@ -6243,223 +6243,6 @@ else CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type
fi
gnulib_extra_configure_args=
# If large-file support is disabled, make sure gnulib does the same.
if test "$enable_largefile" = no; then
gnulib_extra_configure_args="$gnulib_extra_configure_args --disable-largefile"
fi
# Configure gnulib. We can't use AC_CONFIG_SUBDIRS as that'd expect
# to find the the source subdir to be configured directly under
# gdbserver/. We need to build gnulib under some other directory not
# "gnulib", to avoid the problem of both GDB and GDBserver wanting to
# build it in the same directory, when building in the source dir.
in_src="../gnulib"
in_build="build-gnulib-gdbserver"
in_extra_args="$gnulib_extra_configure_args"
# Remove --cache-file, --srcdir, and --disable-option-checking arguments
# so they do not pile up.
ac_sub_configure_args=
ac_prev=
eval "set x $ac_configure_args"
shift
for ac_arg
do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
--disable-option-checking)
;;
*)
case $ac_arg in
*\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_arg="--prefix=$prefix"
case $ac_arg in
*\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
# Pass --silent
if test "$silent" = yes; then
ac_sub_configure_args="--silent $ac_sub_configure_args"
fi
# Always prepend --disable-option-checking to silence warnings, since
# different subdirs can have different --enable and --with options.
ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
ac_popdir=`pwd`
ac_dir=$in_build
ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
$as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
$as_echo "$ac_msg" >&6
as_dir="$ac_dir"; as_fn_mkdir_p
case $srcdir in
[\\/]* | ?:[\\/]* )
ac_srcdir=$srcdir/$in_src ;;
*) # Relative name.
ac_srcdir=../$srcdir/$in_src ;;
esac
cd "$ac_dir"
ac_sub_configure=$ac_srcdir/configure
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative name.
ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
esac
if test -n "$in_extra_args"; then
# Add the extra args at the end.
ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
--cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
cd "$ac_popdir"
in_src="../libiberty"
in_build="build-libiberty-gdbserver"
in_extra_args=
# Remove --cache-file, --srcdir, and --disable-option-checking arguments
# so they do not pile up.
ac_sub_configure_args=
ac_prev=
eval "set x $ac_configure_args"
shift
for ac_arg
do
if test -n "$ac_prev"; then
ac_prev=
continue
fi
case $ac_arg in
-cache-file | --cache-file | --cache-fil | --cache-fi \
| --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
ac_prev=cache_file ;;
-cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
| --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* \
| --c=*)
;;
--config-cache | -C)
;;
-srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
ac_prev=srcdir ;;
-srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
;;
-prefix | --prefix | --prefi | --pref | --pre | --pr | --p)
ac_prev=prefix ;;
-prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*)
;;
--disable-option-checking)
;;
*)
case $ac_arg in
*\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
as_fn_append ac_sub_configure_args " '$ac_arg'" ;;
esac
done
# Always prepend --prefix to ensure using the same prefix
# in subdir configurations.
ac_arg="--prefix=$prefix"
case $ac_arg in
*\'*) ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;;
esac
ac_sub_configure_args="'$ac_arg' $ac_sub_configure_args"
# Pass --silent
if test "$silent" = yes; then
ac_sub_configure_args="--silent $ac_sub_configure_args"
fi
# Always prepend --disable-option-checking to silence warnings, since
# different subdirs can have different --enable and --with options.
ac_sub_configure_args="--disable-option-checking $ac_sub_configure_args"
ac_popdir=`pwd`
ac_dir=$in_build
ac_msg="=== configuring in $ac_dir (`pwd`/$ac_dir)"
$as_echo "$as_me:${as_lineno-$LINENO}: $ac_msg" >&5
$as_echo "$ac_msg" >&6
as_dir="$ac_dir"; as_fn_mkdir_p
case $srcdir in
[\\/]* | ?:[\\/]* )
ac_srcdir=$srcdir/$in_src ;;
*) # Relative name.
ac_srcdir=../$srcdir/$in_src ;;
esac
cd "$ac_dir"
ac_sub_configure=$ac_srcdir/configure
# Make the cache file name correct relative to the subdirectory.
case $cache_file in
[\\/]* | ?:[\\/]* ) ac_sub_cache_file=$cache_file ;;
*) # Relative name.
ac_sub_cache_file=$ac_top_build_prefix$cache_file ;;
esac
if test -n "$in_extra_args"; then
# Add the extra args at the end.
ac_sub_configure_args="$ac_sub_configure_args $in_extra_args"
fi
{ $as_echo "$as_me:${as_lineno-$LINENO}: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&5
$as_echo "$as_me: running $SHELL $ac_sub_configure $ac_sub_configure_args --cache-file=$ac_sub_cache_file --srcdir=$ac_srcdir" >&6;}
# The eval makes quoting arguments work.
eval "\$SHELL \"\$ac_sub_configure\" $ac_sub_configure_args \
--cache-file=\"\$ac_sub_cache_file\" --srcdir=\"\$ac_srcdir\"" ||
as_fn_error $? "$ac_sub_configure failed for $ac_dir" "$LINENO" 5
cd "$ac_popdir"
for ac_header in termios.h sys/reg.h string.h sys/procfs.h linux/elf.h fcntl.h signal.h sys/file.h sys/ioctl.h netinet/in.h sys/socket.h netdb.h netinet/tcp.h arpa/inet.h
do :
as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh`
@ -10840,7 +10623,7 @@ fi
GNULIB=build-gnulib-gdbserver /import
GNULIB=../gnulib /import
GNULIB_STDINT_H=
if test x"$STDINT_H" != x; then
Tom Tromey
7 years ago