riscv
/
binutils-gdb
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
Browse Source

gdb/doc/ 

2012-02-13  Pedro Alves  <palves@redhat.com>

	* gdb.texinfo (MIPS boards): Refer to mips-elf instead of
	mips-idt-ecoff.

gdb/testsuite/
2012-02-13  Pedro Alves  <palves@redhat.com>

	* config/mips-idt.exp: Delete.
	* gdb.base/a2-run.exp: Remove mips-idt xfails.
	* gdb.base/bitfields.exp: Remove mips-idt restarts.
	* gdb.base/break.exp: Remove mips-idt references.
	* gdb.base/chng-syms.exp: Ditto.
	* gdb.base/default.exp: Ditto.
	* gdb.base/funcargs.exp (funcargs_reload): Delete.
	(top level): Don't call it.
	* gdb.base/opaque.exp: Remove mips-idt restarts.
	* gdb.base/ptype.exp: Remove mips-idt xfails.
	* gdb.base/scope.exp: Remove mips-idt restarts.
	* gdb.base/sepdebug.exp: Remove mips-idt references.
	* gdb.base/watchpoint.exp (maybe_clean_restart)
	(maybe_reinitialize): Delete.
	(test_disabling_watchpoints, test_disabling_watchpoints)
	(test_watchpoint_triggered_in_syscall)
	(test_watchpoint_and_breakpoint, test_inaccessible_watchpoint):
	Don't call them.
cygwin-64bit-branch
Pedro Alves 14 years ago
parent
e1741a1ed1
commit
cc30c4bd19
14 changed files with 34 additions and 163 deletions
Whitespace
Show all changes Ignore whitespace when comparing lines Ignore changes in amount of whitespace Ignore changes in whitespace at EOL
Split View
Diff Options
Show Stats Download Patch File Download Diff File
  1. 5
      gdb/doc/ChangeLog
  2. 4
      gdb/doc/gdb.texinfo
  3. 21
      gdb/testsuite/ChangeLog
  4. 4
      gdb/testsuite/gdb.base/a2-run.exp
  5. 22
      gdb/testsuite/gdb.base/bitfields.exp
  6. 3
      gdb/testsuite/gdb.base/break.exp
  7. 7
      gdb/testsuite/gdb.base/chng-syms.exp
  8. 10
      gdb/testsuite/gdb.base/default.exp
  9. 30
      gdb/testsuite/gdb.base/funcargs.exp
  10. 10
      gdb/testsuite/gdb.base/opaque.exp
  11. 6
      gdb/testsuite/gdb.base/ptype.exp
  12. 28
      gdb/testsuite/gdb.base/scope.exp
  13. 3
      gdb/testsuite/gdb.base/sepdebug.exp
  14. 44
      gdb/testsuite/gdb.base/watchpoint.exp

5
gdb/doc/ChangeLog
View File

@ -1,3 +1,8 @@
2012-02-13 Pedro Alves <palves@redhat.com>
* gdb.texinfo (MIPS boards): Refer to mips-elf instead of
mips-idt-ecoff.
2012-02-09 Yao Qi <yao@codesourcery.com>
* gdb.texinfo (Symbols In Python): Add missing `@end defvar'.

4
gdb/doc/gdb.texinfo
View File

@ -19190,7 +19190,7 @@ Show MicroBlaze-specific debugging level.
@cindex MIPS boards
@value{GDBN} can use the MIPS remote debugging protocol to talk to a
MIPS board attached to a serial line. This is available when
you configure @value{GDBN} with @samp{--target=mips-idt-ecoff}.
you configure @value{GDBN} with @samp{--target=mips-elf}.
@need 1000
Use these @value{GDBN} commands to specify the connection to your target board:
@ -19295,7 +19295,7 @@ waiting for an acknowledgment of a packet with the @code{set
retransmit-timeout @var{seconds}} command. The default is 3 seconds.
You can inspect both values with @code{show timeout} and @code{show
retransmit-timeout}. (These commands are @emph{only} available when
@value{GDBN} is configured for @samp{--target=mips-idt-ecoff}.)
@value{GDBN} is configured for @samp{--target=mips-elf}.)
The timeout set by @code{set timeout} does not apply when @value{GDBN}
is waiting for your program to stop. In that case, @value{GDBN} waits

21
gdb/testsuite/ChangeLog
View File

@ -1,3 +1,24 @@
2012-02-13 Pedro Alves <palves@redhat.com>
* config/mips-idt.exp: Delete.
* gdb.base/a2-run.exp: Remove mips-idt xfails.
* gdb.base/bitfields.exp: Remove mips-idt restarts.
* gdb.base/break.exp: Remove mips-idt references.
* gdb.base/chng-syms.exp: Ditto.
* gdb.base/default.exp: Ditto.
* gdb.base/funcargs.exp (funcargs_reload): Delete.
(top level): Don't call it.
* gdb.base/opaque.exp: Remove mips-idt restarts.
* gdb.base/ptype.exp: Remove mips-idt xfails.
* gdb.base/scope.exp: Remove mips-idt restarts.
* gdb.base/sepdebug.exp: Remove mips-idt references.
* gdb.base/watchpoint.exp (maybe_clean_restart)
(maybe_reinitialize): Delete.
(test_disabling_watchpoints, test_disabling_watchpoints)
(test_watchpoint_triggered_in_syscall)
(test_watchpoint_and_breakpoint, test_inaccessible_watchpoint):
Don't call them.
2012-02-12 Jan Kratochvil <jan.kratochvil@redhat.com>
* gdb.server/server-exec-info.exp: New file.

4
gdb/testsuite/gdb.base/a2-run.exp
View File

@ -107,7 +107,7 @@ if [istarget "*-*-vxworks*"] then {
verbose "Timeout is now $timeout seconds" 2
gdb_expect -re "$gdb_prompt $" {}
} else {
setup_xfail "mips-idt-*" "arm-*-coff"
setup_xfail "arm-*-coff"
gdb_run_cmd 5
gdb_expect {
-re ".*120.*$gdb_prompt $"\
@ -118,7 +118,6 @@ if [istarget "*-*-vxworks*"] then {
}
# Run again with same arguments.
setup_xfail "mips-idt-*"
gdb_run_cmd
if [istarget "*-*-vxworks*"] then {
@ -185,7 +184,6 @@ if [istarget "*-*-vxworks*"] then {
}
# Use "set args" command to specify an argument and run again.
setup_xfail "mips-idt-*"
if [istarget "*-*-vxworks*"] then {
gdb_test_no_output "set args vxmain \"6\""
} else {

22
gdb/testsuite/gdb.base/bitfields.exp
View File

@ -253,29 +253,7 @@ gdb_load ${binfile}
gdb_test_no_output "set print sevenbit-strings"
bitfield_uniqueness
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
bitfield_containment
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
bitfield_unsignedness
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
bitfield_signedness
bitfield_at_offset

3
gdb/testsuite/gdb.base/break.exp
View File

@ -355,9 +355,6 @@ gdb_test "disable \$1foo" \
# handle arguments.
# Huh? There doesn't *appear* to be anything that passes arguments
# below.
if [istarget "mips-idt-*"] then {
return
}
#
# run until the breakpoint at main is hit. For non-stubs-using targets.

7
gdb/testsuite/gdb.base/chng-syms.exp
View File

@ -18,13 +18,6 @@
# Test that GDB cleans up properly after errors that result when a
# breakpoint is reset.
# IDT/SIM apparently doesn't have enough file descriptors to allow the
# problem checked by this test to occur.
if [istarget "mips-idt-*"] {
return 0;
}
set testfile "chng-syms"
set srcfile ${testfile}.c
set binfile ${objdir}/${subdir}/${testfile}

10
gdb/testsuite/gdb.base/default.exp
View File

@ -39,7 +39,6 @@ gdb_test "append binary memory" "Missing filename\."
gdb_test "append binary value" "Missing filename\."
if !$use_gdb_stub {
setup_xfail "mips-idt-*"
gdb_test_multiple "attach" "attach" {
-re "Argument required .(process-id|program) to attach.*$gdb_prompt $"\
{ pass "attach" }
@ -61,7 +60,6 @@ if !$use_gdb_stub {
}
setup_xfail "mips-idt-*"
gdb_test "backtrace" "No stack."
# ba and bac are no longer unique command prefixes. So these tests
@ -69,18 +67,14 @@ if !$use_gdb_stub {
# GDB needs to be fixed to map unique alias here for ba bac.
#
foreach i "bt ba bac" {
setup_xfail "mips-idt-*"
gdb_test $i "No stack." "backtrace \"$i\" abbreviation"
}
} else {
warning "Skipping backtrace and break tests because of GDB stub."
}
# This works on the MIPS IDT board, but confuses future tests.
if ![istarget "mips-idt-*"] then {
gdb_test "continue" "The program is not being run." "continue"
gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
}
gdb_test "continue" "The program is not being run." "continue"
gdb_test "c" "The program is not being run." "continue \"c\" abbreviation"
#test call
gdb_test "call" "The history is empty..*" "call"

30
gdb/testsuite/gdb.base/funcargs.exp
View File

@ -965,21 +965,6 @@ proc recursive_structs_by_value {} {
gdb_stop_suppressing_tests;
}
proc funcargs_reload { } {
global objdir
global subdir
global binfile
global srcdir
if [istarget "mips-idt-*"] {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
}
#
# Test for accessing local stack variables in functions which call alloca
#
@ -1234,46 +1219,31 @@ gdb_test_multiple "show endian" "getting target endian" {
gdb_test_no_output "set print frame-arguments all"
integral_args
funcargs_reload
unsigned_integral_args
funcargs_reload
if {![target_info exists gdb,skip_float_tests]} {
float_and_integral_args
}
# Test _Complex type here if supported.
if [support_complex_tests] {
funcargs_reload
complex_args
funcargs_reload
complex_integral_args
if {![target_info exists gdb,skip_float_tests]} {
funcargs_reload
complex_float_integral_args
}
}
funcargs_reload
pointer_args
funcargs_reload
structs_by_reference
funcargs_reload
structs_by_value
funcargs_reload
discard_and_shuffle
funcargs_reload
shuffle_round_robin
funcargs_reload
recursive_structs_by_value
funcargs_reload
localvars_after_alloca
funcargs_reload
call_after_alloca
funcargs_reload
localvars_in_indirect_call
funcargs_reload
test_stepping_over_trampolines
set timeout $prev_timeout

10
gdb/testsuite/gdb.base/opaque.exp
View File

@ -134,11 +134,6 @@ gdb_test "ptype struct foo" \
# have learned during the static tests.
#
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
}
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
@ -189,11 +184,6 @@ gdb_test "ptype struct foo" \
# Now reload the symbols again so we forget about anything we might
# have learned reading the symbols during the previous tests.
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
}
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}

6
gdb/testsuite/gdb.base/ptype.exp
View File

@ -169,7 +169,7 @@ gdb_test "ptype red" "type = enum \{red, green, blue\}.*" "ptype unnamed enumera
# acts like whatis for basic types. If it is thought to be necessary to
# test both whatis and ptype for all the types, the tests should be
# merged into whatis.exp, or else maintenance will be a royal pain -kingdon
#setup_xfail "mips-idt-*" "mips-sgi-*"
#setup_xfail "mips-sgi-*"
#send "ptype v_char\n"
#gdb_expect {
# -re "type = char.*$gdb_prompt $" { pass "ptype char" }
@ -273,7 +273,7 @@ gdb_test "ptype v_int" "type = int.*" "ptype int"
#
# test ptype command with arrays
#
#setup_xfail "mips-idt-*" "mips-sgi-*"
#setup_xfail "mips-sgi-*"
#send "ptype v_char_array\n"
#gdb_expect {
# -re "type = char .2..*$gdb_prompt $" { pass "ptype char array" }
@ -374,7 +374,7 @@ gdb_test "ptype t_char_array" "type = (|unsigned )char \\\[0?\\\]"
##
## test ptype command with pointers
##
#setup_xfail "mips-idt-*" "mips-sgi-*"
#setup_xfail "mips-sgi-*"
#send "ptype v_char_pointer\n"
#gdb_expect {
# -re "type = char \*.*$gdb_prompt $" { pass "ptype char pointer" }

28
gdb/testsuite/gdb.base/scope.exp
View File

@ -552,37 +552,9 @@ gdb_test "print 'scope0.c'::filelocal" "= 1" \
"print 'scope0.c'::filelocal before run"
if [runto_main] then { test_at_main }
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
if [runto foo] then { test_at_foo }
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
if [runto bar] then { test_at_bar }
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
if [runto localscopes] then { test_at_localscopes }
if [istarget "mips-idt-*"] then {
# Restart because IDT/SIM runs out of file descriptors.
gdb_exit
gdb_start
gdb_reinitialize_dir $srcdir/$subdir
gdb_load ${binfile}
}
if [runto autovars] then { test_at_autovars }
if [istarget "*-*-vxworks*"] {

3
gdb/testsuite/gdb.base/sepdebug.exp
View File

@ -175,9 +175,6 @@ gdb_test "info break" \
# handle arguments.
# Huh? There doesn't *appear* to be anything that passes arguments
# below.
if [istarget "mips-idt-*"] then {
return
}
#
# run until the breakpoint at main is hit. For non-stubs-using targets.

44
gdb/testsuite/gdb.base/watchpoint.exp
View File

@ -92,40 +92,6 @@ proc initialize {} {
return 1
}
proc maybe_clean_restart { } {
# The IDT/sim monitor only has 8 (!) open files, of which it uses
# 4 (!). So we have to make sure one program exits before
# starting another one.
if [istarget "mips-idt-*"] then {
global testfile
global no_hw
clean_restart $testfile
if {$no_hw} {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
}
}
proc maybe_reinitialize { } {
# The IDT/sim monitor only has 8 (!) open files, of which it uses
# 4 (!). So we have to make sure one program exits before
# starting another one.
if [istarget "mips-idt-*"] then {
global testfile
global no_hw
clean_restart $testfile
if {$no_hw} {
gdb_test_no_output "set can-use-hw-watchpoints 0" ""
}
initialize
}
}
#
# Test simple watchpoint.
#
@ -246,8 +212,6 @@ proc test_disabling_watchpoints {} {
global decimal
global hex
maybe_reinitialize
gdb_test "info watch" "\[0-9]+\[ \]*.*watchpoint.*ival3.*" "watchpoints found in watchpoint/breakpoint table"
# Ensure that the watchpoint is disabled when we startup.
@ -312,8 +276,6 @@ proc test_disabling_watchpoints {} {
proc test_stepping {} {
global gdb_prompt
maybe_clean_restart
if [runto marker1] then {
gdb_test "watch ival2" ".*\[Ww\]atchpoint \[0-9\]*: ival2"
@ -473,8 +435,6 @@ proc test_watchpoint_triggered_in_syscall {} {
proc test_complex_watchpoint {} {
global gdb_prompt
maybe_clean_restart
if [runto marker4] then {
gdb_test "watch ptr1->val" ".*\[Ww\]atchpoint \[0-9\]*: ptr1->val"
gdb_test "break marker5" ".*Breakpoint.*"
@ -577,8 +537,6 @@ proc test_complex_watchpoint {} {
proc test_watchpoint_and_breakpoint {} {
global gdb_prompt
maybe_clean_restart
# This is a test for PR gdb/38, which involves setting a
# watchpoint right after you've reached a breakpoint.
@ -708,8 +666,6 @@ proc test_wide_location_2 {} {
proc test_inaccessible_watchpoint {} {
global gdb_prompt
maybe_clean_restart
# This is a test for watchpoints on currently inaccessible (but later
# valid) memory.

Write Preview
Loading…
Cancel
Save