-all/x86-64/pr23494d.d,
+	* testsuite/binutils-all/x86-64/pr23494e-x32.d,
+	* testsuite/binutils-all/x86-64/pr23494e.d,
+	* testsuite/lib/utils-lib.exp (run_dump_test): Replace not-target
+	and not-skip with notarget and noskip.
+
 2018-09-15  Alan Modra  <amodra@gmail.com>
 
 	* testsuite/binutils-all/group-7a.d,

binutils/testsuite/binutils-all/copy-2.d

@@ -3,7 +3,7 @@
 #objcopy: --set-section-flags foo=contents,alloc,load,code
 #name: copy with setting section flags 2
 #source: copytest.s
-#not-target: *-*-*aout *-*-aix* h8300-*-* hppa*-*-hpux* mips-*-ultrix* mips-*-osf* mips-*-ecoff* mips-*-irix mips-*-irix[2-4] mips-*-riscos* ns32k-*-netbsd
+#notarget: *-*-*aout *-*-aix* h8300-*-* hppa*-*-hpux* mips-*-ultrix* mips-*-osf* mips-*-ecoff* mips-*-irix mips-*-irix[2-4] mips-*-riscos* ns32k-*-netbsd
 # Note - we use copytest.s and a section named "foo" rather
 # than .text because for some file formats (eg PE) the .text
 # section has a fixed set of flags and these cannot be changed.

binutils/testsuite/binutils-all/copy-3.d

@@ -3,7 +3,7 @@
 #objcopy: --set-section-flags .text=alloc,data
 #name: copy with setting section flags 3
 #source: bintest.s
-#not-target: *-*-*aout *-*-*coff *-*-cygwin* *-*-darwin *-*-mingw* *-*-go32 *-*-*pe hppa*-*-hpux* ns32k-*-netbsd powerpc-*-aix* rs6000-*-* rx-*-*
+#notarget: *-*-*aout *-*-*coff *-*-cygwin* *-*-darwin *-*-mingw* *-*-go32 *-*-*pe hppa*-*-hpux* ns32k-*-netbsd powerpc-*-aix* rs6000-*-* rx-*-*
 # The .text # section in PE/COFF has a fixed set of flags and these
 # cannot be changed.  We skip it for them.
 

binutils/testsuite/binutils-all/copy-4.d

@@ -2,7 +2,7 @@
 #source: bintest.s
 #strip: --strip-unneeded
 #nm: -n
-#not-target: *-*-aix* *-*-linuxecoff
+#notarget: *-*-aix* *-*-linuxecoff
 #name: strip --strip-unneeded on common symbol
 
 #...

binutils/testsuite/binutils-all/elfedit-1.d

@@ -4,7 +4,7 @@
 #readelf: -h
 #name: Update ELF header 1
 #target: x86_64-*-*
-#not-target: x86_64-*-gnux32 x86_64-*-nacl*
+#notarget: x86_64-*-gnux32 x86_64-*-nacl*
 
 #...
 ELF Header:

binutils/testsuite/binutils-all/note-1.d

@@ -3,7 +3,7 @@
 #objcopy: --add-section .note=$srcdir/note-1.d
 #name: add notes section
 #source: copytest.s
-#not-target: h8300-*-*
+#notarget: h8300-*-*
 
 There are .*
 

binutils/testsuite/binutils-all/note-2-64.d

@@ -3,7 +3,7 @@
 #objcopy: --merge-notes
 #name: merge notes section (64-bits)
 #source: note-2-64.s
-#not-target: sparc64-*-*
+#notarget: sparc64-*-*
 # Internally the Sparc64 backend uses two relocs for every one reloc visible externally.
 # Unfortunately the BFD library does not provide a target specific way to delete individual
 # relocs, so the note merging feature fails.

binutils/testsuite/binutils-all/strip-11.d

@@ -4,7 +4,7 @@
 #readelf: -S --wide
 #name: strip -g empty file
 # The RL78 linker scripts always PROVIDE a __rl78_abs__ symbol so the stripped symbol table is never empty.
-#not-target: rl78-*-*
+#notarget: rl78-*-*
 
 #...
   \[ 0\] +NULL +0+ .*

binutils/testsuite/binutils-all/strip-13.d

@@ -2,7 +2,7 @@
 #strip: -g
 #error: \A[^\n]*: unsupported relocation type 0x[0-9a-f]+\n
 #error:   [^\n]*: bad value\Z
-#not-target: rx-*
+#notarget: rx-*
 # The RX targets do not complain about unrecognised relocs, unless they
 #  are actually used
 #  (which is what should really happen with the other targets...)

binutils/testsuite/binutils-all/strip-14.d

@@ -1,7 +1,7 @@
 #PROG: strip
 #strip: -g
 #error: \A[^\n]*: relocation 0 has invalid symbol index 1048560\Z
-#not-target: rx-*
+#notarget: rx-*
 # The RX targets do not complain about bad relocs, unless they are
 #  actually used
 #  (which is what should really happen with the other targets...)

binutils/testsuite/binutils-all/testranges.d

@@ -2,7 +2,7 @@
 #source: testranges.s
 #readelf: -wR --wide
 #name: unordered .debug_info references to .debug_ranges
-#not-target: ia64-*-*
+#notarget: ia64-*-*
 
 Contents of the \.z?debug_ranges section:
 

binutils/testsuite/binutils-all/x86-64/pr23494a-x32.d

@@ -3,7 +3,7 @@
 #as: --x32 -mx86-used-note=yes
 #objcopy: -O elf64-x86-64
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494a.d

@@ -3,7 +3,7 @@
 #as: --64 -defsym __64_bit__=1 -mx86-used-note=yes
 #objcopy: -O elf32-x86-64
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494b-x32.d

@@ -3,4 +3,4 @@
 #as: --x32 -mx86-used-note=yes
 #objcopy: -O elf64-x86-64 -R .note.gnu.property
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*

binutils/testsuite/binutils-all/x86-64/pr23494b.d

@@ -3,4 +3,4 @@
 #as: --64 -defsym __64_bit__=1 -mx86-used-note=yes
 #objcopy: -O elf32-x86-64 -R .note.gnu.property
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*

binutils/testsuite/binutils-all/x86-64/pr23494c-x32.d

@@ -3,7 +3,7 @@
 #as: --x32 -mx86-used-note=no
 #objcopy: -O elf64-x86-64
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494c.d

@@ -3,7 +3,7 @@
 #as: --64 -defsym __64_bit__=1 -mx86-used-note=no
 #objcopy: -O elf32-x86-64
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494d-x32.d

@@ -3,7 +3,7 @@
 #as: --x32 -mx86-used-note=yes
 #objcopy: -O elf64-x86-64 --decompress-debug-sections
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494d.d

@@ -3,7 +3,7 @@
 #as: --64 -defsym __64_bit__=1 -mx86-used-note=yes
 #objcopy: -O elf32-x86-64 --decompress-debug-sections
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494e-x32.d

@@ -3,7 +3,7 @@
 #as: --x32 -mx86-used-note=yes
 #objcopy: -O elf64-x86-64 --decompress-debug-sections
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/binutils-all/x86-64/pr23494e.d

@@ -3,7 +3,7 @@
 #as: --64 -defsym __64_bit__=1 -mx86-used-note=yes
 #objcopy: -O elf32-x86-64 --decompress-debug-sections
 #readelf: -n
-#not-target: x86_64-*-nacl*
+#notarget: x86_64-*-nacl*
 
 Displaying notes found in: .note.gnu.property
   Owner                 Data size	Description

binutils/testsuite/lib/utils-lib.exp

@@ -229,11 +229,11 @@ proc exe_ext {} {
 #	in the space-separated list each glob is passed to "istarget" and
 #	each proc is called as a TCL procedure.  List items are interpreted
 #	such that procs are denoted by surrounding square brackets, and any
-#	other items are consired globs.  If the call evaluates true for any
-#	of them, the test will be run, otherwise it will be marked
+#	other items are considered globs.  If the call evaluates true for
+#	any of them, the test will be run, otherwise it will be marked
 #	unsupported.
 #
-#   not-target: GLOB|PROC ...
+#   notarget: GLOB|PROC ...
 #	Do not run this test on a specified list of targets.  Again, each
 #	glob in the space-separated list is passed to "istarget" and each
 #	proc is called as a TCL procedure, and the test is run if it
@@ -241,8 +241,8 @@ proc exe_ext {} {
 #	unsupported.
 #
 #   skip: GLOB|PROC ...
-#   not-skip: GLOB|PROC ...
-#       These are exactly the same as "not-target" and "target",
+#   noskip: GLOB|PROC ...
+#       These are exactly the same as "notarget" and "target",
 #       respectively, except that they do nothing at all if the check
 #       fails.  They should only be used in groups, to construct a single
 #       test which is run on all targets but with variant options or
@@ -320,9 +320,9 @@ proc run_dump_test { name {extra_options {}} } {
     set opts(error_output) {}
     set opts(warning_output) {}
     set opts(target) {}
-    set opts(not-target) {}
+    set opts(notarget) {}
     set opts(skip) {}
-    set opts(not-skip) {}
+    set opts(noskip) {}
 
     foreach i $opt_array {
 	set opt_name [lindex $i 0]
@@ -440,11 +440,11 @@ proc run_dump_test { name {extra_options {}} } {
     }
 
     # Handle skipping the test on specified targets.
-    # You can have both skip/not-skip and target/not-target, but you can't
-    # have both skip and not-skip, or target and not-target, in the same file.
+    # You can have both skip/noskip and target/notarget, but you can't
+    # have both skip and noskip, or target and notarget, in the same file.
     if { $opts(skip) != "" } then {
-	if { $opts(not-skip) != "" } then {
-	    perror "$testname: mixing skip and not-skip directives is invalid"
+	if { $opts(noskip) != "" } then {
+	    perror "$testname: mixing skip and noskip directives is invalid"
 	    unresolved $testname
 	    return
 	}
@@ -452,9 +452,9 @@ proc run_dump_test { name {extra_options {}} } {
 	    if {[match_target $glob]} { return }
 	}
     }
-    if { $opts(not-skip) != "" } then {
+    if { $opts(noskip) != "" } then {
 	set skip 1
-	foreach glob $opts(not-skip) {
+	foreach glob $opts(noskip) {
 	    if {[match_target $glob]} {
 		set skip 0
 		break
@@ -475,8 +475,8 @@ proc run_dump_test { name {extra_options {}} } {
 	    return
 	}
     }
-    if { $opts(not-target) != "" } then {
-	foreach glob $opts(not-target) {
+    if { $opts(notarget) != "" } then {
+	foreach glob $opts(notarget) {
 	    if {[match_target $glob]} {
 		unsupported $testname
 		return