Browse Source
* elf.c (_bfd_elf_make_dynamic_segment): New function, split out from ... (map_sections_to_segments): ... here. Use it. Assign a file position to the .dynamic section if it is not loadable, but part of the PT_DYNAMIC segment. * elf32-arm.h (elf32_arm_finish_dynamic_sections): Use file offsets, not VMAs, for the BPABI. Do not fill in the header in the .got.plt section for the BPABI. * elfarm-nabi.c (elf32_arm_symbian_modify_segment_map): Add a PT_DYNAMIC segment. (elf_backend_want_got_plt): Define to zero for Symbian OS. * emulparams/armsymbian.sh: Use armbpabi script. * scripttempl/armbpabi.sc: New script.jimb-rda-nptl-branch
Mark Mitchell
22 years ago
8 changed files with 609 additions and 34 deletions
@ -0,0 +1,435 @@ |
|||
# This variant of elf.sc is used for ARM BPABI platforms, like Symbian |
|||
# OS, where a separate postlinker will operated on the generated |
|||
# executable or shared object. |
|||
|
|||
# |
|||
# Unusual variables checked by this code: |
|||
# NOP - four byte opcode for no-op (defaults to 0) |
|||
# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not |
|||
# empty. |
|||
# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start |
|||
# INITIAL_READONLY_SECTIONS - at start of text segment |
|||
# OTHER_READONLY_SECTIONS - other than .text .init .rodata ... |
|||
# (e.g., .PARISC.milli) |
|||
# OTHER_TEXT_SECTIONS - these get put in .text when relocating |
|||
# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ... |
|||
# (e.g., .PARISC.global) |
|||
# OTHER_RELRO_SECTIONS - other than .data.rel.ro ... |
|||
# (e.g. PPC32 .fixup, .got[12]) |
|||
# OTHER_BSS_SECTIONS - other than .bss .sbss ... |
|||
# OTHER_SECTIONS - at the end |
|||
# EXECUTABLE_SYMBOLS - symbols that must be defined for an |
|||
# executable (e.g., _DYNAMIC_LINK) |
|||
# TEXT_START_SYMBOLS - symbols that appear at the start of the |
|||
# .text section. |
|||
# DATA_START_SYMBOLS - symbols that appear at the start of the |
|||
# .data section. |
|||
# OTHER_SDATA_SECTIONS - sections just after .sdata. |
|||
# OTHER_BSS_SYMBOLS - symbols that appear at the start of the |
|||
# .bss section besides __bss_start. |
|||
# DATA_PLT - .plt should be in data segment, not text segment. |
|||
# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement. |
|||
# BSS_PLT - .plt should be in bss segment |
|||
# TEXT_DYNAMIC - .dynamic in text segment, not data segment. |
|||
# EMBEDDED - whether this is for an embedded system. |
|||
# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set |
|||
# start address of shared library. |
|||
# INPUT_FILES - INPUT command of files to always include |
|||
# WRITABLE_RODATA - if set, the .rodata section should be writable |
|||
# INIT_START, INIT_END - statements just before and just after |
|||
# combination of .init sections. |
|||
# FINI_START, FINI_END - statements just before and just after |
|||
# combination of .fini sections. |
|||
# STACK_ADDR - start of a .stack section. |
|||
# OTHER_END_SYMBOLS - symbols to place right at the end of the script. |
|||
# SEPARATE_GOTPLT - if set, .got.plt should be separate output section, |
|||
# so that .got can be in the RELRO area. It should be set to |
|||
# the number of bytes in the beginning of .got.plt which can be |
|||
# in the RELRO area as well. |
|||
# |
|||
# When adding sections, do note that the names of some sections are used |
|||
# when specifying the start address of the next. |
|||
# |
|||
|
|||
# Many sections come in three flavours. There is the 'real' section, |
|||
# like ".data". Then there are the per-procedure or per-variable |
|||
# sections, generated by -ffunction-sections and -fdata-sections in GCC, |
|||
# and useful for --gc-sections, which for a variable "foo" might be |
|||
# ".data.foo". Then there are the linkonce sections, for which the linker |
|||
# eliminates duplicates, which are named like ".gnu.linkonce.d.foo". |
|||
# The exact correspondences are: |
|||
# |
|||
# Section Linkonce section |
|||
# .text .gnu.linkonce.t.foo |
|||
# .rodata .gnu.linkonce.r.foo |
|||
# .data .gnu.linkonce.d.foo |
|||
# .bss .gnu.linkonce.b.foo |
|||
# .sdata .gnu.linkonce.s.foo |
|||
# .sbss .gnu.linkonce.sb.foo |
|||
# .sdata2 .gnu.linkonce.s2.foo |
|||
# .sbss2 .gnu.linkonce.sb2.foo |
|||
# .debug_info .gnu.linkonce.wi.foo |
|||
# .tdata .gnu.linkonce.td.foo |
|||
# .tbss .gnu.linkonce.tb.foo |
|||
# |
|||
# Each of these can also have corresponding .rel.* and .rela.* sections. |
|||
|
|||
test -z "$ENTRY" && ENTRY=_start |
|||
test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
|||
test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT} |
|||
if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi |
|||
test -z "${ELFSIZE}" && ELFSIZE=32 |
|||
test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8" |
|||
test "$LD_FLAG" = "N" && DATA_ADDR=. |
|||
test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE="" |
|||
test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE="" |
|||
test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT |
|||
DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))" |
|||
DATA_SEGMENT_RELRO_END="" |
|||
DATA_SEGMENT_RELRO_GOTPLT_END="" |
|||
DATA_SEGMENT_END="" |
|||
if test -n "${COMMONPAGESIZE}"; then |
|||
DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})" |
|||
DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);" |
|||
if test -n "${SEPARATE_GOTPLT}"; then |
|||
DATA_SEGMENT_RELRO_GOTPLT_END=". = DATA_SEGMENT_RELRO_END (. + ${SEPARATE_GOTPLT});" |
|||
else |
|||
DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (.);" |
|||
fi |
|||
fi |
|||
INTERP=".interp 0 : { *(.interp) }" |
|||
PLT=".plt ${RELOCATING-0} : { *(.plt) }" |
|||
RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }" |
|||
DATARELRO=".data.rel.ro : { *(.data.rel.ro.local) *(.data.rel.ro*) }" |
|||
STACKNOTE="/DISCARD/ : { *(.note.GNU-stack) }" |
|||
if test -z "${NO_SMALL_DATA}"; then |
|||
SBSS=".sbss ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+PROVIDE (__sbss_start = .);} |
|||
${RELOCATING+PROVIDE (___sbss_start = .);} |
|||
*(.dynsbss) |
|||
*(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*}) |
|||
*(.scommon) |
|||
${RELOCATING+PROVIDE (__sbss_end = .);} |
|||
${RELOCATING+PROVIDE (___sbss_end = .);} |
|||
}" |
|||
SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }" |
|||
SDATA="/* We want the small data sections together, so single-instruction offsets |
|||
can access them all, and initialized data all before uninitialized, so |
|||
we can shorten the on-disk segment size. */ |
|||
.sdata ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+${SDATA_START_SYMBOLS}} |
|||
*(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*}) |
|||
}" |
|||
SDATA2=".sdata2 ${RELOCATING-0} : { *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*}) }" |
|||
REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) } |
|||
.rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }" |
|||
REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) } |
|||
.rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }" |
|||
REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) } |
|||
.rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }" |
|||
REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) } |
|||
.rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }" |
|||
else |
|||
NO_SMALL_DATA=" " |
|||
fi |
|||
test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" " |
|||
CTOR=".ctors ${CONSTRUCTING-0} : |
|||
{ |
|||
${CONSTRUCTING+${CTOR_START}} |
|||
/* gcc uses crtbegin.o to find the start of |
|||
the constructors, so we make sure it is |
|||
first. Because this is a wildcard, it |
|||
doesn't matter if the user does not |
|||
actually link against crtbegin.o; the |
|||
linker won't look for a file to match a |
|||
wildcard. The wildcard also means that it |
|||
doesn't matter which directory crtbegin.o |
|||
is in. */ |
|||
|
|||
KEEP (*crtbegin*.o(.ctors)) |
|||
|
|||
/* We don't want to include the .ctor section from |
|||
from the crtend.o file until after the sorted ctors. |
|||
The .ctor section from the crtend file contains the |
|||
end of ctors marker and it must be last */ |
|||
|
|||
KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .ctors)) |
|||
KEEP (*(SORT(.ctors.*))) |
|||
KEEP (*(.ctors)) |
|||
${CONSTRUCTING+${CTOR_END}} |
|||
}" |
|||
DTOR=".dtors ${CONSTRUCTING-0} : |
|||
{ |
|||
${CONSTRUCTING+${DTOR_START}} |
|||
KEEP (*crtbegin*.o(.dtors)) |
|||
KEEP (*(EXCLUDE_FILE (*crtend*.o $OTHER_EXCLUDE_FILES) .dtors)) |
|||
KEEP (*(SORT(.dtors.*))) |
|||
KEEP (*(.dtors)) |
|||
${CONSTRUCTING+${DTOR_END}} |
|||
}" |
|||
STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} : |
|||
{ |
|||
${RELOCATING+_stack = .;} |
|||
*(.stack) |
|||
}" |
|||
|
|||
# if this is for an embedded system, don't add SIZEOF_HEADERS. |
|||
if [ -z "$EMBEDDED" ]; then |
|||
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS" |
|||
else |
|||
test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}" |
|||
fi |
|||
|
|||
cat <<EOF |
|||
OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}", |
|||
"${LITTLE_OUTPUT_FORMAT}") |
|||
OUTPUT_ARCH(${OUTPUT_ARCH}) |
|||
ENTRY(${ENTRY}) |
|||
|
|||
${RELOCATING+${LIB_SEARCH_DIRS}} |
|||
${RELOCATING+/* Do we need any of these for elf? |
|||
__DYNAMIC = 0; ${STACKZERO+${STACKZERO}} ${SHLIB_PATH+${SHLIB_PATH}} */} |
|||
${RELOCATING+${EXECUTABLE_SYMBOLS}} |
|||
${RELOCATING+${INPUT_FILES}} |
|||
${RELOCATING- /* For some reason, the Solaris linker makes bad executables |
|||
if gld -r is used and the intermediate file has sections starting |
|||
at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld |
|||
bug. But for now assigning the zero vmas works. */} |
|||
|
|||
SECTIONS |
|||
{ |
|||
/* Read-only sections, merged into text segment: */ |
|||
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}} |
|||
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
|||
${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}} |
|||
${INITIAL_READONLY_SECTIONS} |
|||
.gnu.version ${RELOCATING-0} : { *(.gnu.version) } |
|||
.gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) } |
|||
.gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) } |
|||
|
|||
EOF |
|||
if [ "x$COMBRELOC" = x ]; then |
|||
COMBRELOCCAT=cat |
|||
else |
|||
COMBRELOCCAT="cat > $COMBRELOC" |
|||
fi |
|||
eval $COMBRELOCCAT <<EOF |
|||
.rel.init ${RELOCATING-0} : { *(.rel.init) } |
|||
.rela.init ${RELOCATING-0} : { *(.rela.init) } |
|||
.rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) } |
|||
.rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) } |
|||
.rel.fini ${RELOCATING-0} : { *(.rel.fini) } |
|||
.rela.fini ${RELOCATING-0} : { *(.rela.fini) } |
|||
.rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) } |
|||
.rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) } |
|||
${OTHER_READONLY_RELOC_SECTIONS} |
|||
.rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) } |
|||
.rela.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+*}) } |
|||
.rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) } |
|||
.rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) } |
|||
.rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) } |
|||
.rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) } |
|||
.rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) } |
|||
.rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) } |
|||
.rel.ctors ${RELOCATING-0} : { *(.rel.ctors) } |
|||
.rela.ctors ${RELOCATING-0} : { *(.rela.ctors) } |
|||
.rel.dtors ${RELOCATING-0} : { *(.rel.dtors) } |
|||
.rela.dtors ${RELOCATING-0} : { *(.rela.dtors) } |
|||
${REL_SDATA} |
|||
${REL_SBSS} |
|||
${REL_SDATA2} |
|||
${REL_SBSS2} |
|||
.rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) } |
|||
.rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) } |
|||
EOF |
|||
if [ -n "$COMBRELOC" ]; then |
|||
cat <<EOF |
|||
.rel.dyn ${RELOCATING-0} : |
|||
{ |
|||
EOF |
|||
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC |
|||
cat <<EOF |
|||
} |
|||
.rela.dyn ${RELOCATING-0} : |
|||
{ |
|||
EOF |
|||
sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC |
|||
cat <<EOF |
|||
} |
|||
EOF |
|||
fi |
|||
cat <<EOF |
|||
.rel.plt ${RELOCATING-0} : { *(.rel.plt) } |
|||
.rela.plt ${RELOCATING-0} : { *(.rela.plt) } |
|||
${OTHER_PLT_RELOC_SECTIONS} |
|||
|
|||
.init ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+${INIT_START}} |
|||
KEEP (*(.init)) |
|||
${RELOCATING+${INIT_END}} |
|||
} =${NOP-0} |
|||
|
|||
${DATA_PLT-${BSS_PLT-${PLT}}} |
|||
.text ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+${TEXT_START_SYMBOLS}} |
|||
*(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*}) |
|||
KEEP (*(.text.*personality*)) |
|||
/* .gnu.warning sections are handled specially by elf32.em. */ |
|||
*(.gnu.warning) |
|||
${RELOCATING+${OTHER_TEXT_SECTIONS}} |
|||
} =${NOP-0} |
|||
.fini ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+${FINI_START}} |
|||
KEEP (*(.fini)) |
|||
${RELOCATING+${FINI_END}} |
|||
} =${NOP-0} |
|||
${RELOCATING+PROVIDE (__etext = .);} |
|||
${RELOCATING+PROVIDE (_etext = .);} |
|||
${RELOCATING+PROVIDE (etext = .);} |
|||
${WRITABLE_RODATA-${RODATA}} |
|||
.rodata1 ${RELOCATING-0} : { *(.rodata1) } |
|||
${CREATE_SHLIB-${SDATA2}} |
|||
${CREATE_SHLIB-${SBSS2}} |
|||
${OTHER_READONLY_SECTIONS} |
|||
.eh_frame_hdr : { *(.eh_frame_hdr) } |
|||
.eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) } |
|||
.gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } |
|||
|
|||
/* Adjust the address for the data segment. We want to adjust up to |
|||
the same address within the page on the next page up. */ |
|||
${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}} |
|||
${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
|||
${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}} |
|||
|
|||
/* Exception handling */ |
|||
.eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) } |
|||
.gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.gcc_except_table)) *(.gcc_except_table.*) } |
|||
|
|||
/* Thread Local Storage sections */ |
|||
.tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) } |
|||
.tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} } |
|||
|
|||
/* Ensure the __preinit_array_start label is properly aligned. We |
|||
could instead move the label definition inside the section, but |
|||
the linker would then create the section even if it turns out to |
|||
be empty, which isn't pretty. */ |
|||
${RELOCATING+. = ALIGN(${ALIGNMENT});} |
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_start = .);}} |
|||
.preinit_array ${RELOCATING-0} : { *(.preinit_array) } |
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__preinit_array_end = .);}} |
|||
|
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_start = .);}} |
|||
.init_array ${RELOCATING-0} : { *(.init_array) } |
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__init_array_end = .);}} |
|||
|
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_start = .);}} |
|||
.fini_array ${RELOCATING-0} : { *(.fini_array) } |
|||
${RELOCATING+${CREATE_SHLIB-PROVIDE (__fini_array_end = .);}} |
|||
|
|||
${RELOCATING+${CTOR}} |
|||
${RELOCATING+${DTOR}} |
|||
.jcr ${RELOCATING-0} : { KEEP (*(.jcr)) } |
|||
|
|||
${RELOCATING+${DATARELRO}} |
|||
${OTHER_RELRO_SECTIONS} |
|||
${RELOCATING+${DATA_SEGMENT_RELRO_END}} |
|||
|
|||
${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}} |
|||
|
|||
.data ${RELOCATING-0} : |
|||
{ |
|||
${RELOCATING+${DATA_START_SYMBOLS}} |
|||
*(.data${RELOCATING+ .data.* .gnu.linkonce.d.*}) |
|||
KEEP (*(.gnu.linkonce.d.*personality*)) |
|||
${CONSTRUCTING+SORT(CONSTRUCTORS)} |
|||
} |
|||
.data1 ${RELOCATING-0} : { *(.data1) } |
|||
${WRITABLE_RODATA+${RODATA}} |
|||
${OTHER_READWRITE_SECTIONS} |
|||
${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}} |
|||
${CREATE_SHLIB+${SDATA2}} |
|||
${CREATE_SHLIB+${SBSS2}} |
|||
${SDATA} |
|||
${OTHER_SDATA_SECTIONS} |
|||
${RELOCATING+_edata = .;} |
|||
${RELOCATING+PROVIDE (edata = .);} |
|||
${RELOCATING+__bss_start = .;} |
|||
${RELOCATING+${OTHER_BSS_SYMBOLS}} |
|||
${SBSS} |
|||
${BSS_PLT+${PLT}} |
|||
.bss ${RELOCATING-0} : |
|||
{ |
|||
*(.dynbss) |
|||
*(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*}) |
|||
*(COMMON) |
|||
/* Align here to ensure that the .bss section occupies space up to |
|||
_end. Align after .bss to ensure correct alignment even if the |
|||
.bss section disappears because there are no input sections. */ |
|||
${RELOCATING+. = ALIGN(${ALIGNMENT});} |
|||
} |
|||
${OTHER_BSS_SECTIONS} |
|||
${RELOCATING+. = ALIGN(${ALIGNMENT});} |
|||
${RELOCATING+_end = .;} |
|||
${RELOCATING+${OTHER_BSS_END_SYMBOLS}} |
|||
${RELOCATING+PROVIDE (end = .);} |
|||
${RELOCATING+${DATA_SEGMENT_END}} |
|||
|
|||
/* These sections are not mapped under the BPABI. */ |
|||
.dynamic 0 : { *(.dynamic) } |
|||
.hash 0 : { *(.hash) } |
|||
.dynsym 0 : { *(.dynsym) } |
|||
.dynstr 0 : { *(.dynstr) } |
|||
${CREATE_SHLIB-${INTERP}} |
|||
|
|||
/* Stabs debugging sections. */ |
|||
.stab 0 : { *(.stab) } |
|||
.stabstr 0 : { *(.stabstr) } |
|||
.stab.excl 0 : { *(.stab.excl) } |
|||
.stab.exclstr 0 : { *(.stab.exclstr) } |
|||
.stab.index 0 : { *(.stab.index) } |
|||
.stab.indexstr 0 : { *(.stab.indexstr) } |
|||
|
|||
.comment 0 : { *(.comment) } |
|||
|
|||
/* DWARF debug sections. |
|||
Symbols in the DWARF debugging sections are relative to the beginning |
|||
of the section so we begin them at 0. */ |
|||
|
|||
/* DWARF 1 */ |
|||
.debug 0 : { *(.debug) } |
|||
.line 0 : { *(.line) } |
|||
|
|||
/* GNU DWARF 1 extensions */ |
|||
.debug_srcinfo 0 : { *(.debug_srcinfo) } |
|||
.debug_sfnames 0 : { *(.debug_sfnames) } |
|||
|
|||
/* DWARF 1.1 and DWARF 2 */ |
|||
.debug_aranges 0 : { *(.debug_aranges) } |
|||
.debug_pubnames 0 : { *(.debug_pubnames) } |
|||
|
|||
/* DWARF 2 */ |
|||
.debug_info 0 : { *(.debug_info .gnu.linkonce.wi.*) } |
|||
.debug_abbrev 0 : { *(.debug_abbrev) } |
|||
.debug_line 0 : { *(.debug_line) } |
|||
.debug_frame 0 : { *(.debug_frame) } |
|||
.debug_str 0 : { *(.debug_str) } |
|||
.debug_loc 0 : { *(.debug_loc) } |
|||
.debug_macinfo 0 : { *(.debug_macinfo) } |
|||
|
|||
/* SGI/MIPS DWARF 2 extensions */ |
|||
.debug_weaknames 0 : { *(.debug_weaknames) } |
|||
.debug_funcnames 0 : { *(.debug_funcnames) } |
|||
.debug_typenames 0 : { *(.debug_typenames) } |
|||
.debug_varnames 0 : { *(.debug_varnames) } |
|||
|
|||
${STACK_ADDR+${STACK}} |
|||
${OTHER_SECTIONS} |
|||
${RELOCATING+${OTHER_END_SYMBOLS}} |
|||
${RELOCATING+${STACKNOTE}} |
|||
} |
|||
EOF |
|||
Loading…
Reference in new issue